Lewis Acid-Catalyzed Intramolecular [2 + 2] Cycloaddition of alpha-Ester-Substituted Conjugated Dienyl- and Trienylphosphonates. New Synthesis of Functionalized Cyclic Terpenoids

alpha-Ester-substituted 1,3-dienylphosphonates 7 and 8, prepared by the Knoevenagel condensation, underwent intramolecular [2 + 2] cycloaddition in the presence of Lewis acid to form bicyclo[4.2.0] (26-57% yield) and bicyclo[3.2.0]skeleton (14-38% yield), respectively. Similar treatment of homologous 1,3-dienylphosphonate 11 and 1,3,5-trienylphosphonate 12 resulted in the formation of ionone derivatives (30-94% yield). The intramolecular cycloaddition reaction was applicable to several conjugated dienes bearing an ester group.     

Tandem Gold/Silver‐Catalyzed Cycloaddition/Hydroarylation of 7‐Aryl‐1,6‐enynes to Form 6,6‐Diarylbicyclo[3.2.0]heptanes

Mixtures of [{PCy₂(o‐biphenyl)}AuCl] and AgSbF₆ catalyze the tandem cycloaddition/hydroarylation of 7‐aryl‐1,6‐enynes with electron‐rich arenes to form 6,6‐diarylbicyclo[3.2.0]heptanes in good yield under mild conditions. Experimental observations point to a mechanism involving gold‐catalyzed cycloaddition followed by silver‐catalyzed hydroarylation of a bicyclo[3.2.0]hept‐1(7)‐ene intermediate.     

Synthesis of Bicyclo[n. 2. 0]alkanediols

Interest in the synthetic potential of rearrangement reactions of fused-ring cyclobutanediols^1,2 has led us to develop a general method for the synthesis of bicyclo[n.2.0] alkanediols in which the hydroxyl group are located on adjacent carbon atoms at the bridgehead and in the cyclobutane ring (e.g. 1). We report here the application of our new synthetic method to the synthesis of bicyclo [4.2.0] octane-1,8-diol (2) and bicyclo[3.2.0]-heptane-1,7-diol (3).     

Rearrangements of the [2+2]-cycloadducts of DDQ and 2-ethynylpyrroles

The [2+2]-cycloadducts of DDQ and 2-ethynylpyrroles, upon ethanolysis (reflux, 15 min or room temperature, 24 h), rearrange from bicyclo[4.2.0]octadienediones to bicyclo[3.2.0]heptadienone- and cyclobutenyl-dihydrofuranone moieties in 55-83% yields, the former rearrangement being the major direction. Benzoquinone ring cleavage is regioselective to afford mostly bicyclo[3.2.0]heptadienone-pyrrole ensembles (85-90% selectivity) in 39-78% yields. The only exception is when the starting compounds contain an ethoxycarbonyl substituent and the pyrrole counterpart is a 4,5,6,7-tetrahydroindole fragment. In this case, the ratio of the rearrangement products is 1:1.2 in a total yield of 83%. An important feature of the dihydrofuranone pathway rearrangement is its 100% diastereoselectivity.     

Can relief of ring-strain in a cyclopropylmethyllithium drive the Brook rearrangement?

α-Cyclopropyl-α-trialkylsilyl alkoxides were formed either by addition of cyclopropyllithiums to acylsilanes or by addition of organolithiums to a cyclopropylformylsilane. [1,2]-Brook rearrangement led to α-silyloxy organolithiums which on warming underwent cyclopropane ring opening and [1,5]-retro-Brook rearrangement to yield γ-silyl ketones. Despite the favourability of the cyclopropane ring opening, the Brook rearrangement still required the presence of an anion stabilising group to proceed. β-Silylketones were similarly formed by Brook-retro-Brook rearrangement on warming acylsilanes with a vinyllithium.     

Copper(I)-catalyzed intramolecular asymmetric [2 + 2] photocycloaddition. Synthesis of both enantiomers of cyclobutane derivatives

[reaction: see text] A simple approach for asymmetric induction in Cu(I)-catalyzed [2 + 2] photocycloaddition, where asymmetric catalysts or chiral auxiliaries were inefficient, has been developed using the concept of chirality transfer from the readily available 2, 3-di-O-cyclohexylidine-(R)-(+)-glyceraldehyde. An anion-induced cleavage of the tetrahydrofuran ring of the resulting oxa-bicyclo[3.2.0]heptanes led to a convenient access to the synthetically useful cis-1,2-disubstituted cyclobutanes in enantiomerically pure form.     

Catalytic isomerization of 1,5-enynes to bicyclo[3.1.0]hexenes

The cycloisomerization of 1,5-enynes catalyzed by cationic triphenylphosphinegold(I) complexes produces bicyclo[3.1.0]hexenes. Substitution at all positions of the 1,5-enyne is tolerated, leading to a wide range of bicyclo[3.1.0]hexane structures, including those containing quaternary carbons. Substrates containing a 1,2-disubstituted olefin undergo stereospecific cycloisomerization (cis-olefin produces cis-cyclopropane, and trans-olefin gives trans-cyclopropane). Additionally, enantioenriched bicyclo[3.1.0]hexenes can be obtained from the gold(I)-catalyzed cycloisomerization of enantioenriched 1,5-enynes with excellent chirality transfer. The preparation of tricyclic systems is accomplished through a gold(I)-catalyzed tandem cycloisomerization-ring enlargement reaction.     

