Light Harvesting by a Periodic Mesoporous Organosilica Chromophore

Light aqueduct: Periodic mesoporous organosilica exhibits strong light absorption due to densely packed organic chromophores within the pore walls. Light energy absorbed by 125 biphenyl groups in the pore walls is funneled into a single coumarin 1 molecule in the mesochannels with almost 100 % quantum efficiency, and results in significant enhancement of emission from the coumarin 1 dye.

     

Light‐Harvesting Three‐Chromophore Systems Based on Biphenyl‐Bridged Periodic Mesoporous Organosilica

Three‐chromophore systems with light‐harvesting behavior were prepared, which are based on periodic mesoporous organosilica (PMO) with crystal‐like ordered structure. The organic bridges of biphenyl‐PMO in the pore walls act as donors and two types of dye are incorporated in the one‐dimensional channels. Consecutive two‐step‐Förster resonance energy transfer is observed from the biphenyl moieties to mediators (diethyl‐aminocoumarin or aminoacridone), followed by energy transfer from mediators to acceptors (dibenzothiacarbocyanine, indodicarbocyanine, sulforhodamine G). High energy‐transfer efficiencies ranging from 70 to 80 % are obtained for two‐step‐FRET, indicating that the mesochannel structure with one‐dimensional ordering provides spatial arrangement of chromophore pairs for an efficient direct energy transfer. The emission wavelength can be tuned by a choice of acceptor dye: 477 nm (diethylaminocoumarin), 519 nm (aminoacridone), 567 nm (sulforhodamine G), 630 nm (dibenzothiacarbocyanine), and 692 nm (indodicarbocyanine).     

Mesoporous Au/TiO2 Nanocomposite Microspheres for Visible‐Light Photocatalysis

Mesoporous Au/TiO₂ nanocomposite microspheres have been synthesized by using a microemulsion‐based bottom‐up self‐assembly (EBS) process starting from monodisperse gold and titania nanocrystals as building blocks. The microspheres had large surface areas (above 270 m² g^?1) and open mesopores (about 5 nm), which led to the adsorption‐driven concentration of organic molecules in the vicinity of the microspheres. Au nanoparticles, which were stably confined within the microspheres, enhanced the absorption over the broad UV/Vis/NIR spectroscopic range, owing to their strong surface plasmon resonance (SPR); as a result, the Au nanoparticles promoted the visible‐light photo‐induced degradation of organic compounds.     

Strong Visible‐Light‐Absorbing Cuprous Sensitizers for Dramatically Boosting Photocatalysis

Developing strong visible‐light‐absorbing (SVLA) earth‐abundant photosensitizers (PSs) for significantly improving the utilization of solar energy is highly desirable, yet it remains a great challenge. Herein, we adopt a through‐bond energy transfer (TBET) strategy by bridging boron dipyrromethene (Bodipy) and a Cu^I complex with an electronically conjugated bridge, resulting in the first SVLA Cu^I PSs ( Cu‐2 and Cu‐3 ). Cu‐3 has an extremely high molar extinction coefficient of 162 260 m ^?1 cm^?1 at 518 nm, over 62 times higher than that of traditional Cu^I PS ( Cu‐1 ). The photooxidation activity of Cu‐3 is much greater than that of Cu‐1 and noble‐metal PSs (Ru(bpy)₃²⁺ and Ir(ppy)₃⁺) for both energy‐ and electron‐transfer reactions. Femto‐ and nanosecond transient absorption and theoretical investigations demonstrate that a “ping‐pong” energy‐transfer process in Cu‐3 involving a forward singlet TBET from Bodipy to the Cu^I complex and a backward triplet‐triplet energy transfer greatly contribute to the long‐lived and Bodipy‐localized triplet excited state.     

Near‐Infrared Light‐Driven Hydrogen Evolution from Water Using a Polypyridyl Triruthenium Photosensitizer

In order to realize artificial photosynthetic devices for splitting water to H₂ and O₂ (2 H₂O+hν→2 H₂+O₂), it is desirable to use a wider wavelength range of light that extends to a lower energy region of the solar spectrum. Here we report a triruthenium photosensitizer [Ru₃(dmbpy)₆(μ‐HAT)]⁶⁺ (dmbpy=4,4′‐dimethyl‐2,2′‐bipyridine, HAT=1,4,5,8,9,12‐hexaazatriphenylene), which absorbs near‐infrared light up to 800 nm based on its metal‐to‐ligand charge transfer (¹MLCT) transition. Importantly, [Ru₃(dmbpy)₆(μ‐HAT)]⁶⁺ is found to be the first example of a photosensitizer which can drive H₂ evolution under the illumination of near‐infrared light above 700 nm. The electrochemical and photochemical studies reveal that the reductive quenching within the ion‐pair adducts of [Ru₃(dmbpy)₆(μ‐HAT)]⁶⁺ and ascorbate anions affords a singly reduced form of [Ru₃(dmbpy)₆(μ‐HAT)]⁶⁺, which is used as a reducing equivalent in the subsequent water reduction process.     

