End‐functionalized polystyrene by ATRP: A facile approach to primary amino and carboxylic acid terminal groups

Monoamino‐terminated and monocarboxylic acid‐terminated polystyrenes containing active halogenated end groups were prepared by atom transfer radical polymerization (ATRP) using the so‐called initiator method and protective group chemistry. α‐Chloropropionates were synthesized and utilized as initiators containing the tert‐butoxycarbonyl (t‐BOC)‐protected amino and the tert‐butyl (t‐Bu)‐protected carboxylic acid function, respectively. Optimum polymerization conditions were attained using CuCl/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (PMDETA) as catalyst and 10 vol % n‐butanol as homogenizing agent at 110 °C. However, targeting larger quantities an alternative route was established employing 50 vol % N,N‐dimethylformamide (DMF). Subsequent hydrolysis of the ω‐tert‐butoxycarbonyl polystyrenes afforded well‐defined polymers with quantitative deprotection of the functional groups. Comparatively, thermolytic cleavage of the protective sites was studied. ¹H NMR verified the quantitative removal of the t‐BOC‐protecting groups. Furthermore, the resulting α‐amino‐ω‐chloro polystyrenes were reacted with Sanger reagent to confirm the existence of the thereby converted primary amino groups. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3845–3859, 2009     

Synthesis and photoinduced deprotection of calixarene derivatives containing certain protective groups

Calixarene derivatives 1a , 1b , and 1c containing pendant tert‐butoxycarbonyl (t‐BOC) groups were synthesized in 81, 93, and 83% yields, respectively, by the reaction of C‐methylcalix[4]resorcinarene (CRA), p‐methylcalix[6]arene (MCA), and p‐tert‐butylcalix[8]arene (BCA) with di‐tert‐butyl dicarbonate using triethylamine as a base in pyridine. Calixarene derivatives 2a , 2b , and 2c containing pendant trimethylsilyl ether (TMSE) groups were obtained in 58, 50, and 82% yields, respectively, by the reaction of CRA, MCA, and BCA with 1,1,1,3,3,3‐hexamethyldisilazane using chlorotrimethylsilane as an accelerator in tetrahydrofuran. Calixarene derivatives 3a , 3b , and 3c containing pendant cyclohexenyl ether (CHE) groups were also prepared in 65, 78, and 84% yields, respectively, by the reaction of CRA, MCA, and BCA with 3‐bromocyclohexene using potassium hydroxide as a base as well as tetrabutylammonium bromide as a phase‐transfer catalyst in N‐methyl‐2‐pyrolidone. The photoinduced deprotection of calixarene derivatives 1a – c was examined with bis‐[4‐(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) as a photoacid generator on UV irradiation followed by heating in the film state, and it was found that the deprotection of the t‐BOC groups of 1a proceeded smoothly in high conversion. The deprotection rates of the t‐BOC groups of 1b and 1c were much lower than that of 1a under the same irradiation conditions. The photoinduced deprotection of calixarenes 2b – c containing tetramethylsilane groups as well as 3a – c containing CHE groups were also examined under similar reaction conditions in the film state, and it was found that the deprotection rates of calixarenes 2b – c and 3a – c were lower than those of the corresponding 1a – c calixarenes. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1481–1494, 2001     

Immobilization of cationic polymer particles having active ester groups onto solid surfaces

Monodispersed cationic polymer particles with sulfonium groups and active ester groups at their surfaces were prepared by emulsifier-free emulsion copolymerization of styrene (ST) with a water-soluble active ester monomer, methacryloyloxyphenyldimethylsulfonium methylsulfate (MAPDS). The cationic polymer particle monolayers were fabricated on unmodified and aminated glass plates by electrostatic interactions and chemical reactions, respectively. The polymer particles were immobilized onto unmodified glass plates at relatively regular intervals in the absence of electrolytes, and the morphology of particle monolayers on the glass plates was changed with solid content of latex, electrolyte and cationic surfactant concentration. The polymer particles were immobilized onto aminated glass plate as aggregates by controlling the pH of latex and electrolyte concentration. Remaining active ester groups of the particle monolayers were confirmed to react easily with primary amino compounds.     

Cu(111)与Cu(110)上水煤气变换反应的微观动力学分析及Monte Carlo模拟

通过对Cu(111)与Cu(110)晶面上水煤气变换反应中基元步骤动力学参数的计算及表面氧化还原机理的Monte Carlo模拟,发现该反应为结构敏感反应,其表观活化能强烈地依赖于催化剂的表面结构,从而在一定程度上从分子水平阐明了催化剂表面结构对反应活性的影响.     

