Aqueous synthesis and characterization of TGA-capped CdSe quantum dots at freezing temperature

CdSe quantum dots (QDs) have traditionally been synthesized in organic phase and then transferred to aqueous solution by functionalizing their surface with silica, polymers, short-chain thiol ligands, or phospholipid micelles. However, a drastic increase in the hydrodynamic size and biotoxicity of QDs may hinder their biomedical applications. In this paper, the TGA-capped CdSe QDs are directly synthesized in aqueous phase at freezing temperature, and they prove to possess high QY (up to 14%).     

Forming highly fluorescent near-infrared emitting PbS quantum dots in water using glutathione as surface-modifying molecule

We present a new facile procedure for transferring oil-soluble oleic acid-capped NIR-emitting PbS quantum dots (QDs) into water, using hydrophilic thiol ligands as the surface-modifying agents of the primary capping molecules (oleic acid). The influence of exchange of the primary capping molecules with five different types of thiol molecules is investigated. The results show that highly fluorescent water-soluble PbS QDs are obtained using glutathione as a surface-modifying agent (photoluminescence quantum yield (PL QY), >30%); significantly less fluorescent water-soluble QDs were obtained using l-cysteine (PL QY, ~5%); with other three thiol molecules, PbS QDs lose almost completely their fluorescence in aqueous solution. This striking difference among the five thiol molecules may be attributed to the difference in the molecular structure. Next, we explored systematically the conditions of QD water solubilization, storage stability, photostability and cytotoxicity and tested further the resulting water-soluble PbS QDs for the imaging of living animals. The preliminary results from these studies illustrate that our synthesis procedure is very facile and that the as-prepared water-soluble PbS QDs are stable and low-cytotoxic and will be an important potential probe in the imaging of living animals due to free carboxyl and amino groups on the external surface of the QDs.     

基于聚合物多齿配体的高性能CdTe量子点的微波水相合成

针对当前水相合成的量子点(QDs)光性能与稳定性等方面存在的不足,发展了基于聚合物多齿配体的水相制备策略.利用巯基修饰的聚丙烯酸(PAA-SH)作为多齿配体代替常用的巯基丙酸等单齿配体,结合微波辅助加热制备了CdTe量子点,研究了多齿配体对量子点的生长机制与荧光性能的影响.以PAA-SH为配体制备的CdTe量子点荧光性能优异(荧光量子效率(PLQY)可达75%),流体力学直径较小(~10 nm),稳定性也有明显提高.基于聚合物多齿配体的量子点制备技术有助于实现生物医学研究中急需的兼具高亮度、高稳定性、小尺寸等特征的高性能量子点生物探针的制备.     

Synthesis of compact multidentate ligands to prepare stable hydrophilic quantum dot fluorophores

We describe a simple and versatile scheme to prepare an array of heterofunctional multidentate ligands that permit strong and stable interactions with colloidal semiconductor nanocrystals (quantum dots, QDs) and render them soluble in aqueous environments. These ligands were synthesized by reacting various chain length poly(ethylene glycols) with thioctic acid, followed by ring opening of the dithiolane moiety, creating a bidentate thiol motif with enhanced affinity for CdSe-ZnS core-shell QDs. Functionalization with these ligands permits processability of the nanocrystals not only in aqueous but also in many other polar solvents. These ligands provide a straightforward means of preparing QDs that exhibit greater resistance to environmental changes, making them more amenable for use in live cell imaging and other biotechnological applications.     

Investigating the Photostability of Quantum Dots at the Single‐Molecule Level

Quantum dots (QDs) have shown great potential to provide spatial, temporal, and structural information for biological systems. However, blinking, photobleaching, and spectral blueshift are adverse effects on their practical applications in biomedical research. An investigation of the effects of six reducing agents including cysteine (Cys), 1,4‐dithiothreitol (DTT), ethyl gallate (EG), L ‐glutathione (GSH), mercaptoacetic acid (MAA), and thiourea (TU) on the photostability of single QDs was studied. Our experiments demonstrate that both DTT and EG effectively inhibit blinking, photobleaching, and spectral blueshift. GSH molecules block blinking and photobleaching of QDs. The other reagents, Cys, MAA, and TU, only have the ability to counteract blinking. Possible explanations are given on the basis of research evidence. The results suggest possibilities for significant improvements in QDs for biological applications by adjusting the environmental conditions.     

