Producing highly linear polyethylenes by using t‐butyl‐functionalized 2,6‐bis(imino)pyridylchromium(III) chlorides

A new family of t‐butyl substituted chromium(III) chloride complexes ( Cr1 – Cr6 ), bearing 2‐(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridine (aryl = 2,6‐Me₂C₆H₃ Cr1 , 2,6‐Et₂C₆H₃ Cr2 , 2,6‐i‐Pr₂C₆H₃ Cr3 , 2,4,6‐Me₃C₆H₂ Cr4 and 2,6‐Et₂‐4‐MeC₆H₂ Cr5 ) or 2,6‐bis(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)pyridine ( Cr6 ), has been synthesized by the reaction of CrCl₃·6H₂O in good yield with the corresponding ligands ( L1 – L6 ), respectively. The molecular structures of Cr2 and Cr6 were characterized by X‐ray diffraction highlighted a distorted octahedral geometry with the coordinated N,N,N ligand and three bonded chlorides around the metal center. On activation with modified methylaluminoxane or triisobutyl aluminum, most of the chromium precatalysts exhibit good activities toward ethylene polymerization and produce linear polyethylenes with high‐molecular weight. In addition, an in‐depth catalytic evaluation of Cr2 was conducted to investigate how cocatalyst type and amount, reaction temperature, and run time affect the catalytic activities and polymer properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1049–1058     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

Tuning Coordination in s‐Block Carbazol‐9‐yl Complexes

1,3,6,8‐Tetra‐tert‐butylcarbazol‐9‐yl and 1,8‐diaryl‐3,6‐di(tert‐butyl)carbazol‐9‐yl ligands have been utilized in the synthesis of potassium and magnesium complexes. The potassium complexes (1,3,6,8‐tBu₄carb)K(THF)₄ ( 1 ; carb=C₁₂H₄N), [(1,8‐Xyl₂‐3,6‐tBu₂carb)K(THF)]₂ ( 2 ; Xyl=3,5‐Me₂C₆H₃) and (1,8‐Mes₂‐3,6‐tBu₂carb)K(THF)₂ ( 3 ; Mes=2,4,6‐Me₃C₆H₂) were reacted with MgI₂ to give the Hauser bases 1,3,6,8‐tBu₄carbMgI(THF)₂ ( 4 ) and 1,8‐Ar₂‐3,6‐tBu₂carbMgI(THF) (Ar=Xyl 5 , Ar=Mes 6 ). Structural investigations of the potassium and magnesium derivatives highlight significant differences in the coordination motifs, which depend on the nature of the 1‐ and 8‐substituents: 1,8‐di(tert‐butyl)‐substituted ligands gave π‐type compounds ( 1 and 4 ), in which the carbazolyl ligand acts as a multi‐hapto donor, with the metal cations positioned below the coordination plane in a half‐sandwich conformation, whereas the use of 1,8‐diaryl substituted ligands gave σ‐type complexes ( 2 and 6 ). Space‐filling diagrams and percent buried volume calculations indicated that aryl‐substituted carbazolyl ligands offer a steric cleft better suited to stabilization of low‐coordinate magnesium complexes.     

Moderately branched ultra‐high molecular weight polyethylene by using N,N′‐nickel catalysts adorned with sterically hindered dibenzocycloheptyl groups

Five examples of unsymmetrical 1,2‐bis (arylimino) acenaphthene ( L1 – L5 ), each containing one N‐2,4‐bis (dibenzocycloheptyl)‐6‐methylphenyl group and one sterically and electronically variable N‐aryl group, have been used to prepare the N,N′‐nickel (II) halide complexes, [1‐[2,4‐{(C₁₅H₁₃}₂–6‐MeC₆H₂N]‐2‐(ArN)C₂C₁₀H₆]NiX₂ (X = Br: Ar = 2,6‐Me₂C₆H₃ Ni1 , 2,6‐Et₂C₆H₃ Ni2 , 2,6‐i‐Pr₂C₆H₃ Ni3 , 2,4,6‐Me₃C₆H₂ Ni4 , 2,6‐Et₂–4‐MeC₆H₂ Ni5 ) and (X = Cl: Ar = 2,6‐Me₂C₆H₃ Ni6 , 2,6‐Et₂C₆H₃ Ni7 , 2,6‐i‐Pr₂C₆H₃ Ni8 , 2,4,6‐Me₃C₆H₂ Ni9 , 2,6‐Et₂–4‐MeC₆H₂ Ni10 ), in high yield. The molecular structures Ni3 and Ni7 highlight the extensive steric protection imparted by the ortho‐dibenzocycloheptyl group and the distorted tetrahedral geometry conferred to the nickel center. On activation with either Et₂AlCl or MAO, Ni1 – Ni10 exhibited very high activities for ethylene polymerization with the least bulky Ni1 the most active (up to 1.06  ×  10⁷ g PE mol^?1(Ni) h^?1 with MAO). Notably, these sterically bulky catalysts have a propensity towards generating very high molecular weight polyethylene with moderate levels of branching and narrow dispersities with the most hindered Ni3 and Ni8 affording ultra‐high molecular weight material (up to 1.5  ×  10⁶ g mol^?1). Indeed, both the activity and molecular weights of the resulting polyethylene are among the highest to be reported for this class of unsymmetrical 1,2‐bis (imino)acenaphthene‐nickel catalyst.     

