Photocatalytic Activity for Water Decomposition to Hydrogen over Nitrogen‐doped TiO2 Nanoparticle

Nitrogen-doped TiO2 nanoparticle photocatalysts were obtained by an annealing method with gaseous ammonia and nitrogen. The influence of dopant N on the crystal structure was characterized by XRD, XPS, BET, TEM and UV-Vis spectra. The results of XRD indicate that, the crystal phase transforms from anatase to rutile structure gradually with increase of annealing temperature from 300 to 700 ℃. XPS studies indicate that the nitrogen atom enters the TiO2 lattice and occupies the position of oxygen atom. Agglomeration of particles is found in TEM images after annealing. BET results show that the specific surface areas of N-doped samples from 44.61 to 38.27 m2/g are smaller than that of Degussa TiO2. UV-Vis spectra indicate that the absorption threshold shifts gradually with increase of annealing temperature, which shows absorption in the visible region. The influence of annealing condition on the photocatalytic property has been researched over water decomposition to hydrogen, indicating that nitrogen raises the photocatalytic activity for hydrogen evolution, and the modified TiO2 annealed for 2 h at 400 ℃ under gas of NH3/N2 (V/V＝1/2) mixture shows better efficiency of hydrogen evolution. Furthermore, the N-doped TiO2 nanoparticle catalysts have obvious visible light activity, evidenced by hydrogen evolution under visible light (λ＞400 nm) irradiation. However, the catalytic activity under visible light irradiation is absent for Degussa as reference and the N-doped TiO2 annealed at 700 ℃.     

Template‐free Fabrication of Hierarchical Macro‐/mesoporous N‐doped TiO2/graphene Oxide Composites with Enhanced Visible‐light Photocatalytic Activity

Hierarchical macro‐/mesoporous N‐doped TiO₂/graphene oxide (N‐TiO₂/GO) composites were prepared without using templates by the simple dropwise addition mixed solution of tetrabutyl titanate and ethanol containg graphene oxide (GO) to the ammonia solution, and then calcined at 350 °C. The as‐prepared samples were characterized by scanning electron microscopy (SEM), Brunauer‐Emmett‐Teller (BET) surface area, X‐ray diffraction (XRD), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and UV‐Vis absorption spectroscopy. The photocatalytic activity was evaluated by the photocatalytic degradation of methyl orange in an aqueous solution under visible‐light irradiation. The results show that N‐TiO₂/GO composites exhibited enhanced photocatalytic activity. GO content exhibited an obvious influence on photocatalytic performance, and the optimal GO addition content was 1 wt%. The enhanced photocatalytic activity could be attributed to the synergetic effects of three factors including the improved visible light absorption, the hierarchical macro‐mesoporous structure, and the efficient charge separation by GO.     

Nitrogen‐doped graphene‐cerium oxide (NG‐CeO2) photocatalyst for the photodegradation of methylene blue in waste water

This study shows a facile approach for the preparation of CeO₂ nanoparticles decorated with porous nitrogen‐doped graphene (NG) nanosheets for effective photocatalytic degradation of methylene blue (MB). NG nanosheets were first synthesized using a hydrothermal method and then nitrogen‐doped graphene‐cerium oxide (NG‐CeO₂) was prepared through mixing of cerium nitrate with different concentrations of NG under ultrasonication followed by hydrothermal treatment. The synthesized nanocomposites were characterized using X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FE‐SEM). The photocatalytic activity of the synthesized nanocomposites was analyzed against MB dye. Results showed that the nanocomposites of NG‐CeO₂ have an average particle size of 20 nm. The as‐prepared NG‐CeO₂ nanocomposites exhibited outstanding photocatalytic activity for dye degradation under visible light irradiation, which could be attributed to synergistic effects between the NG nanosheets and CeO₂. The quantum of photodegradation increases with the increase of the NG content in the nanocomposites.     