Optical and dynamic properties of water-soluble highly luminescent CdTe quantum dots

CdTe quantum dots (QDs) were synthesized in aqueous solution using thioglycolic acid (HS-CH2COOH, TGA) as a stabilizer. The phenomenon of "on" and "off" luminescence intermittency (blinking) of CdTe QDs in PVA and trehalose was investigated by single-molecule optical microscopy, and we identified that the intermittencies of single QDs were correlated with the interaction of water molecules absorbed on the QD surface. The "off" times, the interval between adjacent "on" states, remained essentially unaffected with an increase in excitation intensity. Every QD showed a similar power law behavior for the "off" time distribution regardless of the excitation intensity and aqueous environment of the QDs. In the case of "on" time distribution, power law behavior with an exponential cutoff tail is observed at longer time scales. The time traces indicated that the "on" time was inversely proportional to the excitation intensity; the duration of "on" time became shorter with increasing excitation intensity. An increase in the duration of "on" time was observed in trehalose with respect to that in PVA. We obtained a clear decrease in the power law exponent when PVA was replaced with trehalose. These observations indicate that the luminescence blinking statistics of water-soluble single CdTe QDs is significantly dependent on the aqueous environment, which is interpreted in terms of passivation of the surface trap states of QDs.     

硫脲修饰法制备高发光性能CdTe量子点

通过巯基水解制备了具有优异荧光特性的碲化镉量子点. 详细研究前驱体镉离子与巯基丙酸(MPA)摩尔比、镉离子浓度等制备条件对大尺寸、高量子产率的亲水性碲化镉量子点光学性能的影响. 在不同的水热生长时间下, 可制备出荧光发射峰位于485-660 nm范围内的不同尺寸的碲化镉水溶性量子点, 荧光发射峰半高宽控制在40-75 nm之间, 量子点的最高量子产率(QY)达到了45%. 并利用硫脲缓慢水解和光解释放自由硫离子, 修饰碲化镉表面, 检测修饰后的量子点在12天内光学性能的变化情况. 通过考察硫脲用量对量子点修饰效果, 发现当n(CdTe)/n(thiourea)=1:4(量子点浓度以镉离子浓度计)时, 硫脲对发射峰为505 nm的碲化镉量子点修饰效果最为理想, 量子点荧光强度加强了5倍, 量子产率达到68.3%.     

In situ ligand exchange of thiol-capped CuInS2/ZnS quantum dots at growth stage without affecting luminescent characteristics

An aliphatic thiol ligand of CuInS(2)/ZnS core/shell quantum dots is replaced with a hydroxyl-terminated thiol ligand by utilizing 'on-off state' of ligands during growth stage of the quantum dots. After the ligand-exchange, negligible differences were observed on both photoluminescence spectrum and luminescent quantum efficiency. The reason for the high retention of luminescent efficiency comes from no local agglomeration and no surface deterioration of QDs. It is also observed that 70% of initial ligands are exchanged by the replacing ligand, determined by FT-IR and (1)H NMR. The proposed method provides the quantum dots with an excellent dispersibility in polar solvents, supported by identical luminescence decay characteristics of the QDs.     

Photochemical instability of thiol-capped CdTe quantum dots in aqueous solution and living cells: process and mechanism

