CXCR4‐Targeted and MMP‐Responsive Iron Oxide Nanoparticles for Enhanced Magnetic Resonance Imaging

MRI offers high spatial resolution with excellent tissue penetration but it has limited sensitivity and the commonly administered contrast agents lack specificity. In this study, two sets of iron oxide nanoparticles (IONPs) were synthesized that were designed to selectively undergo copper‐free click conjugation upon sensing of matrix metalloproteinase (MMP) enzymes, thereby leading to a self‐assembled superparamagnetic nanocluster network with T₂ signal enhancement properties. For this purpose, IONPs with bioorthogonal azide and alkyne surfaces masked by polyethylene glycol (PEG) layers tethered to CXCR4‐targeted peptide ligands were synthesized and characterized. The IONPs were tested in vitro and T₂ signal enhancements of around 160 % were measured when the IONPs were incubated with cells expressing MMP2/9 and CXCR4. Simultaneous systemic administration of the bioorthogonal IONPs in tumor‐bearing mice demonstrated the signal‐enhancing ability of these ‘smart’ self‐assembling nanomaterials.     

Cleaved Iron Oxide Nanoparticles as T2 Contrast Agents for Magnetic Resonance Imaging

Iron oxide nanoparticles as contrast agents are reported to effectively improve magnetic resonance imaging of tissues and cells. In this work, cleaved iron oxide nanoparticles (CIONPs) were generated from hydrophobic FeO nanoparticles (HIONPs) by coating their surfaces with PEG‐phospholipids, oxidizing them under water, and slowly removing the residual FeO phase in phthalate buffer. The synthesized CIONPs showed good r₂ values of up to 258 s^?1 mM ^?1. Thus, the CIONPs can be employed as vectors for drug delivery due to their unique structure with an empty inner space, which enables their use in a wide range of applications.     

Self‐Assembling Nanomaterials using Magnetic Nanoparticles Modified with Polystyrene Brushes

Magnetic nanomaterials have been studied in order to generate novel nanocomposites that display both the magnetic properties of the nanoparticles and the ability to self‐assemble of the amorphous block copolymer matrix. Towards this goal, iron oxide magnetic nanoparticles have been modified with PS brushes by ATRP in order to improve both the dispersion and the affinity of the nanoparticles with one of the blocks of a polystyrene‐block‐polybutadiene‐block‐polystyrene block copolymer. This method of preparation of nanocomposites opens new strategies for the generation of magnetic nanomaterials. The samples are characterized using DSC and atomic and magnetic force microscopies.

     

Functionalized Ultrasmall Iron Oxide Nanoparticles for T1-Weighted Magnetic Resonance Imaging of Tumor Hypoxia

Hypoxia is a common biological condition in many malignant solid tumors that plays an imperative role in regulating tumor growth and impacting the treatment’s therapeutic effect. Therefore, the hypoxia assessment is of great significance in predicting tumor development and evaluating its prognosis. Among the plenty of existing tumor diagnosis techniques, magnetic resonance imaging (MRI) offers certain distinctive features, such as being free of ionizing radiation and providing images with a high spatial resolution. In this study, we develop a fluorescent traceable and hypoxia-sensitive T₁-weighted MRI probe (Fe₃O₄-Met-Cy5.5) via conjugating notable hypoxia-sensitive metronidazole moiety and Cy5.5 dye with ultrasmall iron oxide (Fe₃O₄) nanoparticles. The results of in vitro and in vivo experiments show that Fe₃O₄-Met-Cy5.5 has excellent performance in relaxivity, biocompatibility, and hypoxia specificity. More importantly, the obvious signal enhancement in hypoxic areas indicates that the probe has great feasibility for sensing tumor hypoxia via T₁-weighted MRI. These promising results may unlock the potential of Fe₃O₄ nanoparticles as T₁-weighted contrast agents for the development of clinical hypoxia probes.     

Hierarchical Self‐Assembly of PDMA‐b‐PS Chains into Granular Nanoparticles: Genesis and Fate

The hierarchical self‐assembly of an amphiphilic block copolymer, poly(N,N‐dimethylacrylamide)‐block‐polystyrene with a very short hydrophilic block (PDMA₁₀‐b‐PS₆₂), in large granular nanoparticles is reported. While these nanoparticles are stable in water, their disaggregation can be induced either mechanically (i.e., by applying a force via the tip of the cantilever of an atomic force microscope (AFM)) or by partial hydrolysis of the acrylamide groups. AFM force spectroscopy images show the rupture of the particle as a combination of collapse and flow, while scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images of partly hydrolyzed nanoparticles provide a clear picture of the granular structure.

