气孔对透明陶瓷激光输出性能的影响

定量分析气孔大小和气孔率对陶瓷激光输出性能的影响,建立了气孔分布模型并结合Mie散射和固体激光技术相关理论,讨论气孔散射对陶瓷激光透过率和输出性能的影响。结果表明,气孔率对激光陶瓷的透过率和斜率效率有着决定性的影响。在给定的气孔尺寸分布下,气孔率越高,陶瓷透过率和激光斜率效率越低;在给定的气孔率下,气孔中心尺寸越大,陶瓷样品的透过率和激光斜率效率越低。减小气孔尺寸至0.3 m以下能有效提高激光斜率效率。气孔越大,激光阈值随气孔率增大而上升越快,越不利于实现激光输出。在实际工作中,改进和控制工艺减小气孔尺寸对提高陶瓷的输出性能同样有着重要意义。     

气孔对透明陶瓷激光输出性能的影响

定量分析气孔大小和气孔率对陶瓷激光输出性能的影响,建立了气孔分布模型并结合Mie散射和固体激光技术相关理论,讨论气孔散射对陶瓷激光透过率和输出性能的影响。结果表明,气孔率对激光陶瓷的透过率和斜率效率有着决定性的影响。在给定的气孔尺寸分布下,气孔率越高,陶瓷透过率和激光斜率效率越低;在给定的气孔率下,气孔中心尺寸越大,陶瓷样品的透过率和激光斜率效率越低。减小气孔尺寸至0.3 m以下能有效提高激光斜率效率。气孔越大,激光阈值随气孔率增大而上升越快,越不利于实现激光输出。在实际工作中,改进和控制工艺减小气孔尺寸对提高陶瓷的输出性能同样有着重要意义。     

透明陶瓷透光性能的影响因素

研究了影响激光透明陶瓷透光性能的主要因素,讨论了陶瓷内部气孔和杂质颗粒等散射粒子、晶界结构中晶界折射率与晶粒折射率的差异以及晶界表面粗糙度等因素对陶瓷透光性能的影响,并定量分析了激光陶瓷透过率随气孔尺寸、气孔率、晶粒相对晶界折射率以及晶界表面粗糙度的变化关系。结果表明： 陶瓷的透过率随着气孔率的减小而增大,但透过率随气孔尺寸的增大而呈现出周期性振荡,且当气孔尺寸与入射光波长可比拟时,陶瓷的透过率会明显降低;在晶界结构中,晶界的折射率与晶粒的折射率相差越小,陶瓷的透过率就越高;晶界表面粗糙度越大,透过率越低。然而,晶界折射率不同于晶粒折射率,这使得其陶瓷透过率降低的程度比对晶界表面粗糙度的影响明显得多。在陶瓷制备过程中,需要重点排除尺寸与入射波长可比拟的气孔, 以抑制晶界结构中第二相的产生。     

透明陶瓷透光性能的影响因素

 研究了影响激光透明陶瓷透光性能的主要因素,讨论了陶瓷内部气孔和杂质颗粒等散射粒子、晶界结构中晶界折射率与晶粒折射率的差异以及晶界表面粗糙度等因素对陶瓷透光性能的影响,并定量分析了激光陶瓷透过率随气孔尺寸、气孔率、晶粒相对晶界折射率以及晶界表面粗糙度的变化关系。结果表明： 陶瓷的透过率随着气孔率的减小而增大,但透过率随气孔尺寸的增大而呈现出周期性振荡,且当气孔尺寸与入射光波长可比拟时,陶瓷的透过率会明显降低;在晶界结构中,晶界的折射率与晶粒的折射率相差越小,陶瓷的透过率就越高;晶界表面粗糙度越大,透过率越低。然而,晶界折射率不同于晶粒折射率,这使得其陶瓷透过率降低的程度比对晶界表面粗糙度的影响明显得多。在陶瓷制备过程中,需要重点排除尺寸与入射波长可比拟的气孔, 以抑制晶界结构中第二相的产生。     

高功率陶瓷板条激光器

高功率固体激光在先进制造、能源、信息、医疗及国防等领域有广泛应用。激光陶瓷材料具有掺杂浓度均匀可控、抗激光热损伤能力强、易于制备大尺寸和复合结构等优点,被认为是高功率固体激光的重要增益材料。报道了本课题组近年来在高功率陶瓷板条激光方面的主要研究进展。采用中国科学院上海硅酸盐所制备的大尺寸Nd:YAG陶瓷板条,实现了平均功率4.35 kW的1 064 nm脉冲激光输出,脉冲宽度为160μs,重复频率为400 Hz。此外,采用中科院上海硅酸盐所制备的大尺寸Yb:YAG陶瓷板条,实现了平均功率9.8 kW的1 030 nm脉冲激光输出,脉冲宽度为560μs,重复频率为160 Hz,光光转换效率为60%。这些研究表明,激光陶瓷材料具备实现高功率、高光束质量与高效率激光的潜力。     