Catalytic Asymmetric Prins Bicyclization for the endo‐Selective Formation of 2,6‐dioxabicyclo[2.2.2]octanes

A new Lewis acid‐catalyzed endo‐selective Prins bicyclization of γ,δ‐unsaturated aldehydes or ketones with a broad range of aldehydes to dioxabicyclo[2.2.2]octanes is disclosed. When using a chiral BINOL‐derived N‐triflylphosphoramide (NTPA) as catalyst and glyoxylate esters as substrates, the cross‐dimerization afford functionalized bicyclic acetals with excellent diastereo‐ and enantioselectivities.     

Stereoselective synthesis of bicyclo[3.1.1]heptane derivatives via intramolecular photocycloaddition reaction

Optically active 1,3-bridged cyclobutanes 10 of the bicyclo[3.1.1]heptane ring system and 1,2-bridged cyclobutanes 11 of the bicyclo[3.2.0]heptane ring system were produced by UV irradiation of alpha,beta,gamma,delta-unsaturated esters 9a and 9c-f. The preference of endo-stereochemistry at C-6 bridged head was observed in cross-adducts 10. On the other hand, irradiation of conjugated dienol 9b led via only parallel cycloaddition to 1,2-bridged cyclobutane 11.     

Au(I)-catalyzed efficient synthesis of functionalized bicyclo[3.2.0]heptanes

An efficient Au(I)-catalyzed synthesis of highly strained and functionalized bicyclo[3.2.0]heptanes is developed. Subsequent couplings with various nucleophiles offer additional structural features/complexity. These one-pot, three-component reactions are proposed to proceed via a key 1,3-dipolar cycloaddition between a Au carbenoid-containing carbonyl ylide and ethyl vinyl ether.     

Intramolecular [2 + 2] photocycloaddition of alkenes incorporated in a carbohydrate template. Synthesis of enantiopure bicyclo[3.2.0]heptanes and -[6.3.0]undecanes

Intramolecular [2 + 2] photocycloaddition of alkenes with a furano sugar placed between them have been investigated under both copper(I)-catalyzed and sensitized conditions. The copper(I)-catalyzed photocycloaddition of the dienes 4a, 4b, and 4c led to unexpected formation of the thermodynamically less stable cis-syn-cis 4-5-5 tricyclic adducts 5a, 5b, and 5c, respectively. The sensitized photocycloaddition of the diene 14 also gave the cis-syn-cis adduct 15 showing that the copper(I) catalyst does not have any influence on the stereochemical course through coordination with the anomeric ring oxygen of the furano sugar. The identical stereochemical course observed under both catalyzed and sensitized photoaddition reactions have been attributed to be of steric origin. Bis(dienes) 25a and 25b, which gave an intractable mixture on copper(I)-catalyzed irradiation, underwent smooth photocycloaddition in the presence of benzophenone, and the resulting 1,2-divinyl cyclobutanes underwent spontaneous [3.3]-rearrangement at room temperature to produce bicyclo[6.3.0]undecanes 30a and 30b, respectively. This investigation provides an approach for the construction of enantiopure bicyclo[3.2.0]heptanes and -[6.3.0]undecanes.     

Total Synthesis of Notoamides F,I, and R and Sclerotiamide

The total synthesis of the natural indole alkaloids (+)‐notoamide F, I, and R and (?)‐sclerotiamide is described. The four heptacyclic compounds were synthesized in 10–12 steps in a convergent and highly stereoselective manner from the readily available Seebach acetal. Key steps of the synthesis include a stereoselective oxidative aza‐Prins cyclization to construct the bicyclo[2.2.2]diazaoctane, and a cobalt‐catalyzed radical cycloisomerization to create the cyclohexenyl ring.     

Total Synthesis of Notoamides F,I, and R and Sclerotiamide

The total synthesis of the natural indole alkaloids (+)‐notoamide F, I, and R and (−)‐sclerotiamide is described. The four heptacyclic compounds were synthesized in 10–12 steps in a convergent and highly stereoselective manner from the readily available Seebach acetal. Key steps of the synthesis include a stereoselective oxidative aza‐Prins cyclization to construct the bicyclo[2.2.2]diazaoctane, and a cobalt‐catalyzed radical cycloisomerization to create the cyclohexenyl ring.     

Biomimetic synthesis of the shimalactones

A biomimetic synthesis of shimalactone A and B is described. Its key features are an unprecedented acid-catalyzed cyclization of a dienyl beta-ketolactone and a Stille coupling/8pi-6pi electrocyclization cascade to create the oxabicyclo[2.2.1]heptane and bicyclo[4.2.0]octadiene, respectively. The synthesis is convergent and void of protecting groups.     