Simultaneous tailoring of surface topography and chemical structure for controlled wettability

Wettability was controlled in a rational manner by individually and simultaneously manipulating surface topography and surface chemical structure. The first stage of this research involved the adsorption of charged submicrometer polystyrene latex particles to oppositely charged poly(ethylene terephthalate) (PET) film samples to form surfaces with different topographies/roughness; adsorption time, solution pH, solution ionic strength, latex particle size, and substrate charge density are external variables that were controlled. The introduction of discrete functional groups to smooth and rough surfaces through organic transformations was carried out in the second stage. Amine groups (-NH(2)) and alcohol groups (-OH) were introduced onto smooth PET surfaces by amidation with poly(allylamine) and adsorption with poly(vinyl alcohol) (PVOH), respectively. On latex particle adsorbed surfaces, a thin layer of gold was evaporated first to prevent particle redistribution before chemical transformation. Reactions with functionalized thiols and adsorption with PVOH on patterned gold surfaces successfully enhanced surface hydrophobicity and hydrophilicity. Particle size and biomodal particle size distribution affect both hydrophobicity and hydrophilicity. A very hydrophobic surface exhibiting water contact angles of 150 degrees /126 degrees (theta(A)/theta(R)) prepared by adsorption of 1-octadecanethiol and a hydrophilic surface with water contact angles of 18 degrees /8 degrees (theta(A)/theta(R)) prepared by adsorption of PVOH were prepared on gold-coated surfaces containing both 0.35 and 0.1 microm latex particles. The combination of surface topography and surface-chemical functionality permits wettability control over a wide range.     

Cryo-SEM studies of latex/ceramic nanoparticle coating microstructure development

Cryogenic scanning electron microscopy (cryo-SEM) was used to investigate microstructure development of composite coatings prepared from dispersions of antimony-doped tin oxide (ATO) nanoparticles (approximately 30 nm) or indium tin oxide (ITO) nanoparticles (approximately 40 nm) and latex particles (polydisperse, D(v): approximately 300 nm). Cryo-SEM images of ATO/latex dispersions as-frozen show small clusters of ATO and individual latex particles homogeneously distribute in a frozen water matrix. In contrast, cryo-SEM images of ITO/latex dispersions as-frozen show ITO particles adsorb onto latex particle surfaces. Electrostatic repulsion between negatively charged ATO and negatively charged latex particles stabilizes the ATO/latex dispersion, whereas in ITO/latex dispersion, positively charged ITO particles are attracted onto surfaces of negatively charged latex particles. These results are consistent with calculations of interaction potentials from past research. Cryo-SEM images of frozen and fractured coatings reveal that both ceramic nanoparticles and latex become more concentrated as drying proceeds; larger latex particles consolidate with ceramic nanoparticles in the interstitial spaces. With more drying, compaction flattens the latex-latex particle contacts and shrinks the voids between them. Thus, ceramic nanoparticles are forced to pack closely in the interstitial spaces, forming an interconnected network. Finally, latex particles partially coalesce at their flattened contacts, thereby yielding a coherent coating. The research reveals how nanoparticles segregate and interconnect among latex particles during drying.     

Controlling deposition and release of polyol-stabilized latex on boronic acid-derivatized cellulose

Poly(glycerol monomethacrylate)-stabilized polystyrene (PGMA-PS) latex particles undergo specific, pH-dependent adsorption onto regenerated cellulose film bearing surface phenylboronic acid groups (cellulose-PBA). Deposition occurs at pH 10 and is driven by the boronate ester formation with the polyol latex surface coating. In contrast, no deposition occurs at pH 4, and previously deposited particles can be readily desorbed at this lower pH. In control experiments, conventional anionic sulfate-stabilized polystyrene latex did not deposit onto the hydrophilic cellulose surface. The distribution of boronate groups in the cellulose was determined by exposure to Alizarin Red S dye, which forms a fluorescent complex with phenylboronic acid; confocal microscopy was used to determine a surface density of 3 nm(2) per boronic acid group on the cellulose surface. Although the boronic acid binding constant with PGMA is relatively low (5.4 L/mol), the cooperative interactions between multiple PBA surface sites and the many PGMA chains per latex particle are sufficient to induce specific latex adsorption, providing a convenient new tool for controlling nanoparticle deposition on surfaces.     

