Rhodium-catalyzed dehydrocoupling of the sterically encumbered phosphine-borane adduct tBu(2)PH.BH(3): synthesis of the linear dimers tBu(2)PH-BH(2)-tBu(2)P-BH(3) and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl

The dehydrocoupling of the sterically hindered phosphine-borane adduct tBu(2)PH.BH(3) above 140 degrees C is catalyzed by the rhodium complexes [Rh(1,5-cod)(2)][OTf] or Rh(6)(CO)(16) to give the four-membered chain tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), which was isolated in 60% yield and characterized by multinuclear NMR spectroscopy, mass spectrometry, and elemental analysis. Thermolysis of 1 in the temperature range 175-180 degrees C led to partial decomposition and the formation of tBu(2)PH.BH(3). When the dehydrocoupling of tBu(2)PH.BH(3) was performed in the presence of [[Rh(mu-Cl)(1,5-cod)](2)] or RhCl(3) hydrate, the chlorinated compound tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) was formed which could not be obtained free of 1. The molecular structures of tBu(2)PH.BH(3), tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) together with 1 were determined by single-crystal X-ray diffraction studies.     

Investigation of the hydration process in 3CaO.Al(2)O(3)-CaSO(4) . 2H(2)O-plasticizer-H(2)O systems by X-ray diffraction

The development of the hydration process in 3CaO.Al(2)O(3)-CaSO(4) . 2H(2)O-H(2)O system is studied by X-ray diffraction in the presence of varying contents of new plasticizer admixtures belonging to the lignosulphonates class (calcium lignosuphonate-LSC) and condensates melamine formaldehyde sulfonated class-MSF (VIMC-11). The plasticizer admixtures were added in proportion of 0.1-1% solid substance. The influence of the plasticizer admixtures on the hydration process with increasing time is observed and it is shown to depend on the nature and content of the admixtures and the reaction time. The strong adsorption of admixtures on the surfaces on the anhydrous or partially hydrated particles of the system can explain the influence of the admixtures upon the kinetics of the hydration process retardation or acceleration. These plasticizer admixtures influence also the evolution of the hydrated compounds and forming of the hardening structure in the 3CaO.Al(2)O(3)-CaSO(4) . 2H(2)O-H(2)O system; their proportion in the system and the considered length of hardening are correlated. In the 3CaO.Al(2)O(3)-CaSO(4) . 2H(2)O-H(2)O system there are two different influences of the plasticizer admixtures upon the hydration process. One is a delaying action, as a result of plasticizer adsorption on the surface of the anhydrous and hydrated compound particles and another one is the intensifying action due to the stronger dispersion of the particles in aqueous medium.     

Basis sets for molecular interactions. 1. Construction and tests on (HF)2 and (H2O)2

Basis set superposition error (BSSE) remains one of the major difficulties besetting current ab initio calculations of molecular interactions. Despite the widespread notion that lowering of the BSSE to negligible magnitude requires extremely large basis sets, we show that simple modifications of basis sets of only moderate size (e.g., 6-31G**) can accomplish the same end at much reduced computational expense. These modifications include reoptimization of the orbital exponents within the framework of the relevant molecules, plus addition of a single diffuse shell of sp orbitals on nonhydrogen centers. Subsequent addition of a second set of d-functions further lowers the SCF BSSE, bringing it below 0.1 kcal/mol for both (HF)₂ and (H₂O)₂. It is notable that addition of the latter d-functions without prior reoptimization of the valence orbitals produces the opposite effect of an increase in the BSSE. Although the MP2 BSSE is also substantially decreased by the above modifications, it appears difficult to reduce this quantity below about 0.4 kcal/mol.     

Chemical reactions inside structured nano-environment: S(N)2 vs. E2 reactions for the F(-) + CH(3)CH(2)Cl system

A new receptor for S(N)2 transition states, named NPTROL, is proposed. This molecule has a cavity and four hydroxyl groups that are able to interact with ionic S(N)2 and E2 transition states. Its catalytic effect and selectivity was investigated through high level ab initio calculations using the fluoride ion plus ethyl chloride in DMSO solution as a model system. Calculations at the ONIOM[CCSD(T)/6-311+G(2df,2p)?:?MP2/BASIS1] level of theory and solvent effects, included through a continuum solvation model, indicate that NPTROL is able to catalyze the S(N)2 pathway and has an inverse effect on the E2 pathway. Inside the NPTROL cavity, the ΔG(?) for the S(N)2 transition state is 5.00 kcal mol(-1) lower than that for E2, and as a consequence this reaction becomes highly selective toward the S(N)2 product.     

