高磺化度聚苯胺体系中的分形结构研究

通过透射电镜的观察研究发现磺化聚苯胺的胶体聚集体和胶粒内部结构都具有分形体的特征 ,从而将分形的概念及其数学模型引入共轭导电聚合物体系之中 .磺化聚苯胺胶体的聚集体为很不均匀的分支状开放结构 ,其形成过程可用扩散控制集团聚集模型 (DLCA)进行模拟 ,计算机模拟生成的图形及其分形维数都与实验观测结果相当吻合 .胶粒由于是在分散介质所形成的平均化场中生成 ,屏蔽效应减弱 ,是比由它组成的聚集体要致密的球形结构 ,该结构的生成可用随机雨点模型模拟且结果相近 .     

Probing of porphyrin surface chemistry in systems with laser-ablated Ag nanoparticle hydrosol: role of thiosulfate anions

The influence of sodium thiosulfate (THS) concentration in Ag colloid/THS/H(2)TMPyP and Ag colloid/H2TMPyP/THS systems (H2TMPyP = 5,10,15,20-tetrakis(1-methyl-4-pyridyl)porphyrin) was investigated by a combination of surface-enhanced resonance Raman scattering (SERRS) spectroscopy, surface plasmon extinction (SPE) measurements, and transmission electron microscopy (TEM). THS was found to have a strong impact on Ag nanoparticle surface structure and aggregation state and on interaction with H2TMPyP probe molecules, as evidenced by variations of the SERRS spectrum. In the Ag colloid/THS/H2TMPyP system, when laser-ablated Ag colloid was THS pretreated prior to the porphyrin addition, a critical threshold THS concentration (4 x 10(-5) M) was discovered. At concentrations below the threshold, THS mainly reduces the number of Ag+ adsorption sites. This leads to increased Ag nanoparticle aggregation prior to the porphyrin addition and significant weakening of the overall SERRS signal. Dominant contributions in the SERRS spectrum correspond to free base H2TMPyP and Ag+ containing the AgTMPyP form. At concentrations above the threshold, THS mediates also the formation and stabilization of new adsorption sites, probably Ag(0) sites. This induces a turn in the aggregation state of the pretreated Ag-c/THS system, an increase of the overall SERRS signal, and the appearance of a new spectral form of Ag metalated porphyrin.     

Correlation of optical properties with structure of immobilised nanoparticles--a method for probing the mechanism of SERRS

A combined surface enhanced resonance Raman scattering (SERRS) and transmission electron microscopy (TEM) method has been developed allowing the same immobilised nanoparticles to be reliably located and studied by both techniques. The method allows large numbers of particles to be analysed by each technique relatively simply and the distribution of Raman enhancement between particles and clusters, as well as the relationship between particle microstructure and Raman enhancement, to be investigated. In addition, the effect of chemical and laser damage on the dye on the surface of the particles and the effect on the particles can be systematically investigated. These effects can cause time dependence fluctuations in Raman signals which could be confused with "blinking" from single molecules. Conditions were identified to enable Raman scattering to be detected without photodegradation to either the analyte molecules or the particles. Measurement outside this range gave rise to alterations in the spectra and to loss of signal. The extent of the damage to the analyte/particle if these conditions are not adhered to gives rise for concern about interpretation of changes in spectra observed unless an attempt is made to assess the limits of the conditions which can be applied before photodegradation or sample drying occurs. The method developed will enable reliable and systematic studies of the enhancement obtained from immobilised single particles by enabling the full power of high resolution TEM to be utilised to aid the development of a reliable SERRS theory.     

HA/PDM自组装复合胶体粒子及其乳化性能

以阴离子天然大分子透明质酸(HA)和阳离子单体甲基丙烯酸二甲氨基乙酯(DM)组成带相反电荷的聚合物/单体复合体系, DM通过水相原位聚合可制备荷正电的聚甲基丙烯酸二甲氨基乙酯(PDM), PDM与HA间的静电作用可诱导两者在水溶液中进行自组装, 得到HA/PDM复合胶体粒子. 用傅里叶变换红外(FTIR)光谱仪对HA/PDM复合物结构进行了表征. 用动态激光光散射(DLS)研究了HA与PDM复合体系在水溶液中的自组装行为, 并表征了反应时间对HA/PDM复合胶体粒子粒径的影响. 利用透射电镜(TEM)表征了胶体粒子的形貌. 考察了溶液pH 对胶体粒子粒径及zeta 电位的影响, 并对胶体粒子的乳化性能进行初步探索. 结果表明:DM单体聚合前, 无HA/DM复合物聚集体形成; 而随着DM的逐步聚合, HA与PDM可通过静电作用逐渐组装形成球状HA/PDM复合胶体粒子, 其粒径随反应时间延长逐渐减小并趋于稳定. 同时, 该复合胶体粒子具有pH敏感性和乳化性, 乳化性能较纯HA和PDM有较大提高.     

