Extractive spectrophotometric determination of palladium with N,N,N',N'-tetra(2-ethylhexyl)-thiodiglycolamide T(2EH)TDGA

A precise, sensitive and selective method for the spectrophotometric determination of palladium (II) using N,N,N′,N′-tetra(2-ethylhexyl) thiodiglycolamide T(2EH)TDGA as an extractant is described. Palladium (II) forms yellow colored complex with T(2EH)TDGA which exhibits an absorption maximum at ∼300 nm. The colored complex obeys Beer's law in the concentration range 1.0-15.0 μg ml⁻¹ of palladium with a molar absorptivity of 1.29 × 10⁵ M⁻¹ cm⁻¹. The effects of various experimental parameters have been studied to establish the optimum conditions for the extraction and determination of palladium. The precision of the method has been evaluated and the relative standard deviation has been found to be less than 0.5%. The method has been successfully applied to the determination of palladium in simulated high level liquid waste (SHLW) solution.     

Polyisobutylene-supported N-heterocyclic carbene palladium catalysts

This paper describes how the nonpolar polymer polyisobutylene (PIB) can be used as a handle to prepare PIB-bound NHC ligands that are soluble in monophasic mixtures of mixed solvents but phase separable when such solvent systems are perturbed to be biphasic. The results here show that such PIB-bound NHC ligands can be used to synthesize useful palladium catalysts. In this paper, both PIB-bound analogs of an N,N′-bis(2,6-diisopropylphenyl) heterocyclic carbene and simpler N,N′-dialkyl heterocyclic carbene ligand were prepared and were successfully used to form palladium cross-coupling catalysts. The reactivity, recycling and reusability of these catalysts has been examined.     

Phosphine-free Pd-salen complexes as efficient and inexpensive catalysts for Heck and Suzuki reactions under aerobic conditions

Phosphine-free palladium-salen complexes, N,N′-bis(salicylidene)-ethylenediamino-palladium and N,N′-bis(salicylidene)-1,2-phenylenediamino palladium, are found to be highly active catalysts for the Heck olefination of aryl iodides and Suzuki reaction of aryl iodides and bromides giving excellent yields (70-90%) of products under aerobic conditions, in short reaction times (10-60 min).     

Hydrodehalogenation of halogenated pyridines and quinolines by sodium borohydride/N,N,N′,N′-tetramethylethylenediamine under palladium catalysis

A protocol for the hydrodehalogenation of halogenated pyridines and quinolines by the sodium borohydride/N,N,N′,N′-tetramethylethylenediamine (NaBH₄-TMEDA) system under palladium catalysts is reported. Catalytic amounts of [1,1′-bis(diphenylphosphino)ferrocene] dichloropalladium(II) in combination with NaBH₄-TMEDA rapidly hydrodehalogenate chloro(bromo)-pyridines and -quinolines at room temperature in quantitative yields. Chemoselective reduction of 4,7-dichloroquinoline affords 7-chloroquinoline as the sole product in almost quantitative yield. Moreover, palladium(II) acetate-triphenylphosphine and NaBH₄-TMEDA are able to reduce efficiently reactive bromo-pyridines and -quinolines.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.     

P′CP′-Pincer palladium complex-catalyzed allylation of N,N-dimethylsulfamoyl-protected aldimines

The P′CP′-pincer palladium complex-catalyzed allylation of N,N-dimethylsulfamoyl-protected aldimines with allyl(tributyl)stannane is investigated for the preparation of N-homoallylic sulfamides. The desired N,N-dimethylsulfamoyl-protected products are obtained in moderate to high yields in DMF under very mild conditions and a high yielding and convenient deprotection of the N,N-dimethylsulfamoyl group is also demonstrated.     

Fluorescent sensing system for palladium(II) based on the Heck reaction

In this paper, we report a fluorescent sensing system based on the palladium-catalyzed Heck reaction between N-methyl vinylpyridinium and 4-bromo-N,N′-dimethylaniline. Generation of a new fluorophore as a product enhances fluorescence and permits selective detection of palladium(II) among other metal species.     

