Unprecedented hour-long residence time of a cation in a left-handed G-quadruplex

Cations are critical for the folding and assembly of nucleic acids. In G-quadruplex structures, cations can bind between stacked G-tetrads and coordinate with negatively charged guanine carbonyl oxygens. They usually exchange between binding sites and with the bulk in solution with time constants ranging from sub-millisecond to seconds. Here we report the first observation of extremely long-lived K⁺ and NH₄⁺ ions, with an exchange time constant on the order of an hour, when coordinated at the center of a left-handed G-quadruplex DNA. A single-base mutation, that switched one half of the structure from left- to right-handed conformation resulting in a right–left hybrid G-quadruplex, was shown to remove this long-lived behaviour of the central cation.

An extremely long-lived cation has been detected in left-handed G-quadruplexes.     

A dual-fluorophore sensor approach for ratiometric fluorescence imaging of potassium in living cells

Potassium is the most abundant intracellular metal in the body, playing vital roles in regulating intracellular fluid volume, nutrient transport, and cell-to-cell communication through nerve and muscle contraction. On the other hand, aberrant alterations in K⁺ homeostasis contribute to a diverse array of diseases spanning cardiovascular and neurological disorders to diabetes to kidney disease to cancer. There is an unmet need for studies of K⁺ physiology and pathology owing to the large differences in intracellular versus extracellular K⁺ concentrations ([K⁺]_intra = 150 mM, [K⁺]_extra = 3–5 mM). With a relative dearth of methods to reliably measure dynamic changes in intracellular K⁺ in biological specimens that meet the dual challenges of low affinity and high selectivity for K⁺, particularly over Na⁺, currently available fluorescent K⁺ sensors are largely optimized with high-affinity receptors that are more amenable for extracellular K⁺ detection. We report the design, synthesis, and biological evaluation of Ratiometric Potassium Sensor 1 (RPS-1), a dual-fluorophore sensor that enables ratiometric fluorescence imaging of intracellular potassium in living systems. RPS-1 links a potassium-responsive fluorescent sensor fragment (PS525) with a low-affinity, high-selectivity crown ether receptor for K⁺ to a potassium-insensitive reference fluorophore (Coumarin 343) as an internal calibration standard through ester bonds. Upon intracellular delivery, esterase-directed cleavage splits these two dyes into separate fragments to enable ratiometric detection of K⁺. RPS-1 responds to K⁺ in aqueous buffer with high selectivity over competing metal ions and is sensitive to potassium ions at steady-state intracellular levels and can respond to decreases or increases from that basal set point. Moreover, RPS-1 was applied for comparative screening of K⁺ pools across a panel of different cancer cell lines, revealing elevations in basal intracellular K⁺ in metastatic breast cancer cell lines vs. normal breast cells. This work provides a unique chemical tool for the study of intracellular potassium dynamics and a starting point for the design of other ratiometric fluorescent sensors based on two-fluorophore approaches that do not rely on FRET or related energy transfer designs.

We report a dual-fluorophore approach for ratiometric fluorescent imaging of K⁺ levels in live cells. Intracellular esterases cleave RPS-1 to detach the K⁺-responsive fluorophore (PS525) from its internal standard (Coumarin 343).     

Controlling multiple orderings in metal thiocyanate molecular perovskites Ax{Ni[Bi(SCN)6]}

We report four new A-site vacancy ordered thiocyanate double double perovskites, , A = K⁺, NH₄⁺, CH₃(NH₃)⁺ (MeNH₃⁺) and C(NH₂)₃⁺ (Gua⁺), including the first examples of thiocyanate perovskites containing organic A-site cations. We show, using a combination of X-ray and neutron diffraction, that the structure of these frameworks depends on the A-site cation, and that these frameworks possess complex vacancy-ordering patterns and cooperative octahedral tilts distinctly different from atomic perovskites. Density functional theory calculations uncover the energetic origin of these complex orders and allow us to propose a simple rule to predict favoured A-site cation orderings for a given tilt sequence. We use these insights, in combination with symmetry mode analyses, to show that these complex orders suggest a new route to non-centrosymmetric perovskites, and mean this family of materials could contain excellent candidates for piezo- and ferroelectric applications.

