纳米富勒烯(nC60)的生态毒性效应

随着纳米技术的飞速发展,纳米材料的应用日趋广泛.同时,纳米材料的大规模生产和应用对人体健康与生态环境可能产生的安全风险也引起了人们的普遍关注.富勒烯是应用最广泛的纳米材料之一,在水中能形成稳定的水溶性纳米颗粒,进而增大其在环境中的迁移性与生物暴露几率.然而目前对纳米富勒烯(nC60)的环境和毒性效应还知之甚少.本文综合评述了水溶性nC60纳米颗粒的制备、稳定机制、在环境中的迁移特性及其与环境中污染物的相互作用,并着重阐述了nC60可能产生的生物毒性效应.分析表明,nC60的生物毒性效应主要与nC60的表面化学特性和颗粒大小有关,同时环境介质也影响nC60的毒性.最后讨论了nC60生态环境效应研究中应加强的若干方面.     

二维过渡金属硫族化合物在生物医学中的应用

二维过渡金属硫族化合物(TMDs)是继石墨烯纳米材料发展之后一类新型的二维纳米材料. 由于其特殊的物理化学性质, TMDs二维纳米材料在能源、光电器件、催化反应等多个领域引起了人们广泛的研究兴趣. 近年来这类材料在纳米生物医学方面也得到人们广泛的关注. 这篇综述简单介绍TMDs二维层状纳米材料的制备、表面修饰、生物成像、肿瘤治疗和毒理学研究, 并对二维TMDs纳米材料未来在生物医学领域的发展做出展望.     

低维纳米材料的增强红外吸收与异常红外效应

由低维纳米材料组成的表面体系在电催化、磁学、储能、传感等领域得到广泛研究和应用.增强红外吸收与异常红外效应是其特殊的红外光学性能.作者综述了近年来他们在研究低维纳米材料的特殊红外光学性能方面的主要进展,包括系统研制和构筑各种具有特殊红外性能的低维纳米材料和纳米结构表面体系,发展表面组合电化学研究方法等.研究工作对揭示低维纳米材料的结构与性能之间的本质关系,发展相关的基础和理论具有重要意义.     

磁性荧光纳米材料的制备与性能

采用表面活性剂3-氨丙基三乙氧基硅烷(APTES)修饰Fe₃O₄磁性纳米粒子, 经质子化后, Fe₃O₄磁性纳米粒子表面披覆大量的正电荷, 与表面带负电荷的巯基丙酸(MPA)修饰的核壳CdSe/CdS/ZnS量子点(QDs)通过强烈的静电作用而发生组装, 得到兼具磁性和荧光性能的磁性荧光纳米材料. 利用透射电子显微镜(TEM)、傅里叶变换红外光谱仪(FTIR)、X射线衍射仪(XRD)、荧光分光光度计和振动样品磁强计(VSM)等测试手段对磁性荧光纳米材料进行表征. 研究表明, 由两种粒子组装的核壳结构复合粒子拥有良好的磁性能和荧光性能.     

多壁碳纳米管-钛酸盐纳米管复合纳米材料的制备及其生物电化学性能

以TiO2纳米颗粒为前体,采用碱性水热法制备出钛酸盐纳米管(TNTs)与多壁碳纳米管(MWCNTs)的复合纳米材料(MWCNT-TNT);借助透射电子显微镜、傅立叶变换红外光谱仪和X射线衍射仪分析了纳米材料的结构、组成和形貌.将辣根过氧化酶,室温离子液体,Nafion和复合纳米材料共同修饰在电极表面组成酶电极,利用循环伏安法研究了该酶电极的电化学性能.结果表明,TiO2纳米颗粒完全转化为钛酸盐纳米管并且很好的与MWCNTs结合在一起;复合材料修饰酶电极的循环伏安行为明显优于TNTs修饰酶电极,表明引入MWCNTs可改善钛酸盐纳米材料的导电性以及电化学性能.     