Separation of chelating agents as copper complexes by capillary zone electrophoresis using quaternary ammonium bromides as additives in N-methylformamide

This study presents the use of quaternary ammonium bromides as additives in N-methylformamide (NMF) for the separation and quantification of chelating agents as copper complexes by capillary zone electrophoresis (CZE). The new quaternary ammonium bromides were synthesized in our laboratory and used for the first time for CZE applications performed in NMF media. The methods were developed and optimized for determination of six chelating agents (trans-1,2-diaminocyclohexane-N,N,N′,N′-tetraacetic acid (CDTA), diethylenetriaminepentaacetic acid (DTPA), ethylenediaminetetraacetic acid (EDTA), N-(2-hydroxyethyl)ethylenediamine-N,N′,N′-triacetic acid (HEDTA), nitrilotriacetic acid (NTA) and triethylenetetraaminehexaacetic acid (TTHA)) as copper complexes. Among the tested electrolyte additives in NMF media (pH_app 10.2) dimethyldioctylammonium bromide (DMDOAB), dimethyldinonylammonium bromide (DMDNAB) and dimethyldidecylammonium bromide (DMDDAB), at a concentration of 20 mmol L⁻¹ improved the separation of the copper complexes. The optimized methods require only 12 min for one analysis, and the detection limits for copper complexes of DMDNAB, the best-performing additive, were ≤24 μmol L⁻¹. Relative standard deviations (R.S.D.) for migration times were ≤2.5, ≤2.1, ≤3.1% and for peak areas, ≤3.1, ≤3.0, ≤3.2% for DMDOAB, DMDNAB and DMDDAB used as additives, respectively. All three methods were successfully applied to the analysis of natural and wastewater samples. No matrix effects from these samples were observed. The interaction between quaternary ammonium bromides and copper complexes is discussed.     

Palladium containing nanostructured silica functionalized with pyridine sites: a versatile heterogeneous catalyst for Heck, Sonogashira, and cyanation reactions

Nanostructured hybrid silica bearing pyridine binding sites was prepared in a template assisted hydrolysis-polycondensation of tetraethylorthosilicate (TEOS) and the ionic precursor N,N-dimethyl-pyridin-4-yl-(3-triethoxysilyl-propyl)-ammonium iodide using N-dodecyl-N′-methyl-imidazolium bromide as structure directing agent. After treatment with palladium acetate, the material appeared as a versatile heterogeneous catalyst for Heck, Sonogashira, and cyanation reactions. In Heck and Sonogashira cross-coupling reactions, unchanged catalytic activity was observed in at least five reaction cycles.     

An environmentally benign procedure for the Cu-catalyzed cyanation of aryl bromides

The development of a general Cu-catalyzed synthesis of (hetero)aromatic nitriles from the corresponding aryl bromides and potassium hexacyanoferrate(II) is described. This novel protocol avoids the use of highly toxic alkali cyanides and precious palladium catalysts. Best results were achieved applying Cu(BF₄)₂·6H₂O (0.1 equiv) and N,N′-dimethyl ethylenediamine (DMEDA; 1.0 equiv) in N,N-dimethyl acetamide (DMAc).     

Synthesis of N,N-difluoroboryl complexes of 3,3′-diarylazadiisoindolylmethenes

N,N-Difluoroboryl complexes of 3,3′-diarylazadiisoindolylmethenes were synthesized by the reaction of BF₃·OEt₂ and 3,3′-diarylazadiisoindolylmethenes, which were easily prepared from a reaction between phthalonitrile and aryl Grignard reagents. These novel dyes exhibit strong absorption in the visible region and intense fluorescence in the vis/NIR region. Their synthesis, characterization, and optical properties are reported in this Letter.     

Synthesis and characterization of difunctional blue light-emitting molecules containing hole-transporting triphenylamino units

The synthesis of new difunctional (i.e., light-emitting and hole-transporting) fluorophore molecules, 2,2′-difuryl-4,4′-(N,N,N′,N′-tetraphenyl)diaminobiphenyl and 5,5′-bis(4-N,N′-diphenylaminophenyl)-2,2′-bifuryl, which contain hole-transporting triphenylamino units, are reported. These difunctional molecules emit intense blue photoluminescence and further reveal high HOMO energy values as well as high glass transition temperatures.     

