One‐Pot Green Synthesis of Nitrogen‐Doped Carbon Quantum Dots for Cell Nucleus Labeling and Copper(II) Detection

The doping of nitrogen into carbon quantum dots is vitally important for improved fluorescence performance. However, the synthesis of nitrogen‐doped carbon quantum dots (N‐CQDs) is usually conducted under strong acid and high temperature, which results in environmental pollution and energy consumption. Herein, the N‐CQDs were prepared by a mild one‐pot hydrothermal process. The hydrothermal reaction temperature was adjusted to control the particle size, nitrogen/carbon atomic ratio, and quantum yield. The products were water soluble with a narrow particle size distribution and good dispersion stability over a wide pH range. The N‐CQDs could penetrate into the HeLa cell nucleus without any further functionalization. Moreover, the fluorescence of N‐CQDs could be selectively quenched by Cu²⁺, which suggested applications for the detection of Cu²⁺ in human plasma.     

Selenium‐Doped Carbon Quantum Dots for Free‐Radical Scavenging

Heteroatom doping is an effective way to adjust the fluorescent properties of carbon quantum dots. However, selenium‐doped carbon dots have rarely been reported, even though selenium has unique chemical properties such as redox‐responsive properties owing to its special electronegativity. Herein, a facile and high‐output strategy to fabricate selenium‐doped carbon quantum dots (Se‐CQDs) with green fluorescence (quantum yield 7.6 %) is developed through the hydrothermal treatment of selenocystine under mild conditions. Selenium heteroatoms endow the Se‐CQDs with redox‐dependent reversible fluorescence. Furthermore, free radicals such as ^.OH can be effectively scavenged by the Se‐CQDs. Once Se‐CQDs are internalized into cells, harmful high levels of reactive oxygen species (ROS) in the cells are decreased. This property makes the Se‐CQDs capable of protecting biosystems from oxidative stress.     

Kilogram-scale synthesis of carbon quantum dots for hydrogen evolution,sensing and bioimaging

The development of large-scale synthetic methods for high quality carbon quantum dots (CQDs) is fundamental to their applications. However, the macroscopic preparation and scale up synthetic of CQDs is still in its infancy. Here, we report a facile, green, kilogram-scale synthesis of high quality fluorescent CQDs derived from poplar leaves via a one-step hydrothermal method. Notably, the throughput of CQDs can reach a level up to as high as 1.4975 kg in one pot. The structure and properties of the as-prepared CQDs were assessed through TEM, XRD, XPS and various spectroscopic methods. The obtained high quality CQDs with a photoluminescent quantum yield of 10.64% showed remarkable stability in aqueous media, rich functional groups, high photostability, consistent photoluminescence within biological pH range and low cytotoxicity. On account of these good properties, we demonstrated the multifunctional application to electrocatalytic water splitting, Fe³⁺ sensing and bioimaging. It showed remarkable electrocatalytic activity, Fe³⁺ sensitivity and good biocompatibility. This study provides a green, facile, inexpensive and large-scale method for producing high quality CQDs, which provides application value for large-scale production of CQDs.     

Exceptionally Long‐Lived Luminescence Emitted from TbIII Ion Caged in an AgI–TbIII–Thiacalix[4]arene Supramolecular Complex in Water

The compositions and photophysical properties of luminescent ternary complexes of thiacalix[4]arene‐p‐sulfonate (TCAS), Tb^III, and Ag^I ions were determined. At pH 6, Ag^I₂?Tb^III₂?TCAS₂ formed. Moreover, at pH 10, in the presence of a 20‐fold excess of Ag^I and a 50‐fold excess of TCAS with respect to Tb^III, Ag^I₂?Tb^III?TCAS₂ formed as the main luminescent species. The structure of these complexes was proposed: two TCAS ligands are linked by two S–Ag^I–S linkages to adopt a double‐cone supramolecular structure. Furthermore, each Tb^III ion in the former complex accepts O^?, S, O^? donation, whereas in the latter, the Tb^III center accepts eightfold O^? donation. The luminescence quantum yield (Φ) of Ag^I₂?Tb^III₂?TCAS₂ (0.16) was almost equal to that of Tb^III?TCAS, but the luminescence lifetime τ of the former (=1.09 ms) was larger than that of the latter. For Ag^I₂?Tb^III?TCAS₂, the yield Φ (=0.11) was small, which is attributed to the low efficiency of photosensitization (η=0.11). However, the τ value (4.61 ms) was exceptionally large and almost equal to the natural luminescence lifetime of Tb^III (4.7 ms), which is due to the absence of coordinating water molecules (q=0.1). This is compatible with the proposed structure in which the Tb^III ion is shielded by a supramolecular cage that expels coordinated water molecules responsible for luminescence quenching.     

