Intramolecular Gas‐Phase Reactions of Synthetic Nonheme Oxoiron(IV) Ions: Proximity and Spin‐State Reactivity Rules

The intramolecular gas‐phase reactivity of four oxoiron(IV) complexes supported by tetradentate N₄ ligands ( L ) has been studied by means of tandem mass spectrometry measurements in which the gas‐phase ions [Fe^IV(O)( L )(OTf)]⁺ (OTf=trifluoromethanesulfonate) and [Fe^IV(O)( L )]²⁺ were isolated and then allowed to fragment by collision‐induced decay (CID). CID fragmentation of cations derived from oxoiron(IV) complexes of 1,4,8,11‐tetramethyl‐1,4,8,11‐tetraazacyclotetradecane (tmc) and N,N′‐bis(2‐pyridylmethyl)‐1,5‐diazacyclooctane ( L ⁸Py₂) afforded the same predominant products irrespective of whether they were hexacoordinate or pentacoordinate. These products resulted from the loss of water by dehydrogenation of ethylene or propylene linkers on the tetradentate ligand. In contrast, CID fragmentation of ions derived from oxoiron(IV) complexes of linear tetradentate ligands N,N′‐bis(2‐pyridylmethyl)‐1,2‐diaminoethane (bpmen) and N,N′‐bis(2‐pyridylmethyl)‐1,3‐diaminopropane (bpmpn) showed predominant oxidative N‐dealkylation for the hexacoordinate [Fe^IV(O)( L )(OTf)]⁺ cations and predominant dehydrogenation of the diaminoethane/propane backbone for the pentacoordinate [Fe^IV(O)( L )]²⁺ cations. DFT calculations on [Fe^IV(O)(bpmen)] ions showed that the experimentally observed preference for oxidative N‐dealkylation versus dehydrogenation of the diaminoethane linker for the hexa‐ and pentacoordinate ions, respectively, is dictated by the proximity of the target C? H bond to the oxoiron(IV) moiety and the reactive spin state. Therefore, there must be a difference in ligand topology between the two ions. More importantly, despite the constraints on the geometries of the TS that prohibit the usual upright σ trajectory and prevent optimal σ_CH–σ* overlap, all the reactions still proceed preferentially on the quintet (S=2) state surface, which increases the number of exchange interactions in the d block of iron and leads thereby to exchange enhanced reactivity (EER). As such, EER is responsible for the dominance of the S=2 reactions for both hexa‐ and pentacoordinate complexes.     

A Highly Reactive Oxoiron(IV) Complex Supported by a Bioinspired N3O Macrocyclic Ligand

The sluggish oxidants [Fe^IV(O)(TMC)(CH₃CN)]²⁺ (TMC=1,4,8,11‐tetramethyl‐1,4,8,11‐tetraazacyclotetradecane) and [Fe^IV(O)(TMCN‐d₁₂)(OTf)]⁺ (TMCN‐d₁₂=1,4,7,11‐tetra(methyl‐d₃)‐1,4,7,11‐tetraazacyclotetradecane) are transformed into the highly reactive oxidant [Fe^IV(O)(TMCO)(OTf)]⁺ ( 1 ; TMCO=4,8,12‐trimethyl‐1‐oxa‐4,8,12‐triazacyclotetradecane) upon replacement of an NMe donor in the TMC and TMCN ligands by an O atom. A rate enhancement of five to six orders of magnitude in both H atom and O atom transfer reactions was observed upon oxygen incorporation into the macrocyclic ligand. This finding was explained in terms of the higher electrophilicity of the iron center and the higher availability of the more reactive S=2 state in 1 . This rationalizes nature's preference for using O‐rich ligand environments for the hydroxylation of strong C−H bonds in enzymatic reactions.     