Facile fabrication of ZnO/N‐doped helical carbon nanotubes composites with enhanced photocatalytic activity toward organic pollutant degradation

Novel ZnO/N‐doped helical carbon nanotubes (ZnO/N‐HCNTs) composites were successfully synthesized via a facile chemical precipitation approach at room temperature. The sample was well characterized by X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDS), transmission electron microscopy (TEM) and ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS). The photocatalytic activity was evaluated in the degradation of methylene blue (MB) aqueous solution under UV light irradiation. It is found that ZnO nanoparticles were highly and uniformly anchored on the surface and inner tubes of the N‐HCNTs with size of about 5 nm, and significantly enhanced the photocatalytic activity compared to pure ZnO. The enhanced photocatalytic activity of ZnO/N‐HCNTs composites can be ascribed to the integrative synergistic effect of effective interfacial hybridization between N‐HCNTs and ZnO nanoparticles and the prolonged lifetime of photogenerated electron–hole pairs. Moreover, the ZnO/N‐HCNTs could be easily recycled without any obvious decrease in photocatalytic activity and could be promote their application in the area of environmental remediation.     

Characterization of Titanium Dioxide Doped with Nitrogen and Sulfur and its Photocatalytic Appraisal for Degradation of Phenol and Methylene Blue

The degradation of organic dyes in the presence of modified TiO₂ is still under intensive investigation. We report here an evaluation of the photocatalytic activity of nitrogen‐ (N‐) and sulfur‐ (S‐) doped TiO₂ for the degradation of phenol and methylene blue (MB). N‐doped TiO₂ (N–TiO₂), S‐doped TiO₂ (S–TiO₂), and N–S‐doped TiO₂ (N–S–TiO₂) were prepared using the sol–gel method. The photocatalytic activity was evaluated in a batch reactor using phenol and MB as models of pollutants. In addition, this investigation was performed using a household lamp as the visible light source. Properties of the synthesized materials in terms of Brunauer–Emmett–Teller (BET) surface analysis, field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and photocatalytic ability were examined. Our study shows that N–S–TiO₂ exhibits better photocatalytic degradation ability for all the considered dyes compared to the other doped TiO₂ materials. In conclusion, we have successfully prepared and evaluated the photocatalytic activity of N‐ and S‐doped TiO₂ for the degradation of phenol and MB using an ordinary household lamp.     

Samarium and Nitrogen Co‐Doped Bi2WO6 Photocatalysts: Synergistic Effect of Sm3+/Sm2+ Redox Centers and N‐Doped Level for Enhancing Visible‐Light Photocatalytic Activity

Samarium and nitrogen co‐doped Bi₂WO₆ nanosheets were successfully synthesized by using a hydrothermal method. The crystal structures, morphology, elemental compositions, and optical properties of the prepared samples were investigated. The incorporation of samarium and nitrogen ions into Bi₂WO₆ was proved by X‐ray diffraction, energy dispersive X‐ray spectroscopy, and X‐ray photoelectron spectroscopy. UV/Vis diffuse reflectance spectroscopy indicated that the samarium and nitrogen co‐doped Bi₂WO₆ possessed strong visible‐light absorption. Remarkably, the samarium and nitrogen co‐doped Bi₂WO₆ exhibited higher photocatalytic activity than single‐doped and pure Bi₂WO₆ under visible‐light irradiation. Radical trapping experiments indicated that holes (h⁺) and superoxide radicals ( ^. O₂^?) were the main active species. The results of photoluminescence spectroscopy and photocurrent measurements demonstrated that the recombination rate of the photogenerated electrons and holes pairs was greatly depressed. The enhanced activity was attributed to the synergistic effect of the in‐built Sm³⁺/Sm²⁺ redox pair centers and the N‐doped level. The mechanism of the excellent photocatalytic activity of Sm‐N‐Bi₂WO₆ is also discussed.     

Band‐Gap Control of Zinc Sulfide: Towards an Efficient Visible‐Light‐Sensitive Photocatalyst

The electronic properties of transition‐metal‐doped zinc sulfide (ZnS) have been investigated by using first‐principles calculations. Transition‐metal doping can allow electronic transitions at energies corresponding to visible‐light wavelengths, thus potentially resulting in increased photocatalytic efficiency under sunlight. In particular, our calculations show that transition‐metal atoms that produce little lattice strain, such as Co, Ni, Mn, and Fe, can be readily incorporated in ZnS. Due to their low formation energies and appropriate band energies, we predict that Ni‐ and Co‐doped ZnS will be promising materials for photocatalytic hydrogen production.     

