The Study of Electrochemical Behavior of Dopamine at Nano—gold Modified Carbon Fiber Electrode

In the field of detection of neurotransmitters carbon fiber ultramicroelectrode has attracted extensive attention due to its specific features such as particular steady state diffusion profiles and very small IR drop values as well as the ability to work in living organism1. Carbon fiber microelectrodes have been used successfully to detect dopamine in vivo2,3. The electrochemical behavior of dopamine at nano-gold modified carbon fiber electrode was studied in this paper. The electrochemica…     

纳米ZnO修饰电极的制备及其对血红蛋白, 细胞色素c的直接电化学研究

A novel electrochemical method as a sensitive and convenient technique for the determination of heme proteins based on their interaction with ZnO nanorods was developed. A ZnO nanorod modified glassy carbon electrode (ZnO/GCE) was prepared and the electrochemical behaviors of heme proteins, such as hemoglobin (HB) and cytochrome c (Cyt-c), on this modified electrode have been studied. The results showed that both HB and Cyt-c could be oxidized on the modified electrode and the oxidation currents were linear to the concentrations of the analytes in aqueous solutions. In addition, the results of flow injection analysis (FIA) further suggested the high stability and reproducibility of the ZnO nanorod modified electrode. So this method can be applied to the determination of HB and Cyt-c in biological systems.     

Preparation, Electrochemical Behavior and Electrocatalytic Activity of a Copper Hexacyanoferrate Modified Ceramic Carbon Electrode

A copper hexacyanoferrate modified ceramic carbon electrode （CuHCF/CCE） had been prepared by two-step sol-gel technique and characterized using electrochemical methods. The resulting modified electrode showed a pair of well-defined surface waves in the potential range of 0.40 to 1.0 V with the formal potential of 0.682 V （vs. SCE） in 0.050 mol·dm^-3 HOAc-NaOAc buffer containing 0.30 mol·dm^-3 KCl. The charge transfer coefficient （a） and charge transfer rate constant （ks） for the modified electrode were calculated. The electrocatalytic activity of this modified electrode to hydrazine was also investigated, and chronoamperometry was exploited to conveniently determine the diffusion coefficient （D） of hydrazine in solution and the catalytic rate constant （kcat）. Finally, hydrazine was determined with amperometry using the resulting modified electrode. The calibration plot for hydrazine determination was linear in 3.0 × 10^-6--7.5 × 10^-4 mol·dm^-3 with the detection limit of 8.0 × 10^-7 molodm^-3. This modified electrode had some advantages over the modified film electrodes constructed by the conventional methods, such as renewable surface, good long-term stability, excellent catalytic activity and short response time to hydrazine.     

RESEARCHES ON CHEMICALLY MODIFIED ELECTRODE——THE PREPARATION OF ELECTROCHEMISTRY POLYMERIZED FERROCENE DERIVATIVE FILM MODIFIED ELECTRODE

The voltammetric behaviour of ferrocene drivatives (α-hydroxy-, 1, 1′-bisα-hydroxyethyl-, aceto-, 1, 1′-bis-aceto-) has been studied in acetonotrile and aqueous solution. The electrochemical polymerization of such ferrocene metal]lo-organic compounds was first discovered under electrochemical initiation. Electrochemistry polymerized ferrocene derivative film modified electrode and the polymerizatibn mechanism have been presented and investigated. Electrochemical polymerization proceeds simply and rapidly, the polymerization process can be controlled, and the polymer film is stable and attaches firmly to the electrode. It is a new practical method for preparing modified electrode.     

Electrochemical determination of vitamin C in the presence of uric acid by a novel TiO2 nanoparticles modified carbon paste electrode

<正>The electrochemical behavior of vitamin C(ascorbic acid or AA) is investigated on the surface of a carbon-paste electrode modified with TiO_2 nanoparticles and 2,2'-(1,2 butanediylbis(nitriloethylidyne))-bis-hydroquinone(BBNBH).The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid(UA).The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.     