核壳结构聚丙烯酸酯抗冲改性剂的合成及粒径控制

采用预乳化多步种子乳液聚合法合成聚丙烯酸酯类聚合物(ACR)胶乳,实验得出种子乳液用量与聚丙烯酸丁酯粒径之间的关系,实现对胶乳粒子粒径的控制;对反应中影响粒子粒径的因素做了分析,以此确定最佳反应条件为:温度为65℃;乳化剂:十二烷基硫酸钠和聚氧乙烯基醚硫酸钠摩尔比为4/3,乳化剂用量为0.9％,单体固含量30％～37％...     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

Interdiffusion of polymer chains during latex coating

The fluorescence method was used to study the interdiffusion of polymer chains during annealing of latex above its glass transition temperature (T_g). The latex film was prepared from mixture of naphthalene (N) (donor) and pyrene (P) (acceptor)-labeled poly(methyl methacrylate) (PMMA) latex particles. Heptane was used as the coalescent agent. A steady-state fluorescence technique was employed to measure the amount of direct nonradiative energy transfer from N to P during the interdiffusion of polymer chains across the particle–particle junction. Various latex films with different latex contents were used to measure the percentage critical occupation for the reliable steady-state fluorescence measurements. Diffusions activation energies in these latex films were measured and found to be around 30 kcal/mol, which was attributed to the backbone motion of PMMA chains.     

Effect of hydrophilic comonomer and surfactant type on the colloidal stability and size distribution of carboxyl- and amino-functionalized polystyrene particles prepared by miniemulsion polymerization

Carboxyl and amino-functionalized polystyrene latex particles were synthesized by the miniemulsion copolymerization of styrene and acrylic acid or 2-aminoethyl methacrylate hydrochloride (AEMH). The reaction was started by using an oil-soluble initiator, such as 2,2'-azobis(2-methylbutyronitrile) (V-59). The effect of the functional monomer content and type of surfactant (non-ionic versus ionic) on the particle size and particle size distribution was investigated by dynamic light scattering (DLS) and transmission electron microscopy (TEM). A bimodal particle size distribution was observed for functionalized latex particles prepared in the presence of the non-ionic surfactant (i.e., Lutensol AT-50) when 1 wt % of acrylic acid or 3 wt % of AEMH as a comonomer was employed. The copolymer particle nucleation was studied by using a highly hydrophobic fluorescent dye. From the obtained results, the formation of bimodal particle size distribution may be attributed to a budding-like effect, which takes place during the earlier stage of polymerization and is caused by the additional stabilizing energy originated from the ionic groups of a functional polymer. The reaction mechanism of particle formation in the presence of non-ionic and ionic surfactants has been proposed. The amount of the surface functional groups was determined from polyelectrolyte titration data.     

Investigation of Cationic Soapless P(St-co-DMAEMA) Latex and Its Electrostatic Adsorption of Laponite

Cationic poly(styrene-co-N,N-dimethylaminoethyl methacrylate)(P(St-co-DMAEMA)) latexes were prepared in the absence of surfactant by using 2,2'-azobis(2-methylpropionamidine) dihydrochloride(AIBA) as the initiator. The effects of the AIBA concentration, HCl/DMAEMA molar ratio and DMAEMA amount on the emulsion polymerization and the latex properties were investigated. The particle morphology and size, the zeta potential and the amino distribution of the P(Stco-DMAEMA) latexes were characterized by transmission electron microscope(TEM), dynamic light scattering(DLS) and conductometric titration, respectively. Results showed that the emulsion polymerization performed smoothly with high monomer conversion and narrow particle size distribution under the optimized conditions with AIBA concentration of1 wt%, HCl/DMAEMA molar ratio of 1.2 and DMAEMA content of 5 wt%. The diameter of the dried latex particles decreased and the density of amino groups on the particle surfaces increased with increasing the DMAEMA content. The zeta potential of the P(St-co-DMAEMA) latexes was p H-dependent and the zero point was around at p H 7.2. A facile method was developed to fabricate P(St-co-DMAEMA)/laponite hybrid nanoparticles via electrostatic adsorption, in which the loading capacity of laponite platelets reached 17.7 wt%, and the resultant hybrid nanoparticles showed good thermal stability.     