Hydroxylation of Aromatics by H2O2 Catalyzed by Mononuclear Non-heme Iron Complexes: Role of Triazole Hemilability in Substrate-Induced Bifurcation of the H2O2 Activation Mechanism

Rieske dioxygenases are metalloenzymes capable of achieving cis-dihydroxylation of aromatics under mild conditions using O₂ and a source of electrons. The intermediate responsible for this reactivity is proposed to be a cis-Fe^V(O)(OH) moiety. Molecular models allow the generation of a Fe^III(OOH) species with H₂O₂, to yield a Fe^V(O)(OH) species with tetradentate ligands, or {Fe^IV(O); OH^.} pairs with pentadentate ones. We have designed a new pentadentate ligand, mtL₄², bearing a labile triazole, to generate an “in-between” situation. Two iron complexes, [(mtL₄²)FeCl](PF₆) and [(mtL₄²)Fe(OTf)₂]), were obtained and their reactivity towards aromatic substrates was studied in the presence of H₂O₂. Spectroscopic and kinetic studies reflect that triazole is bound at the Fe^II state, but decoordinates in the Fe^III(OOH). The resulting [(mtL₄²)Fe^III(OOH)(MeCN)]²⁺ then lies on a bifurcated decay pathway (end-on homolytic vs. side-on heterolytic) depending on the addition of aromatic substrate: in the absence of substrate, it is proposed to follow a side-on pathway leading to a putative (N₄)Fe^V(O)(OH), while in the presence of aromatics it switches to an end-on homolytic pathway yielding a {(N₅)Fe^IV(O); OH^.} reactive species, through recoordination of triazole. This switch significantly impacts the reaction regioselectivity.     

Iron‐Catalyzed Highly Enantioselective cis‐Dihydroxylation of Trisubstituted Alkenes with Aqueous H2O2

Reliable methods for enantioselective cis‐dihydroxylation of trisubstituted alkenes are scarce. The iron(II) complex cis‐α‐[Fe^II(2‐Me₂‐BQPN)(OTf)₂], which bears a tetradentate N₄ ligand (Me₂‐BQPN=(R,R)‐N,N′‐dimethyl‐N,N′‐bis(2‐methylquinolin‐8‐yl)‐1,2‐diphenylethane‐1,2‐diamine), was prepared and characterized. With this complex as the catalyst, a broad range of trisubstituted electron‐deficient alkenes were efficiently oxidized to chiral cis‐diols in yields of up to 98 % and up to 99.9 % ee when using hydrogen peroxide (H₂O₂) as oxidant under mild conditions. Experimental studies (including ¹⁸O‐labeling, ESI‐MS, NMR, EPR, and UV/Vis analyses) and DFT calculations were performed to gain mechanistic insight, which suggested possible involvement of a chiral cis‐Fe^V(O)₂ reaction intermediate as an active oxidant. This cis‐[Fe^II(chiral N₄ ligand)]²⁺/H₂O₂ method could be a viable green alternative/complement to the existing OsO₄‐based methods for asymmetric alkene dihydroxylation reactions.     

Spin State Tunes Oxygen Atom Transfer towards FeIVO Formation in FeII Complexes

Oxoiron(IV) complexes bearing tetradentate ligands have been extensively studied as models for the active oxidants in non-heme iron-dependent enzymes. These species are commonly generated by oxidation of their ferrous precursors. The mechanisms of these reactions have seldom been investigated. In this work, the reaction kinetics of complexes [Fe^II(CH₃CN)₂L](SbF₆)₂ ( [1](SbF₆)₂ and [2](SbF₆)₂ ) and [Fe^II(CF₃SO₃)₂L] ( [1](OTf)₂ and [2](OTf)₂ ( 1 , L=^Me,HPytacn; 2 , L=^nP,HPytacn; ^R,R′Pytacn=1-[(6-R′-2-pyridyl)methyl]-4,7- di-R-1,4,7-triazacyclononane) with Bu₄NIO₄ to form the corresponding [Fe^IV(O)(CH₃CN)L]²⁺ ( 3 , L=^Me,HPytacn; 4 , L=^nP,HPytacn) species was studied in acetonitrile/acetone at low temperatures. The reactions occur in a single kinetic step with activation parameters independent of the nature of the anion and similar to those obtained for the substitution reaction with Cl⁻ as entering ligand, which indicates that formation of [Fe^IV(O)(CH₃CN)L]²⁺ is kinetically controlled by substitution in the starting complex to form [Fe^II(IO₄)(CH₃CN)L]⁺ intermediates that are converted rapidly to oxo complexes 3 and 4 . The kinetics of the reaction is strongly dependent on the spin state of the starting complex. A detailed analysis of the magnetic susceptibility and kinetic data for the triflate complexes reveals that the experimental values of the activation parameters for both complexes are the result of partial compensation of the contributions from the thermodynamic parameters for the spin-crossover equilibrium and the activation parameters for substitution. The observation of these opposite and compensating effects by modifying the steric hindrance at the ligand illustrates so far unconsidered factors governing the mechanism of oxygen atom transfer leading to high-valent iron oxo species.     

