Application of conversion coatings to the growth of TTF–TCNQ thin films by CVD and conducting nanowires by dipping process

Thin films of the molecular conductor TTF–TCNQ are grown using chemical vapour deposition (CVD) on stainless steel conversion coating (SSCC) substrates. The fractal-like morphology and high adsorption properties of SSCC improve the surface coverage in CVD-grown thin films. 1 μm thick, oriented, conductive deposits are obtained and studied by SEM, IR, XRD and conductivity measurements. Additionally, an unexpected ability of SSCC to induce nanowire formation is shown. By successively dipping SSCC in TTF and TCNQ solutions, typically 20 nm×20 μm conducting wires and ribbons, and occasionally loops, form on the substrates. They could be separated from the surface and were studied by TEM, AFM and current–voltage measurements.     

Modulation of hemocompatibility of polysulfone by polyelectrolyte multilayer films

Polyelectrolyte multilayer (PEM) films have been recently applied to surface modification of biomaterials. Cellular interactions with PEM films consisted of weak polyelectrolytes are greatly affected by the conditions of polyelectrolyte deposition, such as pH of polyelectrolyte solution. Previous studies indicated that the adhesion of several types of mammalian cells to PAH/PAA multilayer films was hindered by low pH and high layer numbers. The objective of this study is to evaluate whether the hemocompatibility of polysulfone can be modulated by deposition of poly(allylamine hydrochloride) (PAH)/poly(acrylic acid) (PAA) multilayer films. PAH/PAA multilayer films with different layer numbers were assembled onto polysulfone at either pH 2.0 or pH 6.5. The number of platelet adhesion and the morphology of adherent platelets were determined to evaluate hemocompatibility of modified substrates. Compared to non-treat polysulfone, the PEM films developed at pH 2.0 decreased platelet adhesion, while those built at pH 6.5 enhanced platelet deposition. Platelet adhesion was found positively correlated to polyclonal antibodies binding to surface-bound fibrinogen. The extent of platelet spreading was increased with layer numbers of PEM films, suggesting that the adherent platelets on thick PEM films were prone to activation. In conclusion, PAH/PAA films with few layers developed at pH 2.0 possessed better hemocompatibility compared to other substrates.     

Synthesis and characterization of nitric oxide-releasing sol-gel microarrays

Diazeniumdiolate-modified sol-gel microarrays capable of releasing low levels of nitric oxide are reported as a viable means for improving the blood compatibility of a surface without fully modifying the underlying substrate. Several parameters are characterized including: (1) NO surface flux as a function of sol-gel composition and microarray geometry; (2) microstructure dimensions and spacing for optimal blood compatibility; and (3) the effect of sol-gel surface modification on analyte accessibility to platinum electrodes. The sol-gel microarrays release biologically relevant levels of NO under physiological conditions for >24 h. In vitro platelet adhesion assays indicate that a NO surface flux of 2.2 pmol cm(-2) s(-1) effectively reduces platelet adhesion to glass substrates modified with sol-gel microstructures separated by 50 microm. The blood compatibility observed for these micropatterned surfaces is comparable to NO-releasing sol-gel films. When the separation between NO-releasing microstructures is reduced to 10 microm, the NO surface flux required to reduce platelet adhesion is lowered to 0.4 pmol cm(-2) s(-1). Finally, the oxygen response of platinum electrodes modified with NO-releasing sol-gel microarrays indicates that selective modification via micropatterning enhances analyte accessibility to the sensor surface.     

蝶呤类化合物的荧光性能研究

研究了蝶呤类化合物的天然荧光特性。着重考察了新蝶呤、生物蝶呤、黄蝶呤和蝶呤在 p H7.7磷酸盐缓冲溶液条件下的荧光光谱及各种因素对其荧光强度的影响。在最佳实验条件下 ,四种蝶呤类化合物的线性范围为 :蝶呤 0 .6～ 2 .8μg/m L,新蝶呤 0～ 2 .6μg/m L,生物蝶呤 0～ 2 .4μg/m L,黄蝶呤 0～ 6.0 μg/m L,检出限依次为 :4.2 9× 1 0 - 7g/m L,6.71× 1 0 - 8g/m L,5.79× 1 0 - 9g/m L和 1 .75× 1 0 - 8g/m L     