Structure of hybrid colloid-polymer xerogels

Crack-free monolithic gels were prepared from different mixtures of colloidal silica with a sol solution containing tetraethoxysilane, under powerful ultrasonic agitation (sonosol). Recently, information on the structure of these gels, inferred from N2 adsorption and mercury intrusion porosimetry, was presented. In the present paper, these data were used to construct structural models of the gels using Monte Carlo calculations on the basis of random close packing (RPC) premises. In addition, the structure of gels under study was investigated by transmission and scanning electron microscopy. The material can be described as a composite in which the sonogel is the matrix and the colloid particles the reinforcing phase. For low colloid content, the colloid forms discrete clusters, and the main structural characteristic of sonogels, i.e., a network of uniformly sized particles of approximately 3-4-nm radius, remains unmodified. However, for high colloid silica content, a multimode distribution appears, the structure is discontinuous, and only colloid aggregates larger than 100 nm are observed. For medium colloid content, aggregates of approximately 50-100 nm can be seen, but the sonogel structure extends throughout the whole material. By the processing method and election of a suitable precursor concentration, it is possible to design the composite for specific purposes.     

Surface-enhanced resonance Raman scattering and background light emission coupled with plasmon of single Ag nanoaggregates

We investigated the optical properties of isolated single aggregates of Ag nanoparticles (Ag nanoaggregates) on which rhodamine 6G molecules were adsorbed to reveal experimentally a correlation among plasmon resonance Rayleigh scattering, surface-enhanced resonance Raman scattering (SERRS), and its background light emission. From the lack of excitation-laser energy dependence of background emission maxima we concluded that the background emission is luminescence, not Raman scattering. The polarization dependence of both SERRS and background emission was the same as that of the lowest-energy plasmon resonance maxima, which is associated with a longitudinal plasmon. From the common polarization dependence, we identified that the lowest-energy plasmon is coupled with both SERRS and background emission. In addition, we revealed that the lowest-energy plasmon with a higher quality factor (Q factor) yields larger SERRS and background emission intensity. Also, we identified that the Q factor dependence of the SERRS intensity was similar to that of the background emission intensity. This similarity directly supported us to demonstrate an enhancement of both SERRS and background emission by coupling with a common plasmon radiative mode.     

Synthesis and optical property of beta-brass colloid

Cu/Zn beta-phase alloy (beta-brass) colloid was successfully synthesized by reducing the organometallic complexes in the organic liquid phase. It was confirmed by X-ray diffraction that the material formed pure beta-phase. The morphology for the beta-brass particles was observed using transmission electron microscopy (TEM). The dispersion of the particle diameter was almost single modal, and the diameter was estimated at 8+/-2 nm. A clear peak around 520 nm was seen in the optical absorption spectrum for the beta-brass colloid, and it is attributed to the surface plasmon absorption. We also simulated the optical absorption spectrum using the bulk dielectric constant for beta-brass. The simulation qualitatively reproduced the experimental data well.     

PS胶体粒子表面逐层自组装固定化SOD及其生物活性

通过逐层自组装技术成功地把超氧化物歧化酶(SOD)吸附在聚苯乙烯(PS)胶体粒子表面.zeta电位和TEM证明了聚阳离子或聚阴离子型SOD与相反电荷的聚电解质在PS胶体粒子表面的交替吸附.通过测定SOD被胶体粒子吸附后上清液的生物活性,得到聚阴离子型SOD(pH=8.0)和聚阳离子型SOD(pH=4.3)在PS胶体粒子表面的吸附量分别为12和51IU,相对活性分别为23.4%和2.9%.聚阴离子型SOD在PS胶体粒子表面能形成平滑规整的膜,导致较高的相对活性.研究结果表明,通过调节pH值,可以优化自组装固定化酶的聚集状态和生物活性     

SAXS and TEM Investigations on Thermoplastic Nanocomposites Containing Functionalized Silica Nanoparticles

Transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS) were used to characterize the morphology of thermoplastic nanocomposites. These materials were based on a thermoplastic matrix of a copolymer of methylmethacrylate (MMA) and 2-hydroxyethylmethacrylate (HEMA) with spherical 10 nm silica particles as a filler (filler content 2, 5 and 10 vol%, respectively). Depending on the surface modification of the particles, it was possible to control the aggregation tendency of the primary filler particles. With uncoated particles large aggregates about 100 nm in size could be observed by TEM. For nanocomposites containing particles coated with methacryloxypropyltrimethoxysilane (MPTS), TEM showed that the particles were better dispersed in the polymer matrix only forming aggregates comprised of two or three primary particles. In comparison to the TEM results, the volume weighted particle size distribution calculated from SAXS for the systems with uncoated particles is monomodal and shows particle sizes in the range of primary particles whereas the systems with MPTS coated particles revealed a bimodal size distribution with particle sizes comparable to those measured with TEM. To obtain complete information about the morphology of the nanocomposites above the critical upper limit of detectable scattering vectors (particle sizes >50 nm) SAXS has to be supported by TEM, whereas in the nanosize range below the critical limit both methods exhibit an excellent correspondence.     

Magneto-Optical Effects in Colloidal Solutions of Barium Hexaferrite

Hydrothermal synthesis was used to obtain lamellar magnetic particles of barium hexaferrite, and colloidal solutions were prepared on their basis. Magneto-optical effects in colloid solutions of barium hexaferrite were examined. It was found that the aqueous colloidal solution of coarse planar particles of barium hexaferrite is a magneto-optical medium that is nearly two orders of magnitude more effective than the colloid formed from isometric cobalt ferrite particles. It was shown that measuring the frequency dependence of the magneto-optical effects and approximating the experimental data with the Debye function makes it possible to find the frequency f₀ characteristic of the given colloid and to calculate the characteristic size of particles (or aggregates) creating the optical anisotropy in the colloid under the action of a magnetic field. A dichroism is observed in the aqueous colloid formed by coarse planar barium hexaferrite particles. This phenomenon is due to the change in the light scattering on coarse particles upon their orientation by a magnetic field.     

Observation of dynamic oxygen release in hemoglobin using surface enhanced Raman scattering

Photoinduced oxygen dynamics in hemoglobin is monitored by surface enhanced resonant Raman spectroscopy (SERRS) using silver colloids. The spectra are characterized by massive transient amplifications which we assign to a charge-transfer mechanism during the opening of the heme-pockets in the release of oxygen. This transient lifts the selection rule specificity of normal Raman active modes and allows for the full density of states of the hemes to be observed. The amplification of specific forbidden modes is controlled by the orientation alignment of individual molecules in proximity with the colloid surface. We propose that the technique can be used to monitor oxygen release in single proteins.     

Mechanism of mesoporous silica formation. A time-resolved NMR and TEM study of silica-block copolymer aggregation

The dynamics of the synthesis of a mesoporous silica material SBA-15 is followed using time-resolved in situ 1H NMR and transmission electron microscopy (TEM). Block copolymer-silica particles of two-dimensional hexagonal symmetry evolve from an initially micellar solution. The synthesis was carried out with the block copolymer Pluronic P123 (EO20-PO70-EO20) at 35 degrees C and using tetramethyl orthosilicate as the silica precursor. By using TEM, we can image different stages during the evolution of the synthesis. Flocs of spherical micelles held together by the polymerizing silica are observed prior to precipitation. With time, the structure of these flocs evolves and the transition from spherical to cylindrical hexagonally packed micelles can be monitored. The signal from the methyl protons of the PO part was recorded with 1H NMR. One observes a continuous increase in the signal width but with distinct changes in the spectral characteristics occurring in narrow time intervals. The spectral changes can be attributed to structural changes of the self-assembled aggregates. The 1H NMR and TEM studies reveal the same mechanism of formation. It is concluded that the aggregation is caused by a micelle-micelle attraction induced by oligomeric/polymeric silica that adsorbs to the EO palisade layer of the micelles and has the ability to bridge to another micelle. This adsorption also favors the formation of cylindrical aggregates relative to spherical micelles. The sequence of NMR and TEM observations can then be interpreted as the following sequence of events: (i) silicate adsorption on globular micelles possibly accompanied with some aggregate growth, (ii) the association of these globular micelles into flocs, (iii) the precipitation of these flocs, and (iv) micelle-micelle coalescence generating (semi)infinite cylinders that form the two-dimensional hexagonal packing.     