Highly Enantioselective Iron‐Catalyzed cis‐Dihydroxylation of Alkenes with Hydrogen Peroxide Oxidant via an FeIII‐OOH Reactive Intermediate

The development of environmentally benign catalysts for highly enantioselective asymmetric cis‐dihydroxylation (AD) of alkenes with broad substrate scope remains a challenge. By employing [Fe^II(L)(OTf)₂] (L=N,N′‐dimethyl‐N,N′‐bis(2‐methyl‐8‐quinolyl)‐cyclohexane‐1,2‐diamine) as a catalyst, cis‐diols in up to 99.8 % ee with 85 % isolated yield have been achieved in AD of alkenes with H₂O₂ as an oxidant and alkenes in a limiting amount. This “[Fe^II(L)(OTf)₂]+H₂O₂” method is applicable to both (E)‐alkenes and terminal alkenes (24 examples >80 % ee, up to 1 g scale). Mechanistic studies, including ¹⁸O‐labeling, UV/Vis, EPR, ESI‐MS analyses, and DFT calculations lend evidence for the involvement of chiral Fe^III‐OOH active species in enantioselective formation of the two C?O bonds.     

Heterolytic O−O Bond Cleavage Upon Single Electron Transfer to a Nonheme Fe(III)−OOH Complex

The one-electron reduction of the nonheme iron(III)-hydroperoxo complex, [Fe^III(OOH)(L₅²)]²⁺ (L₅²=N-methyl-N,N’,N’-tris(2-pyridylmethyl)ethane-1,2-diamine), carried out at −70 °C results in the release of dioxygen and in the formation of [Fe^II(OH)(L₅²)]⁺ following a bimolecular process. This reaction can be performed either with cobaltocene as chemical reductant, or electrochemically. These experimental observations are consistent with the disproportionation of the hydroperoxo group in the putative Fe^II(OOH) intermediate generated upon reduction of the Fe^III(OOH) starting complex. One plausible mechanistic scenario is that this disproportionation reaction follows an O−O heterolytic cleavage pathway via a Fe^IV-oxo species.     