Free-standing highly conductive transparent ultrathin single-walled carbon nanotube films

Transparent and conductive single-walled carbon nanotube (SWNT) films are of great importance to a number of applications such as optical and electronic devices. Here, we describe a simple approach for preparing free-standing highly conductive transparent SWNT films with a 20-150 nm thickness by spray coating from surfactant-dispersed aqueous solutions of SWNTs synthesized by an improved floating-catalyst growth method. After the HNO(3) treatment, dipping the SWNT films supporting on glass substrates in water resulted in a quick and nondestructive self-release to form free-standing ultrathin SWNT films on the water surface. The obtained films have sufficiently high transmittance (i.e., 95%), a very low sheet resistance (i.e., ～120 Ω/sq), and a small average surface roughness (i.e., ～3.5 nm for a displayed 10 × 10 μm area). Furthermore, the floating SWNT films on the water surface were easily transferred to any substrates of interest, without intense mechanical and chemical treatments, to preserve their original sizes and network structures. For example, the transferred SWNT films on poly(ethylene terephthalate) films are mechanically flexible, which is a great advantage over conventional indium-tin oxide (ITO) and therefore strongly promise to be "post ITO" for many applications.     

Surface modification and adhesion improvement of polyester films

Facile surface modification of polyester films was performed via chemical solutions treatment. Surface hydrolysis was carried out by means of sodium hydroxide solutions, leading to the formation of carboxylate groups. Three commercial polyester films of 100 μm in thickness were used in this work: AryLite?, Mylar?, and Teonex?, hydrolysis time being the main modification parameter. FTIR-ATR analysis, topography and contact angle (CA) measurements, surface free energy (SFE) and T-Peel adhesion tests were carried out to characterize the modified films. A quantitative estimate of the carboxylates surface coverage as a function of treatment time was obtained through a supramolecular approach, i.e. the ionic self-assembly of a tetracationic porphyrin chromophore onto the film surface. The surface free energy and critical surface tension of the hydrolyzed polyesters was evaluated by means of Zisman, Saito, Berthelot and Owens-Wendt methods. It was shown that NaOH solution treatment increases roughness, polarity and surface free energy of polymers. As a result, T-Peel strengths for modified Mylar? and Teonex? films were respectively 2.2 and 1.8 times higher than that for the unmodified films, whereas AryLite? adhesion test failed.     

A Commercial Nonbinding Surface Effectively Reduces Fibrinogen Adsorption but Does Not Prevent Platelet Adhesion to Fibrinogen

A commercial nonbinding surface effectively prevents protein adsorption; however, the platelet phenotype on this surface has yet to be defined. This study evaluates platelet adhesion and adsorption of several plasma/extracellular matrix (ECM) proteins to the nonbinding surface compared to other commonly used nontreated and high-binding surfaces. Platelet adhesion to uncoated microplates and those coated with fibrinogen or collagen is quantified by colorimetric assay. The binding capacity of the examined surfaces for plasma/ECM proteins is evaluated by measuring the relative and absolute protein adsorption. Compared to other surfaces, the nonbinding surface effectively prevents platelet adsorption, i.e. by 61-93% (Enzyme-Linked Immunosorbent Assay, ELISA), and reduces platelet adhesion, i.e. by 92%, when not coated with any protein. The nonbinding surface also decreases platelet deposition on collagen (up to 31%), but not fibrinogen. The nonbinding surface seems to be more of a low-fouling than nonfouling material, as it is able to reduce fibrinogen adsorption but not prevent platelet adhesion to fibrinogen. This feature should be considered when using the nonbinding surface for in vitro platelet testing.     