Production of Hydrogen by Glycerol Photoreforming Using Binary Nitrogen–Metal‐Promoted N‐M‐TiO2 Photocatalysts

The need for renewable energy focuses attention on hydrogen obtained by using sustainable and green methods. The sustainable compound glycerol can be used for hydrogen production by heterogeneous photocatalysis. A novel approach involves the promotion of the TiO₂ photocatalyst with a binary combination of nitrogen and transition metal. We report the synthesis and spectroscopic characterization of the new N‐M‐TiO₂ photocatalysts (M=none, Cr, Co, Ni, Cu), and the photocatalytic reforming of glycerol to hydrogen under ambient conditions and near‐UV or visible light versus benchmark P25 TiO₂. In units of activity μmol m^?2 h^?1, N‐Ni‐TiO₂ is five‐fold more active than P25, and N‐Cu‐TiO₂ is 44‐fold more active. The photocatalytic activity of N‐M‐TiO₂ increases from Cr to Co and Ni, whereas the photoluminescence decreases; the change in activity is due to the modulation of charge recombination.     

Photocatalytic Degradation of Glyphosate in Water by N‐Doped SnO2/TiO2 Thin‐Film‐Coated Glass Fibers

Photocatalytic degradation of glyphosate contaminated in water was investigated. The N‐doped SnO₂/TiO₂ films were prepared via sol–gel method, and coated on glass fibers by dipping method. The effects of nitrogen doping on coating morphology, physical properties and glyphosate degradation rates were experimentally determined. Main variable was the concentration of nitrogen doping in range 0–40 mol%. Nitrogen doping results in shifting the absorption wavelengths and narrowing the band gap energy those lead to enhancement of photocatalytic performance. The near optimal 20N/SnO₂/TiO₂ composite thin film exhibited about two‐ and four‐folds of glyphosate degradation rates compared to the undoped SnO₂/TiO₂ and TiO₂ films when photocatalytic treatment were performed under UV and solar irradiations, respectively, due to its narrowest band gap energy (optical absorption wavelength shifting to visible light region) and smallest crystallite size influenced by N‐doping.     

Mussel‐Directed Synthesis of Nitrogen‐Doped Anatase TiO2

Structure‐forming processes leading to biominerals are well worth learning in pursuit of new synthetic techniques. Strategies that attempt to mimic nature in vitro cannot replace an entire complex natural organism, requiring ingenuity beyond chemists′ hands. A “bioprocess‐inspired synthesis” is demonstrated for fabrication of N‐doped TiO₂ materials at ambient temperature by direct implantation of precursor into living mussels. The amorphous precursor transforms into N‐doped anatase TiO₂ with a hierarchical nanostructure. Synthetic TiO₂ exhibits high phase stability and enhanced visible‐light photocatalytic activity as a result of modifications to its band gap during in vivo mineralization. Intracellular proteins were found to be involved in TiO₂ mineralization. Our findings may inspire material production by new synthetic techniques, especially under environmentally benign conditions.     

Homogenous Boron‐doping in Self‐sensitized Carbon Nitride for Enhanced Visible‐light Photocatalytic Activity

We report a solvothermal approach for the preparation of homogeneously B‐doped self‐sensitized carbon nitride (B‐SSCN) composed of a core of B‐doped carbon nitride microspheres and a covalently linked shell of s‐triazine oligomers. Compared to the undoped structure, the obtained B‐SSCN photocatalyst exhibits an enhanced visible‐light activity, excellent stability for photocatalytic hydrogen generation due to a reduced band‐gap, enhanced charge‐separation efficiency, and better surface reactivity of B‐SSCN. This work provides a new strategy to uniformly insert heteroatoms into the polymeric carbon nitride framework for the development of metal‐free photocatalysts towards efficient production of solar fuels.     

