C[sbnd]C Asymmetric Bond Formation Mediated by Optically Active Sulfoxides

Abstract

Highly stereoselective C[sbnd]C bond forming reactions can be performed with a variety of optically active sulfinyl derivatives to afford, after desulfurization, optically active sulfur-free products.     

Synthesis of all stereoisomers of sulfinylcalix[4]arenes

All four stereoisomers of p-tert-butylsulfinylcalix[4]arene [4(rccc), 4(rcct), 4(rctt), and 4(rtct)], arising from the disposition of the four sulfinyl groups with respect to the mean plane of the four bridging sulfur atoms, have been prepared via oxidation of p-tert-butylthiacalix[4]arene (2) or its tetra-O-benzyl ethers 5 of defined conformations. Thus, treatment of 2 with 4.4 molar equiv of NaBO(3).4H(2)O gave the rtct and rctt isomers in 27% and 17% yields, respectively, while oxidation of cone 5 (5(C)) and partial cone 5 (5(PC)) proceeded stereoselectively to give, after debenzylation of the resulting tetrasulfoxides 12 and 15, the rccc and rcct isomers in 56% and 28% yields, respectively, based on 5. The sulfinylcalix[4]arenes 4 were treated with iodomethane in the presence of a base to give the corresponding tetramethyl ethers 16, the structures of which in regard to the disposition of the sulfinyl groups and the conformation of the phenol units were determined by X-ray crystallography. Also reported is the synthesis of all four conformational isomers of tetra-O-benzyl ether of 2 (5(C), 5(PC), 5(1,2-A), and 5(1,3-A)).     

Reaction of ene-bis(phosphinylallenes): [2+2] versus [4+2] cycloaddition

Reaction of ene-bis(phosphinylallenes), derived from ene-bis(propargyl alcohols) and chlorodiphenylphosphine, was investigated. Benzene-bridged bis(phosphinylallenes) exclusively gave intramolecular [2+2] cycloadducts in the presence of dimethyl fumarate in sharp contrast to the reaction of benzene-bridged bis(sulfinylallenes), which gave the corresponding [4+2] cycloadducts. On the other hand, substituted ethylene- or five-membered heterocycle-bridged bis(phosphinylallenes) provided [4+2] cycloadducts. Reaction of benzene-bridged diallene bearing both a sulfinyl group and a phosphinyl group on the two allenyl groups was also described.     

Umpolung Reactivity of Ynamides: An Unconventional [1,3]‐Sulfonyl and [1,5]‐Sulfinyl Migration Cascade

A regioselective sulfonyl/sulfinyl migration cycloisomerization cascade of alkyne‐tethered ynamides is developed in the presence of XPhosgold catalyst. This reaction is the first example of a general [1,3]‐sulfonyl migration from the nitrogen center to the β‐carbon atom of ynamides, followed by umpolung 5‐endo‐dig cyclization of the ynamide α‐carbon atom to the gold‐activated alkyne, and final deaurative [1,5]‐sulfinylation. This process allows the synthesis of peripherally decorated unconventional 4‐sulfinylated pyrroles with broad scope from N‐propargyl‐tethered ynamides. In contrast, N‐homopropargyl‐tethered ynamides undergo intramolecular tetradehydro Diels–Alder reaction to provide 2,3‐dihydro‐benzo[f]indole derivatives. Control experiments and density‐functional theory studies were used to study the reaction pathways.     

Synthesis and antimalarial properties of 2,4-diamino-6-[(aryl)thio,sulfinyl, and sulfonyl]pyrido[3,2-d]pyrimidines

The synthesis and antimalarial activity of a series of 2,4-diamino-6-[(aryl)thio, sulfinyl and sulfonyl]pyrido-[3,2-d]pyrimidines is described. Nitration of 2,6-dichloropyridine provided the 3-nitro derivative which was converted to 6-chloro-3-nitro-2-pyridinecarbonitrile (V) with cuprous cyanide. Condensation of an aryl thiol with V gave the 6-arylthiopyridines VI which were reduced with iron in hydrochloric acid and condensed with chloroformamidine to give the 6-arylthiopyrido[3,2-d]pyrimidin-2,4-diamines X. Alternatively V was reduced to the amine VIII condensed with chloroformamidine and the resulting 6-chloropyrido[3,2-d]pyrimidine (IX) was treated with an arylthiol. Oxidation of X provided sulfinyl and sulfonyl analogs.     

