Monovalent ion adsorption at the muscovite (001)-solution interface: relationships among ion coverage and speciation, interfacial water structure, and substrate relaxation

The interfacial structure between the muscovite (001) surface and aqueous solutions containing monovalent cations (3 × 10(-3) m Li(+), Na(+), H(3)O(+), K(+), Rb(+), or Cs(+), or 3 × 10(-2) m Li(+) or Na(+)) was measured using in situ specular X-ray reflectivity. The element-specific distribution of Rb(+) was also obtained with resonant anomalous X-ray reflectivity. The results demonstrate complex interdependencies among adsorbed cation coverage and speciation, interfacial hydration structure, and muscovite surface relaxation. Electron-density profiles of the solution near the surface varied systematically and distinctly with each adsorbed cation. Observations include a broad profile for H(3)O(+), a more structured profile for Li(+) and Na(+), and increasing electron density near the surface because of the inner-sphere adsorption of K(+), Rb(+), and Cs(+) at 1.91 ± 0.12, 1.97 ± 0.01, and 2.26 ± 0.01 ?, respectively. Estimated inner-sphere coverages increased from ~0.6 to 0.78 ± 0.01 to ~0.9 per unit cell area with decreasing cation hydration strength for K(+), Rb(+), and Cs(+), respectively. Between 7 and 12% of the Rb(+) coverage occurred as an outer-sphere species. Systematic trends in the vertical displacement of the muscovite lattice were observed within ~40 ? of the surface. These include a <0.1 ? shift of the interlayer K(+) toward the interface that decays into the crystal and an expansion of the tetrahedral-octahedral-tetrahedral layers except for the top layer in contact with solution. The distortion of the top tetrahedral sheet depends on the adsorbed cation, ranging from an expansion (by ~0.05 ? vertically) in 3 × 10(-3)m H(3)O(+) to a contraction (by ~0.1 ?) in 3 × 10(-3) m Cs(+). The tetrahedral tilting angle in the top sheet increases by 1 to 4° in 3 × 10(-3) m Li(+) or Na(+), which is similar to that in deionized water where the adsorbed cation coverages are insufficient for full charge compensation.     

Dramatic effect of the metal cation in dealkylation reactions of phosphinic esters promoted by complexes of polyether ligands with metal iodides

Metal ion electrophilic catalysis has been revealed in dealkylation reactions of phosphinic esters 1-4 promoted by complexes of polyether ligands 5-7 with metal iodides MI(n) (M[n+] = Li(+), Na(+), K(+), Rb(+), Ca(2+), Sr(2+), Ba(2+)) in low polarity solvents (chlorobenzene, 1,2-dichlorobenzene, and toluene) at 60 degrees C. The catalytic effect increases with increasing the Lewis acid character of the cation, in the order Rb(+)< K(+)< Na(+)< Li(+) and Ba(2+)< Sr(2+)< Ca(2+). The results are interpreted in terms of a transition state where the complexed cation (M[n+] subset Lig) assists the departure of the leaving group Ph(2)P(O)O(-) and, at the same time, favors the attack at carbon of the nucleophile I(-) ("push-pull" mechanism). The rate sequence found for 1-4 (Me > Et > i-Pr and t-Bu) shows that this reaction can be utilized for the selective dealkylation of these substrates.     

Photodissociation of yttrium and lanthanum oxide cluster cations

Transition metal oxide cations of the form M n O m (+) (M = Y, La) are produced by laser vaporization in a pulsed nozzle source and detected with time-of-flight mass spectrometry. Cluster oxides for each value of n form only a limited number of stoichiometries; MO(M2O3)x(+) species are particularly intense. Cluster cations are mass selected and photodissociated using the third harmonic (355 nm) of a Nd:YAG laser. Multiphoton excitation is required to dissociate these clusters because of their strong bonding. Yttrium and lanthanum oxides exhibit different dissociation channels, but some common trends can be identified. Larger clusters for both metals undergo fission to make certain stable cation clusters, especially MO(M2O3) x (+) species. Specific cations are identified to be especially stable because of their repeated production in the decomposition of larger clusters. These include M3O4(+), M5O7(+), M7O10(+), and M9O13(+), along with Y6O8(+). Density functional theory calculations were performed to investigate the relative stabilities and structures of these systems.     

