Energy conserving approximations to the quantum potential: dynamics with linearized quantum force

Solution of the Schrodinger equation within the de Broglie-Bohm formulation is based on propagation of trajectories in the presence of a nonlocal quantum potential. We present a new strategy for defining approximate quantum potentials within a restricted trial function by performing the optimal fit to the log-derivatives of the wave function density. This procedure results in the energy-conserving dynamics for a closed system. For one particular form of the trial function leading to the linear quantum force, the optimization problem is solved analytically in terms of the first and second moments of the weighted trajectory distribution. This approach gives exact time-evolution of a correlated Gaussian wave function in a locally quadratic potential. The method is computationally cheap in many dimensions, conserves total energy and satisfies the criterion on the average quantum force. Expectation values are readily found by summing over trajectory weights. Efficient extraction of the phase-dependent quantities is discussed. We illustrate the efficiency and accuracy of the linear quantum force approximation by examining a one-dimensional scattering problem and by computing the wavepacket reaction probability for the hydrogen exchange reaction and the photodissociation spectrum of ICN in two dimensions.     

Incorporation of quantum effects for selected degrees of freedom into the trajectory-based dynamics using spatial domains

The approach of defining quantum corrections on nuclear dynamics of molecular systems incorporated approximately into selected degrees of freedom, is described. The approach is based on the Madelung-de-Broglie-Bohm formulation of time-dependent quantum mechanics which represents a wavefunction in terms of an ensemble of trajectories. The trajectories follow classical laws of motion except that the quantum potential, dependent on the wavefunction amplitude and its derivatives, is added to the external, classical potential. In this framework the quantum potential, determined approximately for practical reasons, is included only into the "quantum" degrees of freedom describing light particles such as protons, while neglecting with the quantum force for the heavy, nearly classical nuclei. The entire system comprised of light and heavy particles is described by a single wavefunction of full dimensionality. The coordinate space of heavy particles is divided into spatial domains or subspaces. The quantum force acting on the light particles is determined for each domain of similar configurations of the heavy nuclei. This approach effectively introduces parametric dependence of the reduced dimensionality quantum force, on classical degrees of freedom. This strategy improves accuracy of the quantum force and does not restrict interaction between the domains. The concept is illustrated for two-dimensional scattering systems, where the quantum force is required to reproduce vibrational energy of the quantum degree of freedom.     

Efficient evaluation of the accuracy of molecular quantum dynamics on an approximate analytical or interpolated ab initio potential energy surface

Ab initio electronic structure methods have reached a satisfactory accuracy for the calculation of static properties, but remain too expensive for quantum dynamical calculations. Recently, an efficient semiclassical method was proposed to evaluate the accuracy of quantum dynamics on an approximate potential without having to perform the expensive quantum dynamics on the accurate potential. Here, this method is applied for the first time to evaluate the accuracy of quantum dynamics on an approximate analytical or interpolated potential in comparison to the quantum dynamics on an accurate potential obtained by an ab initio electronic structure method. Specifically, the vibrational dynamics of H₂ on a Morse potential is compared with that on the full CI potential, and the photodissociation dynamics of CO₂ on a LEPS potential with that on the excited ¹Π surface computed at the EOM‐CCSD/aug‐cc‐pVDZ level of theory. Finally, the effect of discretization of a potential energy surface on the quantum dynamics is evaluated. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem 110:2426–2435, 2010     

Few-body quantum and many-body classical hyperspherical approaches to reactions and to cluster dynamics

The hyperspherical method is a widely used and successful approach for the quantum treatment of elementary chemical processes. It has been mostly applied to three-atomic systems, and current progress is here outlined concerning the basic theoretical framework for the extension to four-body bound state and reactive scattering problems. Although most applications only exploit the advantages of the hyperspherical coordinate systems for the formulation of the few-body problem, the full power of the technique implies representations explicitly involving quantum hyperangular momentum operators as dynamical quantities and hyperspherical harmonics as basis functions. In terms of discrete analogues of these harmonics one has a universal representation for the kinetic energy and a diagonal representation for the potential (hyperquantization algorithm). Very recently, advances have been made on the use of the approach in classical dynamics, provided that a hyperspherical formulation is given based on “classical” definitions of the hyperangular momenta and related quantities. The aim of the present paper is to offer a retrospective and prospective view of the hyperspherical methods both in quantum and classical dynamics. Specifically, regarding the general quantum hyperspherical approaches for three- and four-body systems, we first focus on the basis set issue, and then we present developments on the classical formulation that has led to applications involving the implementations of hyperspherical techniques for classical molecular dynamics simulations of simple nanoaggregates.     