Protein coverage on polymer nanolayers leading to mesenchymal stem cell patterning

Interactions of gelatin and albumin with a photo-reactive diphenylamino-s-triazine bridged p-phenylene vinylene polymer (DTOPV) were examined by using surface plasmon resonance (SPR) spectroscopy to explore the effect of the polymer structure on protein coverage of DTOPV nanofilms. The SPR data revealed a significant increase of gelatin adsorption on UV-DTOPV nanofilms, while the adsorption of albumin was decreased by UV exposure in the time frame of the experiment. We also found that the selective adsorption of these proteins was highly dependent on the protein concentration; the highest selectivity of protein adsorption was obtained at the lowest concentration (3.5 μg ml(-1)), while no selective adsorption was confirmed at high concentrations (350 and 1000 μg ml(-1)). The selective attachment of mesenchymal stem cells (MSCs) was directly correlated with the selective adsorption of these proteins onto DTOPV nanofilms. The MSCs attachment onto UV-DTOPV films was promoted with only small mass coverage of gelatin, which led to MSC patterning onto the patterned DTOPV nanofilms successfully. The role of cell adhesion proteins that we found in this study will be a clue to elucidate the complex response of biomolecules on functional polymer nanolayers, and contribute to build up biocompatible surfaces on various advanced materials for the sake of cell engineering and medical implants.     

高效液相色谱-荧光分析法同时测定人体尿液中黄蝶呤与异黄蝶呤

建立了高效液相色谱-荧光法同时测定癌症病人尿液中黄蝶呤及异黄蝶呤的新方法。选择荧光检测波长λex=345nm,λem=420nm。以磷酸盐缓冲溶液(pH=7.5)-甲醇(体积比为98∶2)为流动相,流速1.0mL/min,黄蝶呤与异黄蝶呤含量分别在0.0013～0.945μg/mL及0.00017～0.118μg/mL范围内与色谱峰面积呈良好的线性关系,线性相关系数分别为0.9999和0.9996,检出限分别为0.5ng/mL和0.05ng/mL,加标平均回收率在86.2%～107.5%之间。方法应用于癌症病人尿样分析,取得了较好的结果。     

Albumin adsorption on unmodified and sulfonated polystyrene surfaces, in relation to cell-substratum adhesion

Albumin is commonly applied for blocking the adsorption of other proteins and to prevent the nonspecific adhesion of cells to diverse artificial substrata. Here we address the question of how effective these albumin properties are--by investigating unmodified and sulfonated polystyrene substrata with distinctly different wettabilities. As clearly shown with (125)I-radioisotopic assays, above a concentration of 10-20 μg/mL, the efficiency of bovine serum albumin (BSA) adsorption became markedly higher on the sulfonated surface than on the unmodified one. This study was assisted with the atomic force microscopy. On the unmodified surface, BSA, adsorbed from sufficiently concentrated solutions, formed a monolayer, with occasional intrusions of multilayered patches. Conversely, the arrangement of BSA on the sulfonated surface was chaotic; the height of individual molecules was lower than on the unmodified polystyrene. Importantly, the adhesion study of LNCaP and DU145 cells indicated that both surfaces, subjected to the prior BSA adsorption, did not completely loose their cell-adhesive properties. However, the level of adhesion and the pattern of F-actin organization in adhering cells have shown that cells interacted with unmodified and sulfonated surfaces differently, depending on the arrangement of adsorbed albumin. These results suggest the presence of some bare substratum area accessible for cells after the albumin adsorption to both types of investigated surfaces.     

Adsorption and hydrolysis of alcohols and carbonyls on ice at temperatures of the upper troposphere

