Thermally cross-linked superparamagnetic iron oxide nanoparticles: synthesis and application as a dual imaging probe for cancer in vivo

We report the fabrication and characterization of thermally cross-linked superparamagnetic iron oxide nanoparticles (TCL-SPION) and their application to the dual imaging of cancer in vivo. Unlike dextran-coated cross-linked iron oxide nanoparticles, which are prepared by a chemical cross-linking method, TCL-SPION are prepared by a simple, thermal cross-linking method using a Si-OH-containing copolymer. The copolymer, poly(3-(trimethoxysilyl)propyl methacrylate-r-PEG methyl ether methacrylate-r-N-acryloxysuccinimide), was synthesized by radical polymerization and used as a coating material for as-synthesized magnetite (Fe3O4) SPION. The polymer-coated SPION was further heated at 80 degrees C to induce cross-linking between the -Si(OH)3 groups in the polymer chains, which finally generated TCL-SPION bearing a carboxyl group as a surface functional group. The particle size, surface charge, presence of polymer-coating layers, and the extent of thermal cross-linking were characterized and confirmed by various measurements, including dynamic light scattering, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The carboxyl TCL-SPION was converted to amine-modified TCL-SPION and then finally to Cy5.5 dye-conjugated TCL-SPION for use in dual (magnetic resonance/optical) in vivo cancer imaging. When the Cy5.5 TCL-SPION was administered to Lewis lung carcinoma tumor allograft mice by intravenous injection, the tumor was unambiguously detected in T2-weighted magnetic resonance images as a 68% signal drop as well as in optical fluorescence images within 4 h, indicating a high level of accumulation of the nanomagnets within the tumor site. In addition, ex vivo fluorescence images of the harvested tumor and other major organs further confirmed the highest accumulation of the Cy5.5 TCL-SPION within the tumor. It is noteworthy that, despite the fact that TCL-SPION does not bear any targeting ligands on its surface, it was highly effective for tumor detection in vivo by dual imaging.     

Influence of polymeric coating on capillary electrophoresis of iron oxide nanoparticles

In this work, electrophoresis was successfully used to separate three different polymer-coated magnetic iron oxide nanoparticles with similar sizes (nominally 50 nm) using high-pH borate buffer system. The coating polymers were dextran, polyethylene glycol, or carboxymethyl dextran. The results showed that the migration time of carboxymethyl dextran coated nanoparticles is the longest due to relatively more negative surface charges. Investigation of the effects of buffer concentration, pH, electric field strength and the capillary temperature, on electrophoretic properties of samples was also carried out. The results showed that pH, electric field strength and the capillary temperature had indirect relations with both of the migration time and the separation resolution of three different polymer-coated nanoparticles while the buffer concentration had a direct relation.     

Multifunctional Uniform Core–Shell Fe3O4@mSiO2 Mesoporous Nanoparticles for Bimodal Imaging and Photothermal Therapy

Multimodal imaging and simultaneous therapy is highly desirable because it can provide complementary information from each imaging modality for accurate diagnosis and, at the same time, afford an imaging‐guided focused tumor therapy. In this study, indocyanine green (ICG), a near‐infrared (NIR) imaging agent and perfect NIR light absorber for laser‐mediated photothermal therapy, was successfully incorporated into superparamagnetic Fe₃O₄@mSiO₂ core–shell nanoparticles to combine the merit of NIR/magnetic resonance (MR) bimodal imaging properties with NIR photothermal therapy. The resultant nanoparticles were homogenously coated with poly(allylamine hydrochloride) (PAH) to make the surface of the composite nanoparticles positively charged, which would enhance cellular uptake driven by electrostatic interactions between the positive surface of the nanoparticles and the negative surface of the cancer cell. A high biocompatibility of the achieved nanoparticles was demonstrated by using a cell cytotoxicity assay. Moreover, confocal laser scanning microscopy (CLSM) observations indicated excellent NIR fluorescent imaging properties of the ICG‐loaded nanoparticles. The relatively high r₂ value (171.6 mM ^?1 s^?1) of the nanoparticles implies its excellent capability as a contrast agent for MRI. More importantly, the ICG‐loaded nanoparticles showed perfect NIR photothermal therapy properties, thus indicating their potential for simultaneous cancer diagnosis as highly effective NIR/MR bimodal imaging probes and for NIR photothermal therapy of cancerous cells.     