Reaction path potential for complex systems derived from combined ab initio quantum mechanical and molecular mechanical calculations

Combined ab initio quantum mechanical and molecular mechanical calculations have been widely used for modeling chemical reactions in complex systems such as enzymes, with most applications being based on the determination of a minimum energy path connecting the reactant through the transition state to the product in the enzyme environment. However, statistical mechanics sampling and reaction dynamics calculations with a combined ab initio quantum mechanical (QM) and molecular mechanical (MM) potential are still not feasible because of the computational costs associated mainly with the ab initio quantum mechanical calculations for the QM subsystem. To address this issue, a reaction path potential energy surface is developed here for statistical mechanics and dynamics simulation of chemical reactions in enzymes and other complex systems. The reaction path potential follows the ideas from the reaction path Hamiltonian of Miller, Handy and Adams for gas phase chemical reactions but is designed specifically for large systems that are described with combined ab initio quantum mechanical and molecular mechanical methods. The reaction path potential is an analytical energy expression of the combined quantum mechanical and molecular mechanical potential energy along the minimum energy path. An expansion around the minimum energy path is made in both the nuclear and the electronic degrees of freedom for the QM subsystem internal energy, while the energy of the subsystem described with MM remains unchanged from that in the combined quantum mechanical and molecular mechanical expression and the electrostatic interaction between the QM and MM subsystems is described as the interaction of the MM charges with the QM charges. The QM charges are polarizable in response to the changes in both the MM and the QM degrees of freedom through a new response kernel developed in the present work. The input data for constructing the reaction path potential are energies, vibrational frequencies, and electron density response properties of the QM subsystem along the minimum energy path, all of which can be obtained from the combined quantum mechanical and molecular mechanical calculations. Once constructed, it costs much less for its evaluation. Thus, the reaction path potential provides a potential energy surface for rigorous statistical mechanics and reaction dynamics calculations of complex systems. As an example, the method is applied to the statistical mechanical calculations for the potential of mean force of the chemical reaction in triosephosphate isomerase.     

Computation of correlation functions and wave function projections in the context of quantum trajectory dynamics

The de Broglie-Bohm formulation of the Schrodinger equation implies conservation of the wave function probability density associated with each quantum trajectory in closed systems. This conservation property greatly simplifies numerical implementations of the quantum trajectory dynamics and increases its accuracy. The reconstruction of a wave function, however, becomes expensive or inaccurate as it requires fitting or interpolation procedures. In this paper we present a method of computing wave packet correlation functions and wave function projections, which typically contain all the desired information about dynamics, without the full knowledge of the wave function by making quadratic expansions of the wave function phase and amplitude near each trajectory similar to expansions used in semiclassical methods. Computation of the quantities of interest in this procedure is linear with respect to the number of trajectories. The introduced approximations are consistent with approximate quantum potential dynamics method. The projection technique is applied to model chemical systems and to the H+H(2) exchange reaction in three dimensions.     

Calibration of force-field dependency in free energy landscapes of peptide conformations by quantum chemical calculations

The free energy landscapes of peptide conformations were calibrated by ab initio quantum chemical calculations, after the enhanced conformational diversity search using the multicanonical molecular dynamics simulations. Three different potentials of mean force for an isolated dipeptide were individually obtained by the multicanonical molecular dynamics simulations using the conventional force fields, AMBER parm94, AMBER parm96, and CHARMm22. Each potential of mean force was then calibrated based upon the umbrella sampling algorithm from the adiabatic energy map that was calculated separately by the ab initio molecular orbital method, and all of the calibrated potentials of mean force coincided well. The calibration method was also applied to the simulations of a peptide dimer in explicit water models, and it was shown that the calibrated free energy landscapes did not depend on the force field used in the classical simulations, as far as the conformational space was sampled well. The current calibration method fuses the classical free energy calculation with the quantum chemical calculation, and it should generally make simulations for biomolecular systems much more reliable when combining with enhanced conformational sampling.     

Semiclassical nonadiabatic dynamics based on quantum trajectories for the O(3P,1D) + H2 system

The O(3P,1D) + H2 --> OH + H reaction is studied using trajectory dynamics within the approximate quantum potential approach. Calculations of the wave-packet reaction probabilities are performed for four coupled electronic states for total angular momentum J = 0 using a mixed coordinate/polar representation of the wave function. Semiclassical dynamics is based on a single set of trajectories evolving on an effective potential-energy surface and in the presence of the approximate quantum potential. Population functions associated with each trajectory are computed for each electronic state. The effective surface is a linear combination of the electronic states with the contributions of individual components defined by their time-dependent average populations. The wave-packet reaction probabilities are in good agreement with the quantum-mechanical results. Intersystem crossing is found to have negligible effect on reaction probabilities summed over final electronic states.     