Synthesis and Crystal Structures of Sodium and Calcium ­Complexes with the Ligand N‐(2,6‐Dimethylphenyl)diphenylphosphinic Amide

The sodium complex [{Ph₂P(O)NH(2,6‐Me₂C₆H₃)}Na{Ph₂P(O)N(2,6‐Me₂C₆H₃)}]₂ ( 2 ) with the ligand N‐(2,6‐dimethylphenyl)diphenylphosphinic amide was synthesized involving the reaction of the neutral ligand [Ph₂P(O)NH(2,6‐Me₂C₆H₃)] ( 1 ) and sodium bis(trimethylsilyl)amide in toluene at 60 °C. The calcium complex [{Ph₂P(O)NH(2,6‐Me₂C₆H₃)CaI(THF)₃}I] ( 3 ) was obtained by the reaction between the neutral ligand 1 and anhydrous calcium diiodide in THF at ambient temperature. The solid‐state structures of the complexes were established by single‐crystal X‐ray diffraction analysis. In the solid‐state structure of 2 , the sodium ion is coordinated through the chelation of oxygen atom attached to the phosphorus atom. Two different P–N and P–O bond lengths are observed, which indicates that one ligand moiety is anionic, whereas the second one is neutral. In the solid‐state structure of 3 , the calcium atom adopts distorted octahedral arrangement through the ligation of two phosphinic amide ligands, three THF molecules, and one iodide ion.     

β‐Diketiminatoytterbium aryloxides: synthesis,structural characterization,and catalytic activity for addition of amines to carbodiimides

The steric effect of an aryloxido group on the synthesis and molecular structures of ytterbium aryloxides supported by β‐diketiminato ligand L (L = [N(2,6‐Me₂C₆H₃)C(Me)]₂CH^?) is reported. Reactions of β‐diketiminatoytterbium dichloride, LYbCl₂(THF)₂, with NaOAr¹ in THF (Ar¹ = [2,6‐^tBu₂‐4‐MeC₆H₂], THF = tetrahydrofuran) at 60°C gave the corresponding ytterbium complexes LYb(OAr¹)Cl(THF) ( 1 ) and LYb(OAr¹)₂ (1), depending on the molar ratio of dichloride to sodium aryloxide, respectively, while the same reactions with NaOAr² and NaOAr³ (Ar² = [2,6‐ⁱPr₂C₆H₃], Ar³ = [2,6‐Me₂C₆H₃]) in 1:1 or 1:2 molar ratio in THF afforded only bisaryloxide complexes LYb(OAr²)₂(THF) (1) and LYb(OAr³)₂(THF) ( 4 ) in good yields, respectively. Complexes 1 , 2 , 3 , 4 were fully characterized, including X‐ray crystal structure analyses. All the complexes are efficient pre‐catalysts for the catalytic addition of amines to carbodiimides giving guanidines. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of 2‐(N‐arylimino)pyrrolide nickel complexes and polymerization of methyl methacrylate

The synthesis, characterization and methyl methacrylate polymerization behaviors of 2‐(N‐arylimino)pyrrolide nickel complexes are described. The nickel complex [NN]₂Ni ( 1 , [NN] = [2‐C(H)NAr‐5‐tBu‐C₄H₂N]^?, Ar = 2,6‐iPr₂C₆H₃) was prepared in good yield by the reaction of [NN]Li with trans‐[Ni(Cl)(Ph)(PPh₃)₂] in THF. Reaction of [NN]Li with NiBr₂(DME) yielded the nickel bromide [NN]Ni(Br)[NNH] ( 2 ). Complexes 1 and 2 were characterized by ¹H NMR and IR spectroscopy and elemental analysis, and by X‐ray single crystal analysis. Both complexes, upon activation with methylaluminoxane, are highly active for the polymerization of methyl methacrylate to give high molecular weight polymethylmethacrylate with narrow molecular distributions. Copyright © 2009 John Wiley & Sons, Ltd.     