Titanium(IV) chloride-mediated intramolecular ring enlargement of methylenecyclopropanes with propargylic esters: a concise synthesis of bicyclo[4.2.0]oct-5-ene derivatives

Titanium(IV) chloride-mediated intramolecular ring enlargement of methylenecyclopropanes with propargylic esters has been described in this context, affording the corresponding chlorinated bicyclo[4.2.0]oct-5-ene derivatives in moderate to good yields under mild conditions. The E- and Z-methylenecyclopropanes could all be converted to the corresponding bicyclo[4.2.0]oct-5-enes with moderate to high diastereoselectivities.     

A stable silicon congener of highly strained bicyclo[3.2.0]hepta-1,3,6-triene

A silicon-containing fused bicyclic compound with a highly strained bridgehead double bond, 2,3,6,7-tetra-tert-butyl-4-(tert-butyldimethylsilyl)-5-(tert-butyldimethylsiloxy)-5-silabicyclo[3.2.0]hepta-1,3,6-triene (2), was synthesized quantitatively by the reaction of 1,2-bis-tert-butyl-4,4-bis(tert-butyldimethylsilyl)-4-silatriafulvene (3) with di-tert-butylcyclopropenone (4) at 80 degrees C. An X-ray crystallographic analysis for 2 not only confirmed a bicyclic structure having a silacyclopentadiene (silole) ring fused with a silacyclobutene ring but also the remarkable deformation around the double bonds; the sum of the bond angles around the unsaturated bridgehead carbon was 333 degrees . The strain energy of a model 5-silabicyclo[3.2.0]hepta-1,3,6-triene was calculated at the MP2/6-31+G(d,p)//B3LYP/6-31+G(d) level (30.2 kcal/mol) to be comparable to that for parent bicyclo[3.2.0]hepta-1,3,6-triene (30.7 kcal/mol). Despite the high steric strain, 2 was stable enough to be kept intact for several months in the air. The high stability is ascribed to the effective steric protection of the ring system by the bulky substituents.     

Light‐Induced Cycloaddition of 2,3‐Dihydro‐2,2‐dimethyl‐4H‐thiopyran‐4‐one (a 4‐Thiacyclohex‐2‐enone) to Alkenes and Dienes

The reactivity of (thiacyclic)‐2,3‐dihydro‐2,2‐dimethyl‐4H‐thiopyran‐4‐one ( 1a ) in light‐induced cycloadditions to furan ( F ), acrylonitrile ( AN ), or 2,3‐dimethylbut‐2‐ene ( TME ) is compared to that of (carbocyclic) 5,5‐dimethylcyclohex‐2‐enone ( 1b ). Whereas for the more‐flexible thiacycle, the efficiency of [2+2]‐photocycloadduct formation with AN or TME is generally much lower, the diastereoselectivity regarding the ring fusion in the bicyclo[4.2.0]octanes is quite similar for both enones. In contrast, 1a affords exclusively trans‐fused [4+2] cycloadducts with F , while 1b gives predominantly the corresponding cis‐fused products.     

Cycloadditions of 1-iminylphosphirane complexes with allenes

A cascade carbonylative ring expansion and [2+2]/[4+2] cycloaddition of strained 1-iminylphosphirane complexes with aryl allenes were reported.The carbonylative ring expansion of 1-iminylphosphirane complexes provides an azaphosphacyclohexone complex intermediate with a C=P double bond.The following [2+2] or dearomatic [4+2] cycloaddition of this intermediate with allenes is modulated by the aryl substituents on the imino carbon.The regioselective [2+2] cycloaddition with 1,1-diarylallene provides an entry to bicyclo[4.2.0]octan-4-one skeletons featuring a four-membered phosphacyclobutane moiety.While dearomatic [4+2] cycloaddition was preferred with less aromatic naphthalene and yielded octahydrochrysene skeleton containing heteroatoms.     

Molecular diversity from aromatics. A tandem oxidative dearomatization,cycloaddition and reactivity modulation in excited states: synthesis of tricyclo[5.3.1.0]undecanes and bicyclo[4.2.0]octanes from common precursors

Stereoselective route to tricyclo[5.3.1.0^1,5]undecane and bicyclo[4.2.0]octane ring systems present in the molecular structure of tricycloillicinone, cedrenoids and endiandric acid, elysiapyrones, respectively, is described. A tandem oxidative dearomatization of o-hydroxymethylphenol, π⁴s+π²s cycloaddition, reactivity modulation in excited state and ring-closing metathesis are the key features of our approach.     

Gold(I)-catalysed cycloisomerisation of 1,6-cyclopropene-enes

The gold(I)-catalysed cycloisomerisation of appropriately substituted 1,6-cyclopropene-enes proceeds through regioselective electrophilic ring opening of the three-membered ring to generate an alkenyl gold carbenoid that achieves the intramolecular cyclopropanation of the remote olefin. This strategy allows straightforward, highly efficient and diastereoselective access to a variety of substituted 3-oxa- and 3-azabicyclo[4.1.0]heptanes, as well as to bicyclo[4.1.0]heptan-3-ol derivatives. Since the isopropylidene group in the resulting cycloisomerisation products can be subjected to ozonolysis, 3,3-dimethylcyclopropenes behave as interesting surrogates for α-diazoketones.