Cellular Uptake of Gold Nanoparticles and Their Movement in 3D Multicellular Tumor Spheroids: Effect of Molecular Weight and Grafting Density of Poly(2‐hydroxyl ethyl acrylate)

It is known that the size of gold nanoparticles (GNPs) is not the only determining factor in the uptake by cells such as cancer cells. The surface functionalization plays a crucial role, in particular the nature of the ligand as well as the molecular weight and the grafting density. Here, poly(2‐hydroxy ethyl) acrylate (pHEA) with molecular weights ranging from 10, 20 to 39 g mol^?1 via reversible addition–fragmentation chain transfer polymerization is synthesized. These polymers are used directly to coat GNPs with sizes of 20, 40, and 70 nm as the trithiocarbonate functionality can strongly bind to the gold surface. The library of nine GNP is found to be nontoxic against lung carcinoma cells A549 and has negligible albumin protein absorption as determined by quartz crystal microbalance. Laser scanning confocal microscopy and flow cytometry reveal that GNP coated with medium length pHEA displays the highest cellular uptake while the effect of the size is not statistically significant. In contrast, multicellular tumor spheroids, which is a 3D model that simulates the tissue, enable the penetration of GNP coated with the longest pHEA chain while it also appears that smaller GNPs have now a clear advantage.     

Optimal design and characterization of superparamagnetic iron oxide nanoparticles coated with polyvinyl alcohol for targeted delivery and imaging

Superparamagnetic iron oxide nanoparticles (SPION) with narrow size distribution and stabilized by polyvinyl alcohol (PVA) were synthesized. The particles were prepared by a coprecipitation technique using ferric and ferrous salts with a molar Fe3+/Fe2+ ratio of 2. Using a design of experiments (DOE) approach, the effect of different synthesis parameters (stirring rate and base molarity) on the structure, morphology, saturation magnetization, purity, size, and size distribution of the synthesized magnetite nanoparticles was studied by various analysis techniques including X-ray powder diffraction (XRD), thermogravimetric analysis (TGA) with differential scanning calorimetry (DSC) measurements, vibrating-sample magnetometer (VSM), transmission electron microscopy (TEM), UV-visible, and Fourier transform infrared (FT-IR) spectrometer. PVA not only stabilized the colloid but also played a role in preventing further growth of SPION followed by the formation of large agglomerates by chemisorption on the surface of particles. A rich behavior in particle size, particle formation, and super paramagnetic properties is observed as a function of molarity and stirring conditions. The particle size and the magnetic properties as well as particle shape and aggregation (individual nanoparticles, magnetic beads, and magnetite colloidal nanocrystal clusters (CNCs) are found to be influenced by changes in the stirring rate and the base molarity. The formation of magnetic beads results in a decrease in the saturation magnetization, while CNCs lead to an increase in saturation magnetization. On the basis of the DOE methodology and the resulting 3-D response surfaces for particle size and magnetic properties, it is shown that optimum regions for stirring rate and molarity can be obtained to achieve coated SPION with desirable size, purity, magnetization, and shape.     

Flash nanoprecipitation with Gd(III)‐based metallosurfactants to fabricate polylactic acid nanoparticles as highly efficient contrast agents for magnetic resonance imaging

Polylactic acid (PLA) nanoparticles coated with Gd(III)‐based metallosurfactants (MS) are prepared using a simple and rapid one‐step method, flash nanoprecipitation (FNP), for magnetic resonance imaging (MRI) applications. By co‐assembling the Gd(III)‐based MS and an amphiphilic polymer, methoxy poly(ethylene glycol)‐b‐poly(?‐caprolactone) (mPEG‐b‐PCL), PLA cores were rapidly encapsulated to form biocompatible T₁ contrast agents with tunable particle size and narrow size distribution. The hydrophobic property of Gd(III)‐based MS were finely tuned to achieve their high loading efficiency. The size of the nanoparticles was easily controlled by tuning the stream velocity, Reynolds number and the amount of the amphiphilic block copolymer during the FNP process. Under the optimized condition, the relaxivity of the nanoparticles was achieved up to 35.39 mM^?1 s^?1 (at 1.5 T), which is over 8 times of clinically used MRI contrast agents, demonstrating the potential application for MR imaging.     