Defect‐Rich Graphene Nanomesh Produced by Thermal Exfoliation of Metal–Organic Frameworks for the Oxygen Reduction Reaction

Although graphene nanomesh is an attractive 2D carbon material, general synthetic routes to produce functional graphene nanomesh in large‐scale are complex and tedious. Herein, we elaborately design a simple two‐step dimensional reduction strategy for exploring nitrogen‐doped graphene nanomesh by thermal exfoliation of crystal‐ and shape‐modified metal‐organic frameworks (MOFs). MOF nanoleaves with 2D rather than 3D crystal structure are used as the precursor, which are further thermally unraveled into nitrogen‐doped graphene nanomesh by using metal chlorides as the exfoliators and etching agent. The nitrogen‐doped graphene nanomesh has a unique ultrathin two‐dimensional morphology, high porosity, rich and accessible nitrogen‐doped active sites, and defective graphene edges, contributing to an unprecedented catalytic activity for the oxygen reduction reaction (ORR) in acid electrolytes. This approach is suitable for scalable production.     

Tuning the Surface Structure of Nitrogen‐Doped TiO2 Nanofibres—An Effective Method to Enhance Photocatalytic Activities of Visible‐Light‐Driven Green Synthesis and Degradation

Nitrogen‐doped TiO₂ nanofibres of anatase and TiO₂(B) phases were synthesised by a reaction between titanate nanofibres of a layered structure and gaseous NH₃ at 400–700 °C, following a different mechanism than that for the direct nitrogen doping from TiO₂. The surface of the N‐doped TiO₂ nanofibres can be tuned by facial calcination in air to remove the surface‐bonded N species, whereas the core remains N doped. N‐Doped TiO₂ nanofibres, only after calcination in air, became effective photocatalysts for the decomposition of sulforhodamine B under visible‐light irradiation. The surface‐oxidised surface layer was proven to be very effective for organic molecule adsorption, and the activation of oxygen molecules, whereas the remaining N‐doped interior of the fibres strongly absorbed visible light, resulting in the generation of electrons and holes. The N‐doped nanofibres were also used as supports of gold nanoparticle (Au NP) photocatalysts for visible‐light‐driven hydroamination of phenylacetylene with aniline. Phenylacetylene was activated on the N‐doped surface of the nanofibres and aniline on the Au NPs. The Au NPs adsorbed on N‐doped TiO₂(B) nanofibres exhibited much better conversion (80 % of phenylacetylene) than when adsorbed on undoped fibres (46 %) at 40 °C and 95 % of the product is the desired imine. The surface N species can prevent the adsorption of O₂ that is unfavourable for the hydroamination reaction, and thus, improve the photocatalytic activity. Removal of the surface N species resulted in a sharp decrease of the photocatalytic activity. These photocatalysts are feasible for practical applications, because they can be easily dispersed into solution and separated from a liquid by filtration, sedimentation or centrifugation due to their fibril morphology.     

Photocatalytic Activity of Fe and Ce Co‐doped Mesoporous TiO2 Catalyst under UV and Visible Light

The catalysts of un‐doped, single‐doped and co‐doped mesoporous titanium dioxide (MTiO₂) were prepared by a template method with tetrabutyltitanate (Ti(OC₄H₉)₄) as a Ti source material and Pluronic P123 as a template. The photo‐absorbance of the obtained catalysts was measured by UV‐vis absorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl orange (MO) (50 mg/L) in an aqueous solution. It was shown that the co‐doped MTiO₂ could be activated by visible light and could thus be used as an effective catalyst in photo‐oxidation reactions. The effect of Fe and Ce co‐dopants on the material properties was investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and N₂ adsorption‐desorption isotherm measurement. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of ca. 10 nm with high surface area of ca. 150 m²/g. The photocatalytic activity of MTiO₂ co‐doped with Fe and Ce was markedly improved due to the synergistic actions of the two dopants.     

Visible Light Photocatalytic Activity of Pt/N‐TiO2 towards Enhanced H2 Production from Water Splitting

Present work mainly focuses on experimental investigation to improvement of hydrogen production by water photoelectrolysis. An experimental facility was designed and constructed for visible light photocatalysis. A series of N‐TiO₂ photocatalysts impregnated with platinum on the surface of N‐TiO₂ were prepared. Hydrogen production upon irradiating aqueous Pt/N‐TiO₂ suspension with visible light was investigated. The shift in excitation wavelength of TiO₂ was 380 nm improved the yield of hydrogen production by N‐TiO₂ and Pt/N‐TiO₂. We used a 400 W mercury arc lamp combined with a 400 nm cutoff filter eliminating all the wavelengths under 400 nm. Pt/N‐TiO₂ material was characterized with TPR, reflective UV/Visible spectroscopy and TEM. The best hydrogen production rate obtained for this setup for N/Ti = 10, 0.05 wt% Pt/N‐TiO₂, through water splitting was about 772 μmolh^?1g^?1.     