CuO Quantum‐Dot‐Sensitized Mesoporous ZnO for Visible‐Light Photocatalysis

How to extend ultraviolet photocatalysts to the visible‐light region is a key challenge for solar‐driven photocatalysis. Herein, we show that ultraviolet ZnO photocatalysts can present high visible‐light photocatalytic activity when combined with CuO quantum dots (QDs; <3 nm). Theoretical analysis demonstrates that the quantum size effect plays a key role in the photoactivity of the CuO/ZnO composite. For CuO QDs smaller than 3 nm, the separated charges could transfer from CuO QDs to the conduction bands of ZnO due to quantum splitting of the CuO energy level and phonon compensation for the difference in the conduction band minimum of CuO and ZnO; however, this process would not occur with the disappearance of the quantum size effect. Further structural analysis demonstrates that interfacial charge separation and transfer between ZnO and CuO dominate the photocatalytic processes instead of a single CuO or ZnO surface. Compared with ZnO? noble metal structures (e.g., ZnO? Ag or ZnO? Au), these ZnO? CuO QD composites present wider absorption bands, higher visible photocatalytic efficiencies, and lower costs.     

Heterogeneous Catalysis for Water Oxidation by an Iridium Complex Immobilized on Bipyridine‐Periodic Mesoporous Organosilica

Heterogenization of metal‐complex catalysts for water oxidation without loss of their catalytic activity is important for the development of devices simulating photosynthesis. In this study, efficient heterogeneous iridium complexes for water oxidation were prepared using bipyridine‐bridged periodic mesoporous organosilica (BPy‐PMO) as a solid chelating ligand. The BPy‐PMO‐based iridium catalysts (Ir‐BPy‐PMO) were prepared by postsynthetic metalation of BPy‐PMO and characterized through physicochemical analyses. The Ir‐BPy‐PMOs showed high catalytic activity for water oxidation. The turnover frequency (TOF) values for Ir‐BPy‐PMOs were one order of magnitude higher than those of conventional heterogeneous iridium catalysts. The reusability and stability of Ir‐BPy‐PMO were also examined, and detailed characterization was conducted using powder X‐ray diffraction, nitrogen adsorption, ¹³C DD MAS NMR spectroscopy, TEM, and XAFS methods.     

Light‐Harvesting Hybrid Assemblies

Light‐harvesting hybrids have gained much importance as they are considered as potential mimics for photosynthetic systems. In this Concept article we introduce the design concepts involved in the building up of light‐harvesting hybrids; these resemble the well‐studied organic‐based assemblies for energy transfer. We have structured this article into three parts based on the strategies adopted in the synthesis of hybrid assemblies, as covalent, semicovalent, and noncovalent procedures. Furthermore, the properties and structural features of the hybrids and analogous organic assemblies are compared. We also emphasize the challenges involved in the processability of these hybrid materials for device applications and present our views and results to address this issue through the design of soft‐hybrids by a solution‐state, noncovalent, self‐assembly process.     

Visible‐Light‐Induced Water Oxidation Mediated by a Mononuclear‐Cobalt(II)‐Substituted Silicotungstate

A mononuclear‐cobalt(II)‐substituted silicotungstate, K₁₀[Co(H₂O)₂(γ‐SiW₁₀O₃₅)₂] ? 23 H₂O (POM‐ 1 ), has been evaluated as a light‐driven water‐oxidation catalyst. With in situ photogenerated [Ru(bpy)₃]³⁺ (bpy=2,2′‐bipyridine) as the oxidant, quite high catalytic turnover number (TON; 313), turnover frequency (TOF; 3.2 s^?1), and quantum yield (Φ_QY; 27 %) for oxygen evolution at pH 9.0 were acquired. Comparison experiments with its structural analogues, namely [Ni(H₂O)₂(γ‐SiW₁₀O₃₅)₂]^10? (POM‐ 2 ) and [Mn(H₂O)₂(γ‐SiW₁₀O₃₅)₂]^10? (POM‐ 3 ), gave the conclusion that the cobalt center in POM‐ 1 is the active site. The hydrolytic stability of the title polyoxometalate (POM) was confirmed by extensive experiments, including UV/Vis spectroscopy, linear sweep voltammetry (LSV), and cathodic adsorption stripping analysis (CASA). As the [Ru(bpy)₃]²⁺/visible light/sodium persulfate system was introduced, a POM–photosensitizer complex formed within minutes before visible‐light irradiation. It was demonstrated that this complex functioned as the active species, which remained intact after the oxygen‐evolution reaction. Multiple experimental parameters were investigated and the catalytic activity was also compared with the well‐studied POM‐based water‐oxidation catalysts (i.e., [Co₄(H₂O)₂(α‐PW₉O₃₄)₂]^10? (Co₄‐POM) and [Co^IIICo^II(H₂O)W₁₁O₃₉]^7? (Co₂‐POM)) under optimum conditions.     