Iron‐Promoted ortho‐ and/or ipso‐Hydroxylation of Benzoic Acids with H2O2

Regioselective hydroxylation of aromatic acids with hydrogen peroxide proceeds readily in the presence of iron(II) complexes with tetradentate aminopyridine ligands [Fe^II(BPMEN)(CH₃CN)₂](ClO₄)₂ ( 1 ) and [Fe^II(TPA)(CH₃CN)₂](OTf)₂ ( 2 ), where BPMEN=N,N′‐dimethyl‐N,N′‐bis(2‐pyridylmethyl)‐1,2‐ethylenediamine, TPA=tris‐(2‐pyridylmethyl)amine. Two cis‐sites, which are occupied by labile acetonitrile molecules in 1 and 2 , are available for coordination of H₂O₂ and substituted benzoic acids. The hydroxylation of the aromatic ring occurs exclusively in the vicinity of the anchoring carboxylate functional group: ortho‐hydroxylation affords salicylates, whereas ipso‐hydroxylation with concomitant decarboxylation yields phenolates. The outcome of the substituent‐directed hydroxylation depends on the electronic properties and the position of substituents in the molecules of substrates: 3‐substituted benzoic acids are preferentially ortho‐hydroxylated, whereas 2‐ and, to a lesser extent, 4‐substituted substrates tend to undergo ipso‐hydroxylation/decarboxylation. These two pathways are not mutually exclusive and likely proceed via a common intermediate. Electron‐withdrawing substituents on the aromatic ring of the carboxylic acids disfavor hydroxylation, indicating an electrophilic nature for the active oxidant. Complexes 1 and 2 exhibit similar reactivity patterns, but 1 generates a more powerful oxidant than 2 . Spectroscopic and labeling studies exclude acylperoxoiron(III) and Fe^IV?O species as potential reaction intermediates, but strongly indicate the involvement of an Fe^III? OOH intermediate that undergoes intramolecular acid‐promoted heterolytic O? O bond cleavage, producing a transient iron(V) oxidant.     

Mechanistic Insight into Peroxo‐Shunt Formation of Biomimetic Models for Compound II,Their Reactivity toward Organic Substrates,and the Influence of N‐Methylimidazole Axial Ligation

High‐valent iron‐oxo species have been invoked as reactive intermediates in catalytic cycles of heme and nonheme enzymes. The studies presented herein are devoted to the formation of compound II model complexes, with the application of a water soluble (TMPS)Fe^III(OH) porphyrin ([meso‐tetrakis(2,4,6‐trimethyl‐3‐sulfonatophenyl)porphinato]iron(III) hydroxide) and hydrogen peroxide as oxidant, and their reactivity toward selected organic substrates. The kinetics of the reaction of H₂O₂ with (TMPS)Fe^III(OH) was studied as a function of temperature and pressure. The negative values of the activation entropy and activation volume for the formation of (TMPS)Fe^IV?O(OH) point to the overall associative nature of the process. A pH‐dependence study on the formation of (TMPS)Fe^IV?O(OH) revealed a very high reactivity of OOH^? toward (TMPS)Fe^III(OH) in comparison to H₂O₂. The influence of N‐methylimidazole (N‐MeIm) ligation on both the formation of iron(IV)‐oxo species and their oxidising properties in the reactions with 4‐methoxybenzyl alcohol or 4‐methoxybenzaldehyde, was investigated in detail. Combined experimental and theoretical studies revealed that among the studied complexes, (TMPS)Fe^III(H₂O)(N‐MeIm) is highly reactive toward H₂O₂ to form the iron(IV)‐oxo species, (TMPS)Fe^IV?O(N‐MeIm). The latter species can also be formed in the reaction of (TMPS)Fe^III(N‐MeIm)₂ with H₂O₂ or in the direct reaction of (TMPS)Fe^IV?O(OH) with N‐MeIm. Interestingly, the kinetic studies involving substrate oxidation by (TMPS)Fe^IV?O(OH) and (TMPS)Fe^IV?O(N‐MeIm) do not display a pronounced effect of the N‐MeIm axial ligand on the reactivity of the compound II mimic in comparison to the OH^? substituted analogue. Similarly, DFT computations revealed that the presence of an axial ligand (OH^? or N‐MeIm) in the trans position to the oxo group in the iron(IV)‐oxo species does not significantly affect the activation barriers calculated for C?H dehydrogenation of the selected organic substrates.     