Preconcentration and separation of copper (II) with solvent extraction using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane

Preconcentration and separation with solvent extraction of Cu(II) from aqueous solution using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane (H₂L) as the new extractant has been studied. Separation of Cu(II) from other metal ions such as Cd(II), Ni(II), Zn(II), Pb(II), Cr(III), Co(II) and Mn(II) at aqueous solutions of various pH values and complexing agent H₂L, has been described. The possible extraction mechanism and the compositions of the extracted species have been determined. The separation factors for these metals using this reagent are reported while efficient methods for the separation of Cu(II) from other metal ions are proposed. From the loaded organic phase, Cu(II) stripping was carried out in one stage with different mineral acid solutions. The stripping efficiency was found to be quantitative in case of HNO₃ and HCl. From quantitative evaluation of the extraction equilibrium data, it has been deduced that the complex extracted is the simple 1:1 chelate, CuL. The extraction constant has a value of logK_ex=−4.05±0.04.     

Synthesis and structural characterization of mixed carbene-carboxylate complexes of palladium(II)

Mixed carbene-carboxylate complexes of Palladium(II) have been prepared by reacting {1,1^′-dimethyl-3,3^′-methylenediimidazoline-2,2^′-diylidene} palladium(II) diiodide (1) [Angew. Chem. 107 (1995) 2602; Angew. Chem. Int. Ed. Engl. 34 (1995) 2371; J. Organomet. Chem. 557 (1998) 93] with AgO₂CR, where R=CF₃, CF₂CF₃ and CF₂CF₂CF₃. In this manner, {1,1^′-dimethyl-3,3^′-methylenediimidazoline-2,2^′-diylidene} palladium(II) bis(trifluo-roacetate) (2), {1,1^′-dimethyl-3,3^′-methylenediimidazoline-2,2^′-diylidene} palladium(II) bis(pentafluoropropionate) (3) and {1,1^′-dimethyl-3,3^′-methylenediimidazoline-2,2^′-diylidene} palladium(II) bis(heptafluorobutyrate) (4) were obtained. All three complexes were fully characterized by ¹H-, ¹³C- and ¹⁹F NMR spectroscopy as well as ESI mass spectrometry. X-ray crystal structure analyses of complexes 3 and 4 reveal mononuclear species with a square planar metal center coordinated by a cis-chelating dicarbene and two monodentate carboxylate ligands. The results show that the introduction of a cis-chelating N,N-heterocyclic carbene ligand stabilizes the palladium-carboxylate moiety effectively.     

From N,N-diphenyl-N-naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl-amine to propeller-shaped N,N,N-tri(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)-amine: syntheses and structures

Three unique propeller-shaped helicenyl amines compounds: N,N-diphenyl-N-naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl-amine (1), N-phenyl-N,N-di(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)amine (2), and N,N,N-tri(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)amine (3) were efficiently synthesized by Wittig reaction and oxidative photocyclization. The crystal structures of 1, 2 and molecular configuration optimization (DFT-B3LYP/6-31+G(d)) of 3 reveal that the steric hindrance from the moiety of trithia[5]helicene effectively forces the nitrogen atom and the three bonded carbon atoms to coplanar and the interplanar angles of the facing terminal thiophene ring and benzene ring becoming larger when the helical arm increased from 1 to 3. Electrochemical properties and UV–vis absorption behaviors of 1, 2, 3 were primarily determined by the moiety of trithia[5]helicene.     

Chirality induction of polyaniline derivatives through chiral complexation

Chirality induction of π-conjugated polyaniline derivatives was achieved by chiral complexation with chiral palladium(II) complexes. The crystal structure of the chiral conjugated complex with a model compound of the polyaniline, N,N-bis(4^′-dimethylaminophenyl)-1,4-benzoquinonediimine, revealed a chiral propeller twist conformation of the π-conjugated moiety.     