Influence of TiO_2 on the electrochemical performance of pasted typeβ-nickel hydroxide electrode in alkaline electrolyte

Nickel hydroxide was used as the positive electrode material in rechargeable alkaline batteries, which plays a significant role in the field of electric energy storage devices. β-nickel hydroxide(β-Ni(OH)_2 ) was prepared from nickel sulphate solution using potassium hydroxide as a precipitating agent. Pure β-phase of nickel hydroxide was confirmed from XRD and FT-IR studies. The effects of TiO_2 additive on the β-Ni(OH)_2 electrode performance are examined. The structure and property of the TiO_2 added β-Ni(OH)_2 were characterized by XRD, TG-DTA and SEM analysis. A pasted–type electrode is prepared using nickel hydroxide powder as the main active material on a nickel sheet as a current collector. Cyclic voltammetry and electrochemical impedance spectroscopy studies were performed to evaluate the electrochemical performance of the β-Ni(OH)_2 and TiO_2 added β-Ni(OH)_2 electrodes in 6 M KOH electrolyte. Anodic(Epa) and cathodic(Epc)peak potentials are found to decrease after the addition of TiO 2 into β-Ni(OH)_2 electrode material. Further,addition of TiO_2 is found to enhance the reversibility of the electrode reaction and also increase the separation of the oxidation current peak of the active material from the oxygen evolution current. Compared with pure β-Ni(OH)_2 lectrode,TiO_2 added β-Ni(OH)_2 electrode is found to exhibit higher proton diffusion coefficient(D) and lower charge transfer resistance. These findings suggest that the TiO_2 added β-Ni(OH)_2 electrode possess improved electrochemical properties and thus can be recognized as a promising candidate for the battery electrode applications.     

Electrochemical sensor based on f-SWCNT and carboxylic group functionalized PEDOT for the sensitive determination of bisphenol A

A simple,sensitive,and reliable method for the voltammetric determination of bisphenol A(BPA) by using carboxylic group functionalized single-walled carbon nanotubes(f-SWCNT)/carboxylic-functionalized poly(3,4-ethylenedioxythiophene)(PC4) complex modified glassy carbon electrode(GCE) has been successfully developed.The electrochemical behavior of BPA at the surface of the modified electrode is investigated by electrochemical techniques.The cyclic voltammetry results show that the as-prepared electrode exhibits strong catalytic activity toward the oxidation of BPA with a well-defined anodic peak at 0.623 V in PBS(0.1 mol/L,pH 7.0).The surface morphology of the 3D network of composite film is beneficial for the adsorption of analytes.Under the optimized conditions,the oxidation peak current is proportional to BPA concentration in the range between 0.099 and 5.794 μmol/L(R~2 = 0.9989),with a limit of detection of 0.032 μmol/L(S/N = 3).The enhanced performance of the sensor can be attributed to the excellent electrocatalytic property of/-SWCNT and the extraordinary conductivity of PC4.Furthermore,the proposed modified electrode displays high stability and good reproducibility.The good result on the voltammetric determination of BPA also indicates that the asfabricated modified electrode will be a good candidate for the electrochemical determination and analysis of BPA.     

Electorchemical Studies of Cytochrome c on Electodes Modified by Single—Wall Carbon Naotubes

Single-wall carbon nanotubes(SWNTs) modified gold electrodes were prepared by using two different methods.The electrochemical behavior of cytochrome c on the modified gold electrodes was investigated.The first kind of SWNT-modified electrode (noted as SWNT/Au electrode)was prepared by the adsorption of carboxylterminated SWNTs from DMF dispersion on the gold electrode.The oxidatively processed SWNT tips were covalently modified by coupling with amines (AET) to form amide linkage.Via Au-S chemical bonding,the self-assembled monolayer of thiol-unctionalized nanotubes on gold surface was fabricated so as to prepare the others SWNT-modified electrode (noted as SWNT/AET/Au electrode).It was shown from cyclic voltammetry cxperiments that cytochrome c exhibited direct electrochemical responses on the both electrodes, but only the current of controlled diffusion existed on the SWNT/Au electrode while both the currents of controlled diffusion and adsorption of cytochrome c occurred on the SWNT/AET/Au electrode.Photoelastic Modulation Infared Reflection Absorpthion Spectroscopy (PEM-IRRAS) and Quartz Crystal Microbalance (QCM) were employed to verify the adsorption of SWNTs on the gold electrodes.The results proved that SWNTs could enhance the direct electron transfer proecss between the electrodes and redox proteins.     