The uptake of gaseous ethanol, 1,1,1-trifluoroethanol, acetone, chloral (CCl(3)CHO), and fluoral (CF(3)CHO) on ice films has been investigated using a coated-wall flow tube at temperatures 208-228 K corresponding to the upper troposphere (UT), with a mass spectrometric measurement of gas concentration. The uptake was largely reversible and followed Langmuir-type kinetic behavior, i.e., surface coverage increased with the trace gas concentration approaching a maximum surface coverage at a gas phase concentration of N(max) ～ (2-4) × 10(14) molecules cm(-3), corresponding to a surface coverage of ～30% of a monolayer (ML). The equilibrium partition coefficients, K(LinC), were obtained from the experimental data by analysis using the simple Langmuir model for specific conditions of temperature and concentration. The analysis showed that the K(LinC) depend only weakly on surface coverages. The following expressions described the temperature dependence of the partition coefficients (K(LinC)) in centimeters, at low coverage for ethanol, trifluoroethanol, acetone, chloral, and fluoral: K(LinC) = 1.36 × 10(-11)?exp(5573.5/T), K(LinC) = 3.74 × 10(-12)?exp(6427/T), K(LinC) = 3.04 × 10(-9)?exp(4625/T), K(LinC) = 7.52 × 10(-4)?exp(2069/T), and K(LinC) = 1.06 × 10(-2)?exp(904/T). For acetone and ethanol the enthalpies and entropies of adsorption derived from all available data showed systematic temperature dependence, which is attributed to temperature dependent surface modifications, e.g., QLL formation. For chloral and fluoral, there was an irreversible component of uptake, which was attributed to hydrate formation on the surface. Rate constants for these surface reactions derived using a Langmuir-Hinshelwood mechanism are reported.     

Multilayer film assembled from charged derivatives of chitosan: physical characteristics and biological responses

Polyelectrolyte multilayer films were successfully assembled from each of the three charged derivatives of chitosan; N-[(2-hydroxyl-3-trimethylammonium)propyl]chitosan chloride (HTACC), N-succinyl chitosan (SCC) and N-sulfofurfuryl chitosan (SFC), paired with one of the two oppositely charged polyelectrolytes, poly(acrylic acid) (PAA) and poly(allylamine hydrochloride) (PAH) on surface-treated poly(ethylene terephthalate) (treated PET) substrates by alternate layer-by-layer adsorption. Surface coverage and wettability of the multilayer films were determined by AFM and water contact angle measurements, respectively. Analysis by quartz crystal balance with dissipation (QCM-D) has suggested that all multilayer films are relatively rigid and have a high water content associated within their structures, accounting for up to 85-90% (w/w) for films having 7-10 layers. In vitro cytocompatibility tests for the fibroblast-like L929 cell line revealed a slight dependency for cell adhesion and proliferation on the outermost layer. The multilayer film containing HTACC exhibited moderate antibacterial activity against E. coli and S. aureus. Bearing negative charges, the multilayer films terminating with SFC and having at least 10 layers were capable of suppressing the adsorption of plasma proteins and platelet adhesion at a comparable level to the multilayer film assembled from heparin, a well-known antithrombogenic polymer.     

Phospholipids as an alternative to direct covalent coupling: surface functionalization of nanoporous alumina for protein recognition and purification

Anodic aluminum oxide (AAO) substrates with aligned, cylindrical, non-intersecting pores with diameters of 75 nm and depths of 3.5 or 10 μm were functionalized with lipid monolayers harboring different receptor lipids. AAO was first functionalized with dodecyl-trichlorosilane, followed by fusion of small unilamellar vesicles (SUVs) forming a lipid monolayer. The SUVs' lipid composition was transferred onto the AAO surface, allowing us to control the surface receptor density. Owing to the optical transparency of the AAO, the overall vesicle spreading process and subsequent protein binding to the receptor-doped lipid monolayers could be investigated in situ by optical waveguide spectroscopy (OWS). SUV spreading occurred at the pore-rim interface, followed by lateral diffusion of lipids within the pore-interior surface until homogeneous coverage was achieved with a lipid monolayer. The functionality of the system was demonstrated through streptavidin binding onto a biotin-DOPE containing POPC membrane, showing maximum protein coverage at 10 mol% of biotin-DOPE. The system enabled us to monitor in real-time the selective extraction of two histidine-tagged proteins, PIGEA14 (14 kDa) and ezrin (70 kDa), directly from cell lysate solutions using a DOGS-NTA(Ni)/DOPC (1:9) membrane. The purification process including protein binding and elution was monitored by OWS and confirmed by SDS-PAGE.     