Synthesis of silanol-functionalized latex nanoparticles through miniemulsion copolymerization of styrene and gamma-methacryloxypropyltrimethoxysilane

The polystyrene latex nanoparticles bearing silanol groups on their surfaces were successfully synthesized via miniemulsion polymerization using gamma-methacryloxypropyltrimethoxysilane (MPS) as the functional comonomer and oil-soluble AIBN as the initiator at neutral conditions. FTIR and 29Si NMR spectra showed that the condensation of silanol groups was suppressed effectively. zeta potential and XPS analyses demonstrated that the silanol groups were enriched at the surfaces of the latex particles and could be tailored by MPS concentration. These silanol-functionalized latex particles could be easily coated with silica or other inorganic or organic compounds to prepare novel hybrid particles and hollow microspheres.     

Nano-matrix structure formed by graft-copolymerization of styrene onto natural rubber

Nano-matrix structure was formed by graft-copolymerization of styrene onto urea-deproteinized natural rubber (U-DPNR) latex. The grafted U-DPNR was characterized by FT-IR spectroscopy, ¹H NMR spectroscopy and transmission electron microscopy. Conversion and grafting efficiency of styrene were more than 90% under the best condition of the graft-copolymerization. In transmission electron micrograph of film specimen stained by OsO₄, it was found that natural rubber particle of about 0.5 μm in diameter was dispersed in polystyrene matrix of about 15 nm in thickness. The conversion and grafting efficiency for the grafted U-DPNR were compared with those for a control sample prepared from enzymatic deproteinized natural rubber (E-DPNR) with styrene.     

Synthesis and characterization of a novel silane-based vinylic monomer and its application in the multilayer core-shell latex

A novel monomer methacrylamidophenoxy dimethylsiloxy phenylphthalimide was obtained by a reaction of 4,4′-bis-aminophenoxy dimethylsilane, phthalic anhydride and methacryloyl chloride. Then it has been used in the synthesis of phase-separated polymer latex with a multilayer core-shell morphology by surface cross-linking emulsion polymerization. Poly(butyl acrylate) was used for the seed and the core of the latex, the inner shell was poly(butyl acrylate/styrene) cross-linked with divinylbenzene to avoid phase inversion, and the poly(methyl methacrylate/butyl acrylate/methacrylamidophenoxy dimethylsiloxy phenylphthalimide) was the outer shell. The structural elucidation of monomer was carried out by elemental analysis, FTIR, ¹H NMR, and ¹³C NMR spectroscopic techniques. The morphology and glass transition temperatures of the synthesized product were investigated by transmission electron microscopy and differential scanning calorimetry, respectively. The multilayer core-shell structure was clearly shown in TEM micrographs, and the three-phase separation was confirmed by DSC analysis. The obtained results demonstrated that the average particle size is 81.8, 108 and 132 nm for the core, core-shell and multilayer core-shell particles, which agrees with the TEM micrograph measurement of 75, 103, and 131 nm, respectively.     

Batch and semicontinuous emulsion copolymerization of vinyl acetat–butyl acrylate. I. Bulk,surface, and colloidal properties of copolymer latexes

Vinyl acetate (VAc)–butyl acrylate (BuA) comonomer mixtures with various composition were polymerized by batch and semicontinuous emulsion polymerization processes. PVAc and PBuA homopolymer latexes as well as the (VAc-BuA) copolymer latexes were characterized with respect to particle size, molecular weight, acid end groups on particle surfaces, and colloidal stability against electrolytes. The surface and colloidal properties of these latexes were also compared before and after aging and acid hydrolysis. The average particle size of batch latexes was independent of copolymer composition, whereas for semicontinuous latexes it decreased with increasing BuA content and was always lower than that of the corresponding batch latex. The molecular weight distribution (MWD) for batch latexes was narrower and much less dependent on composition than that of the semicontinuous latexes; bimodal MWD was found in most semicontinuous latexes with a substantial amount of low MW fraction. The total weak and strong acid end groups on particle surfaces for semicontinuous latexes is higher, and more dependent on composition, than the batch latexes. Acid-induced hydrolysis results in a drastic change in the type and concentration of the surface groups of the semicontinuous latex particles. Colloidal stability against electrolytes showed that both electrostatic (due to surface acid groups) and steric [due to surface poly(vinyl alcohol)] mechanisms are contributing. However, for semicontinuous latexes, increasing PVAc content above 50 mol % resulted in a proportional increase and ultimately dominant role of steric stabilization. The results were interpreted in terms of differences in reactivity ratios and water solubilities of the two monomers and their effects on the locus of initiation and growth in the two polymerization processes, as well as the monomer sequence within the polymer chain and degree of homogeniety of the copolymer composition within the particle.     