Electrochemical determination of quercetin by self-assembled platinum nanoparticles/poly(hydroxymethylated-3,4-ethylenedioxylthiophene) nanocomposite modified glassy carbon electrode

A simple and sensitive platinum nanoparticles/poly(hydroxymethylated-3,4-ethylenedioxylthiophene)nanocomposite(PtNPs/PEDOT-MeOH) modified glassy carbon electrode(GCE) was successfully developed for the electrochemical determination of quercetin.Scanning electron microscopy and energy dispersive X-ray spectroscopy results indicated that the PtNPs were inserted into the PEDOTMeOH layer.Compared with the bare GCE and poly(3,4-ethylenedioxythiophene)(PEDOT) electrodes,the PtNPs/PEDOT-MeOH/GCE modified electrode exhibited a higher electrocatalytic ability toward the oxidation of quercetin due to the synergic effects of the electrocatalytic activity and strong adsorption ability of PtNPs together with the good water solubility and high conductivity of PEDOT-MeOH.The electrochemical sensor can be applied to the quantification of quercetin with a linear range covering0.04-91 μmol L~(-1) and a low detection limit of 5.2 nmol L~(-1).Furthermore,the modified electrode also exhibited good reproducibility and long-term stability,as well as high selectivity.     

Application of silver electrode to the electrochemical studies of hemoglobin

Several aspects of the application of silver electrode to the electrochemical studies of hemoglobin have been discussed in this paper . The silver electrode could not only be used directly as the electrode for the electrochemical studies of hemoglobin, but also react with phenothiazine and benzimidazole to give stable and useful mediator-coated electrodes. In addition, the silver electrode could help sodium dodecyl sulfate to give full play to its promoting effect on the protein.     

柠檬酸修饰(CA/GC)电极对多巴胺(DA)和肾上腺素(EP)同时检测

应用电沉积方法制备柠檬酸修饰电极(CA/GC), 差分脉冲法研究多巴胺(DA)和肾上腺素(EP)在该修饰电极上的电化学行为．结果表明, 两样品DA、EP在该电极的还原峰电位差380 mV, 而抗坏血酸(AA)在此电位区无还原峰, 因此可实现该修饰电极对DA和EP的同时检测, 而且高浓度AA不发生干扰．在pH 6.0的磷酸盐缓冲液中, DA和EP还原峰电流与其浓度分别在1.0×10-6 ~ 6.0×10-5 mol•L-1和2.0×10-6 ~ 6.0×10-5 mol•L-1 范围内呈线性关系．CA/GC电极制备简单, 重现性好, 可望用于多巴胺针剂(DA)和肾上腺素针剂(EP)的同时检测     

银掺杂聚L-酪氨酸修饰电极同时测定多巴胺、肾上腺素和抗坏血酸

用循环伏安法制备银掺杂聚L-酪氨酸修饰玻碳电极,研究了多巴胺、肾上腺素和抗坏血酸在其电极上的电化学行为,建立了同时测定多巴胺、肾上腺素和抗坏血酸的新方法。当3种组分共存时,在磷酸盐缓冲溶液(pH6.0)中,扫描速率为140mV/s,多巴胺和肾上腺素在修饰电极上分别产生还原峰,峰电位分别为0.198和-0.205V,多巴胺和肾上腺素氧化峰重叠,峰电位为0.313V(vs.Ag/AgCl);抗坏血酸产生一个氧化峰,峰电位0.108V(vs.Ag/AgCl)。多巴胺和肾上腺素的ΔEpc=0.403V,抗坏血酸的氧化峰与多巴胺和肾上腺素的ΔEpa=0.205V,用还原峰和氧化峰可同时测定多巴胺、肾上腺素和抗坏血酸,3种组分同时测定的线性范围分别为5.0×10-6～1.0×10-4mol/L,8.0×10-6～1.0×10-4mol/L和3.0×10-5～1.0×10-3mol/L;检出限分别为5.0×10-7,8.0×10-7和5.0×10-6mol/L。本方法用于人尿液中多巴胺、肾上腺素和抗坏血酸的同时测定,结果满意。     

Selective Voltammetric Detection of Epinephrine in the Presence of Ascorbic Acid at Poly(4-Methoxyphenol)-Modified Electrode1

A gold electrode was modified with electropolymerized films of 4-methoxyphenol by its oxidative polymerization from an alkaline solution by cyclic voltammetry. The modified electrode was then used to determine epinephrine (EP) in the presence of a high concentration of ascorbic acid (AA) by differential pulse voltammetry. The peak positions as well as relative sensitivity EP/AA were affected by the potential window used for the polymerization. For polymerization between 0 and 1.3 V, the peak potentials recorded in a phosphate buffer solution (pH = 7.2) were 516 and 312 mV vs. Ag/AgCl for EP and AA, respectively. In addition the effects of pH and the type of electrolyte on the linearity range and detection limit are investigated. The detection limit for 3s-test is 0.1 M. The high selectivity and sensitivity for epinephrine was found to be due to charge discrimination/analyte accumulation.     

