Electropolymerization of O-Phenylenediamine in an Ionic Liquid

Ionic liquid like 1-ethyl-3-methylimidazolium bromine ([EMIM]Br) has been used as electrolyte for the electropolymerization of O-phenylenediamine at glassy carbon electrode by cyclic voltammetry. It is found that poly (O-phenylenediamine) film modified electrode has favorable electrochemical activity in acid solution.     

Electrochemical Synthesis of Polythiophene in an Ionic Liquid

Polythiophene(PTh) was prepared by the direct electrochemical synthesis in an ionic liquid ([BMIM]PF6) containing 0.1mol/L thiophene by cyclic voltammetry,constant potential and constant current techniques. It is found that smooth and blue-green PTh films can be obtained at a potential of ca. 1.75V(vs. Ag/AgCl) or a current of ca. 1.5mA cm^-2 in the ionic liquid.     

Facile Synthesis of Ureas in Ionic Liquid

The urea functional group is of importance in a wide range of biological compounds such as enzyme inhibitors1 and pseudopeptides2. Substituted ureas are widely applied in fine chemical industry, especially pesticides3 and pharmaceuticals4. Many investigations have been made to search for an efficient and practical method to synthesize ureas. The typical procedure for the synthesis of ureas is treating isocyanates with primary or secondary amines in organic solvents5. In the presence of trans…     

Electrochemical Nanoparticle Sizing Via Nano-Impacts: How Large a Nanoparticle Can be Measured?

The field of nanoparticle (NP) sizing encompasses a wide array of techniques, with electron microscopy and dynamic light scattering (DLS) having become the established methods for NP quantification; however, these techniques are not always applicable. A new and rapidly developing method that addresses the limitations of these techniques is the electrochemical detection of NPs in solution. The ‘nano-impacts’ technique is an excellent and qualitative in situ method for nanoparticle characterization. Two complementary studies on silver and silver bromide nanoparticles (NPs) were used to assess the large radius limit of the nano-impact method for NP sizing. Noting that by definition a NP cannot be larger than 100 nm in diameter, we have shown that the method quantitatively sizes at the largest limit, the lower limit having been previously reported as ∼6 nm.¹     

Electrochemical Reduction of Benzoylformic Acid in Ionic Liquid

Ionic Hquids possess a number of unique properties that makethem ideal electrolytes. Electrochical reduction of benzoyl-formic acid in room temperature ionic liquids as reaction media could be conducted with excellent performances without any ad-ditional supporting electrolyte. Electrolysis at glassy carbon electrode results in the formation of mandelic acid in 91% yield. And the electrochemical behavior of benzoylformic acid was investigated with the technique of cyclic voltammetry.     

Can an Elusive Platinum(III) Oxidation State be Exposed in an Isolated Complex?

Platinum(IV) complexes are extensively studied for their activity against cancer cells as potential substitutes for the widely used platinum(II) drugs. Pt^IV complexes are kinetically inert and need to be reduced to Pt^II species to play their pharmacological action, thus acting as prodrugs. The mechanism of the reduction step inside the cell is however still largely unknown. Gas‐phase activation of deprotonated platinum(IV) prodrugs was found to generate products in which platinum has a formal +3 oxidation state. IR multiple photon dissociation spectroscopy is thus used to obtain structural information helping to define the nature of both the platinum atom and the ligands. In particular, comparison of calculations at DFT, MP2 and CCSD levels with experimental results demonstrates that the localization of the radical is about equally shared between the d_xz orbital of platinum and the p_z of nitrogen on the amino group, the latter acting as a non‐innocent ligand.     

