置换法制备铜纳米微粒和纳米棒(英)

0 IntroductionIn recentyears, the nanosized m etallic m aterialshave attracted m ore and m ore attention because oftheirvirtue ofunusualoptical, electronic, m agnetic,and chem icalproperties[1￣5].They are expected to havem any potential applications in d…     

基于碳纳米管和铁氰酸镍纳米颗粒协同作用的葡萄糖生物传感器

将制备的铁氰酸镍纳米颗粒(NiNP)与多壁碳纳米管(CNT)混合, 分散于壳聚糖溶液中, 形成一种新的纳米复合成分(NiNP-CNT-CHIT), 将其修饰在玻碳电极表面. 新复合膜体现了NiNP和CNT之间的协同作用, 由于CNT的良好的传递电子性能, 促使NiNP催化氧化还原能力有了较大的提高. 此NiNP-CNT-CHIT复合膜修饰的玻碳电极在较低电位下对过氧化氢具有良好的电催化性能, 与NiNP-CHIT膜比较, 测定H₂O₂的灵敏度增大了50倍. 通过戊二醛在电极表面固定葡萄糖氧化酶制备了一种新的葡萄糖传感器. 该传感器在－0.2 V下对葡萄糖的线性范围为0.05～10 mmol/L, 检测下限为10 μmol/L.     

一种新型的空心镍纳米球的合成

通过以二氧化硅粒子作为模板和金纳米粒子为表面晶种的方法制备了壳厚度可控的镍空心球。采用TEM﹑XRD对二氧化硅/镍复合球和镍空心球进行了表征和研究。结果表明镍纳米壳是由似针状的面心立方的镍纳米粒子构成的，碱溶液处理过程不影响镍纳米壳的形貌。高温处理显示镍空心球具有良好的热稳定性。     

泡沫镍及负载型镍催化剂制备纳米碳纤维层的研究

纳米碳纤维可用在催化材料、储氢材料、及纳米电子器件等方面。本文对用泡沫镍及负载型镍催化剂催化分解乙烯或丙烯制备纳米碳纤维进行了研究。利用X射线衍射仪、物理吸附仪、扫描电镜进行了分析表征,并考察了催化剂、碳源、生长温度对纳米碳纤维生长量、形貌、结构的影响。结果表明:在生长温度450℃,乙烯流率30mL/m in的条件下,负载型镍催化剂纳米碳纤维的生长量要高出泡沫镍3~6倍,负载型镍催化剂制备的纳米碳纤维直径为40~60纳米,小于泡沫镍的情况。泡沫镍催化分解乙烯制备纳米碳纤维时,纳米碳纤维的生长量和平均直径随温度的降低而逐渐减小。纳米碳纤维在泡沫镍上的最低生长温度为420℃,在低于480℃生长纳米碳纤维时泡沫镍的骨架结构不会被破坏,由此制备的纳米碳纤维在新型结构催化材料中有很好的的应用前景。     

两种制备铂纳米颗粒方法的比较

用乙醇回流及NaBH4还原两种方法制备了Pt纳米颗粒,用UV Vis光谱、TEM对铂纳米颗粒进行了表征,比较了两种合成方法的特点.     

银纳米颗粒的制备及表征

用鞣酸还原法制得了PVP保护的Ag纳米颗粒,并通过TEM、XRD、TG、DTA及FT IR对其结构进行了表征.结果表明在所选择的实验条件下制备了粒径小、单分散且化学稳定的Ag PVP纳米颗粒,其粒径约10nm,有良好的水分散性.PVP的加入和银氨络离子的形成对制备出小尺寸纳米银起了重要作用.     

制备纳米氧化锌的新方法

以草酸和醋酸锌为原料，用室温固相化学反应首先制备前驱物二水合草酸锌，后者在微波场辐射分解得到产物纳米氧化锌。用XRD，TEM和IR等技术对产物的组成，大小及形貌进行了表征。结果表明：产物纳米氧化锌为粒度分布均匀的球形六角晶系结构，平均粒径约为8nm。     

高结晶度硼酸镍纳米棒的制备及其电催化析氧性能研究

氢能被视为21世纪最具发展潜力的能源. 电解水制氢具有诸多优点,如原料来源广泛、操作简便、产品纯度高、无污染,已成为最具有应用前景的方法之一,但其阳极氧析出反应动力学缓慢,严重制约电解水制氢的效率. 因此,发展氧析出电催化剂尤为重要. 本文利用高温煅烧法制备了硼酸镍纳米棒,长度约为2 μm,直径约为200 nm. 与文献报道的低结晶度或无定型硼酸盐析氧催化剂不同,硼酸镍纳米棒的结晶度较高,并且具有较好的OER催化活性和稳定性. 其催化活性可以通过与其他导电材料复合或进一步减小其尺寸等方式提升.     