Interaction of molecular nitrogen and oxygen with extraframework cations in zeolites with double six-membered rings of oxygen-bridged silicon and aluminum atoms: a DFT study

The interaction of N(2) and O(2) with extraframework cations of zeolite frameworks was studied by DFT, using the B3LYP method. The extraframework cation sites located in the vicinity of the double six-member rings (D6R) of FAU zeolites (SI, SI', SIII') were considered and clusters with composition (M(n)(+))(2/)(n)()H(12)Si(10)Al(2)O(18), M = Li(+), Na(+), K(+), Ca(2+), were selected to represent the adsorption centers. The cation sites SII in the center of single six-membered rings (S6R) were modeled by [M(I)H(12)Si(4)Al(2)O(6)](-) and M(II)H(12)Si(4)Al(2)O(6) clusters. The adsorption energy of N(2) and O(2) is the highest for Li(+) cations at the SIII' cation sites, while for the SI' and SII sites the adsorption energies decrease in the order Ca(2+) > Na(+) > Li(+). The calculated small N(2) adsorption energy for Li(+) cations at SII sites suggests that these sites do not take part in the sorption process in agreement with results of NMR studies and Monte Carlo simulations. The N(2) adsorption complexes with the extraframework cations are linear, while those of O(2) are bent regardless of the extraframework cation location. The SIII' cation sites are the most favorable ones with respect to N(2) adsorption capacity and N(2)/O(2) selectivity; the SII sites are less selective and the SI sites are not accessible.     

Uranyl-peroxide nanocapsules: electronic structure and cation complexation in [(UO2)20(μ-O2)30]20-

The pentagonal K(10)[(UO(2))(5)(μ-O(2))(5)(C(2)O(4))(5)] species have been identified as the building blocks of uranyl-peroxide nanocapsules. The computed complexation energies of different alkali cations (Li(+), Na(+), K(+), Rb(+), and Cs(+)) with [(UO(2))(5)(μ-O(2))(5)(O(2))(5)](10-) and [(UO(2))(20)(μ-O(2))(30)](20-) species suggest a strong cation templating effect. In the studied species, the largest complexation energy occurs for the experimentally used alkali cations (Na(+) and K(+)).     

Surfactant behavior of "ellipsoidal" dicarbollide anions: a molecular dynamics study

We report a molecular dynamics study of cobalt bis(dicarbollide) anions [(B(9)C(2)H(8)X(3))(2)Co](-) (XCD(-)) commonly used in liquid-liquid extraction (X = H, Me, Cl, or Br), showing that these anions, although lacking the amphiphilic topology, behave as anionic surfactants. In pure water, they display "hydrophobic attractions", leading to the formation of aggregates of different sizes and shapes depending on the counterions. When simulated at a water/"oil" interface, the different anions (HCD(-), MeCD(-), CCD(-), and BrCD(-)) are found to be surface active. As a result, the simulated M(n+) counterions (M(n+) = Na(+), K(+), Cs(+), H(3)O(+), UO(2)(2+), Eu(3+)) concentrate on the aqueous side of the interface, forming a "double layer" whose characteristics are modulated by the hydrophobic character of the anion and by M(n+). The highly hydrophilic Eu(3+) or UO(2)(2+) cations that are generally "repelled" by aqueous interfaces are attracted by dicarbollides near the interface, which is crucial as far as the mechanism of assisted cation extraction to the oil phase is concerned. These cations interact with interfacial XCD(-) in their fully hydrated Eu(H(2)O)(9)(3+) and UO(2)(H(2)O)(5)(2+) forms, whereas the less hydrophilic monocharged cations display intimate contacts via their X substituents. The results obtained with the TIP3P and OPLS models for the solvents are confirmed with other water models (TIP5P or a polarizable 4P-Pol water) and with more polar "oil" models. The importance of interfacial phenomena is further demonstrated by simulations with a high oil-water ratio, leading to the formation of a micelle covered with CCD's. We suggest that the interfacial activity of dicarbollides and related hydrophobic anions is an important feature of synergism in liquid-liquid extraction of hard cations (e.g., for nuclear waste partitioning).     