Simultaneous determination of epinephrine, uric acid and xanthine in the presence of ascorbic acid using an ultrathin polymer film of 5-amino-1,3,4-thiadiazole-2-thiol modified electrode

This paper describes the simultaneous determination of epinephrine (EP), uric acid (UA) and xanthine (XN) in the presence of ascorbic acid (AA) using electropolymerized ultrathin film of 5-amino-1,3,4-thiadiazole-2-thiol (p-ATT) modified glassy carbon (GC) electrode in 0.2 M phosphate buffer solution (pH 5). Although bare GC electrode resolves the voltammetric signals of AA and XN, it fails to resolve the voltammetric signals of EP and UA in a mixture. However, the p-ATT modified electrode not only separates the voltammetric signals of AA, EP, UA and XN with potential difference of 150, 120 and 400 mV between AA-EP, EP-UA and UA-XN, respectively but also shows higher oxidation current for these molecules. The p-ATT modified electrode exhibits excellent selectivity towards the oxidation of EP, UA and XN in the presence of 40-fold higher concentration of AA. Further, the p-ATT modified electrode was also used for the selective determination of EP in the presence of 40-fold higher concentrations of AA, UA and XN. Using amperometric method, we achieved the lowest detection of 40 nM EP and 60 nM each UA and XN. The amperometric current response was increased linearly with increasing EP concentration in the range of 4.0 × 10⁻⁸ to 4.0 × 10⁻⁵ M and the detection limit was found to be 27 × 10⁻¹¹ M (S/N = 3). The practical application of the present modified electrode was demonstrated by determining the concentration of EP in epinephrine tartrate injection and XN in human urine samples.     

Caffeic Acid‐Modified Glassy Carbon Electrode for the Simultaneous Determination of Epinephrine and Dopamine

A stable electroactive thin film of poly(caffeic acid) has been deposited on the surface of a glassy carbon electrode by potentiostatic technique in an aqueous solution containing caffeic acid. The electrochemical behaviors of epinephrine (EP), dopamine (DA) and their mixture have been studied. The oxidation peaks of EP and DA at the poly(caffeic acid) modified glassy carbon electrode appeared at the same potential, but the anodic peak currents of the mixture of DA and EP were almost equal to the sum of individual anodic peak currents of EP and DA, whereas the cathodic peak current only related to the concentration of DA under appropriate condition. Base on these, the simultaneous voltammetric measurement of EP and DA at the poly(caffeic acid) film modified electrode has been developed. Ascorbic acid (AA) had no interference with the simultaneous determination of EP and DA under the same condition because the oxidative peak potential of AA was less than those of DA and EP. The modified electrode has been satisfactorily used for the simultaneous determination of EP and DA in real samples.     

Modified microelectrodes and multivariate calibration for flow injection amperometric simultaneous determination of ascorbic acid, dopamine, epinephrine and dipyrone

Flow injection amperometric quantification of ascorbic acid (AA), dopamine (DA), epinephrine (EP) and dipyrone (DI) in mixtures (in the microgram g-1 range) was successfully performed by using an array of microelectrodes with units modified by the electrodeposition of different noble metals, together with multivariate calibration analysis. The four groups of microelectrodes utilized included a pure gold electrode and electrodes modified by electrodeposition of platinum, palladium or a mixture of platinum + palladium. The array of microelectrodes was inserted in a flow cell and the amperometric data acquisition was performed with a four-channel potentiostat. The analysis of the resulting signals was carried out by a multivariate calibration method, using a group of 16 standard mixtures selected by a two-level factorial design. The analysis of synthetic samples and pharmaceutical compounds containing AA and DI led to very similar values to those obtained by the classical iodimetric analysis. The average absolute errors (in microgram g-1) calculated for each analyte were 0.3, 0.2, 0.4 and 0.4 for AA, DA, EP and DI, respectively.     