Carbon Quantum Dots from Pomelo Peel as Fluorescence Probes for “Turn-Off–On” High-Sensitivity Detection of Fe3+ and L-Cysteine

This study designed a “turn-off–on” fluorescence analysis method based on carbon quantum dots (CQDs) to detect metal ions and amino acids in real sample systems. CQDs were derived from green pomelo peel via a one-step hydrothermal process. The co-doped CQDs with N and S atoms imparted excellent optical properties (quantum yield = 17.31%). The prepared CQDs could be used as fluorescent “turn-off” probes to detect Fe³⁺ with a limit of detection of 0.086 µM, a linear detection range of 0.1–160 µM, and recovery of 83.47–106.53% in water samples. The quenched CQD fluorescence could be turned on after adding L-cysteine (L-Cys), which allowed detection of L-Cys with a detection limit of 0.34 µM and linear range of 0.4–85 µM. Recovery of L-Cys in amino acid beverage was 87.08–122.74%. Visual paper-based testing strips and cellulose/CQDs composite hydrogels could be also used to detect Fe³⁺ and L-Cys.     

Highly fluorescence Ta4C3 MXene quantum dots as fluorescent nanoprobe for heavy ion detection and stress monitoring of fluorescent hydrogels

Compared with other transition metal Mxene derived quantum dots（MQD_S）,Ta-based Mxene quantum dots have good functionality,but Ta-based Mxene quantum dots and their applications have not been studied so far.In this paper,we report for the first time the synthesis of high fluorescence quantum yield（QY） N-doped Ta₄ C₃ quantum dots（N-MQDs） using Ta₄ C₃ quantum dots in acid reflux damaged Ta₄ C₃ nanosheets as precursors and ...     

Integration of Metal-Organic Frameworks with Bi-Nanoprobes as Dual-Emissive Ratiometric Sensors for Fast and Highly Sensitive Determination of Food Hazards

Functional nanoprobes which detect specific food hazards quickly and simply are still in high demand in the field of food-safety inspection research. In the present work, a dual-emission metal-organic framework-based ratiometric fluorescence probe was integrated to detect Cu²⁺ and Pb²⁺ with rapidness and ease. Specifically, quantum dots (QDs) and carbon quantum dots (CQDs) were successfully embedded into zeolitic imidazolate framework-67 (ZIF-67) to function as a novel ratiometric fluorescent sensing composite. The ratiometric fluorescence signal of CQDs/QDs@ZIF-67 was significantly aligned with the concentration of metal ions to give an extremely low detection limit of 0.3324 nM. The highly sensitive and selective CQDs/QDs@ZIF-67 composite showed potential for the rapid and cost-effective detection of two metal ions.     

In Situ Generation of AgI Quantum Dots by the Confinement of A Supramolecular Polymer Network: A Novel Approach for Ultrasensitive Response

A novel approach for in situ generation of AgI quantum dots by the confinement of a pillar[5]arene‐based supramolecular polymer network has been successfully developed. The supramolecular polymer network ( SPN‐QP ) was constructed by using a bis‐8‐hydroxyquinoline‐modified pillar[5]arene derivative as a host ( H‐QP ) and a bis‐pyridinium‐modified decane as guest ( G‐PD ). The SPN‐QP shows ultrasensitive response for Ag⁺. The limit of detection is about 7.44×10^?9 M.^.Interestingly, when I^? was added to the SPN‐QP +Ag⁺ system, an unexpected strong warm‐white fluorescence emission was observed. After carefu investigation, we found that the strong warm‐white fluorescence emission could be attributed to the in situ formation of AgI quantum dots under the confinement of the supramolecular polymer network ( SPN‐QP ). Based on this approach, ultrasensitive detection of I^? was realized. The limit of detection for I^? is 4.40×10^?9 M. This study provides a new way for the preparation of quantum dots under the confinement of supramolecular polymer network as well as ultrasensitive detection of ions by in situ formation of quantum dots.     