Kappa carrageenan-g-poly (acrylic acid)/SPION nanocomposite as a novel stimuli-sensitive drug delivery system

In this article, a novel triple-stimuli hydrogel was prepared by simultaneous formation of super paramagnetic iron oxide nanoparticles (SPION) and crosslinking of poly (acrylic acid) grafted onto kappa carrageenan (κC-g-PAA). The structure, thermal stability, surface morphology, and magnetic property of the κC-g-PAA/SPION hydrogel were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy with energy dispersive X-ray analysis (SEM–EDAX), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM). Moreover, swelling capacity of the obtained hydrogel was measured at different temperature, pH, and magnetic-field to assess the sensitivity of κC-g-PAA/SPION hydrogel. This synthetic hydrogel was also examined as a controlled drug delivery system and defrasirox release was investigated at different temperature, pH, and magnetic-field. The in vitro antibacterial activity of κC-g-PAA/SPION hydrogel was studied against Escherichia coli and Staphylococcus aureus bacteria where the results showed no antibacterial activity of this new hydrogel. In vitro biocompatibility experiments were undertaken using human bladder epithelial cell line HTB 5637. These results indicated the synthesized κC-g-PAA/SPION hydrogel are nontoxic that will be useful for biomedical applications.

Synthesis of Small‐Sized,Porous, and Low‐Toxic Magnetite Nanoparticles by Thin POSS Silica Coating

In this communication, we report the synthesis of small‐sized (<10 nm), water‐soluble, magnetic nanoparticles (MNPs) coated with polyhedral oligomeric silsesquioxanes (POSS), which contain either polyethylene glycol (PEG) or octa(tetramethylammonium) (OctaTMA) as functional groups. The POSS‐coated MNPs exhibit superparamagnetic behavior with saturation magnetic moments (51–53 emu g^?1) comparable to silica‐coated MNPs. They also provide good colloidal stability at different pH and salt concentrations, and low cytotoxicity to MCF‐7 human breast epithelial cells. The relaxivity data and magnetic resonance (MR) phantom images demonstrate the potential application of these MNPs in bioimaging.     

动脉粥样硬化造影剂PGMA-EDA-g-PEG-g-DS@IO的合成及性能

利用乙二胺(EDA)对聚甲基丙烯酸缩水甘油酯(PGMA)进行开环反应, 制备了侧链多氨基聚合物PGMA-EDA; 再利用聚乙二醇(PEG-COOH)和硫酸葡聚糖钠盐(DS)分别对PGMA-EDA上氨基进行酰胺化反应和还原胺化反应, 制备含动脉粥样硬化斑块靶向分子DS的双亲性接枝共聚物PGMA-EDA-g-PEG-g-DS. 通过核磁共振(¹H NMR)谱和红外光谱(FTIR)表征了聚合物的结构. 利用凝胶渗透色谱(GPC)表征了聚合物的数均分子量M_n=16255, 多分散性指数PDI=1.54. 采用配体交换法, 利用该聚合物对油胺配体超顺磁性氧化铁纳米粒子进行修饰, 制备了水溶性氧化铁纳米粒子PGMA-EDA-g-PEG-g-DS@IO. 通过透射电镜(TEM)和动态光散射(DLS)表征了纳米粒子的形貌和粒度, 采用热重分析(TGA)和振动样品磁强(VSM)仪表征了纳米粒子的包覆率和磁强度. 采用细胞计数试剂盒(CCK)测定了纳米粒子的细胞毒性, 结果表明, 水溶性纳米粒子的生物相容性较好, 可作为动脉粥样硬化斑块的特异性磁共振检测用造影剂.     

原位生成法制备高分子磁性粒子

高分子和无机磁性粒子间因其特性的差异,较难进行均匀的复合与杂化,而原位生成法可以制得磁性粒子均匀复合的结构,较好地解决这一问题.本文对近年来国内外采用原位生成法制备磁性复合粒子的方法进行了比较和综述.     

Superparamagnetism of magnetite nanoparticles: dependence on surface modification

Superparamagnetic iron oxide nanoparticles (SPION) with an average particle diameter of 6 nm are prepared by controlled chemical coprecipitations. Colloidal suspensions of noninteracting SPION, where the surface has been modified with three different types of biocompatible substances, namely, starch, gold (Au), and methoxypoly(ethylene glycol) (MPEG) have been fabricated via three different techniques. Starch-coated SPION are prepared by coprecipitation in a polymeric matrix, Au-coated SPION are fabricated by the microemulsion method, and MPEG-coated SPION are prepared using the self-assembly approach. The magnetic nanoparticles form a core-shell structure, and the magnetic dipole-dipole interactions are screened by a layer of coating agents. The amounts of coating agents and SPION are indirectly calculated from the thermogravimetric analysis and superconducting quantum interference device measurements by assuming passive oxidation on the surface of the SPION, and the other conditions do not influence the measurements. The dependency of the spectral characteristics of M?ssbauer spectroscopy as a function of an external magnetic field Hext is measured to investigate the effect of dipole-dipole screening of the different coating layers on the SPION. Uncoated SPION show a stable magnetic moment under Hext, and the superparamagnetic (SPM) fraction transforms to a ferrimagnetic state. Starch and Au-coated SPION retain the SPM fraction according to M?ssbauer spectroscopy and magnetization measurements. MPEG-coated SPION show hyperfine magnetic structure without the quadrupole effect with increasing the value of the blocking temperature.     