Synthesis and chiroptical properties of ferrocene-[4]-helicenequinones: kinetic resolution of a planar-chiral diene

Both enantiomers of ferrocene [4]-helicenequinone 6, showing planar and helical chiralities, have been synthesized with very high optical purities using, as the key step, a kinetic resolution process between planar-chiral racemic ferrocene diene 2 and enantiopure sulfinyl benzoquinone (S)-3.     

Synthese von 2,4-Diamino-thieno[2,3-d]pyrimidin-Derivaten

Synthesis of 2,4-Diamino-thieno[2,3-d]pyrimidines Condensation of 2-aminothiophene-3-carbonitrile ( 4 ) with guanidine or sequential addition of CS₂ and NH₃ to 4 provides 2,4-diaminothieno[2,3-d]pyrimidine ( 7 ). This compound yields, after sequential addition of sec-BuLi and either [3-(trifluoromethyl)benzene]sulfenyl chloride ( 8 ) or the corresponding disulfide 9 , followed by acidic work up, 2,4-diamino-6-{[3-(trifluoromethyl)phenyl]thio}thieno[2,3-d]pyrimidine ( 10 ). In another approach, 2-amino-5-{[3-(trifluoromethyl)phenyl]thio}thiophene-3-carbonitrile ( 11 ) obtained from 4 and 8 is transformed to 10 by condensation with guanidine. Corresponding to the second route, 2,4-diamino-6-[(naphth-2-yl)thio]thieno-[2,3-d]pyrimidine ( 16 ) is synthesized. Oxidation of 10 with m-chloroperbenzoic acid gives 2,4-diamino-6-{[3-(tri-fluoromethyl)phenyl]sulfinyl}thieno[2,3-d]pyrimidine ( 13 ).     

Sulfoxide-induced stereoselection in [1,5]-sigmatropic hydrogen shifts of vinylallenes. A computational study

The sulfoxide-induced preference for a migrating trajectory in the vinylallene [1,5]-H sigmatropic shift (resulting in stereodefined trienes in the conceptual equivalent of torquoselectivity in electrocyclizations), originally reported by Okamura, has been computationally studied at the B3LYP/6-311++G(3df,2p)//B3LYP/6-31++G(d,p) level. The face selectivity this group induces in the [1,5]-H shift is enhanced by bulky geminal substituents and is not reproduced by any of the other (more than 20) substituents tested. Analysis of transition-state geometries or charges and evaluation of steric effects did not show any correlation with the preferences. The origin of this selectivity is thought to lie in a secondary orbital interaction (SOI) involving the termini of the pericyclic array and the sulfinyl group which is only observed for this substituent. This secondary orbital interaction, arising from the favorable energies of the orbitals involved, is enhanced in the transition structure due to a better orbital overlap (piC2-C3-->sigma*C1-S), which correlates with a piC2-C3-->sigma*C6-H SOI, which is more important in the transition structure, that weakens the C-H bond, thus lowering the energy of the corresponding transition structure.     

A practical route to enantiopure, highly functionalized seven-membered carbocycles and tetrahydrofurans: concise synthesis of (+)-nemorensic Acid

Highly diastereoselective thermal [5C+2C] intramolecular pyrone-alkene cycloadditions can be achieved by introducing a homochiral p-tolylsulfinyl group at a suitable position of the alkene. The resulting adducts can be readily desulfinylated to give optically active 8-oxabicyclo[3.2.1]octane derivatives. Interestingly, switching from a sulfinyl to a sulfonimidoyl group allows one to reverse the direction of the diastereofacial selectivity and thereby produces oxa-bridged carbocyclic systems enantiomeric to those obtained from the sulfinyl precursors. Cleavage of the oxa-bridge on the desulfurated adducts yields highly functionalized seven-membered carbocyclic derivatives in enantiopure form. Alternative cleavage of the seven-membered carbocycle provides enantiomerically enriched tetrahydrofurans. We have exploited this reaction pathway for the synthesis of the naturally occurring enantiomer of nemorensic acid.     

Addition Reactions of Sulfenyl and Sulfinyl Chlorides with 3‐Phenyl‐1‐azabicyclo[1.1.0]butane

The reactions of 3‐phenyl‐1‐azabicyclo[1.1.0]butane with α‐chlorosulfenyl chlorides and sulfinyl chlorides lead to the corresponding sulfenamides and sulfinamides, respectively, which possess an azetidine ring. It is proposed that a two‐step mechanism occurs involving an intermediate carbenium ion, which is formed by the addition of the electrophile at the N‐atom and cleavage of the N(1)? C(3) bond. The structures of 9b and 10b are established by X‐ray crystallography.     