Characterization of the FeV=O Complex in the Pathway of Water Oxidation

Hypervalent Fe^V=O species are implicated in a multitude of oxidative reactions of organic substrates, as well as in catalytic water oxidation, a reaction crucial for artificial photosynthesis. Spectroscopically characterized Fe^V species are exceedingly rare and, so far, were produced by the oxidation of Fe complexes with peroxy acids or H₂O₂: reactions that entail breaking of the O?O bond to form a Fe^V=O fragment. The key Fe^V=O species proposed to initiate the O?O bond formation in water oxidation reactions remained undetected, presumably due to their high reactivity. Here, we achieved freeze quench trapping of six coordinated [Fe^V=O,(OH)(Pytacn)]²⁺ (Pytacn=1‐(2′‐pyridylmethyl)‐4,7‐dimethyl‐1,4,7‐triazacyclononane) ( 2 ) generated during catalytic water oxidation. X‐ray absorption spectroscopy (XAS) confirmed the Fe^V oxidation state and the presence of a Fe^V=O bond at ≈1.60 Å. Combined EPR and DFT methods indicate that 2 contains a S=3/2 Fe^V center. 2 is the first spectroscopically characterized high spin oxo‐Fe^V complex and constitutes a paradigmatic example of the Fe^V=O(OH) species proposed to be responsible for catalytic water oxidation reactions.     

Synthesis of an Iron(IV) Aqua–Oxido Complex Using Ozone as an Oxidant

The iron(IV) oxido complex [(tmc)Fe=O(OTf)]OTf with the macrocyclic ligand 1,4,8,11‐tetramethyl‐1,4,8,11‐tetraazacyclo‐tetradecane (tmc) has been synthesized using ozone as an oxidant. By adding water to this compound the complex [(H₂O)(tmc)Fe=O)](OTf)₂ could be prepared. This complex is important in regard to a better understanding of the reactivity of Fe^IV oxido complexes. Mössbauer measurements using the solid compound showed an isomer shift of δ=0.19 mm s^?1 and a quadrupole splitting ΔE_Q=1.38 mm s^?1, confirming the high‐valent Fe^IV state. DFT calculations were performed and led to an assignment of triplet spin multiplicity. Crystallographic characterization of [(H₂O)(tmc)Fe=O)](OTf)₂ as well as of starting materials [(tmc)Fe(CH₃CN)](OTf)₂ and [(tmc)Fe(OTf)]OTf together with previous results strongly suggest that [(H₂O)(tmc)Fe=O)](OTf)₂ was formed similar to the oxido–hydroxido tautomerism analogous to heme systems.     

Iron-Catalyzed Highly Enantioselective cis-Dihydroxylation of Trisubstituted Alkenes with Aqueous H2O2

Reliable methods for enantioselective cis-dihydroxylation of trisubstituted alkenes are scarce. The iron(II) complex cis-α-[Fe^II(2-Me₂-BQPN)(OTf)₂], which bears a tetradentate N₄ ligand (Me₂-BQPN=(R,R)-N,N′-dimethyl-N,N′-bis(2-methylquinolin-8-yl)-1,2-diphenylethane-1,2-diamine), was prepared and characterized. With this complex as the catalyst, a broad range of trisubstituted electron-deficient alkenes were efficiently oxidized to chiral cis-diols in yields of up to 98 % and up to 99.9 % ee when using hydrogen peroxide (H₂O₂) as oxidant under mild conditions. Experimental studies (including ¹⁸O-labeling, ESI-MS, NMR, EPR, and UV/Vis analyses) and DFT calculations were performed to gain mechanistic insight, which suggested possible involvement of a chiral cis-Fe^V(O)₂ reaction intermediate as an active oxidant. This cis-[Fe^II(chiral N₄ ligand)]²⁺/H₂O₂ method could be a viable green alternative/complement to the existing OsO₄-based methods for asymmetric alkene dihydroxylation reactions.     

Beneficial Effect of Acetic Acid on the Formation of FeIII(OOH) Species and on the Catalytic Activity of Bioinspired Nonheme FeII Complexes.