Creating surfactant nanoparticles for block copolymer composites through surface chemistry

A simple strategy to tailor the surface of nanoparticles for their specific adsorption to and localization at block copolymer interfaces was explored. Gold nanoparticles coated by a mixture of low molecular weight thiol end-functional polystyrene (PS-SH) (Mn = 1.5 and 3.4 kg/mol) and poly(2-vinylpyridine) homopolymers (P2VP-SH) (Mn = 1.5 and 3.0 kg/mol) were incorporated into a lamellar poly(styrene-b-2-vinylpyridine) diblock copolymer (PS-b-P2VP) (Mn = 196 kg/mol). A library of nanoparticles with varying PS and P2VP surface compositions (FPS) and high polymer ligand areal chain densities was synthesized. The location of the nanoparticles in the PS-b-P2VP block copolymer was determined by transmission electron microscopy. Sharp transitions in particle location from the PS domain to the PS/P2VP interface, and subsequently to the P2VP domain, were observed at FPS = 0.9 and 0.1, respectively. This extremely wide window of FPS values where the polymer-coated gold nanoparticles adsorb to the interface suggests a redistribution of PS and P2VP polymers on the Au surface, inducing the formation of amphiphilic nanoparticles at the PS/P2VP interface. In a second and synthetically more challenging approach, gold nanoparticles were covered with a thiol terminated random copolymer of styrene and 2-vinylpyridine synthesized by RAFT polymerization. Two different random copolymers were considered, where the molecular weight was fixed at 3.5 kg/mol and the relative incorporation of styrene and 2-vinylpyridine repeat units varied (FPS = 0.52 and 0.40). The areal chain density of these random copolymers on Au is unfortunately not high enough to preclude any contact between the P2VP block of the block copolymer and the Au surface. Interestingly, gold nanoparticles coated by the random copolymer with FPS = 0.4 were dispersed in the P2VP domain, while those with FPS = 0.52 were located at the interface. A simple calculation for the adsorption energy to the interface of the nanoparticles with different surface arrangements of PS and P2VP ligands supports evidence for the rearrangement of thiol terminated homopolymers. An upper limit estimate of the adsorption energy of nanoparticles uniformly coated with a random arrangement of PS and P2VP ligands where a 10% surface area was occupied by P2VP -mers or chains was approximately 1 kBT, which indicates that such nanoparticles are unlikely to be segregated along the interface, in contrast to the experimental results for nanoparticles with mixed ligand-coated surfaces.     

Maghemite nanoparticles protectively coated with poly(ethylene imine) and poly(ethylene oxide)-block-poly(glutamic acid)

Superparamagnetic iron oxide particles (SPIO) of maghemite were prepared in aqueous solution and subsequently stabilized with polymers in two layer-by-layer deposition steps. The first layer around the maghemite core is formed by poly(ethylene imine) (PEI), and the second one is formed by poly(ethylene oxide)-block-poly(glutamic acid) (PEO-PGA). The hydrodynamic diameter of the particles increases stepwise from D(h) = 25 nm (parent) via 35 nm (PEI) to 46 nm (PEI plus PEO-PGA) due to stabilization. This is accompanied by a switching of their zeta-potentials from moderately positive (+28 mV) to highly positive (+50 mV) and finally slightly negative (-3 mV). By contrast, the polydispersity indexes of the particles remain constant (ca. 0.15). M?ssbauer spectroscopy revealed that the iron oxide, which forms the core of the particles, is only present as Fe(III) in the form of superparamagnetic maghemite nanocrystals. The magnetic domains and the maghemite crystallites were found to be identical with a size of 12.0 +/- 0.5 nm. The coated maghemite nanoparticles were tested to be stable in water and in physiological salt solution for longer than 6 months. In contrast to novel methods for magnetic nanoparticle production, where organic solvents are necessary, the procedure proposed here can dispense with organic solvents. Magnetic resonance imaging (MRI) experiments on living rats indicate that the nanoparticles are useful as an MRI contrast agent.     