Potential-dependent vibrational spectroscopy of solvent molecules at the Pt(111) electrode in a water/acetonitrile mixture studied by sum frequency generation

Sum frequency generation (SFG) vibrational spectra of D(2)O and/or acetonitrile (CH(3)CN) on a Pt(111) single-crystal electrode were obtained as a function of applied potential in a 5 mol % water/acetonitrile mixed solvent with different 0.1 molar MSO(3)CF(3) salts (M = H(+), Li(+), Na(+), K(+), and Cs(+)). The results provide a very specific model for the composition of the inner Helmholtz layer as a function of potential and surface charge. Acetonitrile dominates the inner layer with the CN group directed toward the metal at potentials where the metal has a positive charge. As the surface becomes negatively charged, the acetonitrile orientation flips 180 degrees, with the CH(3) group pointing toward the surface. At even more negative surface charge, D(2)O displaces acetonitrile from the inner layer and is the predominant molecule on the surface. Here water is present as an oriented molecule with the oxygen end pointing toward the metal. The potential (and surface charge) where water is the dominant molecule in the inner Helmholtz layer is determined by the solvation energy of the cation.     

Can we understand the different coordinations and structures of closed‐shell metal cation‐water clusters?

We present a model potential for studying M(q+)(H(2)O)(n=1,9) clusters where M stands for either Na(+), Cs(+), Ca(2+), Ba(2+), or La(3+). The potential energy surfaces (PES) are explored by the Monte Carlo growth method. The results for the most significant equilibrium structures of the PES as well as for energetics are favorably compared to the best ab initio calculations found in the literature and to experimental results. Most of these complexes have a different coordination number in cluster compared to experimental results in solution or solid phase. An interpretation of the coordination number in clusters is given. In order to well describe the transition between the first hydration sphere and the second one we show that an autocoherent treatment of the electric field is necessary to correctly deal with polarization effects. We also explore the influence of the cation properties (charge, size, and polarizability) on both structures and coordination number in clusters, as well as the meaning of the second hydration sphere. Such an approach shows that the leading term in the interaction energy for a molecule in the second hydration sphere is an electrostatic attraction to the cation and not a hydrogen bond with the water molecules in the first hydration sphere.     

Photodissociation spectroscopy of the Mg+-acetic acid complex

We have studied the structure and photodissociation of Mg(+)-acetic acid clusters. Ab initio calculations suggest four relatively strongly bound ground state isomers for the [MgC(2)H(4)O(2)](+) complex. These isomers include the cis and trans forms of the Mg(+)-acetic acid association complex with Mg(+) bonded to the carbonyl O atom of acetic acid, the Mg(+)-acetic acid association complex with Mg(+) bonded to the hydroxyl O atom of acetic acid, or to a Mg(+)-ethenediol association complex. Photodissociation through the Mg(+)-based 3p<--3s absorption bands in the near UV leads to direct (nonreactive) and reactive dissociation products: Mg(+), MgOH(+), Mg(H(2)O)(+), CH(3)CO(+), and MgCH(3) (+). At low energies the dominant reactive quenching pathway is through dehydration to Mg(H(2)O)(+), but additional reaction channels involving C-H and C-C bond activation are also open at higher energies.     

Photodissociation of vanadium, niobium, and tantalum oxide cluster cations

Transition-metal oxide clusters of the form M(n)O(m) (+)(M=V,Nb,Ta) are produced by laser vaporization in a pulsed nozzle cluster source and detected with time-of-flight mass spectrometry. Consistent with earlier work, cluster oxides for each value of n produce only a limited number of stoichiometries, where m>n. The cluster cations are mass selected and photodissociated using the second (532 nm) or third (355 nm) harmonic of a Nd:YAG (yttrium aluminum garnet) laser. All of these clusters require multiphoton conditions for dissociation, consistent with their expected strong bonding. Dissociation occurs by either elimination of oxygen or by fission, repeatedly producing clusters having the same specific stoichiometries. In oxygen elimination, vanadium species tend to lose units of O(2), whereas niobium and tantalum lose O atoms. For each metal increment n, oxygen elimination proceeds until a terminal stoichiometry is reached. Clusters having this stoichiometry do not eliminate more oxygen, but rather undergo fission, producing smaller M(n)O(m) (+) species. The smaller clusters produced as fission products represent the corresponding terminal stoichiometries for those smaller n values. The terminal stoichiometries identified are the same for V, Nb, and Ta oxide cluster cations. This behavior suggests that these clusters have stable bonding networks at their core, but additional excess oxygen at their periphery. These combined results determine that M(2)O(4) (+), M(3)O(7) (+), M(4)O(9) (+), M(5)O(12) (+), M(6)O(14) (+), and M(7)O(17) (+) have the greatest stability for V, Nb, and Ta oxide clusters.     