Styrene polymerization with nickel complexes/methylaluminoxane catalytic system

Polymerization of styrene using β‐diketiminate nickel (II) bromide complexes CH{C(R)NAr}₂NiBr (R = CH₃, Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; R = CH₃, Ar = 2,6‐Me₂C₆H₃, 2 ; R = CF₃, Ar = 2,6‐ⁱPr₂C₆H₃, 3 ; R = CF₃, Ar = 2,6‐Me₂C₆H₃, 4 ) in the presence of methylaluminoxane was studied. Compound 3 is the most active styrene polymerization catalyst of all the nickel complexes tested. The activity of these catalysts increases with increases in steric bulk of the substituents on the aryl rings. The electronic nature of the ligand backbone also affects the activity. Weight‐average molecular weight of the prepared polystyrene ranges from 21 000 to 72 000, with polydispersity indexes of 1.95–2.78. The microstructure of the obtained products is atactic polystyrenes from NMR analyses. Copyright © 2008 John Wiley & Sons, Ltd.     

Y,Lu, and Gd Complexes of NCO/NCS Pincer Ligands: Synthesis,Characterization, and Catalysis in the cis‐1,4‐Selective Polymerization of Isoprene

A series of NCO/NCS pincer precursors, 3‐(Ar²OCH₂)‐2‐Br‐(Ar¹N?CH)C₆H₃ ((^Ar1NCO^Ar2)Br, 3a , 3b , 3c , 3d ) and 3‐(2,6‐Me₂C₆H₃SCH₂)‐2‐Br‐(Ar¹N?CH)C₆H₃ ((^Ar1NCS^Me)Br, 4a and 4b ) were synthesized and characterized. The reactions of [^Ar1NCO^Ar2]Br/ [^Ar1NCS^Me]Br with nBuLi and the subsequent addition of the rare‐earth‐metal chlorides afforded their corresponding rare‐earth‐metal–pincer complexes, that is, [(^Ar1NCO^Ar2)YCl₂(thf)₂] ( 5a , 5b , 5c , 5d ), [(^Ar1NCO^Ar2)LuCl₂(thf)₂] ( 6a , 6d ), [(^Ar1NCO^Ar2)GdCl₂(thf)₂] ( 7 ), [{(^Ar1NCS^Me)Y(μ‐Cl)}₂{(μ‐Cl)Li(thf)₂(μ‐Cl)}₂] ( 8 , 9 ), and [{(^Ar1NCS^Me)Gd(μ‐Cl)}₂{(μ‐Cl)Li(thf)₂(μ‐Cl)}₂] ( 10 , 11 ). These diamagnetic complexes were characterized by ¹H and ¹³C NMR spectroscopy and the molecular structures of compounds 5a , 6a , 7 , and 10 were well‐established by X‐ray diffraction analysis. In compounds 5a , 6a , and 7 , all of the metal centers adopted distorted pentagonal bipyramidal geometries with the NCO donors and two oxygen atoms from the coordinated THF molecules in equatorial positions and the two chlorine atoms in apical positions. Complex 10 is a dimer in which the two equal moieties are linked by two chlorine atoms and two Cl? Li? Cl bridges. In each part, the gadolinium atom adopts a distorted pentagonal bipyramidal geometry. Activated with alkylaluminum and borate, the gadolinium and yttrium complexes showed various activities towards the polymerization of isoprene, thereby affording highly cis‐1,4‐selective polyisoprene, whilst the NCO? lutetium complexes were inert under the same conditions.     