末端含C_(60)单链窄分子量分布高分子在溶液中的自组装行为

C60做为碳笼烯家族的代表,由于它独特的物理化学性能而引起人们广泛的兴趣[1].然而,它较差的溶解性和加工性能限制了其实际应用.将C60引入高分子可将C60不同寻常的物理化学性能与高分子良好的力学、溶解及加工性能结合起来的一种有效方法.自从大规模制备C60的方法出现后,已有大量关于合成各种高分子化C60的报道[2～6].通过化学修饰的方法将C60结合到高分子中的主要研究目是改进C60的溶解性及加工性能.     

Interfacing capillary electrophoresis and surface-enhanced resonance Raman spectroscopy for the determination of dye compounds

The at-line coupling of capillary electrophoresis (CE) and surface-enhanced resonance Raman spectroscopy (SERRS) was optimized for the separation and subsequent spectroscopic identification of charged analytes (dye compounds). Raman spectra were recorded following deposition of the electropherogram onto a moving substrate. To this end a new interface was developed using a stainless steel needle as a (grounded) cathode. The outlet end of the CE capillary was inserted into this metal needle; CE buffer touching the needle tip served as the electrical connection for the CE separation. A translation table was used to move the TLC plate at a constant speed during the deposition. The distance between the tip of the fused silica column and the TLC plate was kept as small as possible in order to establish a constant bridge-flow, while avoiding direct contact. The dyes Basic Red 9 (BR9), Acid Orange 7 (AO7) and Food Yellow 3 (FY3) were used as test compounds. After CE separation in a 20 mM borate buffer at pH 10, after deposition, concentrated silver colloid was added to each analyte spot, followed by irradiation with 514.5 nm light from an argon ion laser to record the SERRS signal using a Raman microscope. Different types of silver colloids were tested: Lee–Meisel type (citrate), borate, and gold-coated silver. BR9 (positively charged) gave much more intense SERRS spectra than the two negatively charged dyes. For BR9 and AO7 the citrate-coated Lee–Meisel colloid yielded the most intense SERRS spectra. The CE–SERRS system was used to separate and detect the negatively charged dyes. Silver colloid and nitric acid (to improve adsorption) were added post-deposition. Even though their chemical structures are very similar, AO7 and FY3 could be readily distinguished based on their SERRS spectra. The limits of detection (S/N=3) of the CE–SERRS system ranged from 6.7×10^–5 M (2.6×10^–12 mol injected) for FY3 down to 1.8×10^–6 M (7.0×10^–14 mol injected) for BR9.D. Arráez Román and E. Efremov contributed equally to this work.     

Elucidation of interaction between metal-free tetraphenylporphine and surface Ag atoms through temporal fluctuation of surface-enhanced resonance Raman scattering and background-light emission

We have observed simultaneously temporal fluctuation of surface-enhanced resonance Raman scattering (SERRS) and its background-light emission from single Ag nanoaggregates that were adsorbed with metal-free tetraphenylporphine (H(2)TPP) molecules. We found that temporally stable SERRS spectra showed clearly a SERRS band that is attributed to a stretching mode of a chemical bond between a carbon atom and a non-hydrogenated nitrogen atom (C(alpha)-N). This stretching mode was not observed in regular resonance Raman spectra which are free from surface enhancement. On the other hand, we also found that temporally unstable SERRS spectra did not clearly show a C(alpha)-N stretching mode in SERRS bands. Furthermore, temporally stable SERRS spectra were accompanied by temporally stable background-light emission. Kobayashi et al. [J. Phys. Chem. 1985, 89, 5174] reported that formation of an Ag-N bond between surface Ag atoms and non-hydrogenated N atoms in a pyrrole ring enhances the intensity of a C(alpha)-N stretching mode. Thus, the observed relationship between clear appearance of a C(alpha)-N stretching mode and temporal stability of SERRS plus background-light emission strongly suggests that formation of a stable Ag-N bond suppresses fluctuation of both SERRS and background-light emission. Furthermore, the observed relationship implies that chemical contribution to SERRS is stabilization of H(2)TPP molecules that are adsorbed on SERRS-active sites by formation of Ag-N bonds. Additionally, we attributed background-light emission to luminescence of complexes between H(2)TPP molecules and surface Ag atoms considering possible formation of Ag-N bonds, synchronized SERRS intensity with background-light emission intensity, blue-shifted background-light emission maxima from normal fluorescence maxima, and previous reports related to electronic structures of H(2)TPP molecules on Ag surfaces.     