Metal thiocyanate hybrid perovskites can have multiple simultaneous complex orderings and combining these orderings appropriately can produce non-centrosymmetric structures.     

Solvate sponge crystals of (DMF)3NaClO4: reversible pressure/temperature controlled juicing in a melt/press-castable sodium-ion conductor

A new type of crystalline solid, termed “solvate sponge crystal”, is presented, and the chemical basis of its properties are explained for a melt- and press-castable solid sodium ion conductor. X-ray crystallography and atomistic simulations reveal details of atomic interactions and clustering in (DMF)₃NaClO₄ and (DMF)₂NaClO₄ (DMF = N-N′-dimethylformamide). External pressure or heating results in reversible expulsion of liquid DMF from (DMF)₃NaClO₄ to generate (DMF)₂NaClO₄. The process reverses upon the release of pressure or cooling. Simulations reveal the mechanism of crystal “juicing,” as well as melting. In particular, cation–solvent clusters form a chain of octahedrally coordinated Na⁺–DMF networks, which have perchlorate ions present in a separate sublattice space in 3 : 1 stoichiometry. Upon heating and/or pressing, the Na⁺⋯DMF chains break and the replacement of a DMF molecule with a ClO₄⁻ anion per Na⁺ ion leads to the conversion of the 3 : 1 stoichiometry to a 2 : 1 stoichiometry. The simulations reveal the anisotropic nature of pressure induced stoichiometric conversion. The results provide molecular level understanding of a solvate sponge crystal with novel and desirable physical castability properties for device fabrication.

Stimuli-responsive “solvate-sponge”-(DMF)₃NaClO₄ exhibits linear chains of DMF–Na⁺ ions with ClO₄⁻ anions in the interstitial space. At increased pressure or temperature, DMF is expelled (reversibly), resulting in a new stoichiometry-(DMF)₂NaClO₄.     

The electronic structure and deexcitation pathways of an isolated metalloporphyrin ion resolved by metal L-edge spectroscopy

The local electronic structure of the metal-active site and the deexcitation pathways of metalloporphyrins are crucial for numerous applications but difficult to access by commonly employed techniques. Here, we applied near-edge X-ray absorption mass spectrometry and quantum-mechanical restricted active space calculations to investigate the electronic structure of the metal-active site of the isolated cobalt(iii) protoporphyrin IX cation (CoPPIX⁺) and its deexcitation pathways upon resonant absorption at the cobalt L-edge. The experiments were carried out in the gas phase, thus allowing for control over the chemical state and molecular environment of the metalloporphyrin. The obtained mass spectra reveal that resonant excitations of CoPPIX⁺ at the cobalt L₃-edge lead predominantly to the formation of the intact radical dication and doubly charged fragments through losses of charged and neutral side chains from the macrocycle. The comparison between experiment and theory shows that CoPPIX⁺ is in a ³A_2g triplet ground state and that competing excitations to metal-centred non-bonding and antibonding σ* molecular orbitals lead to distinct deexcitation pathways.

Near-edge X-ray absorption mass spectrometry (NEXAMS) and restricted active space (RAS) quantum mechanical calculations at the metal L-edge reveal the electronic structure and orbital-specific deexcitation pathways of gas-phase metalloporphyrins.     

Nernstian Li+ intercalation into few-layer graphene and its use for the determination of K+ co-intercalation processes