Electroanalysis and simultaneous determination of dopamine and epinephrine at poly(isonicotinic acid)-modified carbon paste electrode in the presence of ascorbic acid

A carbon paste electrode modified with electropolymerized fills of isonicotinic acid was developed.The modified electrode shows excellent electrocatalytic activity toward the oxidation of both dopamine(DA)and epinephrine(EP).Separation of the reduction peak potentials for dopamine and epinephrine was about 357 mV in pH 5.3 phosphate buffer solution(PBS)and the character was used for the detection DA and EP simultaneously.The peak currents increase linearly with DA and EP concentration over the range of 8.0×10-5 to 7.0×10-4 mol/L and 5.0×10-6 to 1.0×10-4 mol/L with detection limits of 2 × 10-5 and 1×10-6 mol/L,respectively.The interference studies showed that the modified electrode exhibits excellent selectivity in the presence of large excess of ascorbic acid(AA).     

Selective Electrochemical Epinephrine Sensor Using Self‐Assembled Monomolecular Film of 1,8,15,22‐Tetraaminophthalocyanatonickel(II) on Gold Electrode

This article describes the highly sensitive and selective determination of epinephrine (EP) using self‐assembled monomolecular film (SAMF) of 1,8,15,22‐tetraamino‐phthalocyanatonickel(II) (4α‐Ni^IITAPc) on Au electrode. The 4α‐Ni^IITAPc SAMF modified electrode was prepared by spontaneous adsorption of 4α‐Ni^IITAPc from dimethylformamide solution. The modified electrode oxidizes EP at less over potential with enhanced current response in contrast to the bare Au electrode. The standard heterogeneous rate constant (k°) for the oxidation of EP at 4α‐Ni^IITAPc SAMF modified electrode was found to be 1.94×10^?2 cm s^?1 which was much higher than that at the bare Au electrode. Further, it was found that 4α‐Ni^IITAPc SAMF modified electrode separates the voltammetric signals of ascorbic acid (AA) and EP with a peak separation of 250 mV. Using amperometric method the lowest detection limit of 50 nM of EP was achieved at SAMF modified electrode. Simultaneous amperometric determination of AA and EP was also achieved at the SAMF modified electrode. Common physiological interferents such as uric acid, glucose, urea and NaCl do not interfere within the potential window of EP oxidation. The present 4α‐Ni^IITAPc SAMF modified electrode was also successfully applied to determine the concentration of EP in commercially available injection.     

Epinephrine Oxidation in the Presence of Interfering Molecules on Gold and Gold Electrodes modified with Gold Nanoparticles and Thiodipropionic Acid in Aqueous Solution. A Comparative Study

Thiodipropionoc acid (TDPA), cysteamine (CA) and gold nanoparticles (Au‐NPs) modified gold pure electrodes have been applied in voltammetric sensors for simultaneous detection of epinephrine (EP), ascorbic (AA) and uric (UA) acids. Modified electrodes with self assembled layers (SAMs) show high selectivity, sensitivity, reproducibility and stability. A linear relationship between the epinephrine concentration and the current response is obtained in the range of 0.1 μM to 0.65 μM with the detection limit ≤0.065 μM for the electrodes modified at 2D surface and in the range of 0.1 μM to 0.75 μM with the detection limit ≤0.082 μM for the electrodes modified at the 3D surface.     

Selective determination of epinephrine in the presence of ascorbic acid and uric acid by electrocatalytic oxidation at poly(eriochrome black T) film-modified glassy carbon electrode.

An electropolymerized film of eriochrome black T (EBT) has been prepared at a glassy carbon electrode (GCE) by cyclic voltammetry (CV). The poly(EBT) membrane at GCE exhibits an excellent electrocatalytic activity towards the oxidation of epinephrine (EP), ascorbic acid (AA) and uric acid (UA) in acidic solution and reduced the overpotential for the oxidation of EP. The poly(EBT)-coated electrode could separately detect EP, AA and UA in their mixture with the potential differences of 180 and 160 mV for EP-AA and UA-EP, respectively, which are large enough to allow for determination of EP in the presence of AA and UA. Using differential pulse voltammetry, the peak current of EP recorded in pH 3.5 solution was linearly dependent on EP's concentration in the range of 2.5 - 50 microM. Due to its good selectivity and stability, the polymer-coated GCE was successfully applied to the determination of EP in real samples.