Palladium(II) complexes of Y,C,Y‐chelated phosphines: synthesis,structure, and catalytic activity in Suzuki–Miyaura reaction

The phosphines L¹PPh₂ (1) and L²PPh₂ (2) containing different Y,C,Y‐chelating ligands, L¹ = 2,6‐(^tBuOCH₂)₂C₆H₃^? and L² = 2,6‐(Me₂NCH₂)₂C₆H₃^?, were treated with PdCl₂ and di‐µ‐chloro‐bis[2‐[(N,N‐dimethylamino)methyl]phenyl‐C,N]‐dipalladium(II) and yielded complexes trans‐{[2,6‐(^tBuOCH₂)₂C₆H₃]PPh₂}₂PdCl₂ (3), {[2,6‐(Me₂NCH₂)₂C₆H₃]PPh₂} PdCl₂ (4), {[2,6‐(^tBuOCH₂)₂C₆H₃]PPh₂}Pd(Cl)[2‐(Me₂NCH₂)C₆H₄] (5) and {[2,6‐(Me₂NCH₂)₂C₆H₃]PPh₂}Pd(Cl)[2‐(Me₂NCH₂)C₆H₄] (6) as the result of different ability of starting phosphines 1 and 2 to complex PdCl₂. Compounds 3–6 were characterized by ¹H, ¹³C, ³¹P NMR spectroscopy and ESI‐MS. The molecular structures of 3,4 and 6 were also determined by X‐ray diffraction analysis. The catalytic activity of complexes 3–6 was evaluated in the Suzuki‐Miyaura cross‐coupling reaction. Copyright © 2010 John Wiley & Sons, Ltd.     

Stable N‐Heterocyclic Carbene Adducts of Arylchlorosilylenes and Their Germanium Homologues

The first N‐heterocyclic carbene adducts of arylchlorosilylenes are reported and compared with the homologous germanium compounds. The arylsilicon(II) chlorides SiArCl(Im‐Me₄) [Ar=C₆H₃‐2,6‐Mes₂ (Mes=C₆H₂‐2,4,6‐Me₃), C₆H₃‐2,6‐Trip₂ (Trip=C₆H₂‐2,4,6‐iPr₃)] were obtained selectively on dehydrochlorination of the arylchlorosilanes SiArHCl₂ with 1,3,4,5‐tetramethylimidazol‐2‐ylidene (Im‐Me₄). The analogous arylgermanium(II) chlorides GeArCl(Im‐Me₄) were prepared by metathetical exchange of GeCl₂(Im‐Me₄) with LiC₆H₃‐2,6‐Mes₂ or addition of Im‐Me₄ to GeCl(C₆H₃‐2,6‐Trip₂). All compounds were fully characterized. Density functional calculations on ECl(C₆H₃‐2,6‐Trip₂)(Im‐Me₄), where E=Si, Ge, at different levels of theory show very good agreement between calculated and experimental bonding parameters, and NBO analyses reveal similar electronic structures of the two aryltetrel(II) chlorides. The low gas‐phase Gibbs free energy of bond dissociation of SiCl(C₆H₃‐2,6‐Trip₂)(Im‐Me₄) (Δ${G{{{\circ}\hfill \atop {\rm calcd}\hfill}}}$ =28.1 kJ mol^?1) suggests that the carbene adducts SiArCl(Im‐Me₄) may be valuable transfer reagents of the arylsilicon(II) chlorides SiArCl.     

Zwitterionic Base‐Stabilized Digermadistannacyclobutadiene and Tetragermacyclobutadiene

The syntheses of a zwitterionic base‐stabilized digermadistannacyclobutadiene and tetragermacyclobutadiene supported by amidinates and low‐valent germanium amidinate substituents are described. The reaction of the amidinate Ge^I dimer, [LGe:]₂ ( 1 , L=PhC(NtBu)₂), with two equivalents of the amidinate tin(II) chloride, [LSnCl] ( 2 ), and KC₈ in tetrahydrofuran (THF) at room temperature afforded a mixture of the zwitterionic base‐stabilized digermadistannacyclobutadiene, [L₂Ge₂Sn₂L′₂] ( 3 ; L′=LGe:), and the bis(amidinate) tin(II) compound, [L₂Sn:] ( 4 ). Compound 3 can also be prepared by the reaction of 1 with [L^ArSnCl] ( 5 , L^Ar=tBuC(NAr)₂, Ar=2,6‐iPr₂C₆H₃) in THF at room temperature. Moreover, the reaction of 1 with the “onio‐substituent transfer” reagent [4‐NMe₂‐C₅H₄NSiMe₃]OTf ( 8 ) in THF and 4‐(N,N‐dimethylamino)pyridine (DMAP) at room temperature afforded a mixture of the zwitterionic base‐stabilized tetragermacyclobutadiene, [L₄Ge₆] ( 9 ), the amidinium triflate, [PhC(NHtBu)₂]OTf ( 10 ), and Me₃SiSiMe₃ ( 11 ). X‐ray structural data and theoretical studies show conclusively that compounds 3 and 9 have a planar and rhombic charge‐separated structure. They are also nonaromatic.     

