石墨烯导热性能及其测试方法

石墨烯以其独特的结构和优异的性能引起人们广泛的关注。本文通过总结近期国内外石墨烯导热工作研究进展,梳理了石墨烯的导热机理,根据导热机理指出缺陷、基底、石墨烯边缘是影响石墨烯热导率的主要因素。综述了采用分子动力学及非平衡态格林函数方法进行石墨烯热导率模型计算的研究成果,并在模型的基础上,全面阐述了实验方面针对不同层数石墨烯热导率的测试方法及结果。     

正丁基氯化镁还原氧化石墨烯的表征

采用元素分析、红外光谱(FTIR)、X射线光电子能谱(XPS)、拉曼光谱、X射线衍射(XRD)、固体¹³C核磁共振波谱(¹³C MAS NMR)、热失重分析(TGA)、导电率测试以及原子力显微镜(AFM)等手段对正丁基氯化镁还原的氧化石墨烯进行了系统的表征. 结果表明, 正丁基氯化镁可以有效还原氧化石墨烯, 随着其用量的增加, 氧化石墨烯还原程度增加, 碳/氧摩尔比升高, 片层间距减小, 热稳定性增强, 导电率增大(可达3.6×10² S/m). 还原后部分氧化石墨烯片层发生聚集.     

自由基反应诱导的溴功能化还原氧化石墨烯的制备

以氧化石墨烯(GO)为原料,N-溴代丁二酰亚胺(NBS)为溴代试剂,硫代硫酸钠为还原剂,通过羧基化、溴化和还原三步法,采用自由基反应的方式制备了溴功能化还原氧化石墨烯(rGOBr).通过X射线衍射、扫描电子显微镜、红外光谱、拉曼光谱以及X射线光电子能谱等手段对rGOBr的结构、微观形貌和元素组成进行了表征.结果表明,溴元素以共价键的形式分布在石墨烯表面.本方法原料来源广泛、操作简单且条件温和,为石墨烯的溴功能化提供了一条新途径.     

Determination of Sudan I Using Electrochemically Reduced Graphene Oxide

Electrochemically reduced graphene oxide (ER-GO) was prepared by reducing exfoliated graphene oxide sheets on a glassy carbon electrode (GCE). The voltammetric responses of Sudan I-IV were studied at the ER-GO modified GCE (ER-GO/GCE). Compared with chemically reduced graphene oxide (CR-GO) modified electrode (CR-GO/GCE), ER-GO/GCE showed higher voltammetric responses to Sudan I. The electrode had a linear response to Sudan I in the range of 0.04–8.0 µmol L^?1 and a detection limit of 0.01 µmol L^?1. The real sample determination indicated that the proposed method was reliable, effective, and sufficient.     

Optimization of Electrical Conductivity of SA-graphene Nanocomposites Using Response Surface Methodology

Synthesis and characterization of 4-{(E)-[(5-bromo-2-hydroxyphenyl)methylidene]amino}-N-carbamimidoylbenzene-1-sulfonamide(SA) and its composites with graphene(SA-GF) were performed. Compound SA and SA-GF were characterized by FTIR and ¹H NMR. The GF dispersion in the composites was analyzed by means of scanning electron microscopy(SEM) for morphology. Thermal properties of SA and nanocomposites were investigated using differential thermal analysis(DTA) and thermogravimetric analysis(TGA). The optimum electrical conductivity of the new sulfonamide-based Schiff base was determined to be 1.78×10^–5 S/cm at a frequency of 9923 Hz, an applied voltage of –19 V, a mass fraction of 9.38% for graphene loading using a central composite design in the response surface methodology. The significance of the selected parameters(frequency, voltage and GF amount) in the model was determined by the analysis of variance(ANOVA). The results showed that frequency and graphene loading represent important model terms and have considerable effects on the conductivity of SA.     