Determination of Cadmium in Human Serum and Blood Samples after Dispersive Liquid–Liquid Microextraction Using a Task-Specific Ionic Liquid

Task-specific ionic liquid dispersive liquid–liquid microextraction (TSIL-DLLME) is a simple and rapid preconcentration approach for the measurement of cadmium in serum and blood samples of human subjects. In this method a novel task-specific ionic liquid, trioctylmethyl ammonium thiosalicylate (TOMATS), which has dual characteristics as a chelating agent and extractive solvent, was investigated. TOMATS complexes with Cd due to the chelating effect of the ortho-positioned carboxylate relative to the thiol functionality. The assessment of the optimum values of variables including the pH, amount of reagents (TOMATS, diluents, Triton X114, and back extracting acid solution), temperature, and incubation time, which affect the recoveries of analyte by TSIL-DLLME method were studied. After enrichment experiments, acidic solution was used to back extract the metal ions from the ionic liquid rich phase and with determination by electrothermal atomic absorption spectrometry. Using the optimal experimental conditions, the limit of detection (3?s), precision (relative standard deviation), preconcentration, and enhancement factors of developed method for Cd were found to be 0.05?µg/L, greater than 5%, 62.5, and 52.8, respectively. To check the accuracy of the developed method, certified reference material of serum and blood were analyzed by the developed method, and the measured values of Cd were in good agreement with the certified values. The developed method was applied successfully to determine Cd in blood and serum samples of lymphatic cancer patients relative to healthy controls.     

Water-Induced Breaking of the Coulombic Ordering in a Room-Temperature Ionic Liquid Metal Complex

Control of ion arrangements in ionic liquids represents a major challenge owing to the presence of the predominant coulombic interactions between cationic and anionic ion species that forms the coulombic ordering. Here, water-induced ion rearrangement in a room-temperature ionic liquid (RT-IL) metal complex, (1-ethyl-3-methylimidazolium)₂[MnN(CN)₄], is demonstrated through coordinative interactions between anions. Solidification occurred, which was associated with the formation of a “separated” structure consisting of cation columns and anionic cyanide-bridged one-dimensional coordination polymers. The energy diagram is in accord with the resultant RT-IL incorporating mononuclear [MnN(CN)₄]²⁻ molecules being a kinetic phase stabilized by inter-ion repulsions of the anionic divalent metal complex moieties. Water acts to decrease the coulombic interactions, including repulsion, giving rise to breaking of the coulombic ordering arising from coordination bond formation in the IL phase.     

Researches on a Novel Method for Fluorination of Halopyridazine Derivatives in Ionic Liquid

A novel method for fluorination of halopyridazine derivatives with potassium fluoride was performed using a green chemistry procedure, including ionic liquid as an environmentally benign reaction medium and microwave irradiation with high yield.     

Can an eight π-electron bare ring be planar?

Here we explore in silico an alternative to make planar eight π-electron bare ring systems with substitutions of some cyclooctatetraene ring carbon atoms by heavier group 14 elements. We found that the most stable eight membered rings with formulae C(4)Si(4)H(8), C(4)Ge(4)H(8), and C(4)Sn(4)H(8) have a perfect planar structure, enhancing delocalization energy as compared to cot.     

Can nanofiltration be fully predicted by a model?

There is an increasing need for model-based tools to design membrane processes for new industrial applications or to optimise existing membrane installations. The advantage of such tools is that costs can be saved by reducing the number of expermiments. In this study, the requirements for a membrane filtration model, suitable for practical use, are summarised. It is investigated to what extent it is possible to set-up such a model with the current available literature and knowledge. A membrane filtration model has been set-up based on the Maxwell–Stefan transport equations. A Freundlich equation is used to describe the membrane charge by means of adsorption of ions. With the model the permeate flux and rejections of multi-component liquid feeds can be calculated as a function of membrane properties (mean pore size, porosity, thickness, surface charge characteristic) and feed pressure. With two NF-membranes (Desal 5DK and a prototype capillary type 2 membrane) rejection experiments have been carried out with glucose, single salt solutions (NaCl, CaCl₂, Na₂SO₄) and ternary ion mixtures of these salts. With the model the experimental flux-rejection curves can be fitted reasonably well. However, each salt mixture needs its own set of fitted parameters for the membrane charge isotherms. Furthermore, the fitted membrane charges are in contradiction with values from the literature obtained by electrokinetic measurements. Obviously, the membrane charge parameters have lost their physical meaning and are used to compensate for physical phenomena not included in the model. Extending the model with an electrostatic free energy term will be a step forward in development. Further research is needed to fulfil all requirements for the wide scope of industrial applications.     