Alkali ion intercalation is fundamental to battery technologies for a wide spectrum of potential applications that permeate our modern lifestyle, including portable electronics, electric vehicles, and the electric grid. In spite of its importance, the Nernstian nature of the charge transfer process describing lithiation of carbon has not been described previously. Here we use the ultrathin few-layer graphene (FLG) with micron-sized grains as a powerful platform for exploring intercalation and co-intercalation mechanisms of alkali ions with high versatility. Using voltammetric and chronoamperometric methods and bolstered by density functional theory (DFT) calculations, we show the kinetically facile co-intercalation of Li⁺ and K⁺ within an ultrathin FLG electrode. While changes in the solution concentration of Li⁺ lead to a displacement of the staging voltammetric signature with characteristic slopes ca. 54–58 mV per decade, modification of the K⁺/Li⁺ ratio in the electrolyte leads to distinct shifts in the voltammetric peaks for (de)intercalation, with a changing slope as low as ca. 30 mV per decade. Bulk ion diffusion coefficients in the carbon host, as measured using the potentiometric intermittent titration technique (PITT) were similarly sensitive to solution composition. DFT results showed that co-intercalation of Li⁺ and K⁺ within the same layer in FLG can form thermodynamically favorable systems. Calculated binding energies for co-intercalation systems increased with respect to the area of Li⁺-only domains and decreased with respect to the concentration of –K–Li– phases. While previous studies of co-intercalation on a graphitic anode typically focus on co-intercalation of solvents and one particular alkali ion, this is to the best of our knowledge the first study elucidating the intercalation behavior of two monovalent alkali ions. This study establishes ultrathin graphitic electrodes as an enabling electroanalytical platform to uncover thermodynamic and kinetic processes of ion intercalation with high versatility.

Nernstian signatures and swift voltammetry at graphene electrodes help elucidate alkali ion (co-)intercalation.     

Metal binding and interdomain thermodynamics of mammalian metallothionein-3: enthalpically favoured Cu+ supplants entropically favoured Zn2+ to form Cu4+ clusters under physiological conditions

Metallothioneins (MTs) are a ubiquitous class of small metal-binding proteins involved in metal homeostasis and detoxification. While known for their high affinity for d¹⁰ metal ions, there is a surprising dearth of thermodynamic data on metals binding to MTs. In this study, Zn²⁺ and Cu⁺ binding to mammalian metallothionein-3 (MT-3) were quantified at pH 7.4 by isothermal titration calorimetry (ITC). Zn²⁺ binding was measured by chelation titrations of Zn₇MT-3, while Cu⁺ binding was measured by Zn²⁺ displacement from Zn₇MT-3 with competition from glutathione (GSH). Titrations in multiple buffers enabled a detailed analysis that yielded condition-independent values for the association constant (K) and the change in enthalpy (ΔH) and entropy (ΔS) for these metal ions binding to MT-3. Zn²⁺ was also chelated from the individual α and β domains of MT-3 to quantify the thermodynamics of inter-domain interactions in metal binding. Comparative titrations of Zn₇MT-2 with Cu⁺ revealed that both MT isoforms have similar Cu⁺ affinities and binding thermodynamics, indicating that ΔH and ΔS are determined primarily by the conserved Cys residues. Inductively coupled plasma mass spectrometry (ICP-MS) analysis and low temperature luminescence measurements of Cu-replete samples showed that both proteins form two Cu₄⁺–thiolate clusters when Cu⁺ displaces Zn²⁺ under physiological conditions. Comparison of the Zn²⁺ and Cu⁺ binding thermodynamics reveal that enthalpically-favoured Cu⁺, which forms Cu₄⁺–thiolate clusters, displaces the entropically-favoured Zn²⁺. These results provide a detailed thermodynamic analysis of d¹⁰ metal binding to these thiolate-rich proteins and quantitative support for, as well as molecular insight into, the role that MT-3 plays in the neuronal chemistry of copper.

Metallothioneins (MTs) are a ubiquitous class of small metal-binding proteins involved in metal homeostasis and detoxification.     

The inorganic cation-tailored “trapdoor” effect of silicoaluminophosphate zeolite for highly selective CO2 separation

Functional nanoporous materials are widely explored for CO₂ separation, in particular, small-pore aluminosilicate zeolites having a “trapdoor” effect. Such an effect allows the specific adsorbate to push away the sited cations inside the window followed by exclusive admission to the zeolite pores, which is more advantageous for highly selective CO₂ separation. Herein, we demonstrated that the protonated organic structure-directing agent in the small-pore silicoaluminophosphate (SAPO) RHO zeolite can be directly exchanged with Na⁺, K⁺, or Cs⁺ and that the Na⁺ form of SAPO-RHO exhibited unprecedented separation for CO₂/CH₄, superior to all of the nanoporous materials reported to date. Rietveld refinement revealed that Na⁺ is sited in the center of the single eight-membered ring (s8r), while K⁺ and Cs⁺ are sited in the center of the double 8-rings (d8rs). Theoretical calculations showed that the interaction between Na⁺ and the s8r in SAPO-RHO was stronger than that in aluminosilicate RHO, giving an enhanced “trapdoor” effect and record high selectivity for CO₂ with the separation factor of 2196 for CO₂/CH₄ (0.02/0.98 bar). The separation factor of Na-SAPO-RHO for CO₂/N₂ was 196, which was the top level among zeolitic materials. This work opens a new avenue for gas separation by using diverse silicoaluminophosphate zeolites in terms of the cation-tailored “trapdoor” effect.

