A nucleophilic substitution reaction performed in different types of self-assembly structures

A nucleophilic substitution reaction between 4-tert-butylbenzyl bromide and potassium iodide has been performed in oil-in-water microemulsions based on various C12Em surfactants, i.e., dodecyl ethoxylate with m number of oxyethylene units. The reaction kinetics was compared with the kinetics of reactions performed in other self-assembly structures based on very similar surfactants and in homogeneous liquids. The reaction was fastest in the micellar system, intermediate in rate in the microemulsions, and most sluggish in the liquid crystalline phase. Reaction in a Winsor I system, i.e., a two-phase system comprising an oil-in-water microemulsion in equilibrium with excess oil, was equally fast as reaction in a one-phase microemulsion. The reactions in microemulsion were surprisingly fast compared to reaction in homogeneous, protic liquids such as methanol and ethanol. The rate was independent of the microstructure of the microemulsion; however, the rate was very dependent on the type of surfactant used. When the C12Em surfactant was replaced by a sugar-based surfactant, octyl glucoside, the reaction was much more sluggish. The high reactivity in microemulsions based on C12Em surfactants is belived to be due to a favorable microenvironment in the reaction zone. The reaction is likely to occur within the surfactant palisade layer, where the water activity is relatively low and where the attacking species, the iodide ion, is poorly hydrated and, hence, more nucleophlic than in a protic solvent such as water or methanol. Sugar surfactants become more hydrated than alcohol ethoxylates and the lower reactivity in the microemulsion based on the sugar surfactant is probably due to a higher water activity in the reaction zone.     

States of water located in the continuous organic phase of 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/triethylamine reverse microemulsions.

We demonstrate a novel ionic liquid (IL) microemulsion, consisting of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and nonionic surfactant Triton X-100 prepared in triethylamine which is used either as an organic solvent or a Lewis base. The effects of small amounts of added water on the microstructure of the IL microemulsion are investigated by various techniques. UV/Vis spectroscopic analysis and FTIR spectra indicate that these water molecules are not solubilized into the IL pools of the microemulsions. 1H NMR spectra further show that the added water binds with triethylamine to form a surrounding OH- base environment. Some of OH- ions enter the palisade layers of the IL microemulsions and a continuous base interface is created. The unique solubilization behavior of water reveals that it is possible to use the triethylamine microemulsions as a template to prepare metal hydroxides as well as metal oxides in the microemulsions, which is not possible when using traditional microemulsions.     

Application of surfactants and microemulsions to the extraction of pyrene and phenanthrene from soil with three different extraction methods

In the present work, the use of surfactants and oil-in-water (O/W) microemulsions as alternative extractants in accelerated solvent extraction (ASE) for the extraction of polycyclic aromatic hydrocarbons (pyrene and phenanthrene) from soils was investigated. In particular, the effect of each individual component within the microemulsions, i.e., oil phase, surfactant and co-surfactatnt, and extraction conditions on the percentage recovery was systematically studied. When compared to the water and organic solvent, the important findings were that the common surfactant solutions at the concentrations above their critical micelle concentrations (CMC) were shown to enhance the percentage recovery at the lower extraction temperature. Moreover, the highest percentage recovery can be obtained using microemulsion as the extractant. The chemical component within the microemulsions and relative amounts of the oil phase appeared to play a much more significant role in ensuring high percentage recovery. Finally, an overall comparison between the percentage recoveries obtained with ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE) and ASE using organic solvents, surfactants and microemulsions as extractants was exhibited.     

Water Solubilization in Mixed Nonionic Surfactants Microemulsions

The systems investigated were water/sucrose laurate/ethoxylated mono-di-glyceride/oleic phase. The oleic phase used first was the pure oils R (+)-limonene, isopropylmyristate, and caprylic-capric triglyceride; these oils were then mixed with ethanol at different mixing ratios (w/w). The total area of the one phase microemulsion region is dependent on the mixing ratios (w/w) of the mixed surfactants and that of the ethanol/oil. The largest microemulsion phase area formed with a surfactants mixing ratio (w/w) equals unity. For the systems where the oleic phase was a mixture of oil and ethanol, the total area of the monophasic microemulsion increases with the increase in the ethanol/oil mixing ratio (w/w). The Gibbs free energy of solubilization was estimated. It increases as the mixing ratio (w/w) of ethoxylated mono-di-glyceride/sucrose laurate increases and with the increase in the ethanol/oil mixing ratio (w/w). The Gibbs free energy of solubilization decreases with the increase in the water content in the water-in-oil microemulsions. The values of the Gibbs free energy of solubilization are higher for oil-in-water microemulsions compared to those of the water-in-oil microemulsions.     