Band gap variation in Prussian Blue via cation-induced structural distortion

The charge-transfer band gap of the iron cyanide framework material Prussian Blue and its dependence on the type and location of the charge-compensating interstitial cations (K(+), Rb(+), Cs(+)) are investigated via periodic density functional (DF) calculations. The calculated variation in the band gap magnitude with respect to cation type confirms recent experimental results on cation-induced spectral shifts. The role of both the cation interaction with the framework and the cation-induced lattice expansion are examined with respect to their influence on the band gap. The gap magnitude is related to the cation type but is found to be more strongly affected by cation-induced lattice distortion as the cation passes through the material. Our results support the possibility of engineering the electronic structure of Prussian Blue type materials through guest-induced host-framework distortion.     

Theoretical study on the electronic states of NaLi

Configuration interaction calculations have been carried out on electronic states of the NaLi molecule and the cation NaLi(+). Potential energy curves are presented for the lowest nine (1)Sigma(+), seven (1)Pi, four (1)Delta, eight (3)Sigma(+), seven (3)Pi, and four (3)Delta states of NaLi as well as for the lowest ten (2)Sigma(+), six (2)Pi, and two (2)Delta states of NaLi(+). The results of the present many-electron configuration interaction calculations on the cation are in support of previous core-polarization effective potential calculations. The present calculations on the NaLi molecule are complementary to previous theoretical work on this system, including recently observed electronic states that had not been calculated previously as well as an investigation of nonadiabatic effects leading to spectral perturbations. Furthermore, ab initio potential energy curves of the neutral and the ground state of the cation are employed to determine quantum defect that may be employed to generate potential energy curves for nd and (n+1)p (for n>3) Rydberg states of NaLi. The present results on the 3 (1)Pi and 4 (1)Pi states are in good agreement with recent experimental work, whereas on the basis of theoretical data, the recently observed state 5 (1)Pi is better described as 6 (1)Pi.     

Alkali-ion microsolvation with benzene molecules

The target of this investigation is to characterize by a recently developed methodology, the main features of the first solvation shells of alkaline ions in nonpolar environments due to aromatic rings, which is of crucial relevance to understand the selectivity of several biochemical phenomena. We employ an evolutionary algorithm to obtain putative global minima of clusters formed with alkali-ions (M(+)) solvated with n benzene (Bz) molecules, i.e., M(+)-(Bz)(n). The global intermolecular interaction has been decomposed in Bz-Bz and in M(+)-Bz contributions, using a potential model based on different decompositions of the molecular polarizability of benzene. Specifically, we have studied the microsolvation of Na(+), K(+), and Cs(+) with benzene molecules. Microsolvation clusters up to n = 21 benzene molecules are involved in this work and the achieved global minimum structures are reported and discussed in detail. We observe that the number of benzene molecules allocated in the first solvation shell increases with the size of the cation, showing three molecules for Na(+) and four for both K(+) and Cs(+). The structure of this solvation shell keeps approximately unchanged as more benzene molecules are added to the cluster, which is independent of the ion. Particularly stable structures, so-called "magic numbers", arise for various nuclearities of the three alkali-ions. Strong "magic numbers" appear at n = 2, 3, and 4 for Na(+), K(+), and Cs(+), respectively. In addition, another set of weaker "magic numbers" (three per alkali-ion) are reported for larger nuclearities.     