Visible‐Light Photocatalytic Hydrogen Production Activity of ZnIn2S4 Microspheres Using Carbon Quantum Dots and Platinum as Dual Co‐catalysts

ZnIn₂S₄ microspheres (ZIS MSs) were for the first time decorated with carbon quantum dots (CQDs) and platinum nanoparticles (NPs) as dual co‐catalysts of for photocatalytic H₂ production. The ZIS MSs co‐loaded with CQDs and Pt exhibited a high photocatalytic H₂ production rate of 1032.2 μmol h^?1 g^?1 with an apparent quantum efficiency of 2.2 % (420 nm) in triethanolamine aqueous solution under visible‐light irradiation, which was much higher than the respective photocatalytic rates of pure ZIS, Pt loaded ZIS, and CQDs‐decorated ZIS. Such a great enhancement was attributed to the integrative effect of good crystallization, enhanced light absorption, high electrical conductivity of CQDs, and the vectorial electron transfer from ZIS to CQDs and Pt NPs (ZIS→CQDs→Pt).     

N-Doped carbon dots decorated ceria hollow spheres for enhanced activity of RhB degradation by visible light

The fabrication of low-cost and environmentally friendly photocatalysts with superior photodegradation efficiency remains one of the most pressing challenges in present research. Herein, we elaborately designed and synthesized a promising N-doped carbon quantum dots/CeO₂ hollow microsphere (NCQDs/h-CeO₂) photocatalyst with superior photoresponse property and photoactivity in visible light. The removal efficiencies of rhodamine B (RhB) under visible light illumination for NCQDs/h-CeO₂ exhibits a 30.3% enhancement compared with pure h-CeO₂. The results of EIS and PL imply that the excellent performance may be attributed to the strong synergistic effect between NCQDs and h-CeO_2, thus effectively promoting charge transfer and restraining the recombination of photogenerated holes and electrons. Accordingly, a synergistic photocatalysis mechanism was proposed to explain the photocatalytic reaction process. Besides, the NCQDs/h-CeO₂ exhibits better cycle stability than common CQDs/h-CeO₂ after a four-cycle photocatalytic test. Therefore, the NCQDs/h-CeO₂ may represent a promising strategy for the current water pollution issues.     

Mn,B, N co-doped graphene quantum dots for fluorescence sensing and biological imaging

The fluorescent and quantum yield (QY) of graphene quantum dots has been improved in recent years by doped atoms, which have good application prospects in fluorescence sensors and biological imaging. Here, a one-step hydrothermal synthesis method was used to synthesize manganese ions bonded with boron and nitrogen-doped graphene quantum dots (Mn-BN-GQDs). Compared with the boron and nitrogen co-doping graphene quantum dots (BN-GQDs), the fluorescence properties and quantum yield of Mn-BN-GQDs are significantly improved. Meanwhile, Mn-BN-GQDs exhibit low toxicity and good fluorescence imaging in living cells and has high selectivity to Fe³⁺ ions. Therefore, this experiment design Mn-BN-GQDs as a fluorescence sensor to detect Fe³⁺ ions, providing strong evidence for the advanced high sensitivity, selectivity and wide detection range of the Mn-BN-GQDs as a fluorescence sensor. These results indicate a dual linear relationship with good linear relationships in the 10–100 μM and 100–800 μM ranges, and limit of detection are 0.78 μM and 9.08 μM, respectively. Cellular imaging results demonstrate that Mn-BN-GQDs can be used as fluorescence sensors in biological imaging. Mn-BN-GQDs can be used for fluorescence sensing in biological imaging in combination with low toxicity, QY and quantum dot lifetime.     