A Green and Mild Approach of Synthesis of Highly-Conductive Graphene Film by Zn Reduction of Exfoliated Graphite Oxide

We report a simple and green approach to synthesize reduced graphene oxide (RGO) nanosheets at room temperature based on Zn reduction of exfoliated GO. The evolution of GO to RGO has been characterized by X-ray diffraction, UV-Vis absorption spectroscopy and Raman spectroscopy. The results of X-ray photoelectron spectroscopy reveal that the atomic ratio of carbon to oxygen in the RGO can be tuned from 1.67 to 13.7 through controlling the reduction time. Moreover, the conductivity of the RGO is measured to be 26.9±2.2 kS/m, much larger than those previously obtained by chemical reduction through other reducing agents. More importantly, the resistance of the RGO film with 20 nm thick-ness can be as low as 2 kΩ/square, while a high transparency over 70% within a broad spectral range from 0.45 μm to 1.50 μm can be retained. The proposed method is low-cost, eco-friendly and highly-effcient, the as-prepared thinner RGO films are useful in a variety of potential application fields such as optoelectronics, photovoltaics and electrochemistry by serving as an ultralight, flexible and transparent electrode material.     

氧化石墨烯的可控还原及结构表征

采用氧化还原法, 通过控制还原时间制备了不同还原程度的石墨烯; 用红外光谱、 紫外光谱、 拉曼光谱、 X射线衍射、 热重分析、 电导率测量等多种手段系统研究了不同还原程度石墨烯的结构与性能; 采用透射电子显微镜、 扫描电子显微镜和原子力显微镜比较了氧化石墨烯和石墨烯的形貌. 结果表明, 随着还原程度的增加, 石墨烯中含氧基团减少, 紫外吸收峰逐渐红移, D带与G带的强度比增加, 热稳定性和导电性提高. 微观结构表征说明石墨烯比氧化石墨烯片的厚度增加, 褶皱增多.     

电位调控制备还原氧化石墨烯的电催化性能研究

本文通过控制电位还原氧化石墨烯,可控制备不同含氧官能团的石墨烯纳米材料。以多巴胺、[Fe(CN)_6]~(3-)、NADH为电活性探针,研究了石墨烯表面含氧官能团、缺陷、表面荷电性质以及导电性等对石墨烯电催化性能的影响。研究发现,低还原程度的氧化石墨烯表面含有大量缺陷和丰富的官能团,能够促进多巴胺自催化反应,也有利于K_3[Fe(CN)_6]在电极表面的电子转移;随着氧化石墨烯还原程度提高,其导电性逐渐得到改善,且其表面官能团和缺陷位点数量逐渐减少,对NAD~+的吸附变弱,因而能促进NADH发生电催化氧化。     

电化学法制备石墨烯及其导电特性

采用电化学方法将石墨层电解剥离, 得到分散于电解质溶液的结构较为完整的石墨烯. 用透射电子显微镜和拉曼光谱分析了石墨烯的形貌和结构, 利用四探针法测定了石墨烯导电特性. 实验数据和理论拟合结果表明, 当100 K相似文献   

Synthesis of Nitrogen-Doped Graphene via Thermal Annealing Graphene with Urea

Chemical doping is an effective method to intrinsically modify the chemical and electronic property of graphene. We propose a novel approach to synthesize the nitrogen-doped graphene via thermal annealing graphene with urea, in which the nitrogen source can be controllably released from the urea by varying the annealed temperature and time. The doped N content and the configuration N as well as the thermal stabilities are also evaluated with X-ray photoelectron spectroscopy and Raman spectra. Electrical measurements indi-cate that the conductivity of doped graphene can be well regulated with the N content. The method is expected to produce large scale and controllable N-doped graphene sheets for a variety of potential applications.     

The Influence of Lateral Size and Oxidation of Graphene Oxide on Its Chemical Reduction and Electrical Conductivity of Reduced Graphene Oxide

The chemical reduction efficiencies of graphene oxide (GO) are critically important in achieving graphene-like properties in reduced graphene oxide (rGO). In this study, we assessed GO lateral size and its degree of oxidation effect on its chemical reduction efficiency in both suspension and film and the electrical conductivity of the corresponding rGO films. We show that while GO-reduction efficiency increases with the GO size of lower oxidation in suspension, the trend is opposite for film. FESEM, XRD, and Raman analyses reveal that the GO reduction efficiency in film is affected not only by GO size and degree of oxidation but also by its interlayer spacing (restacking) and the efficiency is tunable based on the use of mixed GO. Moreover, we show that the electrical conductivity of rGO films depends linearly on the C/O and Raman I_D/I_G ratio of rGO and not the lateral size of GO. In this study, an optimal chemical reduction was achieved using premixed large and small GO (L/SGO) at a ratio of 3:1 (w/w). Consequently, the highest electrical conductivity of 85,283 S/m was achieved out of all rGO films reported so far. We hope that our findings may help to pave the way for a simple and scalable method to fabricate tunable, electrically conductive rGO films for electronic applications.     