Scavenging effects of metal complexes of water-soluble thiacalix[4]arenetetrasulfonate on superoxide anion radicals

The scavenging effects of metal complexes of thiacalix[4]arenetetrasulfonate (Me-TCAS[4], Me=H?, Fe3(+), Mn3(+), Mn2(+), Cu2(+), and Zn2(+)) on superoxide anion radicals (O??) generated from the xanthine-xanthine oxidase system were investigated by the nitroblue tetrazolium (NBT) method and electron spin resonance (ESR) spin-trapping method using 5,5-dimethyl-1-pyrroline-N-oxide as a trapping reagent. As a reference, calix[4]arenetetrasulfonate (H?)-CAS[4]), calix[6]arenehexasulfonate (H?-CAS[6]) and calix[8]areneoctasulfonate (H?-CAS[8]) were also examined. The results by the NBT method indicated that Fe3(+)- and Mn3(+)-TCAS[4] exhibited the highest O?? scavenging activity among Me-TCAS[4] and H?-CAS[n] (n = 4, 6, 8) in this study. The IC?? values of Fe3(+)- and Mn3(+)-TCAS[4] for O?? scavenging activity were estimated to be 5.3 and 7.8 μM, respectively, and were almost the same as those of tannin acid, catechin and their derivatives, which are known as very effective scavengers of O??. Scavenging activities were in the order of Fe3(+)- and Mn3(+)-TCAS[4]>Mn2(+)-, Cu2(+)-, and Zn(2+)-TCAS[4]>H(2)-TCAS[4] and H?-CAS[n] (n=4, 6, 8). Each activity of Me-TCAS[4] (Me=Fe3(+), Mn3(+), Mn2(+), Cu2(+), and Zn2(+)) was higher than that of the corresponding metal ion, indicating that H?-TCAS[4] has the ability to raise the activity of the metal ion itself by forming a complex. Also, the ESR spin-trapping method revealed that Fe3(+)- and Mn3(+)-TCAS[4] showed high O?? scavenging activities, similarly to the results by the NBT method.     

An atmospheric pressure chemical ionization study of the positive and negative ion chemistry of the hydrofluorocarbons 1,1-difluoroethane (HFC-152a) and 1,1,1,2-tetrafluoroethane (HFC-134a) and of perfluoro-n-hexane (FC-72) in air plasma at atmospheric pressure

A report is given on the ionization/dissociation behavior of the title compounds within air plasmas produced by electrical corona discharges at atmospheric pressure: both positive and negative ions were investigated at different temperatures using atmospheric pressure chemical ionization mass spectrometry (APCI-MS). CHF(2)CH(3) (HFC-152a) undergoes efficient ionic oxidation to C(2)H(5)O(+), in which the oxygen comes from water present in the plasma. In contrast, CF(3)CH(2)F (HFC-134a) does not produce any characteristic positive ion under APCI conditions, its presence within the plasma being revealed only as a neutral ligand in ion-molecule complexes with ions of the background (H(3)O(+) and NO(+)). Analogously, the perfluorocarbon FC-72 (n-C(6)F(14)) does not produce significant positive ions at 30 degrees C: at high temperature, however, it undergoes dissociative ionization to form many product ions including C(3)F(6)(+), C(2)F(4)(+), C(n)F(2n+1)(+) and a few families of oxygen containing cations (C(n)F(2n+1)OH(2)(+), C(n)F(2n)OH(+), C(n)F(2n-1)O(+), C(n)F(2n-1)O(2)H(2)(+), C(n)F(2n-2)O(2)H(+)) which are suggested to derive from C(n)F(2n+1)(+) in a cascade of steps initiated by condensation with water followed by steps of HF elimination and H(2)O addition. Negative ions formed from the fluoroethanes CHF(2)CH(3) and CF(3)CH(2)F (M) include complexes with ions of the background, O(2)(-)(M), O(3)(-)(M) and some higher complexes involving also water, and complexes of the fluoride ion, F(-)(H(2)O), F(-)(M) and higher complexes with both M and H(2)O also together. The interesting product O(2)(-)(HF) is also formed from 1,1-difluoroethane. In contrast to the HFCs, perfluoro-n-hexane gives stable molecular anions, M(-), which at low source temperature or in humidified air are also detected as hydrates, M(-)(H(2)O). In addition, in humidified air F(-)(H(2)O)(n) complexes are also formed. The reactions leading to all major positive and negative product ions are discussed also with reference to available thermochemical data and relevant literature reports. The effects on both positive and negative APCI spectra due to ion activation via increasing V(cone) are also reported and discussed: several interesting endothermic processes are observed under these conditions. The results provide important information on the role of ionic reactions in non-thermal plasma processes.     