The process and mechanism of photochemical instability of thiol-capped CdTe quantum dots (QDs) in aqueous solution were experimentally studied. After laser irradiation, the corresponding Raman bands of the Cd-S bond decreased obviously, indicating bond breaking and thiol detachment from the QD surfaces. Meanwhile, a photoinduced aggregation of QDs occurred with the hydrodynamic diameter increased to hundreds of nanometers from an initial 20 nm, as detected with dynamic light scattering measurements. The bleaching of the photoluminescence of QDs under laser irradiation could be attributed to the enhanced nonradiative transfer in excited QDs caused by increased surface defects due to the losing of thiol ligands. Singlet oxygen (1O2) was involved in the photooxidation of QDs, as revealed by the inhibiting effects of 1O2 quenchers of histidine or sodium azide (NaN3) on the photobleaching of QDs. The linear relationship in Stern-Volmer measurements between the terminal product and the concentration of NaN3 demonstrated that 1O2 was the main pathway of the photobleaching in QD solutions. By comparing the photostability of QDs in C2C12 cells with and without NaN3 treatment, the photooxidation effect of 1O2 on photobleaching of cellular QDs was confirmed.     

Auger Ionization Beats Photo‐Oxidation of Semiconductor Quantum Dots: Extended Stability of Single‐Molecule Photoluminescence

Despite the bright and tuneable photoluminescence (PL) of semiconductor quantum dots (QDs), the PL instability induced by Auger recombination and oxidation poses a major challenge in single‐molecule applications of QDs. The incomplete information about Auger recombination and oxidation is an obstacle in the resolution of this challenge. Here, we report for the first time that Auger‐ionized QDs beat self‐sensitized oxidation and the non‐digitized PL intensity loss. Although high‐intensity photoactivation insistently induces PL blinking, the transient escape of QDs into the ultrafast Auger recombination cycle prevents generation of singlet oxygen (¹O₂) and preserves the PL intensity. By the detection of the NIR phosphorescence of ¹O₂ and evaluation of the photostability of single QDs in aerobic, anaerobic, and ¹O₂ scavenger‐enriched environments, we disclose relations of Auger ionization and ¹O₂‐mediated oxidation to the PL stability of single QDs, which will be useful during the formulation of QD‐based single‐molecule imaging tools and single‐photon devices.     

Near‐Infrared Active Lead Chalcogenide Quantum Dots: Preparation,Post‐Synthesis Ligand Exchange,and Applications in Solar Cells

Quantum dots (QDs) of lead chalcogenides (e.g. PbS, PbSe, and PbTe) are attractive near‐infrared (NIR) active materials that show great potential in a wide range of applications, such as, photovoltaics (PV), optoelectronics, sensors, and bio‐electronics. The surface ligand plays an essential role in the production of QDs, post‐synthesis modification, and their integration to practical applications. Therefore, it is critically important that the influence of surface ligands on the synthesis and properties of QDs is well understood for their applications in various devices. In this Review we elaborate the application of colloidal synthesis techniques for the preparation of lead chalcogenide based QDs. We specifically focus on the influence of surface ligands on the synthesis of QDs and their solution‐phase ligand exchange. Given the importance of lead chalcogenide QDs as potential light harvesters, we also pay particular attention to the current progress of these QDs in photovoltaic applications.     

Preparation of Fluorescent Thiol Group‐Functionalized Silica Microspheres for the Detection and Removal of Silver Ions in Aqueous Solutions

We demonstrate that silica microspheres can act as a sensitive fluorescent sensor and adsorbent of Ag⁺ in aqueous media. These thiol‐functionalized silica microspheres are doped with quantum dots (QDs) using organosilane chemistry in a one‐step preparation. Ligand exchange takes place between the thiolated organosilane and acid‐capped QDs, making the doping easy. Ag⁺ adsorption by the silica microspheres causes the decrease of fluorescence intensity of the QDs. The detection limit for Ag⁺ is found to be 10 μmol/L. The abundance of thiol groups on the surface of the microspheres could effectively remove Ag⁺ through strong interaction. When microspheres with a diameter of 1.1 μm are used as the adsorbents, the adsorption capacity for Ag⁺ reached 102 mg/g. This excellent adsorption ability is due to the abundance of thiol groups that act as the active sites, facilitating the adsorption of the massive metal ions on the surface of the microspheres. Furthermore, the adsorption isotherm data follows the Freundlich model. The structure and content of the silica microspheres were investigated by scanning and high‐resolution transmission electron microscopy, energy dispersive X‐ray spectroscopy, and Raman analysis, and the fluorescence properties were characterized by fluorescence microscopy.     