The sodium form of silicoaluminophosphate RHO zeolite exhibits a pronounced cation-tailored “trapdoor” effect, showing an unprecedented selectivity adsorption separation performance for CO₂/CH₄ and CO₂/N₂.     

Thermodynamics of ion binding and occupancy in potassium channels

Potassium channels modulate various cellular functions through efficient and selective conduction of K⁺ ions. The mechanism of ion conduction in potassium channels has recently emerged as a topic of debate. Crystal structures of potassium channels show four K⁺ ions bound to adjacent binding sites in the selectivity filter, while chemical intuition and molecular modeling suggest that the direct ion contacts are unstable. Molecular dynamics (MD) simulations have been instrumental in the study of conduction and gating mechanisms of ion channels. Based on MD simulations, two hypotheses have been proposed, in which the four-ion configuration is an artifact due to either averaged structures or low temperature in crystallographic experiments. The two hypotheses have been supported or challenged by different experiments. Here, MD simulations with polarizable force fields validated by ab initio calculations were used to investigate the ion binding thermodynamics. Contrary to previous beliefs, the four-ion configuration was predicted to be thermodynamically stable after accounting for the complex electrostatic interactions and dielectric screening. Polarization plays a critical role in the thermodynamic stabilities. As a result, the ion conduction likely operates through a simple single-vacancy and water-free mechanism. The simulations explained crystal structures, ion binding experiments and recent controversial mutagenesis experiments. This work provides a clear view of the mechanism underlying the efficient ion conduction and demonstrates the importance of polarization in ion channel simulations.

Polarization shapes the energy landscape of ion conduction in potassium channels.     

Trioxatriangulenium (TOTA+) as a robust carbon-based Lewis acid in frustrated Lewis pair chemistry

We report the reactivity between the water stable Lewis acidic trioxatriangulenium ion (TOTA⁺) and a series of Lewis bases such as phosphines and N-heterocyclic carbene (NHC). The nature of the Lewis acid–base interaction was analyzed via variable temperature (VT) NMR spectroscopy, single-crystal X-ray diffraction, UV-visible spectroscopy, and DFT calculations. While small and strongly nucleophilic phosphines, such as PMe₃, led to the formation of a Lewis acid–base adduct, frustrated Lewis pairs (FLPs) were observed for sterically hindered bases such as P(^tBu)₃. The TOTA⁺–P(^tBu)₃ FLP was characterized as an encounter complex, and found to promote the heterolytic cleavage of disulfide bonds, formaldehyde fixation, dehydrogenation of 1,4-cyclohexadiene, heterolytic cleavage of the C–Br bonds, and interception of Staudinger reaction intermediates. Moreover, TOTA⁺ and NHC were found to first undergo single-electron transfer (SET) to form [TOTA]·[NHC]˙⁺, which was confirmed via electron paramagnetic resonance (EPR) spectroscopy, and subsequently form a [TOTA–NHC]⁺ adduct or a mixture of products depending the reaction conditions used.

Frustration at carbon! Herein, we present a frustrated Lewis pair system derived from a water stable carbon-based Lewis acid, trioxatriangulene (TOTA⁺), and a variety of Lewis bases, which successfully promotes bond cleavage and molecule fixation.     