     

Kinetics of Core‐Shell Nanoparticle Formation by Two‐Dimensional Nuclear Magnetic Resonance

We have studied the kinetics of polymeric nanoparticle formation for poly(styrene‐block‐4‐vinylpyridine) [P(S‐b‐4‐VPy)], chains in a non‐selective solvent using 1,4‐dibromobutane (DBB) as a cross‐linker by means of different nuclear magnetic resonance (NMR) spectroscopy techniques. The kinetic process was followed using ¹H, ¹³C, and 2‐D Heteronuclear Single Quantum Correlation (HSQC) NMR experiments. The kinetic data obtained from 2‐D HSQC and ¹H NMR experiments were in good agreement between them, proving the reliability of the 2‐D HSQC NMR technique for the in situ study of the kinetics of core‐shell nanoparticle formation. A value of 1.5 × 10⁻⁵ s⁻¹ was determined for the apparent kinetic constant of the P(S‐b‐4‐VPy)‐DBB core‐shell nanoparticle formation process.

     

Folding Up of Gold Nanoparticle Strings into Plasmonic Vesicles for Enhanced Photoacoustic Imaging

The stepwise self‐assembly of hollow plasmonic vesicles with vesicular membranes containing strings of gold nanoparticles (NPs) is reported. The formation of chain vesicles can be controlled by tuning the density of the polymer ligands on the surface of the gold NPs. The strong absorption of the chain vesicles in the near‐infrared (NIR) region leads to a much higher efficiency in photoacoustic (PA) imaging than for non‐chain vesicles. The chain vesicles were further employed for the encapsulation of drugs and the NIR light triggered release of payloads. This work not only offers a new platform for controlling the hierarchical self‐assembly of NPs, but also demonstrates that the physical properties of the materials can be tailored by controlling the spatial arrangement of NPs within assemblies to achieve a better performance in biomedical applications.     

A Self‐Assembly Approach to Temperature‐Responsive Polymer Nanocontainers

Summary: Thermosensitive polymer nanocontainers were formed by self‐assembly of diblock copolymers poly(2‐cinnamoylethyl methacrylate)‐block‐poly(N‐isopropylacrylamide) (PCEMA‐block‐PNIPAM) and subsequent photo‐crosslinking of the PCEMA shells. It was found that the diameter of the nanocontainers ranges from tens of nanometers to thousands of nanometers, depending on the self‐assembly conditions. The phase transition of the nanocontainers takes place at 32 °C; the structural changes are reversible in a heating and cooling cycle.

Schematic illustration of the structural transition behavior of the thermosensitive polymer nanocontainers.     

Nanotexaphyrin: One‐Pot Synthesis of a Manganese Texaphyrin‐Phospholipid Nanoparticle for Magnetic Resonance Imaging

The discovery and synthesis of novel multifunctional organic building blocks for nanoparticles is challenging. Texaphyrin macrocycles are capable and multifunctional chelators. However, they remain elusive as building blocks for nanoparticles because of the difficulty associated with synthesis of texaphyrin constructs capable of self‐assembly. A novel manganese (Mn)‐texaphyrin‐phospholipid building block is described, along with its one‐pot synthesis and self‐assembly into a Mn‐nanotexaphyrin. This nanoparticle possesses strong resilience to manganese dissociation, structural stability, in vivo bio‐safety, and structure‐dependent T₁ and T₂ relaxivities. Magnetic resonance imaging (MRI) contrast enhanced visualization of lymphatic drainage is demonstrated with respect to proximal lymph nodes on the head and neck VX‐2 tumors of a rabbit. Synthesis of 17 additional metallo‐texaphyrin building blocks suggests that this novel one‐pot synthetic procedure for nanotexaphyrins may lead to a wide range of applications in the field of nanomedicines.     

Polyrotaxane‐Mediated Self‐Assembly of Gold Nanospheres into Fully Reversible Supercrystals

The use of a thiol‐functionalized nonionic surfactant to stabilize spherical gold nanoparticles in water induces the spontaneous formation of polyrotaxanes at the nanoparticle surface in the presence of the macrocycle α‐cyclodextrin. Whereas using an excess of surfactant an amorphous gold nanocomposite is obtained, under controlled drying conditions the self‐assembly between the surface supramolecules provides large and homogenous supercrystals with hexagonal close packing of nanoparticles. Once formed, the self‐assembled supercrystals can be fully redispersed in water. The reversibility of the crystallization process may offer an excellent reusable material to prepare gold nanoparticle inks and optical sensors with the potential to be recovered after use.     

Construction and Self‐Assembly of Single‐Chain Polymer Nanoparticles via Coordination Association and Electrostatic Repulsion in Water

Simultaneous coordination‐association and electrostatic‐repulsion interactions play critical roles in the construction and stabilization of enzymatic function metal centers in water media. These interactions are promising for construction and self‐assembly of artificial aqueous polymer single‐chain nanoparticles (SCNPs). Herein, the construction and self‐assembly of dative‐bonded aqueous SCNPs are reported via simultaneous coordination‐association and electrostatic‐repulsion interactions within single chains of histamine‐based hydrophilic block copolymer. The electrostatic‐repulsion interactions are tunable through adjusting the imidazolium/imidazole ratio in response to pH, and in situ Cu(II)‐coordination leads to the intramolecular association and single‐chain collapse in acidic water. SCNPs are stabilized by the electrostatic repulsion of dative‐bonded block and steric shielding of nonionic water‐soluble block, and have a huge specific surface area of function metal centers accessible to substrates in acidic water. Moreover, SCNPs can assemble into micelles, networks, and large particles programmably in response to the solution pH. These unique media‐sensitive phase‐transformation behaviors provide a general, facile, and versatile platform for the fabrication of enzyme‐inspired smart aqueous catalysts.