Probing the mechanism of the interaction between l‐cysteine‐capped‐CdTe quantum dots and Hg2+ using capillary electrophoresis with ensemble techniques

A good understanding of the mechanism of interaction between quantum dots (QDs) and heavy metal ions is essential for the design of more effective sensor systems. In this work, CE was introduced to explore how l ‐cysteine‐capped‐CdTe QDs (l ‐cys‐CdTe QDs) interacts with Hg²⁺. The change in electrophoretic mobility can synchronously reflect the change in the composition and property of QDs. The effects of the free and capping ligands on the system are discussed in detail. ESI‐MS, dynamic light scattering (DLS), zeta potential, and fluorescence (FL) were also applied as cooperative tools to study the interaction mechanism. Furthermore, the interaction mechanism, which principally depended on the concentration of Hg²⁺, was proposed reasonably. At the low concentration of Hg²⁺, the formation of a static complex between Hg²⁺ and the carboxyl and amino groups of l ‐cys‐CdTe QDs surface was responsible for the FL quenching. With the increase of Hg²⁺ concentration, the capping l ‐cys was stripped from the surface of l ‐cys‐CdTe QDs due to the high affinity of Hg²⁺ to the thiol group of l ‐cys. Our study demonstrates that CE can reveal the mechanism of the interaction between QDs and heavy metal ions, such as FL quenching.     

Determination of ζ‐potential,charge, and number of organic ligands on the surface of water soluble quantum dots by capillary electrophoresis

The number of charges and/or organic ligands covalently attached to the surface of CdTe quantum dot nanoparticles has been determined from their electrophoretic mobilities measured in capillaries filled with free electrolyte buffers. Three sizes of water soluble CdTe quantum dots with 3‐mercaptopropionic and thioglycolic acids as surface ligands were prepared. Their electrophoretic mobilities in different pH and ionic strength values of separation buffers were measured by capillary electrophoresis with laser induced fluorescence detection. The ζ‐potentials determined from electrophoretic mobilities using analytical solution of Henry function proposed by Ohshima were in the range from ?30 to ?100 mV. Charges of QDs were calculated from ζ‐potentials. As a result, numbers of organic ligands bonded to QDs surface were determined to be 13, 14, and 15 for the sizes of 3.1, 3.5, and 3.9 nm, respectively. The dissociation constants of organic ligands bonded on QDs surfaces estimated from the dependence of QDs charge on pH of the separation buffer were 7.8 and 7.9 for 3‐mercaptopropionic acid and 6.9 for thioglycolic acid.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.     

Semiconductor quantum dots and metal nanoparticles: syntheses,optical properties,and biological applications

We review the syntheses, optical properties, and biological applications of cadmium selenide (CdSe) and cadmium selenide–zinc sulfide (CdSe–ZnS) quantum dots (QDs) and gold (Au) and silver (Ag) nanoparticles (NPs). Specifically, we selected the syntheses of QDs and Au and Ag NPs in aqueous and organic phases, size- and shape-dependent photoluminescence (PL) of QDs and plasmon of metal NPs, and their bioimaging applications. The PL properties of QDs are discussed with reference to their band gap structure and various electronic transitions, relations of PL and photoactivated PL with surface defects, and blinking of single QDs. Optical properties of Ag and Au NPs are discussed with reference to their size- and shape-dependent surface plasmon bands, electron dynamics and relaxation, and surface-enhanced Raman scattering (SERS). The bioimaging applications are discussed with reference to in vitro and in vivo imaging of live cells, and in vivo imaging of cancers, tumor vasculature, and lymph nodes. Other aspects of the review are in vivo deep tissue imaging, multiphoton excitation, NIR fluorescence and SERS imaging, and toxic effects of NPs and their clearance from the body. Figure Semiconductor quantum dots and metal nanoparticles have extensive applications, e.g., in vitro and in vivo bioimaging Tamitake Itoh and Abdulaziz Anas contributed equally to this article.     