Interim Anatase Coating Layer Stabilizes Rutile@CrxOy Photoanode for Visible‐Light‐Driven Water Oxidation

Ternary core–shell heterostructured rutile@anatase@Cr_xO_y nanorod arrays were elaborately designed as photoanodes for efficient photoelectrochemical water splitting under visible‐light illumination. The four‐fold enhanced and stabilized visible‐light photocurrent highlights the unique role of the interim anatase layer in accelerating the interfacial charge transfer from the Cr_xO_y chromophore to rutile nanorods.     

Ruthenium(II)–Polyimine–Coumarin Light‐Harvesting Molecular Arrays: Design Rationale and Application for Triplet–Triplet‐Annihilation‐Based Upconversion

Ru^II–bis‐pyridine complexes typically absorb below 450 nm in the UV spectrum and their molar extinction coefficients are only moderate (ε<16 000 M ^?1 cm^?1). Thus, Ru^II–polyimine complexes that show intense visible‐light absorptions are of great interest. However, no effective light‐harvesting ruthenium(II)/organic chromophore arrays have been reported. Herein, we report the first visible‐light‐harvesting Ru^II–coumarin arrays, which absorb at 475 nm (ε up to 63 300 M ^?1 cm^?1, 4‐fold higher than typical Ru^II–polyimine complexes). The donor excited state in these arrays is efficiently converted into an acceptor excited state (i.e., efficient energy‐transfer) without losses in the phosphorescence quantum yield of the acceptor. Based on steady‐state and time‐resolved spectroscopy and DFT calculations, we proposed a general rule for the design of Ru^II–polypyridine–chromophore light‐harvesting arrays, which states that the ¹IL energy level of the ligand must be close to the respective energy level of the metal‐to‐ligand charge‐transfer (M LCT) states. Lower energy levels of ¹IL/³IL than the corresponding ¹M LCT/³M LCT states frustrate the cascade energy‐transfer process and, as a result, the harvested light energy cannot be efficiently transferred to the acceptor. We have also demonstrated that the light‐harvesting effect can be used to improve the upconversion quantum yield to 15.2 % (with 9,10‐diphenylanthracene as a triplet‐acceptor/annihilator), compared to the parent complex without the coumarin subunit, which showed an upconversion quantum yield of only 0.95 %.     

Ti-modified Mesoporous Molecular Sieves Containing both Selective Oxidation and Photocatalysis Centers

IntroductionIn recent years,titanium- containing meso-porous molecular sieves have attracted considerableattention of some scholars and scientists because oftheir remarkable catalytic properties in selectiveoxidation reactions by H2 O2 in aqueous solution asthe oxidant[1_ 3 ] .The high cost and low efficiencyof H2 O2 ,however,limits its application on an in-dustrial scale.In our previous work[4] ,we foundthat using Ti- substituted MCM- 41 as a catalystforthe hydroxylation ofbenzene with H2…     

Dephasing and Dissipation in a Source–Drain Model of Light‐Harvesting Systems

The energy transport process in natural‐light‐harvesting systems is investigated by solving the time‐dependent Schrödinger equation for a source–network–drain model incorporating the effects of dephasing and dissipation, owing to coupling with the environment. In this model, the network consists of electronically coupled chromophores, which can host energy excitations (excitons) and are connected to source channels, from which the excitons are generated, thereby simulating exciton creation from sunlight. After passing through the network, excitons are captured by the reaction centers and converted into chemical energy. In addition, excitons can reradiate in green plants as photoluminescent light or be destroyed by nonphotochemical quenching (NPQ). These annihilation processes are described in the model by outgoing channels, which allow the excitons to spread to infinity. Besides the photoluminescent reflection, the NPQ processes are the main outgoing channels accompanied by energy dissipation and dephasing. From the simulation of wave‐packet dynamics in a one‐dimensional chain, it is found that, without dephasing, the motion remains superdiffusive or ballistic, despite the strong energy dissipation. At an increased dephasing rate, the wave‐packet motion is found to switch from superdiffusive to diffusive in nature. When a steady energy flow is injected into a site of a linear chain, exciton dissipation along the chain, owing to photoluminescence and NPQ processes, is examined by using a model with coherent and incoherent outgoing channels. It is found that channel coherence leads to suppression of dissipation and multiexciton super‐radiance. With this method, the effects of NPQ and dephasing on energy transfer in the Fenna–Matthews–Olson complex are investigated. The NPQ process and the photochemical reflection are found to significantly reduce the energy‐transfer efficiency in the complex, whereas the dephasing process slightly enhances the efficiency. The calculated absorption spectrum reproduces the main features of the measured counterpart. As a comparison, the exciton dynamics are also studied in a linear chain of pigments and in a multiple‐ring system of light‐harvesting complexes II (LH2) from purple bacteria by using the Davydov D₁ ansatz. It is found that the exciton transport shows superdiffusion characteristics in both the chain and the LH2 rings.     