聚苯胺纳米颗粒的制备及其电化学性能

以乙醇和水为混合溶剂,采用氧化法制备了纳米尺度的聚苯胺颗粒。采用扫描电镜、红外光谱、循环伏安、恒流充放电及交流阻抗等测试手段对其结构和电化学性能进行了测试。研究了混合溶剂的比例对产物电化学性能的影响。结果表明：聚苯胺颗粒大小为50～100 nm;以制备的聚苯胺纳米颗粒为活性物质,在1 mol/L的H2SO4电解液中,当...     

基于金属有机骨架前驱体制备纳米磷化镍催化剂

采用镍基金属有机骨架化合物(Ni-MOF)为前驱体,通过低温碳化获得Ni@C,并通过磷化成功地制备了不同结构的磷化镍纳米颗粒。将所得材料应用于析氢反应(HER)催化剂,在Ni@C与红磷质量比为1∶1及热解温度为500℃时获得的Ni1P1-500表现出优异的电催化性能,在酸性介质中,电流密度为10 mA·cm-2时,过电位为178 mV,并展现了良好的循环性能。较小的Tafel斜率(62 mV·dec-1)揭示了析氢反应的机理为Desorption-Heyrovsky机制。优异的电催化性能可归因于磷化镍催化剂表面存在的质子受体(P位点)和氢化物受体(Ni位点)活性中心。     

一种便捷方法制备表面氨基化的超顺磁Fe_3O_4纳米粒子

提出了一种简便易行的对磁性纳米粒子表面进行氨基化的方法.首先使用化学共沉淀法合成了粒径为10 nm左右的Fe_3O_4纳米粒子,然后用阿仑膦酸钠对其表面进行修饰,使其表面具有了功能化的氨基.利用透射电子显微镜(TEM)、X射线衍射(XRD)、振动样品磁强计(VSM)、动态光散射(DLS)仪、热重分析(TGA)仪、傅里叶变换红外(FT-IR)光谱仪、X射线光电子能谱(XPS)仪等对其进行表征.结果显示磁性纳米粒子表面被成功地修饰了一层双膦酸分子.所制备的纳米粒子可在pH=6.3稳定存在4周以上.     

Studies on Mechanochemical Method to Synthesize LDH Nanoparticles

Magnesium‐ferrum layered double hydroxide (Mg‐Fe‐LDH) and zinic‐aluminum layered double hydroxide (Zn‐Al‐LDH) compounds were prepared through a mechanochemical method. The influence of molar ratio of M²⁺ to M³⁺ (R value) on the property of LDH nanoparticles has been studied and the results showed that R=3:1 is the optimum value for the both samples. Besides pure water, the mixture of water and ethanol with the volume ratio of 3:1 is also used to wash the precipitates and used as suspending agent during the peptization process and our results showed that the addition of ethanol can improve the monodispersity of LDH nanoparticles greatly.     

基于纳米铁氰化镍修饰二氧化钛纳米管阵列电极的非酶葡萄糖传感器

以二氧化钛纳米管阵列(TNTs)为基底,利用脉冲电沉积的方法将Ni纳米粒子沉积在TNTs管内,通过循环伏安法将Ni转化为铁氰化镍(NiHCF),构造了新型的非酶型葡萄糖生物传感器(NiHCF/TNTs修饰电极)。在优化的实验条件下,传感电极的灵敏度为663μA/(mmol cm2);响应电流与葡萄糖浓度在1～23mmol/L范围内呈现良好的线性关系。在低浓度检测下,线性范围为2×10-3～1.0 mmol/L;检出限为0.5μmol/L。本传感电极具有灵敏度高、稳定性好和抗干扰能力强等特点。     

New Method for Carbohydrates Determination in Sugarcane Bagasse by HPAEC‐RPAD Using Glassy Carbon Electrode Modified with Carbon Nanotubes and Nickel Nanoparticles