羧基化氧化石墨烯的血液相容性

氧化石墨烯的官能团修饰可促进氧化石墨烯与生物体液、聚合物基体等不同环境的融合. 通过超声法制备了氧化石墨烯, 并利用化学改性的方法, 将氧化石墨烯表面的羟基和环氧基转变为羧基. 红外图谱上羧基化氧化石墨烯(GeneO-COOH)的羧基振动明显, 峰强增大. GeneO-COOH的主要失重表现为羧基官能团缩合以一个水分子的形态释放失去结构水[OH2]. 复钙动力学曲线随着GeneO-COOH的浓度增加, 曲线上升趋势由陡峭趋于平缓, 当浓度为1.25 μg/mL时复钙时间延长了11 min, 平台期OD值降低了8.14 %; 在0.5~100 μg/mL浓度范围内溶血率均<5 %. GeneO-COOH比GeneO在同等低浓度下的抗凝血性能有一定程度的改善, 主要是因为带负电的羧基可直接络合凝血因子. 因此, 羧基修饰氧化石墨烯是提高血液相容性的有效手段, 羧基化氧化石墨烯可作为潜在的生物医用材料的填料.     

功能化氧化石墨烯的细胞相容性

采用改进的Hummers方法制备了纳米尺度的氧化石墨烯.对氧化石墨烯的表面进行羧基化,并连接上聚乙二醇(PEG)使其在细胞培养液中可溶并能稳定保存.采用透射电镜(TEM)、傅里叶变换红外(FTIR)光谱和zeta电位测量等对修饰后的氧化石墨烯的结构和功能进行了表征.体外细胞实验表明PEG修饰的氧化石墨烯在水中具有良好的可溶性,对A549细胞没有明显的毒性,在生物医药领域具有潜在的应用价值.     

Comparison of Adsorption of Proteins at Di erent Sizes on Pristine Graphene and Graphene Oxide

Using all-atom molecular dynamics (MD) simulations, we have investigated the adsorption stability and conformation change of different proteins on the surface of pristine graphene (PG) and graphene oxide (GO). We find that: (ⅰ) with the cooperation of the electrostatic interactions between proteins and oxygen-containing groups, GO shows better adsorption stability than PG; (ⅱ) the peptide loses its secondary structure on both PG and GO surface, and the α-helix structure of the protein fragment is partially broken on PG surface, but is well preserved on GO surface, while the secondary structure of globular protein has no distinct change on both PG and GO surface. In general, GO presents better biocompatibility than PG. Our results are of significant importance to understand the interactions between proteins and PG/GO and the applications of PG/GO in biotechnology and biomedicine.     

Comparative Studies on Electrocatalytic Activities of Chemically Reduced Graphene Oxide and Electrochemically Reduced Graphene Oxide Noncovalently Functionalized with Poly(methylene blue)

This study compares the electrocatalytic activities of chemically reduced graphene oxide (crGO) and electrochemically reduced graphene oxide (erGO), which are both noncovalently functionalized with a polyaromatic dye, poly(methylene blue) (polyMB), toward the oxidation of β‐nicotinamide adenine dinucleotide (NADH). PolyMB‐crGO and polyMB‐erGO composites were obtained via electropolymerization of methylene blue on crGO and GO modified glassy carbon (GC) electrodes, respectively. Cyclic voltammetry (CV) results indicate that these two types of integrated electrodes reveal different electrocatalytic activities. PolyMB‐crGO integrated electrode possesses lower catalytic oxidation potential, suggesting higher catalytic activity. The present study is helpful for the understanding and screening of graphene‐based advanced carbon nanomaterials for potential electrochemical applications.     