Efficient alkene hydrosilation with bis(8-quinolyl)phosphine (NPN) nickel catalysts. The dominant role of silyl-over hydrido-nickel catalytic intermediates

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with a variety of hydrosilanes under mild conditions and low catalyst loadings. DFT studies reveal the presence of two coupled catalytic cycles based on [(NPN)NiH]⁺ and [(NPN)NiSiR₃]⁺ active species, with the latter being more efficient for producing the product. The preferred silyl-based catalysis is not due to a more facile insertion of alkene into the Ni–Si (vs. Ni–H) bond, but by consistent and efficient conversions of the hydride to the silyl complex.

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with hydrosilanes under mild conditions and low catalyst loadings.     

Acid–base chemistry at the single ion limit

We present the results of acid–base experiments performed at the single ion (H⁺ or OH⁻) limit in ∼6 aL volume nanopores incorporating electrochemical zero-mode waveguides (E-ZMWs). At pH 3 each E-ZMW nanopore contains ca. 3600H⁺ ions, and application of a negative electrochemical potential to the gold working electrode/optical cladding layer reduces H⁺ to H₂, thereby depleting H⁺ and increasing the local pH within the nanopore. The change in pH was quantified by tracking the intensity of fluorescein, a pH-responsive fluorophore whose intensity increases with pH. This behavior was translated to the single ion limit by changing the initial pH of the electrolyte solution to pH 6, at which the average pore occupancy 〈n〉_pore ∼3.6H⁺/nanopore. Application of an electrochemical potential sufficiently negative to change the local pH to pH 7 reduces the proton nanopore occupancy to 〈n〉_pore ∼0.36H⁺/nanopore, demonstrating that the approach is sensitive to single H⁺ manipulations, as evidenced by clear potential-dependent changes in fluorescein emission intensity. In addition, at high overpotential, the observed fluorescence intensity exceeded the value predicted from the fluorescence intensity-pH calibration, an observation attributed to the nucleation of H₂ nanobubbles as confirmed both by calculations and the behavior of non-pH responsive Alexa 488 fluorophore. Apart from enhancing fundamental understanding, the approach described here opens the door to applications requiring ultrasensitive ion sensing, based on the optical detection of H⁺ population at the single ion limit.

Visualizing dynamic change in the number of protons during electroreduction of protons in attoliter volume zero-mode waveguides.     

Cation recognition on a fullerene-based macrocycle

Heterocyclic orifices in cage-opened fullerene derivatives are regarded as potential ligands toward metals or ions, being reminiscent of truncated fullerenes as a hypothetical class of macrocycles with spherical π-conjugation. Among a number of cage-opened examples reported thus far, the coordination ability and dynamic behavior in solution still remained unclear due to difficulties in structural determination with multiple coordination sites on the macrocycles. Herein, we present the detailed solution dynamics of a cage-opened C₆₀ derivative bearing a diketo bis(hemiketal) moiety in the presence of alkali metal ions. The NMR spectroscopy disclosed the coordination behavior which is identified as a two-step process with a 1 : 2 stoichiometry. Upon coordination to the Li⁺ ion, the macrocycle largely varies its properties, i.e., increased absorption coefficients in the visible region due to weakly-allowed charge transfer transitions as well as the inner potential field from neutral to positive by the charge delocalization along with the spherical π-surface. The Li⁺-complexes formed in situ underwent unprecedented selective dehydroxyhydrogenation under high-pressure conditions. These findings would facilitate further studies on fullerene-based macrocycles as metal sensors, bulky ligands in organic reactions, and ion carriers in batteries and biosystems.

A fullerene-based Lewis-basic macrocyclic ligand underwent complexation with alkali-metal ions in 1 : 1 and 1 : 2 fashions, resulting in considerable perturbation to absorption properties as well as the potential surface inside the cage.     

Real-time analysis of methylalumoxane formation

Methylalumoxane (MAO), a perennially useful activator for olefin polymerization precatalysts, is famously intractable to structural elucidation, consisting as it does of a complex mixture of oligomers generated from hydrolysis of pyrophoric trimethylaluminum (TMA). Electrospray ionization mass spectrometry (ESI-MS) is capable of studying those oligomers that become charged during the activation process. We have exploited that ability to probe the synthesis of MAO in real time, starting less than a minute after the mixing of H₂O and TMA and tracking the first half hour of reactivity. We find that the process does not involve an incremental build-up of oligomers; instead, oligomerization to species containing 12–15 aluminum atoms happens within a minute, with slower aggregation to higher molecular weight ions. The principal activated product of the benchtop synthesis is the same as that observed in industrial samples, namely [(MeAlO)₁₆(Me₃Al)₆Me]⁻, and we have computationally located a new sheet structure for this ion 94 kJ mol⁻¹ lower in Gibbs free energy than any previously calculated.