Three new amine/pyridine Fe^II complexes bearing pentadentate ligand with one, two or three electron enriched 4-methoxy-3,5-dimethylpyridine were used as catalysts for the oxidation of small organic molecules by hydrogen peroxide. The distribution of products formed suggests that these ligands are not enough electron donating to promote the O−O heterolytic cleavage of the oxidant in order to generate selective Fe^V(O) species. Using acetic acid in the reaction mixtures results in a significant increase of the efficiency of these catalytic systems. Our investigations show that the use of AcOH leads to the protonation/dissociation of a pyridyl moiety and the formation of (N₄)Fe^II(OAc)(OH) species. These complexes readily react with excess hydrogen peroxide to yield (N₄)Fe^III(OAc)(OOH) intermediates. These latter intermediates are proposed to evolve into (N₄)Fe^IV(OAc)(O), which are more efficient than the usual (N₄)Fe^IV(O) and (N₅)Fe^IV(O).     

Highly Selective and Catalytic Oxygenations of C−H and C=C Bonds by a Mononuclear Nonheme High‐Spin Iron(III)‐Alkylperoxo Species

The reactivity of a mononuclear high‐spin iron(III)‐alkylperoxo intermediate [Fe^III(t‐BuL^Urea)(OOCm)(OH₂)]²⁺( 2 ), generated from [Fe^II(t‐BuL^Urea)(H₂O)(OTf)](OTf) ( 1 ) [t‐BuL^Urea=1,1′‐(((pyridin‐2‐ylmethyl)azanediyl)bis(ethane‐2,1‐diyl))bis(3‐(tert‐butyl)urea), OTf=trifluoromethanesulfonate] with cumyl hydroperoxide (CmOOH), toward the C?H and C=C bonds of hydrocarbons is reported. 2 oxygenates the strong C?H bonds of aliphatic substrates with high chemo‐ and stereoselectivity in the presence of 2,6‐lutidine. While 2 itself is a sluggish oxidant, 2,6‐lutidine assists the heterolytic O?O bond cleavage of the metal‐bound alkylperoxo, giving rise to a reactive metal‐based oxidant. The roles of the urea groups on the supporting ligand, and of the base, in directing the selective and catalytic oxygenation of hydrocarbon substrates by 2 are discussed.     

The Fe2(NO)2 Diamond Core: A Unique Structural Motif In Non‐Heme Iron–NO Chemistry

Non‐heme high‐spin (hs) {FeNO}⁸ complexes have been proposed as important intermediates towards N₂O formation in flavodiiron NO reductases (FNORs). Many hs‐{FeNO}⁸ complexes disproportionate by forming dinitrosyl iron complexes (DNICs), but the mechanism of this reaction is not understood. While investigating this process, we isolated a new type of non‐heme iron nitrosyl complex that is stabilized by an unexpected spin‐state change. Upon reduction of the hs‐{FeNO}⁷ complex, [Fe(TPA)(NO)(OTf)](OTf) ( 1 ), the N‐O stretching band vanishes, but no sign of DNIC or N₂O formation is observed. Instead, the dimer, [Fe₂(TPA)₂(NO)₂](OTf)₂ ( 2 ) could be isolated and structurally characterized. We propose that 2 is formed from dimerization of the hs‐{FeNO}⁸ intermediate, followed by a spin state change of the iron centers to low‐spin (ls), and speculate that 2 models intermediates in hs‐{FeNO}⁸ complexes that precede the disproportionation reaction.     