Structural properties of lithium thio-germanate thin film electrolytes grown by radio frequency sputtering

In this study, lithium thio-germanate thin film electrolytes have been successfully prepared by radio frequency (RF) magnetron sputtering deposition in Ar gas atmospheres. The targets for RF sputtering were prepared by milling and pressing appropriate amounts of the melt-quenched starting materials in the nLi(2)S + GeS(2) (n = 1, 2, and 3) binary system. Approximately 1 μm thin films were grown on Ni coated Si (Ni/Si) substrates and pressed CsI pellets using 50 W power and 25 mtorr (～3.3 Pa) Ar gas pressures to prepare samples for Raman and Infrared (IR) spectroscopy, respectively. To improve the adhesion between the silicon substrate and the thin film electrolyte, a sputtered Ni layer (～120 nm) was used. The surface morphologies and thickness of the thin films were determined by field emission scanning electron microscopy (FE-SEM). The structural properties of the starting materials, target materials, and the grown thin films were examined by X-ray diffraction (XRD), Raman, and IR spectroscopy.     

流动注射-化学发光法测定富马酸依美斯汀

在酸性条件下,KMnO4与甲醛能够产生微弱的化学发光,而富马酸依美斯汀的存在能够大大增强该化学发光强度;结合流动注射技术,建立了测定富马酸依美斯汀的流动注射-化学发光新方法。该方法的线性范围分别为3.0×10-8～2.0×10-7g/mL,2.0×10-7～1.0×10-6g/mL和1.0×10-6～8.0×10-6g/mL。检出限为1.0×10-8g/mL,对2.0×10-6g/mL富马酸依美斯汀滴眼液平行测定11次,其相对标准偏差为1.3%。该方法已成功应用于滴眼液中富马酸依美斯汀的含量测定。     

Platelet adhesion to photodynamic therapy-treated extracellular matrix proteins

Photodynamic therapy (PDT) produces reactive species that alter vascular wall biology and vessel wall proteins. In this study, we examined platelet adhesion to PDT-treated (photosensitizer = Photofrin; fluence 100 J/cm2; lambda = 630 nm) extracellular matrix (ECM), fibrinogen, von Willebrand factor (vWF) and collagen Types I and III, under flow conditions in a recirculating perfusion chamber. Platelet adhesion was quantified by image analysis. The effect of PDT on vWF was assessed by measuring the binding of domain-specific antibodies to treated vWF. PDT significantly decreased platelet adhesion to the ECM, fibrinogen and vWF. However, PDT of collagen resulted in significantly increased platelet adhesion, with large aggregate formation. PDT affected mostly the A1 (glycoprotein [GP]-Ib-binding site), A2 and A3 (collagen-binding site) domains of vWF but not the D'-D3 (factor VIII-binding site) and B-C1 (GP-IIb/IIIa-binding site) domains. In conclusion, PDT can alter the ECM, resulting in decreased platelet adhesion. However, vessels with high collagen content, such as veins and small arteries, may become increasingly prone to thrombosis. The results of this study may thus play a role in understanding the thrombogenic properties and mechanisms of vascular PDT.     

Rapid analysis of alkylphosphonate drugs by capillary zone electrophoresis using indirect ultraviolet detection

A rapid capillary electrophoretic method for the analysis of three alkylphosphonate drugs (i.e. fosfomycin disodium (FOS), clodronate disodium (CLO) and alendronate sodium (ALN)) was developed by using multiple probe BGE and indirect UV detection. BGE containing 30 mM benzoic acid, 5 mM salicylic acid and 0.5 mM CTAB (pH 3.8), temperature of 30°C, applied voltage of ?30 kV and detection at 220 nm provided baseline separation of all analytes (resolution (R)>2.2) in 3.2 min. EOF reversal by addition of CTAB and negative voltage polarity leading to the co‐EOF flow and short analysis time. Two probe BGE greatly improved peak symmetry. The method showed good linearity (r²>0.999 in ranges of 20–1000 μg/mL for FOS, 100–1000 μg/mL for CLO and 100–750 μg/mL for ALN) repeatablitiy (RSD<2.15%), recovery (99.3–101.1%) and sensitivity (LOD<50 μg/mL). Freshly prepared BGE and sample solutions are essential for the method precision and accuracy. This new method can be utilized for routine analysis of FOS, CLO and ALN in dosage forms because of its efficiency, reliability, speed and simplicity.     