Synthesis of [5'-13C]ribonucleosides and 2'-deoxy[5'-13C]ribonucleosides

The present efficient synthesis of [5'-13C]ribonucleosides and 2'-deoxy[5'-13C]ribonucleosides is characterized by the synthesis of the D-[5-13C]ribose derivative as an intermediate via the Wittig reaction of 4-aldehydo-D-erythrose dialkyl acetals with Ph3P13CH3I-BuLi to introduce the 13C label at the 5-position of a pentose. This was followed by the highly diastereoselective osmium dihydroxylation for the preparation of 2,3-di-O-benzyl-D-[5-13C]ribose dialkyl acetal and the cyclization from D-[5-13C]ribose dialkyl acetal derivatives to the alkyl D-[5-13C]ribofuranoside derivative by the use of LiBF(4). The obtained D-[5-13C]ribose derivative was converted into [5'-13C]ribonucleosides and subsequently into the corresponding 2'-deoxynucleosides.     

Synthesis of ammonium [14C]thiocyanate

Ammonium [¹⁴C]thiocyanate was prepared from potassium [¹⁴C]cyanide with a radiochemical yield of 90%. [¹⁴C]hydrocyanic acid, generated from potassium [¹⁴C]cyanide by sulphuric acid, reacts with aqueous ammonia and elemental sulphur in the presence of trace amounts of ammonium sulphide to yield ammonium [¹⁴C]thiocyanate.     

Asymmetric synthesis of pyrrolo[2,1-a]isoquinoline derivatives by 1,3-dipolar cycloadditions of stabilized isoquinolinium N-ylides with sulfinyl dipolarophiles

Enantiomerically pure pyrrolo[2,1-a]isoquinoline derivatives are obtained by 1,3-dipolar reactions of isoquinolinium azomethine ylides with enantiopure 3-p-tolylsulfinylacrylonitriles, tert-butyl (2E)-4,4-diethoxy-2-p-tolylsulfinylbut-2-enoate, and 5-ethoxy-3-p-tolylsulfinylfuran-2(5H)-ones. Reactions evolve through the anti conformation of the ylide with complete regioselectivity. The facial selectivity is completely controlled by the configuration of the sulfinyl sulfur for acyclic dipolarophiles, whereas it is high (dr 83/17 or 89/11) but controlled by the C-5 configuration for sulfinylfuranones. Complete endo selectivity is observed with cyclic dipolarophiles and substituted acrylonitriles, but it is low with butenoate. The sulfinyl group also exerts a positive influence on the dipolarophilic reactivity toward these ylides.     

Syntheses of 6-fluoro-7-piperazin-1-yl-9-cyclopropyl-2,3,4,9-tetrahydroisothiazolo[5,4-b]quinoline-3,4-dione and 6-fluoro-7-piperazin-1-yl-9-p-fluorophenyl-2,3,4,9-tetrahydroisothiazolo[5,4-b]quinoline-3,4-dione

The syntheses of 6-fluoro-7-piperazin-1-yl-9-cyclopropyl (or 9-p-fluorophenyl)-2,3,4,9-tetrahydroisothiazolo[5,4-b]quinoline-3,4-diones as well as novel synthesis of isothiazolo-3(2H)-one system are described. Key steps include the regiospecific displacement of a sulfinyl group and the amination of the resultant mercapto derivative followed by an intramolecular nucleophilic displacement cyclization reaction to generate the novel 2,3,4,9-tetrahydroisothiazolo[5,4-b]quinoline-3,4-dione nucleus.     

Functional [6]pericyclynes: synthesis through [14+4] and [8+10] cyclization strategies