Reactions of Organic Azides with Half‐sandwich Complexes of Iridium: Preparation of Mono‐ and Bis(imine) Derivatives

Imine complexes [IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}{P(OR)₃}]BPh₄ ( 1 , 2 ) (Ar = C₆H₅, 4‐CH₃C₆H₄; R = Me, Et) were prepared by allowing chloro complexes [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] to react with benzyl azides ArCH₂N₃. Bis(imine) complexes [Ir(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}₂{P(OR)₃}](BPh₄)₂ ( 3 , 4 ) were also prepared by reacting [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] first with AgOTf and then with benzyl azide. Depending on the experimental conditions, treatment of the dinuclear complex [IrCl₂(η⁵‐C₅Me₅)]₂ with benzyl azide yielded mono‐ [IrCl₂(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}] ( 5 ) and bis‐[IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}₂]BPh₄ ( 6 ) imine derivatives. In contrast, treatment of chloro complexes [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] with phenyl azide C₆H₅N₃ gave amine derivatives [IrCl(η⁵‐C₅Me₅)(C₆H₅NH₂){P(OR)₃}]BPh₄ ( 7 , 8 ). The complexes were characterized spectroscopically (IR, NMR) and by X‐ray crystal structure determination of [IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)C₆H₄‐4‐CH₃}{P(OEt)₃}]BPh₄ ( 2b ).     

Molecular weight control of polyethylene waxes using a constrained imino‐cyclopenta[b]pyridyl‐nickel catalyst

Five examples of nickel(II) bromide complexes bearing N,N‐imino‐cyclopenta[b ]pyridines, [7‐(ArN)‐6,6‐Me₂C₈H₅N]NiBr₂ (Ar = 2,6‐Me₂C₆H₃ ( Ni1 ), 2,6‐Et₂C₆H₃ ( Ni2 ), 2,6‐i‐ Pr₂C₆H₃ ( Ni3 ), 2,4,6‐Me₃C₆H₂ ( Ni4 ), 2,6‐Et₂‐4‐MeC₆H₂ ( Ni5 )), have been prepared by the reaction of the corresponding ligand, L1 – L5 , with NiBr₂(DME) (DME = 1,2‐dimethoxyethane). On crystallization from bench dichloromethane, Ni1 underwent adventitious reaction with water to give the aqua salt, [ L1 NiBr(OH₂)₃][Br] ( Ni1' ). The molecular structures of Ni1' and Ni3 have been structurally characterized, the latter revealing a bromide‐bridged dimer. On activation with either MMAO or Et₂AlCl, Ni1 , Ni2 , Ni4, and Ni5 , all exhibited high activities for ethylene polymerization (up to 3.88 × 10⁶ g(PE) mol^?1(Ni) h^?1); the most sterically bulky Ni3 gave only low activity. Polyethylene waxes are a feature of the materials obtained which typically display low molecular weights (M _ws), narrow M _w distributions and unsaturated vinyl and vinylene functionalities. Notably, the catalyst comprising Ni1 /Et₂AlCl produced polyethylene with the lowest M _w, 0.67 kg mol^?1, which is less than any previously reported data for any class of cycloalkyl‐fused pyridine–nickel catalyst. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3494–3505     

Co‐catalyst effects on the thermal stability/activity of N,N,N‐Co ethylene polymerization Catalysts Bearing Fluoro‐Substituted N‐2,6‐dibenzhydrylphenyl groups