     

Self‐Assembly of Amphiphilic Block Copolymer‐Tethered Nanoparticles: a New Approach to Nanoscale Design of Functional Materials

Colloidal molecules constructed from polymers and nanoparticles (NPs) have recently emerged as a novel class of building blocks for assembling functional hybrid materials. Particularly, self‐assembly of amphiphilic block copolymer (BCP)‐tethered NPs (BNPs) has shown great promise in the nanoscale design of functional hybrid materials. On the one hand, structurally the BNPs can be considered as molecular equivalents that are capable of self‐assembly at multiple hierarchical levels. On the other hand, the assembly of BNPs shows significant differences from molecular assembly due to their large dimension, complex geometry, and multi‐scale interactions involved in the assembly process. The manipulation of BCPs localized near the surface of the NPs offers an effective tool for engineering the interactions between NPs and hence the complexity of NP assembly. In this Feature Article, recent progresses on the self‐assembly of BNPs into functional materials are summarized. First, major strategies for assembling amphiphilic BNPs are highlighted. Secondly, the application of hybrid nanostructures (e.g., vesicles) assembled from BNPs in the field of biomedical imaging and delivery is discussed. Finally, current challenges and perspectives at this frontier are outlined.

     

Gold‐Decorated Chiral Macroporous Films by the Self‐Assembly of Functionalised Block Copolymers

We describe a new and very versatile method to place chosen chemical functionalities at the edge of the pores of macroporous materials. The method is based on the synthesis and self‐assembly of inorganic block copolymers (BCPs) having chiral rigid segments bearing controllable quantities of randomly distributed functional groups. The synthesis of a series of optically active block copolyphosphazenes (PP) with the general formula [N?P(R‐O₂C₂₀H₁₂)_0.9(FG)_0.2]_n‐b‐[N?PMePh]_m (FG=‐OC₅H₄N ( 6 ), ‐NC₄H₈S ( 7 ), and ‐NC₄H₈O ( 8 )), was accomplished by the sequential living cationic polycondensation of N‐silylphosphoranimines, using the mono‐end‐capped initiator [Ph₃P?N?PCl₃][Cl] ( 3 ). The self‐assembly of the phosphazene BCPs 6 – 8 led to chiral porous films. The functionality present on those polymers affected their self‐assembly behaviour resulting in the formation of pores of different diameters (D_n=111 ( 6 ), 53 ( 7 ) and 77 nm ( 8 )). The specific functionalisation of the pores was proven by decorating the films with gold nanoparticles (AuNPs). Thus, the BCPs 6 and 7 , having pyridine and thiomorpholine groups, respectively, were treated with HAuCl₄, followed by reduction with NaBH₄, yielding a new type of block copolyphosphazenes, which self‐assembled into chiral porous films specifically decorated with AuNPs at the edge of the pores.     

Chaotropic‐Anion‐Induced Supramolecular Self‐Assembly of Ionic Polymeric Micelles

Traditional micelle self‐assembly is driven by the association of hydrophobic segments of amphiphilic molecules forming distinctive core–shell nanostructures in water. Here we report a surprising chaotropic‐anion‐induced micellization of cationic ammonium‐containing block copolymers. The resulting micelle nanoparticle consists of a large number of ion pairs (≈60 000) in each hydrophobic core. Unlike chaotropic anions (e.g. ClO₄^?), kosmotropic anions (e.g. SO₄^2?) were not able to induce micelle formation. A positive cooperativity was observed during micellization, for which only a three‐fold increase in ClO₄^? concentration was necessary for micelle formation, similar to our previously reported ultra‐pH‐responsive behavior. This unique ion‐pair‐containing micelle provides a useful model system to study the complex interplay of noncovalent interactions (e.g. electrostatic, van der Waals, and hydrophobic forces) during micelle self‐assembly.     

Aqueous Self‐Assembly of Purely Hydrophilic Block Copolymers into Giant Vesicles

Self‐assembly of macromolecules is fundamental to life itself, and historically, these systems have been primitively mimicked by the development of amphiphilic systems, driven by the hydrophobic effect. Herein, we demonstrate that self‐assembly of purely hydrophilic systems can be readily achieved with similar ease and success. We have synthesized double hydrophilic block copolymers from polysaccharides and poly(ethylene oxide) or poly(sarcosine) to yield high molar mass diblock copolymers through oxime chemistry. These hydrophilic materials can easily assemble into nanosized (<500 nm) and microsized (>5 μm) polymeric vesicles depending on concentration and diblock composition. Because of the solely hydrophilic nature of these materials, we expect them to be extraordinarily water permeable systems that would be well suited for use as cellular mimics.