Critical analysis of possible strategies for the synthesis of novel carbo-benzene derivatives suggests several [(18-n)+n] routes for the preparation of hexaoxy[6]pericyclyne precursors. Beyond the previously attempted [9+9] symmetrical scheme (n=9), the a priori most selective strategies are those for which n=1, 4, 7, 10, 13, and 16. They involve a cyclizing double-propargylation of a C(18-n) omega-bis-terminal-skipped oligoyne containing (19-n)/3 triple bonds with a C(n) omega-dicarbonyl-skipped oligoyne containing (n-1)/3 triple bonds. To complement the previously used [11+7] strategy, the [14+4] and [8+10] strategies were thus explored. They proved to be efficient, affording seven novel hexaoxy[6]pericyclynes corresponding to six different substitution patterns. These compounds were obtained in 7-15 steps as mixtures of stereoisomers. Thus, by using dibenzoylacetylene as the C(4) electrophile, a [14+4] strategy allowed the synthesis of two hexaphenyl representatives with two or four free carbinol vertices. This approach also afforded tetraphenyl representatives in which the two remaining carbinoxy vertices were substituted with either two alkynyl or one 4-anisyl and one 4-pyridyl groups. By using the hexacarbonyldicobalt complex of butynedial as the C(4) electrophile, a [14+4] strategy also allowed the isolation of a tetraphenylhexaoxy[6]pericyclyne with two adjacent unsubstituted carbinol vertices. A regioisomer with two opposite unsubstituted carbinol vertices was obtained through an [8+10] strategy and its oxidation afforded the corresponding pericyclynedione. Several attempts at synthesizing diphenylhexaoxy[6]pericyclynes with four unsubstituted carbinoxy vertices are described. Only an [8+10] strategy allowed the generation of a fragile diphenylhexaoxy[6]pericyclyne with four adjacent unsubstituted carbinoxy vertices, which could be partly characterized. These results show that the synthesis of the nonsubstituted hexahydroxy[6]pericyclyne, the ring carbo-mer of [6]cyclitol, is a difficult challenge.     

Transannular Hydrogen Bonding in Planar‐Chiral [2.2]Paracyclophane‐Bisamides

A series of [2.2]paracyclophane‐bisamide regioisomers and alkylated comparators were designed, synthesized, and characterized in order to better understand the transannular hydrogen bonding of [2.2]paracyclophane‐based molecular recognition units. X‐Ray crystallography shows that transannular hydrogen bonding is maintained in the solid‐state, but no stereospecific self‐recognition is observed. The assignment of both transannularly and intermolecularly hydrogen bonded N?H stretches could be made by infrared spectroscopy, and the effect of transannular hydrogen bonding on amide bond rotation dynamics is observed by ¹H‐NMR in nonpolar solvents. The consequences of transannular hydrogen bonding on the optical properties of [2.2]paracyclophane is observed by comparing alkylated and non‐alkylated pseudo‐ortho 4,12‐[2.2]paracyclophane‐bisamides. Finally, optical resolution of 4‐mono‐[2.2]paracyclophane and pseudo‐ortho 4,12‐[2.2]paracyclophane‐bisamides was achieved through the corresponding sulfinyl diastereoisomers for circular dichroism studies. Transannular hydrogen bonding in [2.2]paracyclophane‐amides allows preorganization for self‐complementary intermolecular assembly, but is weak enough to allow rapid rotation of the amides even in nonpolar solvents.     

Unusual pathways for metal-assisted C[bond]C and C[bond]P coupling reactions using allenylidenerhodium complexes as precursors

The rhodium allenylidenes trans-[RhCl[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] [R = Ph (1), p-Tol (2)] react with NaC(5)H(5) to give the half-sandwich type complexes [(eta(5)-C(5)H(5))Rh[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))] (3, 4). The reaction of 1 with the Grignard reagent CH(2)[double bond]CHMgBr affords the eta(3)-pentatrienyl compound [Rh(eta(3)-CH(2)CHC[double bond]C[double bond]CPh(2))(PiPr(3))(2)] (6), which in the presence of CO rearranges to the eta(1)-pentatrienyl derivative trans-[Rh[eta(1)-C(CH[double bond]CH(2))[double bond]C[double bond]CPh(2)](CO)(PiPr(3))(2)] (7). Treatment of 7 with acetic acid generates the vinylallene CH(2)[double bond]CH[bond]CH[double bond]=C=CPh(2) (8). Compounds 1 and 2 react with HCl to give the five-coordinate allenylrhodium(III) complexes [RhCl(2)[CH[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] (10, 11). An unusual [C(3) + C(2) + P] coupling process takes place upon treatment of 1 with terminal alkynes HC[triple bond]CR', leading to the formation of the eta(3)-allylic compounds [RhCl[eta(3)-anti-CH(PiPr(3))C(R')C[double bond]C[double bond]CPh(2)](PiPr(3))] [R' = Ph (12), p-Tol (13), SiMe(3) (14)]. From 12 and RMgBr the corresponding phenyl and vinyl rhodium(I) derivatives 15 and 16 have been obtained. The previously unknown unsaturated ylide iPr(3)PCHC(Ph)[double bond]C[double bond]C[double bond]CPh(2) (17) was generated from 12 and CO. A [C(3) + P] coupling process occurs on treatment of the rhodium allenylidenes 1, 2, and trans-[RhCl[[double bond]C[double bond]C[double bond]C(p-Anis)(2)](PiPr(3))(2)] (20) with either Cl(2) or PhICl(2), affording the ylide-rhodium(III) complexes [RhCl(3)[C(PiPr(3))C[double bond]C(R)R'](PiPr(3))] (21-23). The butatrienerhodium(I) compounds trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C[double bond]C(R)R'](PiPr(3))(2)] (28-31) were prepared from 1, 20, and trans-[RhCl[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] [R = CF(3) (26), tBu (27)] and diazomethane; with the exception of 30 (R = CF(3), R' = Ph), they thermally rearrange to the isomers trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C[double bond]C(R)R'](PiPr(3))(2)] (32, 33, and syn/anti-34). The new 1,1-disubstituted butatriene H(2)C[double bond]C[double bond]C[double bond]C(tBu)Ph (35) was generated either from 31 or 34 and CO. The iodo derivatives trans-[RhI(eta(2)-H(2)C[double bond]C[double bond]C[double bond]CR(2))(PiPr(3))(2)] [R = Ph (38), p-Anis (39)] were obtained by an unusual route from 1 or 20 and CH(3)I in the presence of KI. While the hydrogenation of 1 and 26 leads to the allenerhodium(I) complexes trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] (40, 41), the thermolysis of 1 and 20 produces the rhodium(I) hexapentaenes trans-[RhCl(eta(2)-R(2)C[double bond]C[double bond]C[double bond]C[double bond]C[double bond]CR(2))(PiPr(3))(2)] (44, 45) via C-C coupling. The molecular structures of 3, 7, 12, 21, and 28 have been determined by X-ray crystallography.     