Mechanism of emulsion polymerization of styrene in soap-free systems

The formation and growth of monodisperse polystyrene latex particles in the absence of added surfactant has been studied by sampling polymerization reactions at different times and determining the surface and bulk properties of the latex. A large number of nuclei in excess of 5 × 10¹²/ml were generated during the first minute of reaction, but this fell due to coagulation until a constant number (10¹¹?10¹²/ml) was reached. The rate of polymerization per particle was then found to be proportional to the particle radius. Gel-permeation chromatography has shown that the initial particles consist mainly of material of MW 1000 with a small amount of polymer up to MW 10⁶, and the presence of this low molecular weight polymer, which in many cases can still be detected after 100% conversion, is taken as being indicative of particle formation via a micellization-type mechanism involving short-chain (MW 500) free-radical oligomers. M?_n values determined for the latex particles throughout the course of reactions show that the molecular weight increases to a maximum of about 10⁵ as the particles grow. The presence of anomalous regions within the particles has been confirmed by transmission electron microscopy, scanning electron microscopy, and gas adsorption studies. It has also been found possible to re-expose these regions within apparently homogeneous particles by stirring with styrene monomer; this is indicative of a molecular weight heterogeneity within the latex particles. The presence of sulfate, carboxyl, and hydroxyl groups upon the latex particle surfaces has been determined by conductometric titration.     

Preparation and characterization of emulsifier-free core–shell interpenetrating polymer network-fluorinated polyacrylate latex particles

The emulsifier-free core–shell interpenetrating polymer network (IPN) fluorinated polyacrylate latex particles with fluorine rich in shell were prepared by emulsifier-free seeded emulsion polymerization with water as the reaction medium. The fluorinated copolymer could be fixed on the particle surface due to the formation of interpenetrating polymer network. The resultant core–shell particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS) analysis, Fourier transform infrared (FTIR) spectrometry, X-ray photoelectron spectroscopy (XPS) analysis and thermogravimetric analysis (TGA). The core–shell particles possessed very narrow monomodal particle size distributions. XPS analysis of the latex film displayed that perfluoroalkyl groups had the tendency to enrich at surface and there was a gradient concentration of fluorine in the structure of the latex film from the film–air interface to the film–glass interface. In addition, compared with the latex film of crosslinked polyacrylate prepared under the same condition, the emulsifier-free core–shell IPN-fluorinated polyacrylate latex film showed better thermal stability, higher contact angle and lower water uptake.     

Healing and photon diffusion during sintering of high-T latex particles

A steady-state fluorescence technique was used to examine the annealing of films formed from high-T latex particles above the glass transition temperature. The films were prepared by sintering pyrene-labeled poly(methyl methacrylate) latex particles. During the annealing processes, the transparency of the film changed considerably. Direct fluorescence emission from excited pyrene was monitored as a function of annealing temperature to detect these changes. Scanning electron microscopy in conjunction with Monte Carlo simulations of photon diffusion in latex film were used to interpret the fluorescence results. Healing temperature and time were measured at the point where the fluorescence emission intensity becomes maximum. This was associated with the longest optical path of a photon in latex film during healing of particle(SINGLEBOND)particle boundaries. Healing activation energy was measured and found to be 10 kcal/mol. © 1996 John Wiley & Sons, Inc.     

30%亚硫酸氢钠溶液样品中Cl-和SO2-4的同时测定

建立了采用离子色谱测定30%亚硫酸氢钠溶液样品中的氯化钠和硫酸钠含量的新方法。采用IonPac AS14分析柱,选择三乙醇胺为亚硫酸氢钠的稳定剂,以丙酮为有机改进剂,淋洗液组成为1.5 mol/L Na2CO3-3.5 mol/L NaHCO3-10% （体积分数）(CH3)2CO,流速为1.0 mL/min,抑制电导检测。实验结果表明,氯离子、硫酸根离子分别在0.05~1.5 mg/L,0.20~15 mg/L时,其峰面积与质量浓度呈线性关系,相关系数均大于0.999,检出限分别为0.01 mg/L和0.03 mg/L。该法用于实际样品分析,操作便捷,结果可靠。