Structure and energetics of poly(ethylene glycol) cationized by Li(+), Na(+), K(+) and Cs(+): a first-principles study

Density functional theoretical methods, including several basis sets and two functional, were used to collect information on the structure and energetic parameters of poly(ethylene glycol) (PEG), also referred to as poly(ethylene oxide) (PEO), coordinated by alkali metal ions. The oligomer chain is found to form a spiral around the alkali cation, which grows to roughly two helical turns when the oligomer size increases to about the decamer for each alkali ion. Above this size, the additional monomer units do not build the spiral further for Li(+) and Na(+); instead, they form less organized segments outside or next to the initial spiral. The distance of the first layer of co-ordinating O atoms from the alkali cation is 1.9-2.15 ? for Li(+), 2.3-2.5 ? for Na(+), 2.75-3.2 ? for K(+) and 3.5-3.8 ? for Cs(+) complexes. The number of O atoms in the innermost shell is five, six, seven and eleven for Li(+), Na(+), K(+) and Cs(+). The collision cross sections with He increase linearly with the oligomer to a very good approximation. No sign of leaning towards the 2/3 power dependence characterizing spherical particles is observed. The binding energy of the cation to the oligomer increases up to polymerization degree of about 10, where it levels off for each alkali-metal ion, indicating that this is approximately the limit of the oligomer size that can be influenced by the alkali cation. The binding energy-degree of polymerization curves are remarkably parallel for the four cations. The limiting binding energy at large polymerization degrees is about 544 kJ mol(-1), 460 kJ mol(-1), 356 kJ mol(-1) and 314 kJ mol(-1) for Li, Na, K and Cs, respectively. The geometrical features are compared with the X-ray and neutron diffraction data on crystalline and amorphous phases of conducting polymers formed by alkali-metal salts and PEG. The implications of the observations concerning collision cross sections and binding energies to ion mobility spectroscopy and mass spectrometry are discussed.     

Hydration energies in the gas phase of select (MX)mM+ ions, where M+ = Na+, K+, Rb+, Cs+, NH4+ and X- = F-, Cl-, Br-, I-, NO2-, NO3-. Observed magic numbers of (MX)mM+ ions and their possible significance

The sequential hydration energies and entropies with up to four water molecules were obtained for MXM(+) = NaFNa(+), NaClNa(+), NaBrNa(+), NaINa(+), NaNO(2)Na(+), NaNO(3)Na(+), KFK(+), KBrK(+), KIK(+), RbIRb(+), CsICs(+), NH(4)BrNH(4)(+), and NH(4)INH(4)(+) from the hydration equilibria in the gas phase with a reaction chamber attached to a mass spectrometer. The MXM(+) ions as well as (MX)(m)M(+) and higher charged ions such as (MX)(m)M(2)(2+) were obtained with electrospray. The observed trends of the hydration energies of MXM(+) with changing positive ion M(+) or the negative ion X(-) could be rationalized on the basis of simple electrostatics. The most important contribution to the (MXM-OH(2))(+) bond is the interaction of the permanent and induced dipole of water with the positive charge of the nearest-neighbor M(+) ion. The repulsion due to the water dipole and the more distant X(-) has a much smaller effect. Therefore, the bonding in (MXM-OH(2))(+) for constant M and different X ions changes very little. Similarly, for constant X and different M, the bonding follows the hydration energy trends observed for the naked M(+) ions. The sequential hydration bond energies for MXM(H(2)O)(n)(+) decrease with n in pairs, where for n = 1 and n = 2 the values are almost equal, followed by a drop in the values for n = 3 and n = 4, that again are almost equal. The hydration energies of (MX)(m)M(+) decrease with m. The mass spectra with NaCl, obtained with electrospray and observed in the absence of water vapor, show peaks of unusually high intensities (magic numbers) at m = 4, 13, and 22. Experiments with variable electrical potentials in the mass spectrometer interface showed that some but not all of the ion intensity differentiation leading to magic numbers is due to collision-induced decomposition of higher mass M(MX)(m)(+) and M(2)(MX)(m)(2+) ions in the interface. However, considerable magic character is retained in the absence of excitation. This result indicates that the magic ions are present also in the saturated solution of the droplets produced by electrospray and are thus representative of particularly stable nanocrystals in the saturated solution. Hydration equilibrium determinations in the gas phase demonstrated weaker hydration of the magic ion (NaCl)(4)Na(+).     