Second generation ethanol can be produced from carbohydrates released from both sugarcane bagasse cell wall and sugarcane straw. The development of new method for the analysis of carbohydrates is, in this sense, seen as extremely relevant in the area of bioenergy. Based on the above considerations, the scope of this work encompasses the identification and quantification of carbohydrates composition in sugarcane bagasse without the need of sample derivatization, developing a novel analytical method using a glassy carbon electrode modified with multi‐walled carbon nanotubes containing nickel oxyhydroxide nanoparticles (GCE/MWCNT/NiOOH) and applying the modified electrode as a detector in HPAEC (High Performance Anion‐Exchange Chromatography) with reverse pulsed amperometric detection (RPAD) towards the determination of arabinose, galactose, glucose and xylose in hydrolyzed sugarcane bagasse. The carbohydrates concentrations determined in the hydrolyzed sugarcane bagasse were 6.1×10⁻⁴ mol L⁻¹, 1.0×10⁻² mol L⁻¹ and 2.8×10⁻³ mol L⁻¹ for arabinose, glucose, and xylose respectively. Our results showed that the present method is, in essence, attractive for analysis in the course of the production process of second generation ethanol production in that it does not require sample derivatization, has rapid run time, satisfactory separation, and can be used for the detection of carbohydrates without the interference of other electroactive species.     

A Modular Approach to Introduce Function into Single‐Chain Polymeric Nanoparticles

Here, a modular approach is reported to introduce a specific function into single‐chain polymeric nanoparticles (SCPNs). Hereto, an amphiphilic polymer with pendant benzene‐1,3,5‐tricarboxamide (BTA) units is mixed with a “free” BTA that contains a functional group, either a fluorescent naphthalimide or a catalytically active l ‐proline. Taking advantage of hydrophobic interactions and self‐recognition properties of the BTA units, the “free” BTAs are captured into the interior of the SCPN in water as evidenced by fluorescence studies. To illustrate that function can be readily introduced using a modular approach, l ‐proline‐based BTAs are incorporated to procure a catalytically active SCPN in water. The aldol reaction between p‐nitrobenzaldehyde and cyclohexanone shows good conversions at low catalyst loadings and substrate concentrations, and high stereoselectivities are obtained (de = 91% and ee = 98%).

     

A Sensitive Simultaneous Determination of Epinephrine and Piroxicam Using a Glassy Carbon Electrode Modified with a Nickel Hydroxide Nanoparticles/Multiwalled Carbon Nanotubes Composite

The electrooxidation of epinephrine (EPI) and piroxicam (PRX) has been investigated by application of nickel hydroxide nanoparticles/multiwalled carbon nanotubes composite electrode (MWCNTs‐NHNPs/GCE) using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry (CA) methods. The modified electrode showed suitable electrochemical responses for EPI and PRX determination. Under the optimum conditions the electrode provides a linear response versus EPI and PRX concentrations in the range of 1–220 µM and 0.7–75 µM, respectively using the DPV method. Linear responses versus EPI and PRX concentrations in the range of 1–1000 µM and 1–800 µM, respectively, were obtained using the CA method. The modified electrode was used for determination of EPI and PRX in human urine with satisfactory results.     

一种便捷方法制备表面氨基化的超顺磁Fe3O4纳米粒子

提出了一种简便易行的对磁性纳米粒子表面进行氨基化的方法. 首先使用化学共沉淀法合成了粒径为10 nm左右的Fe3O4纳米粒子, 然后用阿仑膦酸钠对其表面进行修饰, 使其表面具有了功能化的氨基. 利用透射电子显微镜(TEM)、X射线衍射(XRD)、振动样品磁强计(VSM)、动态光散射(DLS)仪、热重分析(TGA)仪、傅里叶变换红外(FT-IR)光谱仪、X射线光电子能谱(XPS)仪等对其进行表征. 结果显示磁性纳米粒子表面被成功地修饰了一层双膦酸分子. 所制备的纳米粒子可在pH=6.3稳定存在4周以上.     

A Simple Approach to Control the Growth of Non-spherical Gold Nanoparticles

A simple method to prepare the non-spherical gold particles was developed. The result solution included trigonal, truncated trigonal, hexagonal layers, and a pseudo-pentagonal shaped gold nanocrystals. The key factor is to control the relative rates of nucleation and cluster growth in this method. These attributes make seeding growth method as a useful tool in the fabrication of colloidal metal materials. A longitudinal plasmon resonance of 866 nm was observed, which is in the near-IR spectral regions (600-1000 nm). The excellent optical properties as near-IR labels are used to develop highly sensitive analvsis method.     

Synthesis of pyran derivatives under ultrasound irradiation using Ni nanoparticles as reusable catalysts in aqueous medium

Ni nanoparticles (NPs)-catalysed synthesis of pyran derivatives was achieved by one-pot three-component reactions of aryl aldehydes/ketone, malononitrile and C–H activated compounds in aqueous medium under ultrasound irradiation. The present approach offer several advantages, such as shorter reaction time, higher yields, and environmental friendliness.