Molybdenum Alkylidyne Silyloxy N-Heterocyclic Carbene Complexes – Highly Active Alkyne Metathesis Catalysts that can be Handled in Air

A series of molybdenum alkylidyne silyloxy N-heterocyclic carbene (NHC) complexes of the general formula [Mo(≡C(R))(OSiPh₃)₃(NHC)] (R=tBu, 4-methoxyphenyl, 2,4,6-trimethylphenyl; NHC = 1,3-diisopropylimidazol-2-ylidene, 1,3-dicyclohexylimidazol-2-ylidene, 1,3-dicyclohexyl-4,5-dihydroimidazol-2-ylidene, 1,3-dimethylimidazol-2-ylidene, 1,3-dimethyl-4,5-dichloroimidazol-2-ylidene) was synthesized. Single crystal X-ray analyses revealed that with increasing steric demand of the alkylidyne group, enhanced air-stability of the complexes in the solid-state is achieved with the most stable complex (R=2,4,6-trimethylphenyl, NHC = 1,3-diisopropylimidazol-2-ylidene) being stable in air for 24 h without showing signs of decomposition in ¹H NMR. In contrast to previously reported air-stable molybdenum-based complexes, the novel catalysts proved to be highly active in alkyne metathesis, allowing for turnover numbers (TONs) of up to 6000 without further activation, and tolerant towards several functional groups such as tosyl, ether, ester, thioether and nitro moieties. Their air stability allows for facile handling of the catalysts in air and even after exposure to ambient atmosphere for one week, the most stable representative still displayed high productivity in alkyne metathesis.     

Can enantiomers be separated in achiral chromatographic systems?

Consideration of chromatography of a nonracemic mixture on an achiral sorbent from a stereochemical point of view allows the claim that partial separation of the excess enantiomer zone from the racemate zone is possible only with analytes capable of self-associating under the conditions of the chromatographic column. It is from these positions that features of this process can be explained and conditions for its maximal proceeding formulated.     

Can ring strain be realized in momentum space?

An increased electron momentum density (EMD) at low momentum is proposed to be an indicator of ring strain, with the nature of the function tending toward a maximum. A p-space Hirshfeld atomic partitioning scheme is applied for analyzing the effect of strain on molecular EMDs. The Hirshfeld momentum densities for a strained system show an increase in the population for the carbons with the hydrogens becoming more positive in comparison with an unstrained reference molecule. The manifestation of strain in cage-like hydrocarbons such as tetrahedrane, cubane, prismane, etc. as well as their nitrogen-substituted analogues is clearly seen in terms of EMDs.     

Can glycoprofiling be helpful in detecting prostate cancer?

Glycans are chains of carbohydrates attached to proteins (glycoproteins and proteoglycans) or lipids (glycolipids). Glycosylation is a post-translational modification and glycans have a wide range of functions in the human body including involvement in oncological diseases. Change in a glycan structure can not only indicate the presence of a pathological process but, more importantly, in some cases also its stage. Thus, a glycan analysis has the potential to be an effective and reliable tool in cancer diagnostics. Lectins are proteins responsible for natural biorecognition of glycans; even carbohydrate moieties still attached to proteins or whole cells can be recognised by lectins, which makes them an ideal candidate for designing label-free biosensors for glycan analysis. This review seeks to summarise evidence that the glycoprofiling of biomarkers by lectin-based biosensors can be of significant help in detecting prostate cancer.     

Can octupolar molecules be poled by an external electric field?

Octupolar molecules are generally believed to be of potential use in developing nonlinear optical materials owing to the fact that they do not easily form molecular aggregates. This is often put against the conjectured drawback that electric fields have no poling, or ordering, effect for this class of molecules because of the lack of a permanent ground state dipole moment. In this paper, we analyze this notion in some detail and present results from molecular dynamics computer simulations of an ensemble of a prototypical octupolar molecule, the 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) molecule, dissolved in chloroform. It is found that TATB molecules indeed show rather significant dipole moments in solutions because of the dual action of the thermal motions of the atoms and the strong intermolecular interactions. Applied electric fields accordingly show significant effects on the orientations of the molecular dipole moments. We also find that TATB molecules can aggregate because of the strong hydrogen-bonding interactions between the molecules, though they lack a static permanent dipole moment. Thus, the simulation results for TATB molecules in solution present us with a totally different notion about the collective properties of octupolar molecules. Taking account of quantum chemistry results, we found that the collective molecular nonlinear optical (NLO) properties are enhanced after the onset of the electric field, showing significant anisotropic characteristics.     