Laser desorption/ionization and laser ablation synthesis of new selenium oxide compounds from selenium(IV) dioxide

Laser desorption/ionization (LDI) and/or laser ablation (LA) of selenium dioxide crystals or its mixtures with sodium peroxide were studied using a commercial matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometer. It was found that LDI and LA of selenium (IV) dioxide not only ionizes SeO(2), but also leads to the formation of several positively and negatively singly charged species: SeO(n) (+) (n = 0-2), Se(2) (+), SeO(n) (-) (n = 0-4), Se(2)O(n) (-) (n = 3-7), Se(3)O(n) (-) (n = 4-9), Se(4)O(n) (-) (n = 8-10). A rather high yield of selenium species in the positive ion mode, Se(m) (+) (m = 1-8) and Se(m)OH(+) (m = 3-7), was obtained by using the MALDI approach while the species detected in the negative ion mode, SeO(n) (-) (n = 0-4), Se(2)O(n) (-) (n = 3-7), Se(3)O(n) (-) (n = 4-9), and Se(4)O(n) (-) (n = 9, 10), were the same as those observed during LDI/LA of selenium dioxide. The addition of sodium peroxide to selenium dioxide with the aim of enhancing its oxidation and thus increasing the production of SeO(4) product resulted in extensive cationization of the species with sodium or potassium. The following positively and negatively charged species were identified: Se(+), Se(2) (+), Se(2)OH(+), Se(2)ONa(+), SeO(n) (-) (n = 0-3), and Se(2)O(n) (-) (n = 0, 1, 4). Also observed in mass spectra of such mixtures, various mixed sodium and/or potassium adducts with selenium oxide species, e.g. Se(2)O(4)K(2)Na(-), were identified. In all, 26 totally new species, Se(2)O(n) (-) (n = 3-6), Se(3)O(n) (-) (n = 4-9), Se(4)O(n) (-) (n = 8-10), Se(4)O(11)H(5) (-), Se(4)O(12)H(3) (-), Se(2)O(4)Na(-), Se(2)O(5)HNa(-), Se(2)O(5)HNa(2) (-), Se(3)O(6)K(2)Na(-), Se(3)O(6)K(2)Na(2) (-), Se(2)ONa(+), and Se(m)OH(+) (m = 3-7), were described for the first time. Also, for the first time, the formation of selenium(IV) diperoxide, O-O-Se-O-O or O(2)SeO(2), is described. The stoichiometries of the compounds generated were confirmed using isotopic pattern modeling.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water coordination on the structure and properties of L-arginine and zwitterionic L-arginine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. The effect of metal ions and water on the structure of L-arginine is examined. The effects of metal ions (Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+)) and water on structures of Arg x M(H2O)m , m = 0, 1 complexes have been determined theoretically by employing the density functional theories (DFT) and using extended basis sets. Of the three stable complexes investigated, the relative stability of the gas-phase complexes computed with DFT methods (with the exception of K(+) systems) suggests metallic complexes of the neutral L-arginine to be the most stable species. The calculations of monohydrated systems show that even one water molecule has a profound effect on the relative stability of individual complexes. Proton dissociation enthalpies and Gibbs energies of arginine in the presence of the metal cations Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+) were also computed. Its gas-phase acidity considerably increases upon chelation. Of the Lewis acids investigated, the strongest affinity to arginine is exhibited by the Cu(2+) cation. The computed Gibbs energies DeltaG(o) are negative, span a rather broad energy interval (from -150 to -1500 kJ/mol), and are appreciably lowered upon hydration.