The unsymmetrical bis (arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐t‐BuC₆H₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N‐aryl group bedecked with ortho‐substituted fluorobenzhydryl groups, have been employed in the preparation of the corresponding five‐coordinate cobalt (II) chelates, LCoCl₂ ( Co1 – Co5 ); the symmetrical comparator [2,6‐{CMeN(2,6‐(4‐FC₆H₄)₂CH)₂–4‐t‐BuC₆H₂}₂C₅H₃N]CoCl₂ (Co6) is also reported. All cobaltous complexes are paramagnetic and have been characterized by ¹H/¹⁹F NMR spectroscopy, FT‐IR spectroscopy and elemental analysis. The molecular structures of Co3 and Co6 highlight the different degrees of steric protection given to the metal center by the particular N‐aryl group combination. Depending on the aluminoxane co‐catalyst employed to activate the cobalt precatalyst, distinct variations in thermal stability and activity of the catalyst towards ethylene polymerization were exhibited. In particular with MAO, the resultant catalysts reached their optimal performance at 70 °C delivering high activities of up to 10.1 × 10⁶ g PE (mol of Co)^?1 h^?1 with Co1  >  Co4  >  Co2  >  Co5  >  Co3 >>  Co6 . On the other hand, using MMAO, the catalysts operate most effectively at 30 °C but are by comparison less productive. In general, the polyethylenes were highly linear, narrowly disperse and displayed a wide range of molecular weights [M_w range: 18.5–58.7 kg mol^?1 (MAO); 206.1–352.5 kg mol^?1 (MMAO)].     

Halogenomercury Salts of Sterically Crowded Triazenides – Convenient Starting Materials for Redox‐Transmetallation Reactions

Diaryl‐substituted triazenides Ar(Ar′)N₃HgX [Ar/Ar′ = Dmp/Mph, X = Cl ( 2a ), Br ( 3a ), I ( 4a ); Ar/Ar′ = Dmp/Tph, X = Cl ( 2b ), I ( 4b ) with Mph = 2‐MesC₆H₄, Mes = 2,4,6‐Me₃C₆H₂, Tph = 2′,4′,6′‐triisopropylbiphenyl‐2‐yl and Dmp = 2,6‐Mes₂C₆H₃] were synthesized by salt‐metathesis reactions in ethyl ether from the readily available starting materials Ar(Ar′)N₃Li and HgX₂. These compounds may be used for redox‐transmetallation reactions with rare‐earth or alkaline earth metals. Thus, reaction of 4b or 2b with magnesium or ytterbium in tetrahydrofuran afforded the triazenides Dmp(Tph)N₃MX(thf) ( 5b : M = Mg, X = I; 6b : M = Yb, X = Cl) in good yield. All new compounds were characterized by melting point, ¹H and ¹³C NMR spectroscopy and for selected species by IR spectroscopy or mass spectrometry. In addition, the solid‐state structures of triazenides 2a , 2b , 3a , 4b , 5b and 6b were investigated by single‐crystal X‐ray diffraction.     

Bis(β‐diketiminato) lanthanide amides: synthesis,structure and catalysis for the polymerization of l‐lactide and ε‐caprolactone

Treatment of the chlorides (L^2,6‐iPr2_Ph)₂LnCl (L^2,6‐iPr2_Ph = [(2,6‐ⁱPr₂C₆H₃)NC(Me)CHC(Me)N(C₆H₅)]^?) with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃) afforded the monoamides (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Y ( 1 ), Yb ( 2 )) in good yields. Anhydrous LnCl₃ reacted with 2 equiv. of NaL^2,6‐iPr2_Ph in THF, followed by treatment with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃), giving the analogues (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Sm ( 3 ), Nd ( 4 )). Two monoamido complexes stabilized by two L^2‐Me ligands, (L^2‐Me)₂LnNH(2,6‐ⁱPr₂C₆H₃) (L^2‐Me = [N(2‐MeC₆H₄)C(Me)]₂CH)^?; Ln = Y ( 5 ), Yb ( 6 )), were also synthesized by the latter route. Complexes 1 , 2 , 3 , 4 , 5 , 6 were fully characterized, including X‐ray crystal structure analyses. Complexes 1 , 2 , 3 , 4 , 5 , 6 are isostructural. The central metal in each complex is ligated by two β‐diketiminato ligands and one amido group in a distorted trigonal bipyramid. All the complexes were found to be highly active in the ring‐opening polymerization of L‐lactide (L‐LA) and ε‐caprolactone (ε‐CL) to give polymers with relatively narrow molar mass distributions. The activity depends on both the central metal and the ligand (Yb < Y < Sm ≈ Nd and L^2‐Me < L^2,6‐iPr2_Ph). Remarkably, the binary 3/benzyl alcohol (BnOH) system exhibited a striking ‘immortal’ nature and proved able to quantitatively convert 5000 equiv. of L‐LA with up to 100 equiv. of BnOH per metal initiator. All the resulting PLAs showed monomodal, narrow distributions (M_w/M_n = 1.06 ? 1.08), with molar mass (M_n) decreasing proportionally with an increasing amount of BnOH. The binary 4/BnOH system also exhibited an ‘immortal’ nature in the polymerization of ε‐CL in toluene. Copyright © 2014 John Wiley & Sons, Ltd.     