The Ethylbenzene/Styrene Preferential Separation with Ionic Liquids in Liquid–Liquid Extraction

The objective of this work was to explore the feasibility of using ionic liquids (ILs), namely N-ethyl-N-methylmorpholinium dicyanamide, [EMMor][DCA], (3-hydroxypropyl)-1-methylmorpholinium dicyanamide, [N-C₃OHMMor][DCA], 1-(3-hydroxypropyl)-3-methylimidazolium dicyanamide, [N-C₃OHMIM][DCA], 1-(3-hydroxypropyl)pyridinium dicyanamide, [N-C₃OHPy][DCA], (3-cyanopropyl)pyridinium dicyanamide, [N-C₃CNPy][DCA], and (3-cyanopropyl)methylpyrrolidinium dicyanamide, [N-C₃CNMPyr][DCA] for the separation of ethylbenzene and styrene. The liquid–liquid equilibrium (LLE) data in ternary systems of {IL (1)?+?styrene (2)?+?ethylbenzene (3)} at T?=?298.15 K and ambient pressure is presented for the six ILs synthesized by us. The final chromatography analysis of the composition of tie-lines has shown that the studied ILs are not found in the raffinate phase and they show interesting results on the selectivity and solute distribution ratio for styrene extraction. A comparison of different ILs is presented for the studied separation problem. It was observed that the best separation selectivities were found for [N-C₃CNPy][DCA] (S_Av?=?2.38) and [N-C₃OHMMor][DCA] (S_Av?=?2.42) in comparison with other studied ILs in this work and those presented in the literature. While the data presented here are useful from a theoretical standpoint, the possibility of applications for these ILs in technological processes is questionable because of low solute distribution ratios, especially those calculated from the masses [N-C₃CNPy][DCA] (β_MAv?=?0.08) and [N-C₃OHMMor][DCA] (β_MAv?=?0.07). The experimental tie-lines were correlated with the non-random two liquid NRTL model.     

How many proteins can be identified in a 2DE gel spot within an analysis of a complex human cancer tissue proteome?

Two‐dimensional gel electrophoresis (2DE) in proteomics is traditionally assumed to contain only one or two proteins in each 2DE spot. However, 2DE resolution is being complemented by the rapid development of high sensitivity mass spectrometers. Here we compared MALDI‐MS, LC‐Q‐TOF MS and LC‐Orbitrap Velos MS for the identification of proteins within one spot. With LC‐Orbitrap Velos MS each Coomassie Blue‐stained 2DE spot contained an average of at least 42 and 63 proteins/spot in an analysis of a human glioblastoma proteome and a human pituitary adenoma proteome, respectively, if a single gel spot was analyzed. If a pool of three matched gel spots was analyzed this number further increased up to an average of 230 and 118 proteins/spot for glioblastoma and pituitary adenoma proteome, respectively. Multiple proteins per spot confirm the necessity of isotopic labeling in large‐scale quantification of different protein species in a proteome. Furthermore, a protein abundance analysis revealed that most of the identified proteins in each analyzed 2DE spot were low‐abundance proteins. Many proteins were present in several of the analyzed spots showing the ability of 2DE‐MS to separate at the protein species level. Therefore, 2DE coupled with high‐sensitivity LC‐MS has a clearly higher sensitivity as expected until now to detect, identify and quantify low abundance proteins in a complex human proteome with an estimated resolution of about 500 000 protein species. This clearly exceeds the resolution power of bottom‐up LC‐MS investigations.     

Can block copolymers be synthesized by a single-step chemoenzymatic route in supercritical carbon dioxide?

We demonstrate the single-step one-pot synthesis of block copolymers by simultaneous enzymatic ring-opening polymerization and chemically catalyzed atom transfer radical polymerization in supercritical carbon dioxide. Both catalyst systems function simultaneously under these conditions, providing a simple route to the formation of block copolymers of dissimilar monomers.