A semiclassical initial-value representation for quantum propagator and boltzmann operator

Starting from the position-momentum integral representation, we apply the correction operator method to the derivation of a uniform semiclassical approximation for the quantum propagator and then extend it to approximate the Boltzmann operator. In this approach, the involved classical dynamics is determined by the method itself instead of given beforehand. For the approximate Boltzmann operator, the corresponding classical dynamics is governed by a complex Hamiltonian, which can be described as a pair of real Hamiltonian systems. It is demonstrated that the semiclassical Boltzmann operator is exact for linear systems. A quantum propagator in the complex time is thus proposed and preliminary numerical results show that it is a reasonable approximation for calculating thermal correlation functions of general systems. © 2018 Wiley Periodicals, Inc.     

Bohmian mechanics with complex action: a new trajectory-based formulation of quantum mechanics

In recent years there has been a resurgence of interest in Bohmian mechanics as a numerical tool because of its local dynamics, which suggest the possibility of significant computational advantages for the simulation of large quantum systems. However, closer inspection of the Bohmian formulation reveals that the nonlocality of quantum mechanics has not disappeared-it has simply been swept under the rug into the quantum force. In this paper we present a new formulation of Bohmian mechanics in which the quantum action, S, is taken to be complex. This leads to a single equation for complex S, and ultimately complex x and p but there is a reward for this complexification-a significantly higher degree of localization. The quantum force in the new approach vanishes for Gaussian wave packet dynamics, and its effect on barrier tunneling processes is orders of magnitude lower than that of the classical force. In fact, the current method is shown to be a rigorous extension of generalized Gaussian wave packet dynamics to give exact quantum mechanics. We demonstrate tunneling probabilities that are in virtually perfect agreement with the exact quantum mechanics down to 10(-7) calculated from strictly localized quantum trajectories that do not communicate with their neighbors. The new formulation may have significant implications for fundamental quantum mechanics, ranging from the interpretation of non-locality to measures of quantum complexity.     

Evaluation of nonlinear quantum time correlation functions within the centroid dynamics formulation

A method to evaluate nonlinear centroid correlation functions is presented that is amenable to simple numerical computation. It can be implemented with the centroid molecular dynamics method for approximate quantum dynamics with no additional assumptions. Two nonlinear correlation functions are evaluated for a model potential using this scheme and compared with results from exact quantum calculations.     

Renormalization of the frozen Gaussian approximation to the quantum propagator

The frozen Gaussian approximation to the quantum propagator may be a viable method for obtaining "on the fly" quantum dynamical information on systems with many degrees of freedom. However, it has two severe limitations, it rapidly loses normalization and one needs to know the Gaussian averaged potential, hence it is not a purely local theory in the force field. These limitations are in principle remedied by using the Herman-Kluk (HK) form for the semiclassical propagator. The HK propagator approximately conserves unitarity for relatively long times and depends only locally on the bare potential and its second derivatives. However, the HK propagator involves a much more expensive computation due to the need for evaluating the monodromy matrix elements. In this paper, we (a) derive a new formula for the normalization integral based on a prefactor free HK propagator which is amenable to "on the fly" computations; (b) show that a frozen Gaussian version of the normalization integral is not readily computable "on the fly"; (c) provide a new insight into how the HK prefactor leads to approximate unitarity; and (d) how one may construct a prefactor free approximation which combines the advantages of the frozen Gaussian and the HK propagators. The theoretical developments are backed by numerical examples on a Morse oscillator and a quartic double well potential.     

Hybrid quantum/classical molecular dynamics for a proton transfer reaction coupled to a dissipative bath

A hybrid quantum/classical molecular dynamics approach is applied to a proton transfer reaction represented by a symmetric double well system coupled to a dissipative bath. In this approach, the proton is treated quantum mechanically and all bath modes are treated classically. The transition state theory rate constant is obtained from the potential of mean force, which is generated along a collective reaction coordinate with umbrella sampling techniques. The transmission coefficient, which accounts for dynamical recrossings of the dividing surface, is calculated with a reactive flux approach combined with the molecular dynamics with quantum transitions surface hopping method. The hybrid quantum/classical results agree well with numerically exact results in the spatial-diffusion-controlled regime, which is most relevant for proton transfer in proteins. This hybrid quantum/classical approach has already been shown to be computationally practical for studying proton transfer in large biological systems. These results have important implications for future applications to hydrogen transfer reactions in solution and proteins.     