A new approach to the synthesis of 1-oxaspiro[4.n]alkanes and tetrahydrofurans by the 1,5-CH insertion reaction of magnesium carbenoids

1-Alkoxy-1-[2-chloro-2-(p-tolylsulfinyl)ethyl]cycloalkanes were prepared from various cyclic ketones in good overall yields. Treatment of these cycloalkanes bearing a sulfinyl group with i-PrMgCl resulted in the formation of 1-oxaspiro[4.n]alkanes in high to quantitative yields via the 1,5-CH insertion reaction of generated magnesium carbenoid intermediates. When this procedure was commenced with acyclic ketones, multi-substituted tetrahydrofurans were obtained in up to a 96% yield. This procedure provides a new and good way for the synthesis of 1-oxaspiro[4.n]alkanes and tetrahydrofurans with the formation of a carbon–carbon bond between a carbenoid carbon and a non-activated carbon in high yields. The oxygen atom in the magnesium carbenoid intermediates was proved to act very important roles in the 1,5-CH insertion reaction.     

Translational isomerism in a [3]catenane and a [3]rotaxane

[structure: see text] Post-assembly covalent modification using Wittig chemistry of [2]rotaxane ylides, wherein NH(2)(+) centers in the dumbbell-shaped components are recognized by dibenzo[24]crown-8 (DB24C8) rings, has afforded a [3]catenane and a [3]rotaxane with a precise and synthetically prescribed shortage of DB24C8 rings. The nondegenerate pairs of translational isomers present in both of these interlocked molecular compounds provide the fundamental platform on which to construct sensory devices and nanochemomechanical systems.     

Mechanism of the conversion of inverted CB[6] to CB[6

Inverted cucurbit[n]urils (iCB[n]) form as intermediates during the synthesis of cucurbit[n]urils from glycoluril and formaldehyde in HCl (85 degrees C). Product resubmission experiments establish that the diastereomeric iCB[6] and iCB[7] are kinetic products that are less stable thermodynamically than CB[6] or CB[7] (>2.8 kcal mol(-1)). When iCB[6] or iCB[7] is heated under aqueous acidic conditions, a preference for ring contraction is noted in the formation of CB[5] and CB[6], respectively. Interestingly, under anhydrous acidic conditions ring size is preserved with iCB[6] delivering CB[6] cleanly. To establish the intramolecular nature of the iCB[6] to CB[6] conversion under anhydrous, but not aqueous, acidic conditions we performed crossover experiments involving mixtures of iCB[6] and its (13)C=O labeled isotopomer (13)C(12)-iCB[6]. An unusual diastereomeric CB[6] with a M?bius geometry (13) is proposed as a mechanistic intermediate in the conversion of iCB[6] to CB[6] under anhydrous acidic conditions. The improved mechanistic understanding provided by this study suggests improved routes to CB[n]-type compounds.