石墨烯薄膜的光化学还原制备与表征

采用光化学还原方法制备了图案化的石墨烯薄膜.研究了光还原氧化石墨烯薄膜(PRGO)的热稳定性和发光性质.热重分析(TGA)结果表明,光化学还原主要引起氧化石墨烯(GO)氧化基团的减少,而对GO内水含量影响较小;发光(PL)测试结果表明,不同激发条件下,PRGO的发光与GO相比表现出了不同的变化规律:在波长514 nm的光激发下,PRGO的发光强度比GO明显降低,同时伴随着发光峰峰位红移;而在波长830 nm的光激发下,PRGO的发光强度比GO略有增强,并且发光峰峰位无明显变化,此结果表明不同尺寸的碳团簇局域态(sp2C团簇)的光还原反应活性不同,这与GO特殊的能带结构密切相关.     

氧化石墨烯/聚合物复合水凝胶的研究进展

氧化石墨烯是一种具有单原子厚度的二维材料, 具有优异的力学性能和良好的水分散性, 其表面有大量的含氧官能团. 将氧化石墨烯引入水凝胶体系中可以提高水凝胶的机械性能, 丰富其刺激响应的类型. 目前, 氧化石墨烯水凝胶在高强度、 吸附、 自愈合及智能材料等很多领域均有出色的表现. 氧化石墨烯水凝胶的研究已有10年的历史. 本文总结了氧化石墨烯水凝胶的制备方法, 归纳了智能氧化石墨烯水凝胶在光热响应、 pH响应和自愈合3个方面的响应机理和研究进展, 并综合评述了其在高强度水凝胶、 生物医学、 智能材料和污水处理等方面的应用前景.     

FeVO4催化剂的原位电导研究

采用盐类固体研磨法制备了FeVO4催化剂,用原位电导方法测定了FeVO4催化剂在氧气 丙烷→氧气→丙烷连续变化气氛下的电导变化,确定其导电类型.以BET、XRD、H2-TPR等技术对催化剂进行表征,研究了其对丙烷氧化脱氢制丙烯反应的催化性能.     

Liquid Crystalline Microdroplets of Graphene Oxide via Microfluidics

Study of stable liquid crystal (LC) microdroplets is of great significance for LC dynamics in confined space or at topological surface.However,the fabrication of LC microdroplets with diverse shape without ionic gelation agents still remains challenging due to the fluid instability.Here,we utilize the microfluidic technology to prepare graphene oxide (GO) LC microdroplets with various morphologies based on the anomalous rheological property of GO aqueous dispersion.Different from LC of one-dimensional polymer,LC containing two-dimensional GO sheets exhibits considerable viscoelasticity and weak extensibility,resulting from the planar molecular conformation and the absence of intermolecular entanglements.The low extensibility ensures that GO aqueous suspension is discretized into monodispersed microdroplets ra-ther than thin thread in the microfluidic channels.The large viscoelasticity and ultra-long relaxation time of GO LC enable the diverse stable morphologies of microdroplets.The droplet morphology is well controlled from sphere to teardrop by modulating the competition between GO viscoelasticity and interfacial tension.The two-dimensional GO LC featuring unique rheological property provides a novel system for the micro-fluidic field,and corresponding topological stability enriches the LC dynamics and opens a new pathway for designing graphene-based materials.     

氧化石墨烯掺杂PEDOT:PSS作为空穴注入层对有机发光二极管发光性能的影响

研究了氧化石墨烯(GO)掺杂聚(3,4-亚乙二氧基噻吩):聚(苯乙烯磺酸) (PEDOT:PSS)作为空穴注入层对有机发光二极管发光性能的影响. 在PEDOT:PSS水溶液中掺入GO, 经过湿法旋涂和退火成膜后, 不仅提高了空穴注入层的空穴注入能力和导电率, 透光率也得到了相应的提高, 从而使得有机发光二极管(OLED)器件的发光性能得到了提升. 通过优化GO掺杂量发现, 当GO掺杂量为0.8%(质量分数)时, 空穴注入层的透光率达到最大值(96.8%), 此时获得的OLED器件性能最佳, 其最大发光亮度和最大发光效率分别达到17939 cd·m^-2和3.74 cd·A^-1. 与PEDOT:PSS 作为空穴注入层的器件相比, 掺杂GO后器件的最大发光亮度和最大发光效率分别提高了46.6%和67.6%.