Preparation of Microemulsion from an Alkyl Polyglycoside Surfactant and Tea Tree Oil

Preparation and characterization of microemulsions consisting of a plant-derived alkyl polyglycoside (APG) surfactant and the essential oil of Melaleuca alternifolia (tea tree) was studied. This nonionic APG surfactant used was Triton CG-110 with a CMC at 1748 ppm at 25 °C. Tea tree oil (TTO) was extracted from tea tree leaves by Triton CG-110-assisted hydrodistillation method. The preparation of the microemulsion was aided by the construction of pseudo-ternary phase diagrams, which were investigated at the different weight ratios of surfactant mixtures (S_mix = Triton CG-110/PPG) as 0.6:1, 1.8:1, 1:0 with hydrodistilled and commercial TTO by water titration method at room temperature. Particularly, structure of microemulsion was identified by electrical conductivity and viscosity. Moreover, shelf stability of some microemulsion made of 1% TTO with various concentration of Triton CG-110/PPG (1.8:1 w/w) were monitored for over a two-month period with dynamic light scattering. These results showed that microemulsion made of 1% TTO, 9% Triton CG-110/PPG (1.8:1 w/w) was insensitive with time and temperature of storage.     

Sucrose ester-based biocompatible microemulsions as vehicles for aceclofenac as a model drug: formulation approach using D-optimal mixture design

We assessed the functionality of sucrose esters (sucrose laurate, myristate, palmitate, and stearate), relatively innocuous nonionic surfactants, in formulation of biocompatible microemulsions. The putative influence of surfactant structure on the extension of microemulsion region was explored through the construction of the pseudo-ternary phase diagrams for the isopropyl myristate/sucrose ester-isopropyl alcohol/water system, using the titration method and mixture experimental approach. Minor changes in surfactant tail length strongly affected the microemulsion area boundaries. D-optimal mixture design proved to be highly applicable in detecting the microemulsion regions. Examination of conductivity, rheology, and thermal behavior of the selected sucrose laurate and sucrose myristate-based microemulsions, upon dilution with water, indicated existence of percolation threshold and suggested the phase inversion from water-in-oil to oil-in-water via a bicontinuous structure. Atomic force micrographs confirmed the suggested type of microemulsions and were valuable in further exploring their inner structure. The solubilization capacity of aceclofenac as a model drug has decreased as the water volume fraction in microemulsion increased. High surfactant concentration and the measured solubility of aceclofenac in microemulsion components suggested that the interfacial film may mostly contribute to aceclofenac solubilization.     

Solubilization of Celecoxib in Microemulsions Based on Mixed Nonionic Surfactants and Peppermint Oil

U-type microemulsions formulated with water, mixed nonionic surfactants, and peppermint oil were used to solubilize celecoxib. Microemulsion dilution and interfacial factors contributing to the celecoxib solubilization were evaluated. Celecoxib solubilization capacity decreases with the increase in the water content. Electrical conductivity, dynamic viscosity, and SAXS measurements reveal the structural transition occurring in the microemulsion region. It was found that below 0.25 aqueous phase volume fraction the water-in-oil microemulsions are present, the transition between the water-in-oil to bicontinuous and then to oil-in water microemulsions occur at 0.30 and 0.8 aqueous phase volume fraction, respectively. The results demonstrate that the solubilized drug affects the transition from bicontinuous to water-in-oil microemulsions. The solubilized drug increases the hydrodynamic radius of the oil-in-water microemulsion droplets measured by dynamic light scattering.     

Study of nano-emulsion formation by dilution of microemulsions

The influence of different dilution procedures on the properties of oil-in-water (O/W) nano-emulsions obtained by dilution of oil-in-water (O/W) and water-in-oil (W/O) microemulsions has been studied. The system water/SDS/cosurfactant/dodecane with either hexanol or pentanol as cosurfactant was chosen as model system. The dilution procedures consisted of adding water (or microemulsion) stepwise or at once over a microemulsion (or water). Starting emulsification from O/W microemulsions, nano-emulsions with droplet diameters of 20 nm are obtained, independently on the microemulsion composition and the dilution procedure used. In contrast, starting emulsification from W/O microemulsions, nano-emulsions are only obtained if the emulsification conditions allow reaching the equilibrium in an O/W microemulsion domain during the process. These conditions are achieved by stepwise addition of water over W/O microemulsions with O/S ratios at which a direct microemulsion domain is crossed during emulsification. The nature of the alcohol used as cosurfactant has been found to play a key role on the properties of the nano-emulsions obtained: nano-emulsions in the system using hexanol as cosurfactant are smaller in size, lower in polydispersity, and have a higher stability than those with pentanol.     