碳点/β-环糊精复合物的制备及其用于尿酸检测的研究

以柠檬酸三钠为碳源,采用微波辅助制备碳点,用β-环糊精(β-CD)和碳点复合制备出碳点/β-CD复合物,并用荧光、紫外、红外光谱等进行表征.在pH=6.6的磷酸盐缓冲溶液中,尿酸可使碳点/β-CD复合物的荧光增强,探讨了反应时间、反应温度、缓冲溶液及pH对荧光增强程度的影响,建立了测定尿样中尿酸含量的方法.碳点/β-C...     

Synthesis,Structure and Magnetic Properties of a Cyano‐bridged Dinuclear Compound fac‐{[FeIII(pzTp)(CN)2(μ‐CN)] CuII(TPyA)}·Et2O·ClO4 (pzTp = tetrakis(pyrazolyl)borate)

The reaction of tricyanometallate precursor, (Bu₄N)[(pzTp)Fe(CN)₃] with Cu(ClO₄)₂·6H₂O in the presence of the tetradentate ligand tris(2‐pyridylmethyl)amine (TPyA) afford the dinuclear compound fac‐{[Fe^III(pzTp)(CN)₂(μ‐CN)]Cu^II(TPA)}·Et₂O·ClO₄ ( 1 ) (pzTp = tetrakis(pyrazolyl)borate). The molecular structure was determined by single‐crystal X‐ray diffraction. In compound 1 , the Fe^III ion is coordinated by three cyanide carbon atoms and three nitrogen atoms of pzTp anions. Whereas, the Cu^II ion is surrounded by one cyanide nitrogen atom and four nitrogen atoms from the TPyA ligand. Magnetic measurements indicate the intramolecular ferromagnetic coupling is observed for compound 1 , and it has S = 1 ground states.     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

A General Route to Prepare Low‐Ruthenium‐Content Bimetallic Electrocatalysts for pH‐Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH‐universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru‐M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH‐universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm^?2 in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm^?2. This performance is among the best catalytic activities reported for any platinum‐free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Green process of biomass waste derived fluorescent carbon quantum dots for biological imaging in vitro and in vivo

In the context of the circular economy, the huge amounts of biomass waste should be converted into value-added materials and energy to diminish pollution, atmospheric CO₂ levels and costly waste disposal. Biological imaging usually uses expensive and toxic chemicals e.g., organic dyes, semiconductor quantum dots, calling for safer, greener, cheaper fluorescent probes for biological imaging in vitro and in vivo. In these regards, carbon quantum dots (CQDs)-based fluorescent probes using biomass waste as a precursor may have much higher potential. Here we transformed the biomass waste of peach leaves into value-added fluorescent CQDs through a low-cost and green one-step hydrothermal process. The obtained CQDs show excitation-dependent photoluminescence properties with a fluorescence lifetime of 5.96 ns and a quantum yield of 7.71% without any passivation. In addition, the CQDs have a fine size of 1.9 nm with good hydrophilicity and high fluorescent stability over pH 4.0–11.0 range. Fluorescence imaging of in vitro cell cultures and in vivo with zebrafish show that CQDs possess ultra-low toxicity and remarkable performance for biological imaging. Even when CQDs present at a concentration as high as 500 µg/mL, the organism can still maintain more than 90% activity both in vitro and in vivo, and present bright fluorescence. The cheaper, greener, ultra-low toxicity CQDs developed in this work is a potential candidate for biological imaging in vitro and in vivo.     

A novel phosphorus oxide quantum dots as an emissive nanomaterial for inorganic ions screening and bioimaging

In this work, a novel blue-green fluorescence phosphorous oxide quantum dots (PO QDs) was synthesized by solvothermal method in N-methyl-2-pyrrolidone (NMP) solution without any protection treatment during synthesis. Upon excitation at 400 nm, PO QDs emitted blue-green fluorescence with quantum yield of 0.28. PO QDs exhibited the high inertness to air or moisture, the excellent water solubility, and stable emission intensity in a wide pH range and in high ionic strength solution. Interestingly, PO QDs could give the positive optical response to iron ions (Fe³⁺) and iodine ion (I⁻). The photoluminescence (PL) of PO QDs could be directly quenched by Fe³⁺. While I⁻ quenched the PO QDs PL by means of Ag⁺-mediated PO QDs system via the internal filtration effects (IFE) induced by the formation of AgI. Moreover, the biocompatibility and low toxicity of PO QDs verified in bean sprout and Hela cells indicated the promising application of PO QDs in medicine related fields. Furthermore, PO QDs could also be utilized in luminescent composite film for various application scenarios     