Poly(amidoamine) dendrimer‐coated magnetic nanoparticles for the fast purification and selective enrichment of glycopeptides and glycans

Glycosylated proteins modulate various important functions of organisms. To reveal the functions of glycoproteins, in‐depth characterization studies are necessary. Although mass spectrometry is a very efficient tool for glycoproteomic and glycomic studies, efficient sample preparation methods are required prior to analyses. In the study, poly(amidoamine) dendrimer‐coated magnetic nanoparticles were presented for the specific enrichment and fast purification of glycopeptides and glycans. The enrichment and purification performance of the developed method was evaluated both at the glycopeptide, and the glycan level using several standard glycoprotein digests and released glycan samples. The poly(amidoamine) dendrimer‐coated magnetic nanoparticles not only showed selective affinity (Immunoglobulin G/Bovine Serum Albumin, 1/10 by weight) to glycopeptides and released glycans but also good sensitivity (0.4 ng/µL for Immunoglobulin G) for glycoproteomic and glycomic applications. Thirty‐five glycopeptides of Immunoglobulin G were detected after enrichment with poly(amidoamine) dendrimer‐coated magnetic nanoparticles. In addition, 55 ¹⁸O tagged deamidated glycopeptides belonging to human plasma glycoproteome were confirmed. Finally, fifty 2‐aminobenzoic acid, and 30 procainamide‐labelled human plasma N‐glycans released from human plasma glycoproteins were determined after purifications. The results indicate that the proposed enrichment and purification method using poly(amidoamine) dendrimer‐coated magnetic nanoparticles could be simply adjusted to sample preparation methods.     

N,N'-Carbonyldiimidazole-mediated functionalization of superparamagnetic nanoparticles as vaccine carrier

Particulates with specific sizes and characteristics can induce potent immune responses by promoting antigen uptake of appropriate immuno-stimulatory cell types. Magnetite (Fe(3)O(4)) nanoparticles have shown many potential bioapplications due to their biocompatibility and special characteristics. Here, superparamagnetic Fe(3)O(4) nanoparticles (SPIONs) with high magnetization value (70emug(-1)) were stabilized with trisodium citrate and successfully conjugated with a model antigen (ovalbumin, OVA) via N,N'-carbonyldiimidazole (CDI) mediated reaction, to achieve a maximum conjugation capacity at approximately 13 microgmicrom(-2). It was shown that different mechanisms governed the interactions between the OVA molecules and magnetite nanoparticles at different pH conditions. We evaluated as-synthesized SPION against commercially available magnetite nanoparticles. The cytotoxicity of these nanoparticles was investigated using mammalian cells. The reported CDI-mediated reaction can be considered as a potential approach in conjugating biomolecules onto magnetite or other biodegradable nanoparticles for vaccine delivery.     

Preparation and characterization of biodegradable poly(isobutylcyano acrylate) nanoparticles with the surface modified by the adsorption of proteins

The purpose of this work was to develop and characterize a biodegradable colloidal drug carrier which avoids uptake by the mononuclear phagocyte system. In order to imitate the cell surface, a sialic-acid-rich glycoprotein (human orosomucoid) was adsorbed onto poly(isobutylcyano acrylate) nanoparticles. The adsorption of human serum albumin and asialo-orosomucoid was also tested as a control. The adsorption was found to be dependent on the pH value and reached its maximum at a pH value close to the isoelectric point (pI) of each protein. The increase in the ionic strength due to the addition of NaCl generally resulted in an increase in the amount adsorbed. Considering the amounts of protein adsorbed (maximum of 4.5 mg m⁻²), the adsorption was assumed to be of the monolayer type. The adsorption kinetics performed at the pI of each protein showed that the equilibrium was reached within 1 h for albumin and within 8 h for the two glycoproteins. This significant difference suggested that conformational rearrangements could be much slower for the two glycoproteins than for the non-glycosylated albumin. The protein layer was found to be stable at pH 7 when the adsorption was performed beforehand at the pI, i.e. at an acidic pH. Finally, using hydrophobic interaction chromatography, the surface of the coated nanoparticles was found to be much more hydrophilic than the surface of the unmodified nanoparticles.     