Helicity of N,N′-diaryl-trans-1,2-diaminocyclohexane derivatives. Implications for molecular helicity manipulations

Derivatives of trans-1,2-diaminocyclohexane (DACH), useful as chiral ligands, scaffolds and building blocks, differ in their conformation. The conformation of N,N′-diaryl-DACH derivatives was studied by the semiempirical and DFT computational methods and by exciton-coupled circular dichroism. It was found that, contrary to M-helical N,N′-diimine, N,N′-diimide and N,N′-diamide derivatives, the aromatic residues in N,N′-diphenyl derivatives are oriented to form a P-helix for the (R,R)-DACH absolute configuration. The helicity of the bis-aryl system is modified in the case of 1-naphthyl or 2-naphthyl derivatives. Further switching of helicity has been demonstrated by either protonation or mono-N-acetylation of N,N′-diaryl DACH derivatives.     

Salen and half-salen palladium(II) complexes: synthesis, characteriztion and catalytic activity toward Suzuki-Miyaura reaction

Salen and half-salen palladium(II) complexes (salden)Pd (1, salden=N,N′-bis(3,5-di- tert-butylsalicylidene)-1,2-dimethylethylenediamine), (hsalph)PdCl (2, hsalph=3,5-di-tert- butylsalicylidene-1-iminophenylene-2-amine), and (salph)Pd (4, salph=N,N′-bis(3,5-di-tert- butylsalicylidene)-1,2-phenylenediamine) were prepared and structurally characterized by X-ray crystallography. Complex 2 proved to exhibit high catalytic activity toward Suzuki-Miyaura reaction. Polyaromatic C₃-symmetric derivatives and various fluorinated biphenyl derivatives were readily achieved in good yields using Suzuki-Miyaura reaction catalyzed by complex 2.     

Efficient synthesis of 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe2; OMe) by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene or by heterocoupling of 3,3′,5,5′-tetraethynylbiphenyl with p-X-phenylbromobenzene with nickel or palladium complexes, respectively

The conjugated 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl derivatives were efficiently obtained by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene mediated by zero-valent nickel complexes.The 1-bromo-3,5-di(p-X-phenylethynyl)benzene was previously prepared by heterocoupling between 1-bromo-3,5-di(ethynyl)benzene and p-X-iodobenzene (X: NMe₂; OMe) catalysed by the palladium/copper system in good yield. The necessary 1-bromo-3,5-di(ethynyl)benzene was obtained by heterocoupling between 1,3,5-tribromobenzene and 2-methyl-3-butyn-2-ol catalysed by palladium and successive treatment with sodium hydroxide in dry toluene, in good yield.The same 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe₂; OMe) derivatives were alternatively synthesised in highest yield by heterocoupling between 3,3′,5,5′-tetra(ethynyl)biphenyl and p-X-bromobenzene (X: NMe₂; OMe) catalysed by palladium in excellent yields. Previously, 3,3′,5,5′-tetra(ethynyl)biphenyl was obtained in practically quantitative yield by homocoupling of 1-bromo-3,5-di[4-(2-methyl-3-butyn-2-ol)] benzene mediated by the zero-valent nickel complex to the 3,3′,5,5′-tetra{di[4-(2-methyl-3-butyn-2-ol)]}biphenyl followed the treatment with sodium hydroxide.     

Copper(I) catalysis: Synthesis of N,N′-diarylated and N-aryl,N′-formylated chiral C2-symmetric diamines

Chiral N,N′-diaryl C₂-symmetric diamines and N-aryl,N′-formyl-trans-(1R,2R)-diaminocyclohexane are readily accessed by copper catalyzed N,N′-diarylation and N-aryl,N′-formylation of trans-(1R,2R)-diaminocyclohexane with aryl bromides. N,N′-diarylation using (R)-1,1′-binaphthyl-2,2′-diamine and iodobenzene gave the corresponding (R)-N,N′-diphenyl-1,1′-binaphthyl-2,2′-diamine derivative in 83% yield.