G‐Quartet‐Based Nanostructure for Mimicking Light‐Harvesting Antenna

Artificial light‐harvesting systems have received great attention for use in photosynthetic and optoelectronic devices. Herein, a system involving G‐quartet‐based hierarchical nanofibers generated from the self‐assembly of guanosine 5′‐monophosphate (GMP) and a two‐step Förster resonance energy transfer (FRET) is presented that mimics natural light‐harvesting antenna. This solid‐state property offers advantages for future device fabrication. The generation of photocurrent under visible light shows it has potential for use as a nanoscale photoelectric device. The work will be beneficial for the development of light‐harvesting systems by the self‐assembly of supramolecular nanostructures.     

Ruthenium‐Immobilized Periodic Mesoporous Organosilica: Synthesis,Characterization, and Catalytic Application for Selective Oxidation of Alkanes

Periodic mesoporous organosilica (PMO) is a unique material that has a crystal‐like wall structure with coordination sites for metal complexes. A Ru complex, [RuCl₂(CO)₃]₂, is successfully immobilized onto 2,2’‐bipyridine (BPy) units of PMO to form a single‐site catalyst, which has been confirmed by various physicochemical analyses. Using NaClO as an oxidant, the Ru‐immobilized PMO oxidizes the tertiary C?H bonds of adamantane to the corresponding alcohols at 57 times faster than the secondary C?H bonds, thereby exhibiting remarkably high regioselectivity. Moreover, the catalyst converts cis‐decalin to cis‐9‐decalol in a 63 % yield with complete retention of the substrate stereochemistry. The Ru catalyst can be separated by simple filtration and reused without loss of the original activity and selectivity for the oxidation reactions.     

Light‐Driven Water Splitting Mediated by Photogenerated Bromine

Light‐driven water splitting was achieved using a dye‐sensitized mesoporous oxide film and the oxidation of bromide (Br^?) to bromine (Br₂) or tribromide (Br₃^?). The chemical oxidant (Br₂ or Br₃^?) is formed during illumination at the photoanode and used as a sacrificial oxidant to drive a water oxidation catalyst (WOC), here demonstrated using [Ru(bda)(pic)₂], ( 1 ; pic=picoline, bda=2,2′‐bipyridine‐6,6′‐dicarboxylate). The photochemical oxidation of bromide produces a chemical oxidant with a potential of 1.09 V vs. NHE for the Br₂/Br^? couple or 1.05 V vs. NHE for the Br₃^?/Br^? couple, which is sufficient to drive water oxidation at 1 (Ru^V/IV≈1.0 V vs. NHE at pH 5.6). At pH 5.6, using a 0.2 m acetate buffer containing 40 mm LiBr and the [Ru(4,4′‐PO₃H₂‐bpy)(bpy)₂]²⁺ ( RuP ²⁺, bpy=2,2′‐bipyridine) chromophore dye on a SnO₂/TiO₂ core–shell electrode resulted in a photocurrent density of around 1.2 mA cm^?2 under approximately 1 Sun illumination and a Faradaic efficiency upon addition of 1 of 77 % for oxygen evolution.     

A Supramolecular Artificial Light‐Harvesting System with Two‐Step Sequential Energy Transfer for Photochemical Catalysis

An artificial light‐harvesting system with sequential energy‐transfer process was fabricated based on a supramolecular strategy. Self‐assembled from the host–guest complex formed by water‐soluble pillar[5]arene (WP5), a bola‐type tetraphenylethylene‐functionalized dialkyl ammonium derivative (TPEDA), and two fluorescent dyes, Eosin Y (ESY) and Nile Red (NiR), the supramolecular vesicles achieve efficient energy transfer from the AIE guest TPEDA to ESY. ESY can function as a relay to further transfer the energy to the second acceptor NiR and realize a two‐step sequential energy‐transfer process with good efficiency. By tuning the donor/acceptor ratio, bright white light emission can be successfully achieved with a CIE coordinate of (0.33, 0.33). To better mimic natural photosynthesis and make full use of the harvested energy, the WP5?TPEDA‐ESY‐NiR system can be utilized as a nanoreactor: photocatalyzed dehalogenation of α‐bromoacetophenone was realized with 96 % yield in aqueous medium.