Physical and Chemical Properties of Magnetite and Magnetite-Polymer Nanoparticles and Their Colloidal Dispersions

The properties of polymer-coated magnetite nanoparticles, which have the potential to be used as effective magnetic resonance contrast agents, have been studied. The magnetite particles were synthesized by using continuous synthesis in an aqueous solution. The polymer-coated magnetite nanoparticles were synthesized by seed precipitation polymerization of methacrylic acid and hydroxyethyl methacrylate in the presence of the magnetite nanoparticles. The particle size was measured by laser light scattering. It was shown that the particle size, variance, magnetic properties, and stability of aqueous magnetite colloidal dispersion strictly depend on the nature of the stabilizing agent. The average hydrodynamic radius of the magnetite particles was found to be 5.7 nm in the stable aqueous colloidal dispersion. An inclusion of the magnetite particle into a hydrophilic polymeric shell increases the stability of the dispersion and decreases the influence of the stabilizing agent on the magnetic and structural properties of the magnetite particles as was shown by X-ray diffraction and M?ssbauer and IR spectroscopy, as well as by vibrating sample magnetometry. The variation in the polymeric shell size and the polymer net density can be useful tools for evaluation of the polymer-coated magnetite particles as effective contrast agents. Copyright 1999 Academic Press.     

Target-specific cellular uptake of PLGA nanoparticles coated with poly(L-lysine)-poly(ethylene glycol)-folate conjugate

Poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles with anionic surface charge were surface coated with cationic di-block copolymer, poly(L-lysine)-poly(ethylene glycol)-folate (PLL-PEG-FOL) conjugate, for enhancing their site-specific intracellular delivery against folate receptor overexpressing cancer cells. The PLGA nanoparticles coated with the conjugate were characterized in terms of size, surface charge, and change in surface composition by XPS. By employing the flow cytometry method and confocal image analysis, the extent of cellular uptake was comparatively evaluated under various conditions. PLL-PEG-FOL coated PLGA nanoparticles demonstrated far greater extent of cellular uptake to KB cells, suggesting that they were mainly taken up by folate receptor-mediated endocytosis. The enhanced cellular uptake was also observed even in the presence of serum proteins, possibly due to the densely seeded PEG chains. The PLL-PEG-FOL coated PLGA nanoparticles could be potentially applied for cancer cell targeted delivery of various therapeutic agents.     

Phosphatidylcholine‐Coated Iron Oxide Nanomicelles for In Vivo Prolonged Circulation Time with an Antibiofouling Protein Corona

We report the synthesis of micellar phosphatidylcholine‐coated superparamagnetic iron oxide nanoparticles as a new long circulation contrast agents for magnetic resonance imaging. Oleic acid‐coated Fe₃O₄ nanoparticles were first prepared through thermal degradation and then encapsulated into small clusters with a phosphatidylcholine coating to obtain hydrophilic nanomicelles. A thorough characterization confirmed the chemical nature of the coating and the excellent colloidal stability of these nanomicelles in aqueous media. Magnetization and relaxivity properties proved their suitability as magnetic resonance imaging (MRI) contrast agent and in vitro cell viability data showed low toxicity. Vascular lifetime and elimination kinetics in the liver were assessed by blood relaxometry and by in vivo MRI in rats and compared with “control” particles prepared with a polyethylene glycol derivative. These micellar particles had a lifetime in blood of more than 10 h, much longer than the control nanoparticles (≈2 h), which is remarkable considering that the coating molecule is a small biocompatible zwitterionic phospholipid. The protein corona was characterized after incubation with rat serum at different times by high‐throughput proteomics, showing a higher proportion of bound apolipoproteins and other dysopsonins for the phosphatidylcholine particles. The antibiofouling properties of this corona and its resistance to the adsorption of proteins corroborate the observed enhanced stability and prolonged systemic circulation.     

载药荧光纳米粒子的制备及在乳腺癌MCF-7细胞系的应用及效果评价

利用两亲性聚乙二醇-聚乳酸共聚物（PEG-PDLLA）包覆荧光染料（DPBA）和紫杉醇（PTX）,通过自组装方法制得载药荧光纳米粒子DPBA/PTX@PEG-PDLLA.纳米粒子尺寸均一,具有良好的生物相容性.对纳米粒子的发光性质、载药量和体外药物释放等进行了表征,并考察了纳米粒子对乳腺癌细胞MCF-7的抑制效果,观察了MCF-7细胞对纳米粒子的摄取情况.结果表明,DPBA/PTX@PEG-PDLLA纳米粒子具有较强的红光发射,不仅可以用于MCF-7肿瘤细胞质荧光成像,而且对肿瘤细胞的增殖具有一定的抑制能力.