Fabricating Dual‐Atom Iron Catalysts for Efficient Oxygen Evolution Reaction: A Heteroatom Modulator Approach

Understanding the thermal aggregation behavior of metal atoms is important for the synthesis of supported metal clusters. Here, derived from a metal–organic framework encapsulating a trinuclear Fe^III₂Fe^II complex (denoted as Fe₃) within the channels, a well‐defined nitrogen‐doped carbon layer is fabricated as an ideal support for stabilizing the generated iron nanoclusters. Atomic replacement of Fe^II by other metal(II) ions (e.g., Zn^II/Co^II) via synthesizing isostructural trinuclear‐complex precursors (Fe₂Zn/Fe₂Co), namely the “heteroatom modulator approach”, is inhibiting the aggregation of Fe atoms toward nanoclusters with formation of a stable iron dimer in an optimal metal–nitrogen moiety, clearly identified by direct transmission electron microscopy and X‐ray absorption fine structure analysis. The supported iron dimer, serving as cooperative metal–metal site, acts as efficient oxygen evolution catalyst. Our findings offer an atomic insight to guide the future design of ultrasmall metal clusters bearing outstanding catalytic capabilities.     

Carbon Quantum Dot Implanted Graphite Carbon Nitride Nanotubes: Excellent Charge Separation and Enhanced Photocatalytic Hydrogen Evolution

Graphite carbon nitride (g‐C₃N₄) is a promising candidate for photocatalytic hydrogen production, but only shows moderate activity owing to sluggish photocarrier transfer and insufficient light absorption. Herein, carbon quantum dots (CQDs) implanted in the surface plane of g‐C₃N₄ nanotubes were synthesized by thermal polymerization of freeze‐dried urea and CQDs precursor. The CQD‐implanted g‐C₃N₄ nanotubes (CCTs) could simultaneously facilitate photoelectron transport and suppress charge recombination through their specially coupled heterogeneous interface. The electronic structure and morphology were optimized in the CCTs, contributing to greater visible light absorption and a weakened barrier of the photocarrier transfer. As a result, the CCTs exhibited efficient photocatalytic performance under light irradiation with a high H₂ production rate of 3538.3 μmol g^?1 h^?1 and a notable quantum yield of 10.94 % at 420 nm.     

Structure Determination of an AgI‐Mediated Cytosine–Cytosine Base Pair within DNA Duplex in Solution with 1H/15N/109Ag NMR Spectroscopy

The structure of an Ag^I‐mediated cytosine–cytosine base pair, C–Ag^I–C, was determined with NMR spectroscopy in solution. The observation of 1‐bond ¹⁵N‐¹⁰⁹Ag J‐coupling (¹J(¹⁵N,¹⁰⁹Ag): 83 and 84 Hz) recorded within the C–Ag^I–C base pair evidenced the N3–Ag^I–N3 linkage in C–Ag^I–C. The triplet resonances of the N4 atoms in C–Ag^I–C demonstrated that each exocyclic N4 atom exists as an amino group (?NH₂), and any isomerization and/or N4–Ag^I bonding can be excluded. The 3D structure of Ag^I–DNA complex determined with NOEs was classified as a B‐form conformation with a notable propeller twist of C–Ag^I–C (?18.3±3.0°). The ¹⁰⁹Ag NMR chemical shift of C‐Ag^I‐C was recorded for cytidine/Ag^I complex (δ(¹⁰⁹Ag): 442 ppm) to completed full NMR characterization of the metal linkage. The structural interpretation of NMR data with quantum mechanical calculations corroborated the structure of the C–Ag^I–C base pair.