The activator methylaluminoxane is made by hydrolysis of trimethylaluminum. Analysis using ESI-MS reveals rapid formation of small oligomers is followed by slower aggregation to the larger precursors most capable of releasing [Me₂Al]⁺.     

The Role of Alkali Metal in α‐MnO2 Catalyzed Ammonia‐Selective Catalysis

The unexpected phenomenon and mechanism of the alkali metal involved NH₃ selective catalysis are reported. Incorporation of K⁺ (4.22 wt %) in the tunnels of α‐MnO₂ greatly improved its activity at low temperature (50–200 °C, 100 % conversion of NO_x vs. 50.6 % conversion over pristine α‐MnO₂ at 150 °C). Experiment and theory demonstrated the atomic role of incorporated K⁺ in α‐MnO₂. Results showed that K⁺ in the tunnels could form a stable coordination with eight nearby O atoms. The columbic interaction between the trapped K⁺ and O atoms can rearrange the charge population of nearby Mn and O atoms, thus making the topmost five‐coordinated unsaturated Mn cations (Mn_5c, the Lewis acid sites) more positive. Therefore, the more positively charged Mn_5c can better chemically adsorb and activate the NH₃ molecules compared with its pristine counterpart, which is crucial for subsequent reactions.     

Thermodynamics and kinetics of protonated merocyanine photoacids in water

Metastable-state photoacids (mPAHs) are chemical species whose photo-activated state is long-lived enough to allow for proton diffusion. Liao''s photoacid (1) represents the archetype of mPAHs, and is being widely used on account of its unique capability to change the acidity of aqueous solutions reversibly. The behavior of 1 in water, however, still remains poorly understood. Herein, we provide in-depth insights on the thermodynamics and kinetics of 1 in water through a series of comparative ¹H NMR and UV-Vis studies and relative modelling. Under dark conditions, we quantified a three-component equilibrium system where the dissociation (K_a) of the open protonated form (MCH) is followed by isomerization (K_c) of the open deprotonated form (MC) to the closed spiropyran form (SP) – i.e., in the absence of light, the ground state acidity can be expressed as K^GS_a = K_a(1 + K_c). On the other hand, under powerful and continuous light irradiation we were able to assess, for the first time experimentally, the dissociation constant (K^MS_a) of the protonated metastable state (cis-MCH). In addition, we found that thermal ring-opening of SP is always rate-determining regardless of pH, whereas hydrolysis is reminiscent of what is found for Schiff bases. The proposed methodology is general, and it was applied to two other compounds bearing a shorter (ethyl, 2) and a longer (butyl, 3) alkyl-1-sulfonate bridge. We found that the pK_a remains constant, whereas both pK_c and pK^MS_a linearly increase with the length of the alkyl bridge. Importantly, all results are consistent with a four-component model cycle, which describes perfectly the full dynamics of proton release/uptake of 1–3 in water. The superior hydrolytic stability and water solubility of compound 3, together with its relatively high pK^GS_a (low K_c), allowed us to achieve fully reversible jumps of 2.5 pH units over 18 consecutive cycles (6 hours).

We rationalize the behaviour of protonated merocyanines in water through cross-validation of ¹H NMR, UV-Vis and pH measurements, and show their capability to act as reversible photoacids along light/dark cycles can be described by a four-state model.     

Aggregation-induced photocatalytic activity and efficient photocatalytic hydrogen evolution of amphiphilic rhodamines in water

The development of photocatalysts is an essential task for clean energy generation and establishing a sustainable society. This paper describes the aggregation-induced photocatalytic activity (AI-PCA) of amphiphilic rhodamines and photocatalytic functions of the supramolecular assemblies. The supramolecular assemblies consisting of amphiphilic rhodamines with octadecyl alkyl chains exhibited significant photocatalytic activity under visible light irradiation in water, while the corresponding monomeric rhodamines did not exhibit photocatalytic activity. The studies on the photocatalytic mechanism by spectroscopic and microscopic analyses clearly demonstrated the AI-PCA of the rhodamines. Moreover, the supramolecular assemblies of the rhodamines exhibited excellent photocatalytic hydrogen evolution rates (up to 5.9 mmol g⁻¹ h⁻¹).