Cytotoxic Podophyllotoxin Type-Lignans from the Steam Bark of <em>Bursera fagaroides </em>var. <em>fagaroides</em>

The hydroalcoholic extract of the steam bark of B. fagaroides var. fagaroides displayed potent cytotoxic activity against four cancer cell lines, namely KB (ED₅₀ = 9.6 × 10^-2 μg/mL), PC-3 (ED₅₀ = 2.5 × 10^-1 μg/mL), MCF-7 (ED₅₀ = 6.6 μg/mL), and HF-6 (ED₅₀ = 7.1 × 10^-3 μg/mL). This extract also showed anti-tumour activity when assayed on mice inoculated with L5178Y lymphoma cells. Bioactivity-directed isolation of this extract, afforded seven podophyllotoxin-type lignans identified as podophyllotoxin (1), β-peltatin-A-methylether (2), 5'-desmethoxy-β-peltatin-A-methylether (3), desmethoxy-yatein (4), desoxypodophyllotoxin (5), burseranin (6), and acetyl podophyllotoxin (7) by 1D and 2DNMR and FAB-MS analyses, and comparison with reported values. All the isolated compounds showed potent cytotoxic activity in the cell lines tested, especially compound 3, which exhibited greater activity than camptothecin and podophyllotoxin against PC-3 (ED₅₀ = 1.0 × 10^-5 μg/mL), and KB (ED₅₀ = 1.0 × 10^-5 μg/mL). This is the first report of the isolation of podophyllotoxin and its acetate in a Bursera species.     

Therapeutic Drug Monitoring of Suramin and Protein Binding

Abstract

A liquid chromatographic method of suramin has been used for the determination of the polysulfonated naphtylurea in both plasma and plasma filtrate from prostate cancer patients treated with the drug. The chromatographic system is based on the use of tetrabutylammonium bromide as an ion-pairing agent, while UV detection at 237 nm and 313 nm is applied. The sample pretreatment is a simple deproteination step by an organic solvent. The same counter-ion as used in the phase system is added in order to increase the recovery of the almost complete protein-bound suramin. The minimum detectable concentration in plasma is ca. 20 ng/mL at 237 nm, in plasma filtrate 10 ng/mL at 237 nm.

The method was routinely applied in plasma level guided treatment of prostate cancer patients with suramin, as well as in protein binding studies. The data of the study demonstrated the necessity of therapeutic drug monitoring in suramin treatment: development of severe, irreversible toxicity could be prevented owing to timed withdrawal of suramin administration when total drug levels were beyond 300 μg/mL. Data of protein binding studies explained in part the development of severe toxicity associated with plasma levels beyond 300–350 μg/mL: at that point free fraction of suramin sharply increases from 500 ng/mL at a total plasma level of 500 μg/mL to 10 μg/mL at a total plasma concentration of 1000 μg/mL, which corresponds with a twenty-fold dose increase (2000%).     

Functional PEG-modified thin films for biological detection

We report a general procedure to prepare functional organic thin films for biological assays on oxide surfaces. Silica surfaces were functionalized by self-assembly of an amine-terminated silane film using both vapor- and solution-phase deposition of 3'-aminopropylmethyldiethoxysilane (APMDES). We found that vapor-phase deposition of APMDES under reduced pressure produced the highest quality monolayer films with uniform surface coverage, as determined by atomic force microscopy (AFM), ellipsometry, and contact angle measurements. The amine-terminated films were chemically modified with a mixture of carboxylic acid-terminated poly(ethylene glycol) (PEG) chains of varying functionality. A fraction of the PEG chains (0.1-10 mol %) terminated in biotin, which produced a surface with an affinity toward streptavidin. When used in pseudo-sandwich assays on waveguide platforms for the detection of Bacillus anthracis protective antigen (PA), these functional PEG surfaces significantly reduced nonspecific binding to the waveguide surface while allowing for highly specific binding. Detection of PA was used to validate these films for sensing applications in both buffer and complex media. Ultimately, these results represent a step toward the realization of a robust, reusable, and autonomous biosensor.