Comparison of Nonheme Manganese- and Iron-Containing Flavone Synthase Mimics

Heme and nonheme-type flavone synthase enzymes, FS I and FS II are responsible for the synthesis of flavones, which play an important role in various biological processes, and have a wide range of biomedicinal properties including antitumor, antimalarial, and antioxidant activities. To get more insight into the mechanism of this curious enzyme reaction, nonheme structural and functional models were carried out by the use of mononuclear iron, [Fe^II(CDA-BPA*)]²⁺ (6) [CDA-BPA = N,N,N’,N’-tetrakis-(2-pyridylmethyl)-cyclohexanediamine], [Fe^II(CDA-BQA*)]²⁺ (5) [CDA-BQA = N,N,N’,N’-tetrakis-(2-quinolilmethyl)-cyclohexanediamine], [Fe^II(Bn-TPEN)(CH₃CN)]²⁺ (3) [Bn-TPEN = N-benzyl-N,N’,N’-tris(2-pyridylmethyl)-1,2-diaminoethane], [Fe^IV(O)(Bn-TPEN)]²⁺ (9), and manganese, [Mn^II(N4Py*)(CH₃CN)]²⁺ (2) [N4Py* = N,N-bis(2-pyridylmethyl)-1,2-di(2-pyridyl)ethylamine)], [Mn^II(Bn-TPEN)(CH₃CN)]²⁺ (4) complexes as catalysts, where the possible reactive intermediates, high-valent Fe^IV(O) and Mn^IV(O) are known and well characterised. The results of the catalytic and stoichiometric reactions showed that the ligand framework and the nature of the metal cofactor significantly influenced the reactivity of the catalyst and its intermediate. Comparing the reactions of [Fe^IV(O)(Bn-TPEN)]²⁺ (9) and [Mn^IV(O)(Bn-TPEN)]²⁺ (10) towards flavanone under the same conditions, a 3.5-fold difference in reaction rate was observed in favor of iron, and this value is three orders of magnitude higher than was observed for the previously published [Fe^IV(O)(N2Py2Q*)]²⁺ [N,N-bis(2-quinolylmethyl)-1,2-di(2-pyridyl)ethylamine] species.     

Cation‐Mediated Conversion of the State of Charge in Uranium Arene Inverted‐Sandwich Complexes

Two new arene inverted‐sandwich complexes of uranium supported by siloxide ancillary ligands [K{U(OSi(OtBu)₃)₃}₂(μ‐η⁶:η⁶‐C₇H₈)] ( 3 ) and [K₂{U(OSi(OtBu)₃)₃}₂(μ‐η⁶:η⁶‐C₇H₈)] ( 4 ) were synthesized by the reduction of the parent arene‐bridged complex [{U(OSi(OtBu)₃)₃}₂(μ‐η⁶:η⁶‐C₇H₈)] ( 2 ) with stoichiometric amounts of KC₈ yielding a rare family of inverted‐sandwich complexes in three states of charge. The structural data and computational studies of the electronic structure are in agreement with the presence of high‐valent uranium centers bridged by a reduced tetra‐anionic toluene with the best formulation being U^V–(arene^4?)–U^V, KU^IV–(arene^4?)–U^V, and K₂U^IV–(arene^4?)–U^IV for complexes 2 , 3 , and 4 respectively. The potassium cations in complexes 3 and 4 are coordinated to the siloxide ligands both in the solid state and in solution. The addition of KOTf (OTf=triflate) to the neutral compound 2 promotes its disproportionation to yield complexes 3 and 4 (depending on the stoichiometry) and the U^IV mononuclear complex [U(OSi(OtBu)₃)₃(OTf)(thf)₂] ( 5 ). This unprecedented reactivity demonstrates the key role of potassium for the stability of these complexes.     

Spectroscopic,Electrochemical and Computational Characterisation of Ru Species Involved in Catalytic Water Oxidation: Evidence for a [RuV(O)(Py2Metacn)] Intermediate