透明激光陶瓷散射损耗分析

为了定量分析激光陶瓷中散射损耗对其透过率的影响,通过建立气孔尺寸分布模型,引入第二相体积比概念,并结合Mie散射、瑞利散射和全散射积分等理论,讨论了激光陶瓷中气孔、晶界第二相和表面粗糙度等引起的散射损耗对激光陶瓷透光性能的影响。研究结果表明：气孔率的大小将明显影响陶瓷透过率,且气孔尺寸分布决定了透过率包络的变化趋势;晶界和表面散射对透过率的影响主要集中在短波长处;在气孔率较低情况下,晶界第二相的存在是导致短波长处透过率急剧降低的主要因素。     

透明激光陶瓷散射损耗分析

 为了定量分析激光陶瓷中散射损耗对其透过率的影响,通过建立气孔尺寸分布模型,引入第二相体积比概念,并结合Mie散射、瑞利散射和全散射积分等理论,讨论了激光陶瓷中气孔、晶界第二相和表面粗糙度等引起的散射损耗对激光陶瓷透光性能的影响。研究结果表明：气孔率的大小将明显影响陶瓷透过率,且气孔尺寸分布决定了透过率包络的变化趋势;晶界和表面散射对透过率的影响主要集中在短波长处;在气孔率较低情况下,晶界第二相的存在是导致短波长处透过率急剧降低的主要因素。     

晶粒尺寸对钙钛矿型压电陶瓷压电性能的影响

压电陶瓷能够通过正/逆压电效应实现电能与机械能之间的相互转化,在电子信息、通信、传感等领域中具有广阔的应用前景.压电陶瓷的压电性能对晶粒尺寸极为敏感,其晶粒尺寸效应的研究受到了广泛关注.本文对目前应用较多的几类钙钛矿型压电陶瓷,包括钛酸钡、锆钛酸铅、铌酸钾钠、钛酸铋钠陶瓷的压电性能晶粒尺寸效应的研究与进展进行了综述;总结了这些体系中晶粒尺寸的调控方法,晶粒尺寸效应的表现规律,同时回顾了相关物理模型与理论机制.本文为系统理解压电性能的晶粒尺寸效应提供了指导,并对压电陶瓷晶粒尺寸效应的未来研究方向做出了展望.     

激光烧蚀对碳纳米管薄膜场发射性能的影响

采用丝网印刷工艺制作了碳纳米管(CNTs)薄膜阴极.经适当能量激光烧蚀后,相互粘连的CNTs随表面粘附有机物的蒸发而分散开,管间隙增加、屏蔽效应减小,使得场发射性能大幅度提高,开启场强降低、场倍增因子β增大.Raman光谱分析表明,随激光能量增加,CNTs表面缺陷增多,成为新的场发射点,对其β增大的贡献加强.相对于两电极结构,三电极中平栅极结构场发射性能经激光烧蚀有更显著的改善.这说明激光烧蚀是提高CNTs场发射性能的有效方法. 关键词： 碳纳米管薄膜 场发射 激光烧蚀 Raman光谱     

Comparison of laser performance of electro-optic Q-switched Nd:YAG ceramic/single crystal laser

An electro-optic Q-switched Nd:YAG ceramic laser operating at kHz repetition rate was demonstrated.Thermal induced lens' focus of ceramic rod was measured and compensated by plano-convex cavity structure. Depolarization loss at different output powers was measured in Nd:YAG single crystal and ceramic lasers. High-energy high-beam-quality laser pulse output was obtained in both laser structures. Pulse energy of about 20 mJ and pulse width of less than 12 ns were achieved, and the average power reached 20 W. The divergence of output laser beam was less than 1.2 mrad, and the beam propagation factor M2was about 1.4.     

Dual-wavelength laser polarimeter and its performance capabilities

A dual-wavelength optical polarimetric approach has been proposed as a means of elimination of the systematic errors and estimation of the optical anisotropy parameters for a single DKDP crystal. Our HAUP-related polarimeter uses two semiconductor lasers with the neighbouring wavelengths of 635 nm and 650 nm. Based on the temperature dependence analysis of small characteristic azimuths of light polarization with respect to the axis of the sample, we found the parameters of imperfections of polarization system. We acquired eigen waves ellipticities in a DKDP crystal and found perpendicular to the optic axis value of the optical rotatory power. Our results correlate positively with previously measured data for KDP crystals.     