无机纳米-生物界面作用的SERS研究

探索生命体对无机纳米材料的生物应答机制是高效、安全、可控地应用无机纳米材料的基础,其关键在于准确理解在生物体系中无机纳米材料与生物分子间的纳米.生物界面作用.本文主要探讨了在纳米-生物界面具有拉曼增强效应的金、银纳米材料;介绍了表面增强拉曼光谱(surface-enhanced raman spectroscopy,SERS)原位研究金、银等无机纳米材料表/界面吸附的核酸、蛋白质、磷脂等生物分子,以及细胞、病毒和细菌等与金、银纳米材料表/界面作用的研究进展;综述了SERS技术在探索纳米-生物界面作用机制、生物分子测定、生物分子界面行为监测中的应用.     

氨基硅烷磁性纳米粒子修饰碳糊电极固定血红蛋白的过氧化氢传感器

过氧化氢(H_2O_2)不仅是许多高选择性的过氧化物酶的副产物,而且是食品、制药、临床、工业和环境分析等领域中的一种重要媒介体.近年来,对H_2O_2测定的研究尤为活跃.血红蛋白(Hb)具有良好的催化活性,经济价廉,在酶电极的制备及H_2O_2的催化测定方面有广泛的研究.氨基硅烷磁性纳米材料是近年来发展起来的一类新型的磁性纳米材料,它不仅同时具有纳米材料的独特性能和超顺磁性,而且易与具有亲和配体的蛋白质、酶、抗体等形成共价键而将其固定在材料的表面.     

脂质体@Ag/Au中空纳米壳层材料的制备及与H2O2的作用

以脂质体作为模板, 通过化学还原法制备了脂质体@Ag/Au 中空纳米材料, 并研究了其与过氧化氢(H₂O₂)的作用. 利用透射电子显微镜(TEM)、 紫外-可见(UV-Vis)吸收光谱和表面增强拉曼光谱(SERS)对纳米材料进行了表征. 在过氧化氢和纳米材料存在的情况下, 加入3,3 ',5,5'-四甲基联苯胺(TMB)作为显色液, 无色的TMB被氧化成蓝色的氧化TMB(oxTMB), 可以检测到反应后oxTMB在652 nm处的特征吸收强度及其拉曼光谱的变化. 实验结果表明, 当过氧化氢浓度在15100 μmol/L 范围内, oxTMB的特征吸收强度与其浓度呈线性关系, 可实现对过氧化氢的微量检测, 检测限为0.5 μmol/L.     

基于水滑石-金纳米粒子的阻抗型核酸适配体传感器的研究

在玻碳电极表面用电化学沉积法一步合成钴铝水滑石-金纳米粒子(CoAl LDH-GNPs)复合纳米材料,以复合纳米材料作为核酸适配体(Apt)的固定化基质,建立了一种高灵敏的阻抗型适配体传感器.采用扫描电镜(SEM)和能量色散谱仪(EDS)对CoAl LDH-GNPs复合纳米材料进行了表征,对电极的组装过程采用循环伏安法和电化学阻抗进行表征,对传感器的性能采用电化学阻抗进行研究.复合纳米材料CoAl LDH-GNPs构筑的传感器对凝血酶(THR)具有良好的信号响应,线性相关系数R=0.995,检出限为0.3 ng/L(S/N=3),检测范围为1.0 ng/L～ 100 μg/L.     

基于纳米材料的固相萃取在痕量元素及其形态分析中的应用

作为新型材料的典型代表,纳米材料具有粒径小、比表面积大、表面原子活性高等优点,已成为一类极具潜力的固相萃取材料,在痕量元素及其形态分析领域得到了广泛的应用.本文对不同类型纳米材料与原子光/质谱相结合在痕量元素及其形态分析中的应用现状进行了评述,包括零维纳米材料(如纳米球、富勒烯、量子点等)、一维纳米材料(如碳纳米管、纳米棒、纳米线等)、二维纳米材料(如纳米纤维、石墨烯/氧化石墨烯、层状双氢氧化物等)及三维纳米材料(如三维碳材料、纳米海绵、树枝状大分子等).为了改善其选择性、拓宽其在不同实际样品中的应用潜力、或进一步提高其吸附容量,一些新型的纳米材料包括离子印迹材料、限制性进入材料、金属有机框架材料等也被用于环境及生物样品中痕量元素及其形态的分析,推动了其在该研究领域的进一步发展.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.