Vinyl polymerization of norbornene by nickel(II) complexes bearing β‐diketiminate ligands

Norbornene polymerizations were carried out using nickel(II) bromide complexes CH{C(R)NAr}₂NiBr ( 1 , R = CH₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 2 , R = CH₃, Ar = 2, 6‐Me₂C₆H₃; 3 , R = CF₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 4 , R = CF₃, Ar = 2, 6‐Me₂C₆H₃) in the presence of methylaluminoxane. Compound 3 is the most active norbornene polymerization catalyst of all the nickel complexes tested. The activity of theses catalysts increases with increases in steric bulk of the substituents on the aryl rings. The electronic nature of the ligand backbone also affects the activity. The resulting polynorbornenes are vinyl type by IR and NMR analyses. Copyright © 2007 John Wiley & Sons, Ltd.     

Bimetallic Rare Earth Alkyl Complexes Bearing Bridged Amidinate Ligands: Synthesis and Activity for L-Lactide Polymerization

Four novel bridged‐amidines H₂L {1,4‐R¹[C(=NR²)(NHR²)]₂ [R¹=C₆H₄, R²=2,6‐ⁱPr₂C₆H₃ (H₂L¹); R¹=C₆H₄, R²=2,6‐Me₂C₆H₃ (H₂L²); R¹=C₆H₁₀, R²=2,6‐ⁱPr₂C₆H₃ (H₂L³); R¹=C₆H₁₀, R²=2,6‐Me₂C₆H₃ (H₂L⁴)]} were synthesized in 65%–78% isolated yields by the condensation reaction of dicarboxylic acid with four equimolar amounts of amines in the presence of PPSE at 180°C. Alkane elimination reaction of Ln(CH₂SiMe₃)₃(THF)₂ (Ln=Y, Lu) with 0.5 equiv. of amidine in THF at room temperature afforded the corresponding bimetallic rare earth alkyl complexes (THF)(Me₃SiCH₂)₂LnL¹Ln(CH₂SiMe₃)₂(THF) [Ln=Y ( 1 ), Lu ( 2 )], (THF)(Me₃SiCH₂)₂LnL²Ln‐ (CH₂SiMe₃)₂(THF) [Ln=Y ( 3 ), Lu ( 4 )], (THF)(Me₃SiCH₂)₂YL³Y(CH₂SiMe₃)₂(THF) ( 5 ), (THF)(Me₃SiCH₂)₂YL⁴‐ Y(CH₂SiMe₃)₂(THF) ( 6 ) in 72% –80% isolated yields. These neutral complexes showed activity towards L‐lactide polymerization in toluene at 70°C to give high molecular weight (M>10⁴) and narrow molecular weight distribution (M_w/M_n≦1.40) polymers     

Synthesis,Characterization, and Syndio‐Specific Styrene Polymerization of Pyrrolyl‐Substituted Cyclopentadienyl Scandium Complexes

Acid‐base reaction of Sc(CH₂C₆H₄NMe₂‐o)₃ with 1 equiv. of pyrrolyl‐substituted cyclopentadienyl ligand C₄H₂Me₂NSiMe₂C₅Me₄H in toluene gave the half‐sandwich scandium bis(aminobenzyl) complex (C₄H₂Me₂NSiMe₂C₅Me₄)Sc(CH₂C₆H₄NMe₂‐o)₂ ( 2 ). Amine elimination between Sc[N(SiHMe₂)₂]₃(THF) and one equivalent of C₄H₂Me₂NSiMe₂C₅Me₄H afforded the scandium bis(silylamide) complex (C₄Me₂H₂NSiMe₂C₅Me₄)Sc[(NSiHMe₂)₂SiMe₂](THF) ( 3 ). Both scandium complexes 2 and 3 were characterized by elemental analysis, NMR spectroscopy, and single‐crystal X‐ray diffraction. 2 and 3 could serve as highly active precursors for styrene polymerization to give syndio‐tactic polystyrene (rrrrrr > 99 %).