Optimization of the laser performance in Nd3+:YAG ceramic microchip lasers

Based on the four-level system, a theoretical model of diode-laser end-pumped fundamental continuous-wave Nd³⁺:YAG ceramic microchip lasers is proposed. The fluorescence concentration quenching effect and the absorption efficiency of the host have been taken into account in the model. The theoretical results of the numerical calculations are in good agreement with those of experiments. The effects of the concentration of the Nd³⁺:YAG ceramic, the thickness of the Nd³⁺:YAG ceramic, and the transmission of the output coupler on the laser performance (threshold and output power) are addressed. The optimization of the concentration and the thickness for the Nd³⁺:YAG ceramic microchip laser is presented. This modeling is not only applicable to the Nd³⁺:YAG ceramic microchip laser but also to other four-level microchip lasers. PACS 42.55.-f; 42.55.Xi; 42.70.Hj; 02.60.Cb     

The effect of laser beam size on laser-induced damage performance

The influence of laser beam size on laser-induced damage performance, especially damage probability and the laser-induced damage threshold (LIDT), is investigated. It is found that damage probability is dependent on beam size when various damage precursors with different potential behaviors are involved. This causes the damage probability and the LIDT to be different between cases under a large-aperture beam and a small-aperture beam. Moreover, the fluence fluctuation of the large-aperture laser beam brings out hot spots, which move randomly across the beam from shot to shot. Thus this leads the most probable maximum fluence after many shots at any location on the optical component to be several times the average beam fluence. These two effects result in the difference in the damage performance of the optical component between the cases under a large-aperture and small-aperture laser.     

Linewidth of SG-DBR laser and its effect on DPSK transmission

In this paper the linewidth of widely tunable SG-DBR lasers has been investigated theoretically and experimentally. We demonstrate experimentally the importance of obtaining low linewidth operation for the application of SG-DBR laser with advanced modulation format transmission. This is achieved by choosing two sets of tuning currents for an SG-DBR laser that give the same wavelength channel and good SMSR, but different linewidths. When the laser is employed in a DPSK system only the operating point (the set of drive currents used to obtain specific output characteristics) that portrays low linewidth achieves error free transmission. This work shows that although calibration of tunable lasers is normally based on achieving sufficient SMSR and output power, it will be important to consider the linewidth parameter as these lasers begin to be used in more spectrally efficient WDM systems employing advanced modulation formats. The simulation results illustrate that the operating points which achieve narrow linewidth are correlated with those that exhibit low threshold current. This finding may be used for calibration of SG-DBR lasers to achieve minimum linewidth at each operating wavelength.     

连续激光干扰效果评估方法北大核心CSCD

采用改进后的图像相关度计算方法,在精确配准干扰前后图像的基础上,以像素为单位计算图像相关度,根据人眼识别效果在评估前确定干扰阈值,计算图像有效干扰像元统计值,定量描述激光干扰效果;开展多波段激光干扰成像系统试验,采集不同干扰功率下的激光干扰图像,评估干扰效果。结果表明,该方法能精确识别图像局部变化,客观反映图像质量变化,对各波段不同功率下的激光干扰成像图像给出科学评估结果,对单对图像的处理速度优于s级,具有一定的工程应用价值。     

Carbon incorporation in GaAs/Al0.2Ga0.8As triple quantum wells and its effect on laser performance

We report an investigation of the interface quality of the Al_0.2Ga_0.8As/GaAs triple quantum wells (QWs) grown on the GaAs substrates 0° and 6° off (100) towards 〈111〉A at a high CO environment, using the photoluminescence technique. The direct correlation between the quantum well quality and the performance of lasers which contain such quantum wells as an active region is also reported. It is found that impurity-related photoluminescence is observed only in the sample grown on the exact (100) GaAs substrate but not in the tilted one, as confirmed by temperature dependence results. The full width at half maximum (FWHM) of the intrinsic luminescence is as high as 9.0 meV in the 0° tilted samples and decreases to 3.10 meV in the samples misoriented 6°, indicating a remarkable difference in their interface quality. The impurities incorporated into the interfaces of the QWs are carbon, incorporation of which becomes unobservable by photoluminescence when the quantum wells are grown on substrates misoriented by 6° degrees. The threshold current and quantum efficiency of the laser devices with Al_0.2Ga_0.8As/GaAs quantum wells as their active region are found to be directly related to the interfacial quality of the quantum wells.     

激光陀螺光路变动分析及其对陀螺性能的影响

分析了腔平移镜这一引起激光陀螺光路变动的主要因素,旨在揭示腔平移镜影响激光陀螺内部光路的机理及其影响的大小。通过分析计算得出,腔平移镜歪扭引起激光陀螺内部光束通过光栏中心位置时产生的横向位移相当于光栏半径10%~20%的变化。通过搭建光路测试系统,验证了腔平移镜歪扭的变化主要造成了激光陀螺内部光束通过光栏中心位置的变化这一结论,分析了这一变化对激光陀螺性能影响的机理。     

一种提高激光告警器性能的自适应方法

激光告警是激光对抗的重要前提和基本手段，如何在复杂背景噪声下识别来袭激光信号，进而准确报警是激光告警面临的首要问题。该文分析了激光告警设备检测概率与信噪比的关系，从关系式可以看出，为了提高激光告警设备的检测概率，需要增加激光信号的信噪比。提出了一种最大信噪比的自适应算法，进行了算法分析，并利用矩阵变换作出了算法简化，从而保证了系统信噪比的最佳化。最后对最佳权向量的求解这个问题，给出了适用于工程化的最佳权向量求解的简单迭代算法。