Synthesis of C−C Bonded Two‐Dimensional Conjugated Covalent Organic Framework Films by Suzuki Polymerization on a Liquid–Liquid Interface

Synthesis of free‐standing two‐dimensional (2D) conjugated covalent organic framework (COF) films linked by C?C bonds is highly desirable. Now a very simple and mild strategy has been developed to synthesize them by Suzuki polymerization on a water–toluene interface in a refrigerator. The versatility of this strategy was confirmed by the successful synthesis of two different 2D‐COF films: a porous graphene and a porphyrin‐contained 2D‐COF. Both 2D‐COF films have large lateral size and their crystalline domains were visualized by high resolution TEM. Based on the wide compatibility of Suzuki reaction, our breakthrough work opened a door for the synthesis of various 2D conjugated COF films. For application studies, the porous graphene exhibits a good carrier mobility, which is much higher than ?C=N? linked 2D COF films and a good catalytic activity for hydrogen evolution reaction, which is comparable with nitrogen‐ or phosphorus‐doped graphene.     

以ACF为模板制备掺氮TiO2及其光催化脱氨氮研究

本文采用溶胶-凝胶法制备了以活性炭纤维(ACF)为模板的掺氮TiO2光催化剂,利用XRD、XPS、TEM、SEM和UV-Vis等方法对催化剂进行了表征,测定了催化剂在紫外、日光照射下光催化脱氨氮的活性.ACF作模板掺氮TiO2催化剂具有介孔结构,平均粒径约为10 nm,比表面积为64.43 m2/g.紫外、可见光光催化2 h氨氮(85 mg/L)废水的氨氮去除率分别为68%和47%.结果表明,催化剂中氮的含量是影响催化剂光催化活性的重要因素.     

The role of crystal phase in determining photocatalytic activity of nitrogen doped TiO2

Two series of nitrogen doped TiO(2) samples with different ratios of anatase to rutile phases were prepared by milling the mixture of P25 TiO(2) and C(6)H(12)N(4) in air and gaseous NH(3) atmosphere, respectively. Compared to air, NH(3) atmosphere plays an important role in delaying the crystallite transformation from anatase to rutile in the mechanochemical reaction of TiO(2) and C(6)H(12)N(4). In contrast to the previously reported results for pure TiO(2), it is found that nitrogen doped TiO(2) with higher content of rutile phase demonstrates higher photocatalytic activity in photodegrading pollutant Rhodamine B under both UV light and visible light irradiation (lambda>420 nm), and the amount of the surface-adsorbed water and hydroxyl groups on nitrogen doped TiO(2) have little correlations with their crystallite phases (anatase or rutile) and photocatalytic activity. The more abundant surface states characterized by photoluminescence spectroscopy together with the lowered valence band maximum of rutile TiO(2) by nitrogen doping are considered as the key factors for the higher activity of nitrogen doped TiO(2) with higher content of rutile phase.     

Synthesis and Studies of the Visible‐Light Photocatalytic Properties of Near‐Monodisperse Bi‐Doped TiO2 Nanospheres

Near‐monodisperse Bi‐doped anatase TiO₂ nanospheres with almost uniform diameters in the range of 117 to 87 nm were prepared simply by introducing different amounts of bismuth nitrate pentahydrate into the reaction system and subsequent calcinations. X‐ray diffraction, UV‐visible diffuse reflectance spectra, and X‐ray photoelectron spectroscopy confirm that the doped ions substitute some of the lattice titanium atoms, and furthermore, Bi³⁺ and Bi⁴⁺ ions coexist. All the Bi‐doped TiO₂ samples show much better photocatalytic activity than pure TiO₂ in the degradation of rhodamine B (RhB) under the irradiation of visible light (λ>420 nm), and, interestingly, it was found that the degradation mechanism is different from the conventional one, which has already been reported elsewhere. The detailed mechanism is discussed in this article.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1?xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g^?1 h^?1 and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.