Immunoassay utilizing biochemistry reaction product via surface-enhanced Raman scattering in near field

In recent years, surface-enhanced Raman scattering (SERS) has been a topic of keen interest with regard to the detection of trace biological materials[1―8]. A wide range of SERS studies aimed at investigating structure, topology, and composition of biome…     

Self-assembly of silver nanoparticles: synthesis, stabilization, optical properties, and application in surface-enhanced Raman scattering

Silver nanoparticle aggregates were synthesized in large scale using resorcinol under alkaline condition to obtain an assembly of silver clusters. Stable dispersion of the cluster in aqueous medium has been examined out of resorcinol-capped silver nanoparticle assemblies. The UV-vis spectroscopy during the particle evolution has been studied in detail. From the high-resolution TEM (HRTEM) image and XRD pattern it was confirmed that the particles are made of pure silver only. The capping action of resorcinol has been authenticated from the FTIR spectra. UV-vis spectroscopy and TEM images reveal that the temperature, effect of vibrational energy, heat shock, and time-dependent particle evolution have unique bearing on the stability and surface properties of the clusters. The concentrations of silver nitrate, resorcinol, and NaOH have important influence on the particle evolution and its size. TEM images incite us to examine the aggregates to capitulate surface-enhanced Raman scattering (SERS) to the single molecular level using crystal violet (CV) and cresyl fast violet (CFV) as molecular probes. The SERS intensity of CV increases with increasing the size of the silver aggregate.     

光敏共聚物P(St/VM-co-MA)自组装胶体粒子及其性能

以苯乙烯类光敏单体7-(4-乙烯基苄氧基)-4-甲基香豆素(VM)、苯乙烯(St)、马来酸酐(MA)为共聚单体,采用自由基聚合法制备了光敏性双亲共聚物P(St/VM-co-MA).在选择性溶剂(N,N-二甲基甲酰胺(DMF)/H2O)中对P(St/VM-co-MA)进行自组装,用透射电镜(TEM)和动态激光光散射(DLS)表征了自组装胶体粒子的形态、粒径大小及其分布.利用紫外光照使胶体粒子中香豆素基元发生光二聚反应,形成交联胶体粒子,并用紫外-可见光分光光度计(UV-Vis)跟踪其交联过程.用DLS研究了交联和未经交联胶体粒子的粒径和结构稳定性,用激光扫描共聚焦显微镜(LSCM)和光学显微镜考察了胶体粒子的乳化、包覆性能.结果表明:交联和未经交联胶体粒子均具有乳化性,且在乳化过程中可实现对油溶性染料的包覆.胶体粒子交联后,粒径有所减小,结构稳定性、乳化性能、包覆性能均有所提高.     

Synthesis of PS and PDMAEMA mixed polymer brushes on the surface of layered silicate and their application in pickering suspension polymerization

An ammonium free radical initiator was ion exchanged onto the surface of clay layers. Polystyrene (PS) and poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) mixed polymer brushes on the surface of clay layers were prepared by in situ free radical polymerization. PS colloid particles armored by clay layers with mixed polymer brushes were prepared by Pickering suspension polymerization. Transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the colloid particles. Clay layers on the surface of PS colloid particles can be observed. Because of the cationic nature of the PDMAEMA brushes the colloid particles have positive zeta potentials at low pH values. X‐ray photoelectron spectroscopy (XPS) was used to analyze the surface of the colloid particles. N_1s binding energy of PDMAEMA chains on the surface of clay layers was detected by XPS. The two peaks of the N_1s binding energy indicate two different nitrogen environments on the surface of clay layers. The peak with a lower binding energy is characteristic of neutral nitrogen on PDMAEMA chains, and the peak with a higher binding energy is attributed to protonated nitrogen on PDMAEMA chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5759–5769, 2007     

Transmission electron microscopy observations of composite polymer colloid nucleated by functionalized silica

In this work, functionalized nanometric silica particles were engaged in emulsion polymerization of ethyl acrylate. The morphological characterization of this composite material was performed by transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS). We were particularly interested in the state of encapsulation of the silica particles and their distribution in the latex film. Initialy, we successively studied both components of the composite: polymer beads and silica particles differ by their size and also by their contrast. In addition, it was possible to perfrom dark field TEM to study this system of two amorphous phases because their respective amorphous halos are not too close. Hence, we investigated the colloid material in aqueous media and after film formation. Although no ideal encapsulation is observed in the colloid in aqueous media, the distribution of silica in the latex film is good. SAXS results are in good agreement with TEM observations.