Simple amphiphilic rhodamines formed supramolecular assemblies and exhibited aggregation-induced photocatalytic activity and hydrogen evolution in water.     

Rendering hydrophobic nanoclusters water-soluble and biocompatible

Hydrophobic and hydrophilic nanoclusters embody complementary superiorities. The means to amalgamate these superiorities, i.e., the atomic precision of hydrophobic clusters and the water dissolvability of hydrophilic clusters, remains challenging. This work presents a versatile strategy to render hydrophobic nanoclusters water-soluble—the micellization of nanoclusters in the presence of solvent-conjoined Na⁺ cations—which overcomes the above major challenge. Specifically, although [Ag₂₉(SSR)₁₂(PPh₃)₄]³⁻ nanoclusters are absolutely hydrophobic, they show good dissolvability in aqueous solution in the presence of solvent-conjoined Na⁺ cations (Na₁(NMP)₅ or Na₃(DMF)₁₂). Such cations act as both counterions of these nanoclusters and surface cosolvent of cluster-based micelles in the aqueous phase. A combination of DLS (dynamic light scattering) and aberration-corrected HAADF-STEM (high angle annular dark field detector scanning transmission electron microscopy) measurements unambiguously shows that the phase-transfer of hydrophobic Ag₂₉ into water is triggered by the micellization of nanoclusters. Owing to the excellent water solubility and stability of [Ag₂₉(SSR)₁₂(PPh₃)₄]³⁻[Na₁(NMP)₅]₃⁺ in H₂O, its performance in cell staining has been evaluated. Furthermore, the general applicability of the micellization strategy has been verified. Overall, this work presents a convenient and efficient approach for the preparation of cluster-based, biocompatible nanomaterials.

The presence of solvent-conjoined cations, [Na₁(NMP)₅]⁺ or [Na₃(DMF)₁₂]³⁺, induces the micellization of hydrophobic nanoclusters, rendering these nanoclusters water-soluble and biocompatible.     

Combined spectroscopic studies on post-functionalized Au25 cluster as an ATR-FTIR sensor for cations

Recently, significant research activity has been devoted to thiolate-protected gold clusters due to their attractive optical and electronic properties. These properties as well as solubility and stability can be controlled by post-synthetic modification strategies. Herein, the ligand exchange reaction between Au₂₅(2-PET)₁₈ cluster (where 2-PET is 2-phenylethanethiol) and di-thiolated crown ether (t-CE) ligands bearing two chromophores was studied. The post-functionalization aimed to endow the cluster with ion binding properties. The exchange reaction was followed in situ by UV-vis, ¹H NMR and HPLC. MALDI mass analysis revealed the incorporation of up to 5 t-CE ligands into the ligand shell. Once functionalized MALDI furthermore showed complexation of sodium ions to the cluster. ATR-FTIR spectroscopic studies using aqueous solutions of K⁺, Ba²⁺, Gd³⁺ and Eu³⁺ showed noticeable spectral shifts of the C–O stretching band around 1100 cm⁻¹ upon complexation. Further spectral changes point towards a conformational change of the two chromophores that are attached to the crown ether. Density functional theory calculations indicate that the di-thiol ligand bridges two staple units on the cluster. The calculations furthermore reproduce the spectral shift of the C–O stretching vibrations upon complex formation and reveal a conformational change that involves the two chromophores attached to the crown ether. The functionalized clusters have therefore attractive ion sensing properties due to the combination of binding properties, mainly due to the crown ether, and the possibility for signal transduction via an induced conformational change involving chromophore units.

Using ligand exchange reactions an atomically precise gold cluster was functionalized with a di-thiolated crown ether. Using in situ infrared spectroscopy films of the resulting composite were shown to incorporate metal cations.