Temperature-induced phase separation in pseudoternary mixtures of Triton X-100–butanol–kerosene–water

The transparent Winsor IV domain in the phase diagram of the mixtures of emulsifier (Triton X-100 and butanol), oil (kerosene), and water is found to be 34% of the total phase diagram in presence of emulsifier with surfactant:cosurfactant::1:1, and is water dominant. Increase in cosurfactant/surfactant ratio inverts the Winsor IV domain to become oil rich. The plot of conductance of the microemulsions prepared by substituting water by brine against water content depicts the existence of three distinct phases like oil-in-water, bicontinuous, and water-in-oil microemulsion in the phase diagram. The phase contrast micrographs of the mixtures of different compositions in these three different phases reveal the existence of microdroplets of oil dispersed in water and water dispersed in oil. Further, the dynamic light scattering studies of these solutions reveal an inhomogeneity in the size distribution of the droplets. A temperature-induced clouding in the microemulsion domain leading to phase separation has been observed. Additives like glucose, sucrose, and sodium chloride decrease the cloud point (CP), while addition of ammonium thiocyanate increases it. A quantitative relationship of the clouding temperature with the composition of the microemulsion has been established. With increase in oil and emulsifier, the cloud point of the microemulsion increases. The separated phases after the clouding have been used for preconcentration of water-soluble metal ions as well as oil-soluble dyes. The turbid systems on heating led to separation into three isotropic phases which are found to be stable at ambient temperature. The stability of these phases is ascribed to the formation of stable microemulsions by mass transfer from one phase to other.     

Inhibition of Triton X-100／n-C5H11OH／H2O System on Hydrolysis of Cephanone

The hydrolysis of cephanone in Triton X-100 micelle and Triton X-100/n-C5H11OH/H2O(O/W) microemulsion were studied by means of UV-Vis absorption spectroscopy. The results show that compared with water, Triton X-100 micelle and Triton X-100/n-C5H11OH/H2O (O/W) microemulsion can inhibit the hydrolysis of cephanone. The inhibition effects of Triton X-100 micelle and Triton X-100/n-C5H11OH/H2O (O/W) microemulsion on the hydrolysis of cephanone are related to the location of cephanone in the interphases of Triton X-100 miceUes and Triton X-100/n-C5H11OH/H2O(O/W) microemulsion droplets.     

Magnesium hydroxide nanoparticles synthesized in water-in-oil microemulsions

Well-dispersed magnesium hydroxide nanoplatelets were synthesized by a simple water-in-oil (w/o) microemulsion process, blowing gaseous ammonia (NH(3)) into microemulsion zones solubilized by magnesium chloride solution (MgCl(2)). Typical quaternary microemulsions of Triton X-100/cyclohexane/n-hexanol/water were used as space-confining microreactors for the nucleation, growth, and crystallization of magnesium hydroxide nanoparticles. The obtained magnesium hydroxide was characterized by field-emission scanning electron microscopy (FESEM), high-resolution transmission election microscopy (HRTEM), X-ray powder diffraction (XRD), laser light scattering, Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis-differential scanning calorimetry (TGA-DSC). The mole ratio of water to surfactant (omega(0)) played an important role in the sizes of micelles and nanoparticles, increasing with the increase of omega(0). The compatibility and dispersibility of nanoparticles obtained from reverse micelles were improved in the organic phase.     

A novel water-in-ionic liquid microemulsion and its interfacial effect on the activity of laccase

It is of great significance to develop an appropriate water-in-ionic liquid (W/IL) microemulsion suitable for the expression of the catalytic activity of a given enzyme. In this paper, the phase diagram of a new AOT/Triton X-100/H(2)O/[Bmim][PF(6)] pseudo ternary system is presented. With the aid of nonionic surfactant Triton X-100, AOT could be dissolved in hydrophobic ionic liquid [Bmim][PF(6)], forming a large single phase microemulsion region. The water-in-[Bmim][PF(6)] (W/IL) microemulsion domain was identified electrochemically by using K(3)Fe(CN)(6) as a probe. The existence of W/IL microemulsions was demonstrated spectrophotometrically by using CoCl(2) as a probe. New evidences from the FTIR spectroscopic study, which was first introduced to the W/IL microemulsion by substituting D(2)O for H(2)O to eliminate the spectral interference, demonstrated that there existed bulk water at larger ω(0) values (ω(0) was defined as the molar ratio of water to the total surfactant) in the W/IL microemulsion, which had remained unclear before. In addition to the inorganic salts, biomacromolecule laccase could be solubilized in the W/IL microemulsion. The laccase hosted in the microemulsion exhibited a catalytic activity and the activity could be regulated by the composition of the interfacial membrane.     