Coverage-mediated suppression of blinking in solid state quantum dot conjugated organic composite nanostructures

Size-correlated single-molecule fluorescence measurements on CdSe quantum dots functionalized with oligo(phenylene vinylene) (OPV) ligands exhibit modified fluorescence intermittency (blinking) statistics that are highly sensitive to the degree of ligand coverage on the quantum dot surface. As evidenced by a distinct surface height signature, fully covered CdSe-OPV nanostructures (approximately 25 ligands) show complete suppression of blinking in the solid state on an integration time scale of 1 s. Some access to dark states is observed on finer time scales (100 ms) with average persistence times significantly shorter than those from ZnS-capped CdSe quantum dots. This effect is interpreted as resulting from charge transport from photoexcited OPV into vacant trap sites on the quantum dot surface. These results suggest exciting new applications of composite quantum dot/organic systems in optoelectronic systems.     

High‐resolution quantification by charge‐dominant electrophoretic mobility shift of quantum dots

Conjugation of biomolecules to colloidal nanoparticles, such as quantum dots (QDs), often leads to change in mobility. We discover that linking DNA molecules to quantum dots alters their surface charge density without significantly increasing the hydrodynamic radius, causing a prominent shift in electrophoretic mobility. In this study, a high‐resolution molecular quantification method named quantification by QDs electrophoretic mobility shift (qQEMS) is developed based on the charge‐dominant transformation that closely associates DNA quantity to QDs electrophoretic mobility. The versatility of qQEMS is demonstrated by a number of quantification assays in which DNA molecules functioned as enzyme substrates, target‐specific probes, and competitive charge carriers. qQEMS shows a great potential as a generic and versatile quantification platform for a wide range of applications.     

Highly efficient size separation of CdTe quantum dots by capillary gel electrophoresis using polymer solution as sieving medium

In this paper, we present a new method for highly efficient size separation of water-soluble CdTe quantum dots (QDs) based on CGE using polymer solution as sieving medium. CdTe QDs were synthesized in aqueous phase by a chemical route with mercaptopropionic acid as a ligand. In the alkaline solution, CdTe QDs possess negative charges and migrate to the anode in the electric field. In linear polyacrylamide sieving medium, the migration time of CdTe QDs was increased with the size of CdTe QDs. The effects of some factors, such as types, concentrations, and pH of sieving media, on the separation of CdTe QDs were investigated systematically. Highly efficient separation of CdTe QDs was obtained in linear polyacrylamide sieving medium, and collection of fractions was automatically accomplished by CGE technique. Our preliminary results show that CGE technique is an efficient tool for characterization and size-dependent separation of water-soluble nanoparticles. In addition, the fraction collection in CGE may be useful in certain special applications such as fabrication of nanodevices in the future.     

Multidentate surface ligand exchange for the immobilization of CdSe/ZnS quantum dots and surface quantum dot-oligonucleotide conjugates

A method for synthesizing multidentate thiol ligands on fused silica surfaces (e.g., optical fibers) was developed for the immobilization of CdSe/ZnS quantum dots (QDs) capped with hydrophilic or hydrophobic ligands. This work was motivated by the poor stability of QDs immobilized via monodentate thiol ligands and the need for stable immobilization strategies in the development of sensor technologies based on QDs. Multi-dentate immobilization was able to withstand washing protocols, and surface ligand exchange occurred via self-assembly through the zinc-metal affinity interaction. Atomic force and scanning electron microscopy images suggested that the QDs were immobilized at high density, approximately 2-4 x 10 (13) cm (-2). It was possible to immobilize one, two, or three colors of QD. Upon immobilization, 1-2 nm bathochromic shifts in the PL spectra were observed. This was attributed to both ligand exchange and the change in local environment. The change in environment was accompanied by a decrease in PL lifetime. Self-assembly of immobilized QD-oligonucleotide and QD-avidin conjugates was also demonstrated. These conjugates were able to hybridize with complementary oligonucleotide and bind biotin, respectively. This versatile immobilization chemistry is an important step in the development of surface-based QD nanosensors. Such technology requires QDs to be immobilized such that they remain accessible to target molecules in solution.