A new family of ruthenium complexes based on the N‐pentadentate ligand Py₂^Metacn (N‐methyl‐N′,N′′‐bis(2‐picolyl)‐1,4,7‐triazacyclononane) has been synthesised and its catalytic activity has been studied in the water‐oxidation (WO) reaction. We have used chemical oxidants (ceric ammonium nitrate and NaIO₄) to generate the WO intermediates [Ru^II(OH₂)(Py₂^Metacn)]²⁺, [Ru^III(OH₂)(Py₂^Metacn)]³⁺, [Ru^III(OH)(Py₂^Metacn)]²⁺ and [Ru^IV(O)(Py₂^Metacn)]²⁺, which have been characterised spectroscopically. Their relative redox and pH stability in water has been studied by using UV/Vis and NMR spectroscopies, HRMS and spectroelectrochemistry. [Ru^IV(O)(Py₂^Metacn)]²⁺ has a long half‐life (>48 h) in water. The catalytic cycle of WO has been elucidated by using kinetic, spectroscopic, ¹⁸O‐labelling and theoretical studies, and the conclusion is that the rate‐determining step is a single‐site water nucleophilic attack on a metal‐oxo species. Moreover, [Ru^IV(O)(Py₂^Metacn)]²⁺ is proposed to be the resting state under catalytic conditions. By monitoring Ce^IV consumption, we found that the O₂ evolution rate is redox‐controlled and independent of the initial concentration of Ce^IV. Based on these facts, we propose herein that [Ru^IV(O)(Py₂^Metacn)]²⁺ is oxidised to [Ru^V(O)(Py₂^Metacn)]²⁺ prior to attack by a water molecule to give [Ru^III(OOH)(Py₂^Metacn)]²⁺. Finally, it is shown that the difference in WO reactivity between the homologous iron and ruthenium [M(OH₂)(Py₂^Metacn)]²⁺ (M=Ru, Fe) complexes is due to the difference in the redox stability of the key M^V(O) intermediate. These results contribute to a better understanding of the WO mechanism and the differences between iron and ruthenium complexes in WO reactions.     

Nonheme Iron Mediated Oxidation of Light Alkanes with Oxone: Characterization of Reactive Oxoiron(IV) Ligand Cation Radical Intermediates by Spectroscopic Studies and DFT Calculations

The oxidation of light alkanes that is catalyzed by heme and nonheme iron enzymes is widely proposed to involve highly reactive {Fe^V?O} species or {Fe^IV?O} ligand cation radicals. The identification of these high‐valent iron species and the development of an iron‐catalyzed oxidation of light alkanes under mild conditions are of vital importance. Herein, a combination of tridentate and bidentate ligands was used for the generation of highly reactive nonheme {Fe?O} species. A method that employs [Fe^III(Me₃tacn)(Cl‐acac)Cl]⁺ as a catalyst in the presence of oxone was developed for the oxidation of hydrocarbons, including cyclohexane, propane, and ethane (Me₃tacn=1,4,7‐trimethyl‐1,4,7‐triazacyclononane; Cl‐acac=3‐chloro‐acetylacetonate). The complex [Fe^III(Tp)₂]⁺ and oxone enabled stoichiometric oxidation of propane and ethane. ESI‐MS, EPR and UV/Vis spectroscopy, ¹⁸O labeling experiments, and DFT studies point to [Fe^IV(Me₃tacn)({Cl‐acac}^.+)(O)]²⁺ as the catalytically active species.     

Mechanistic Insight into the Nitric Oxide Dioxygenation Reaction of Nonheme Iron(III)–Superoxo and Manganese(IV)–Peroxo Complexes

Reactions of nonheme Fe^III–superoxo and Mn^IV–peroxo complexes bearing a common tetraamido macrocyclic ligand (TAML), namely [(TAML)Fe^III(O₂)]^2? and [(TAML)Mn^IV(O₂)]^2?, with nitric oxide (NO) afford the Fe^III–NO₃ complex [(TAML)Fe^III(NO₃)]^2? and the Mn^V–oxo complex [(TAML)Mn^V(O)]^? plus NO₂^?, respectively. Mechanistic studies, including density functional theory (DFT) calculations, reveal that M^III–peroxynitrite (M=Fe and Mn) species, generated in the reactions of [(TAML)Fe^III(O₂)]^2? and [(TAML)Mn^IV(O₂)]^2? with NO, are converted into M^IV(O) and ^.NO₂ species through O?O bond homolysis of the peroxynitrite ligand. Then, a rebound of Fe^IV(O) with ^.NO₂ affords [(TAML)Fe^III(NO₃)]^2?, whereas electron transfer from Mn^IV(O) to ^.NO₂ yields [(TAML)Mn^V(O)]^? plus NO₂^?.