Effect of the structures of microemulsions on chemical reactions

Two kinds of chemical reactions were studied in two different microemulsion systems: cetyltrimethylammonium bromide/1-butanol/10 and 25% n-octane/water and sodium dodecyl sulfonate/1-butanol/20% styrene/water. One reaction is a hydrolysis reaction, in which aspirin and 2,4-dinitrochlorobenzene were used as the hydrolysis substrates. The second reaction is the polymerization of styrene, which was initiated by using two initiators, water-soluble K₂S₂O₈ and oil-soluble 2,2′-azobis(isobutyronitrile), and, at the same time, the polymerization of acrylamide, which was initiated by NaHSO₃, was also studied. All the hydrolysis reaction experimental results show that the hydrolysis is greatly affected by the structures and the structural transitions of microemulsions. The hydrolysis rates are higher in water-in-oil (W/O) microemulsion media and decrease with the addition of water. The rates increase in bicontinuous (BC) microemulsions and decrease in oil-in-water (O/W) microemulsions. The transition points of the hydrolysis rates occurred at the two microemulsion structural transition points from W/O to BC and from BC to O/W. The polymerization relationships between the conversions of styrene, the molecular weights of polystyrene and the water contents of the microemulsion system were obtained. The effects of microemulsion structures on the sizes of the polystyrene particles and on the molecular weights of the polymers are discussed. Polystyrene particles with diameters of 10–60 nm were observed by microscopy. Our experimental polymerization results show that microemulsions are suitable as media for the production of polymers, the molecular weights and the particle sizes of which can be controlled and predicted by variations in microemulsion structures. Received: 11 July 1999/Accepted: 26 July 1999     

Determination of Hydrophobic Organic Salts by Pseudo-Single-Phase Ion-Pair Titration in an Emulsion Medium

It was shown that hydrophobic organic salts can be determined by pseudo-single-phase ion-par titration in an oil-in-water emulsion stabilized with a nonionic surfactant. Conditions were proposed for determining anionic and cationic surfactants and some hydrophobic salt pharmaceuticals in an emulsion stabilized with Triton X-305 using molybdenum(VI)–Pyrogallol (Bromopyrogallol) Red complexes for the detection of the titration end-point.     

Middle-phase microemulsions of green surfactant alkyl polyglucosides

Microemulsions are important organized molecular assembles in surfactant solutions and are used in various fields such as tertiary oil recovery, pharmaceutics, cosmetics, nanoparticle synthe-sis and chemical engineering. The more commonly used nonionic surfactants to produce micro- emulsions are the ethylene oxide-based compounds (CiEj). In recent years alkyl polyglucosides have been received considerable attention in producing microemulsions[17]. Alkyl polyglucosides (APG), which are widely…     

The aerosol OT+n-butanol+n-heptane+water system: phase behavior, structure characterization, and application to Pt70Fe30 nanoparticle synthesis

A phase diagram of the pseudo-ternary Aerosol OT (AOT)+n-butanol/n-heptane/water system, at a mass ratio of AOT/n-butanol=2, is presented. Conductivity measurements showed that within the vast one-phase microemulsion region observed, the structural transition from water-in-oil to oil-in-water microemulsion occurs continuously without phase separation. This pseudo-ternary system was applied to the synthesis of carbon-supported Pt70Fe30 nanoparticles, and it was found that nanoparticles prepared in microemulsions containing n-butanol have more Fe than those prepared in ternary microemulsions of AOT/n-heptane/water under similar conditions. It was verified that introducing n-butanol as a cosurfactant into the AOT/n-heptane/water system lead to complete reduction of the Fe ions that allowed obtaining alloyed PtFe nanoparticles with the desired composition, without the need of preparing functionalized surfactants and/or the use of inert atmosphere.     