Thermal Gaussian molecular dynamics for quantum dynamics simulations of many-body systems: application to liquid para-hydrogen

A new method, here called thermal Gaussian molecular dynamics (TGMD), for simulating the dynamics of quantum many-body systems has recently been introduced [I. Georgescu and V. A. Mandelshtam, Phys. Rev. B 82, 094305 (2010)]. As in the centroid molecular dynamics (CMD), in TGMD the N-body quantum system is mapped to an N-body classical system. The associated both effective Hamiltonian and effective force are computed within the variational Gaussian wave-packet approximation. The TGMD is exact for the high-temperature limit, accurate for short times, and preserves the quantum canonical distribution. For a harmonic potential and any form of operator A?, it provides exact time correlation functions C(AB)(t) at least for the case of B, a linear combination of the position, x, and momentum, p, operators. While conceptually similar to CMD and other quantum molecular dynamics approaches, the great advantage of TGMD is its computational efficiency. We introduce the many-body implementation and demonstrate it on the benchmark problem of calculating the velocity time auto-correlation function for liquid para-hydrogen, using a system of up to N = 2592 particles.     

Prediction of nitroxide hyperfine coupling constants in solution from combined nanosecond scale simulations and quantum computations

We present a combined theoretical approach based on analyzing molecular dynamics trajectories (at the nanosecond scale) generated by use of classical polarizable force fields and on quantum calculations to compute averaged hyperfine coupling constants. That method is used to estimate the constant of a prototypical nitroxide: the dimethylnitroxide. The molecule is embedded during the simulations in a cubic box containing about 500 water molecules and the molecular dynamics is generated using periodic conditions. Once the trajectories are achieved, the nitroxide and its first hydration shell molecules are extracted, and the coupling constants are computed by considering the latter aggregates by means of quantum computations. However, all the water molecules of the bulk are also accounted for during those computations by means of the electrostatic potential fitted method. Our results exhibit that in order to predict accurate and reliable coupling constants, one needs to describe carefully the out-of-plane motion of the nitroxide nitrogen and to sample trajectories with a time interval of 400 fs at least to generate an uncorrelated large set of nitroxide structures. Compared to Car-Parrinello molecular dynamics techniques, our approach can be used readily to compute hyperfine coupling constants of large systems, such as nitroxides of great size interacting with macromolecules such as proteins or polymers.     

The IR spectrum of supercritical water: Combined molecular dynamics/quantum mechanics strategy and force field for cluster sampling

Supercritical water was analyzed recently as a gas of small clusters of waters linked to each other by intermolecular hydrogen‐bonds, but unexpected “linear” conformations of clusters are required to reproduce the infra‐red (IR) spectra of the supercritical state. Aiming at a better understanding of clusters in supercritical water, this work presents a strategy combining classical molecular dynamics to explore the potential energy landscape of water clusters with quantum mechanical calculation of their IR spectra. For this purpose, we have developed an accurate and flexible force field of water based on the TIP5P 5‐site model. Water dimers and trimers obtained with this improved force field compare well with the quantum mechanically optimized clusters. Exploration by simulated annealing of the potential energy surface of the classical force field reveals a new trimer conformation whose IR response determined from quantum calculations could play a role in the IR spectra of supercritical water. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Simulating quantum dynamics in classical environments

Methods for simulating the dynamics of composite systems, where part of the system is treated quantum mechanically and its environment is treated classically, are discussed. Such quantum–classical systems arise in many physical contexts where certain degrees of freedom have an essential quantum character while the other degrees of freedom to which they are coupled may be treated classically to a good approximation. The dynamics of these composite systems are governed by a quantum–classical Liouville equation for either the density matrix or the dynamical variables which are operators in the Hilbert space of the quantum subsystem and functions of the classical phase space variables of the classical environment. Solutions of the evolution equations may be formulated in terms of surface-hopping dynamics involving ensembles of trajectory segments interspersed with quantum transitions. The surface-hopping schemes incorporate quantum coherence and account for energy exchanges between the quantum and classical degrees of freedom. Various simulation algorithms are discussed and illustrated with calculations on simple spin-boson models but the methods described here are applicable to realistic many-body environments.