High-impact polystyrene/halloysite nanocomposites prepared by emulsion polymerization using sodium dodecyl sulfate as surfactant

In this work, we report on the phase behavior of 1-ethyl-3-methyl-imidazolium-ethylsulfate ([emim][etSO(4)])/limonene/polyethylene glycol tert-octylphenyl ether (Triton X-114 or TX-114) microemulsions as a function of ionic liquid (IL) content and temperature. Phase diagrams, conductivity measurements, and small angle X-ray scattering (SAXS) experiments will be presented. A hydrophilic IL, instead of water is used with the goal to enlarge the temperature range on which stable microemulsions can be formed. Indeed, the system shows remarkably large temperature stability, in particular down to -35 °C. We will emphasize on a comparison with a recently published work about microemulsions composed of [emim][etSO(4)], limonene, and Triton X-100 that to some extent are stable at temperatures well below the freezing point of water. The key parameter responsible for the difference in phase behavior, microstructure, and temperature stability is the average repeating number of ethylene oxide units in the surfactant head group, which is smaller for Triton X-114 compared to Triton X-100. Among the fundamental interest, how the amphiphilicity of the surfactant influences the phase diagram and phase behavior of IL-based microemulsions, the exchange of Triton X-100 by Triton X-114 results in one main advantage: along the experimental path the temperature where phase segregation occurs is significantly lowered leading to single phase microemulsions that exist at temperatures beneath 0 °C.     

Formation of nanoparticles in water-in-oil microemulsions controlled by the yield of hydrated electron: the controlled reduction of Cu2+

In the water-in-oil (W/O) microemulsions based on nonionic surfactants, i.e., Brij 30, Brij 56, or Triton X-100, the omega value (molar ratio of water to surfactant), anion, and surfactant could remarkably affect the radiolytic reduction of Cu2+ and the morphologies of the reduction products simultaneously. The addition of toluene or naphthalene could transform the reduction products from copper to cuprous oxide in the Brij 56-based microemulsion, and the efficiency of naphthalene was obviously higher than that of toluene. After the effects of pH value and cosurfactant were excluded, it could be concluded that the effects of the omega value, the anion, and the structure of the surfactant on the yield of hydrated electrons (eaq-) play a key role in the radiolytic reduction of Cu2+. It was also suggested that the morphology of the reduction product may be controlled by the yield of eaq-.     

The photoisomerization of <Emphasis Type="Italic">trans</Emphasis>-stilbene in Triton X-100/<Emphasis Type="Italic">n</Emphasis>-C<Subscript>5</Subscript>H<Subscript>11</Subscript>OH/H<Subscript>2</Subscript>O microemulsions

Different from organic solvent, self-assemblies are environment friendly media, and moreover, if they are used as micro-reactor, many meaningful and exciting results may be obtained. In this paper, we investigated the photoisomerization of trans-stilbene in Triton X-100/n-C₅H₁₁OH/H₂O microemulsions (a kind of self-assemblies) with different compositions and structures to establish the relationship between the reaction yields and the compositions and structures of microemulsions. The results show that the yield of cis-stilbene is increased with the increase of water content or with the decrease of Triton X-100 content, and oil in water (O/W) structure is the best structure for this reaction, which makes it possible to decrease the pollution of environment by organic solvent always used in organic reactions.     

The effect of changing the microstructure of a microemulsion on chemical reactivity

A kinetic study was carried out on various solvolytic reactions in water/ NH4OT /isooctane microemulsions. The NH4OT surfactant is a derivative of the sodium salt of bis(2-ethylhexyl) sulfosuccinate (NaOT or AOT), where the Na+ counterion has been replaced by NH4+. The counterion substitution effects the phase diagram of the system, and therefore, NH4OT-based microemulsions with high water content reaching values of W = 350 (W = [H2O]/[NH4OT]) can be obtained. The presence of high W values suggests a transition in the microemulsion microstructure from water-in-oil (w/o) to oil-in-water (o/w), as was confirmed by conductivity and 1H NMR self-diffusion measurements. The interpretation of the kinetic studies in terms of pseudophase formalism allows us to analyze the effect of the microemulsion on chemical reactivity, regardless of its microstructure. It has been confirmed that the values of the solvolytic rate constants at the interphase of oil-in-water microemulsions are similar to those obtained for aqueous SDS systems, showing that the hydration degree of the interphase of the oil-in-water microemulsions is independent of W. The influence of the surfactant counterion on the solvolytic rate constants was analyzed by comparing HOT-, NaOT-, and NH4OT-based microemulsions. An important influence on the rate constants caused by the changes in the structural properties of water has been observed as was confirmed by the water 1H NMR signals.