Reactivity of the "yl"-bond in uranyl(VI) complexes. 1. Rates and mechanisms for the exchange between the trans-dioxo oxygen atoms in (UO2)2(OH)2 2+ and mononuclear UO2(OH)n 2-n complexes with solvent water

The stoichiometric mechanism, rate constant, and activation parameters for the exchange of the "yl"-oxygen atoms in the dioxo uranium(VI) ion with solvent water have been studied using 17O NMR spectroscopy. The experimental rate equation, (-->)v= k(2obs)[UO2(2+)]tot2/[H+]2, is consistent with a mechanism where the first step is a rapid equilibrium 2U(17)O2(2+) + 2H2O<==>(U(17)O2)2(OH)2(2+) + 2H+, followed by the rate-determining step (U(17)O2)2(OH)2(2+) + H2O<==>(UO2)2*(OH)2(2+) + H2(17)O, where the back reaction can be neglected because the (17)O enrichment in the water is much lower than in the uranyl ion. This mechanism results in the following rate equation (-->)v= d[(UO2)2(OH)2(2+)]/dt = k(2,2)[(UO2)2(OH)2(2+)] = k(2,2*)beta(2,2)[UO2(2+)]2/[H + ]2; with k(2,2) = (1.88 +/- 0.22) x 10(4) h(-1), corresponding to a half-life of 0.13 s, and the activation parameters DeltaH++ = 119 +/- 13 kJ mol-1 and DeltaS++ = 81 +/- 44 J mol(-1) K(-1). *Beta(2,)2 is the equilibrium constant for the reaction 2UO2(2+) + 2H2O<==>(UO2)2(OH)2(2+) + 2H+. The experimental data show that there is no measurable exchange of the "yl"-oxygen in UO2(2+), UO2(OH)+, and UO2(OH)4(2-)/ UO2(OH)5(3-), indicating that "yl"-exchange only takes place in polynuclear hydroxide complexes. There is no "yl"-exchange in the ternary complex (UO2)2(mu-OH)2(F)2(oxalate)2(4-), indicating that it is also necessary to have coordinated water in the first coordination sphere of the binuclear complex, for exchange to take place. The very large increase in lability of the "yl"-bonds in (UO2)2(OH)2(2+) as compared to those of the other species is presumably a result of proton transfer from coordinated water to the "yl"-oxygen, followed by a rapid exchange of the resulting OH group with the water solvent. "Yl"-exchange through photochemical mediation is well-known for the uranyl(VI) aquo ion. We noted that there was no photochemical exchange in UO2(CO3)3(4-), whereas there was a slow exchange or photo reduction in the UO2(OH)4(2-) / UO2(OH)5(3-) system that eventually led to the appearance of a black precipitate, presumably UO2.     

Structural description of the Na(2)B(4)O(7)-Na(3)AlF(6)-TiO(2) system. 1. IR and Raman study of the solidified melts

The pseudo-binary Na2B4O7-[Na3AlF6-TiO2]11 system has been investigated at room temperature by means of X-ray diffraction, IR, Raman, and UV-vis spectroscopies. Evolution of the different spectra with Na2B4O7 and TiO2 contents evidenced the breaking-up of the large borate rings in favor of small borate units, the diminution of the BIV fraction, and the partial substitution of oxygen by fluorine with the formation of oxyfluoride species. Two domains of compositions are described: a TiO2-rich region with 20-50% Na2B4O7 with the lowering of boron coordination and formation of Ti(O,F)6 units and a TiO2-poor region with 60-90% Na2B4O7 where the Na3AlF6 modifier behavior is predominant. The enhanced modifier effect of [Na3AlF6-TiO2]11 in comparison with pure Na3AlF6 on the vitreous network of Na2B4O7 consists of fluorine preference for binding to higher strength cations, Ti4+, over Al3+ and Na+ respectively, when TiO2 addition exceeds 5 wt %.     

Reaction dynamics simulations of the identity S(N)2 reaction H(2)O + HOOH(2)(+)--> H(2)OOH(+)+ H(2)O. Requirements for reaction and competition with proton transfer

Despite the fact that the transition structure of the gas phase S(N)2 reaction H(2)O + HOOH(2)(+)--> HOOH(2)(+)+ H(2)O is well below the reactants in potential energy, the reaction has not yet been observed by experiment. Variational transition state RRKM theory reveals a strong preference for the competing proton transfer reaction H(2)O + HOOH(2)(+)--> H(3)O(+)+ HOOH due to entropy factors. Born-Oppenheimer reaction dynamics simulations confirm these results. However, by increasing the collision energy to around 7.5 eV the probability for nucleophilic substitution increases relative to proton transfer. These observations are explained by the presence of the key common intermediate HOO(H)[dot dot dot]H-OH(2)(+) which leads to effective proton transfer, but can be avoided with increasing collision energy. However, the S(N)2 probability remains below 0.2 since successful passage through the TS requires optimum initial orientation of the reactants, excitation of the relative translational motion and good phase correlation between the O-O vibration and the motion of the incoming water.     

A homogeneous catalyst for selective O(2) oxidation at ambient temperature. diversity-based discovery and mechanistic investigation of thioether oxidation by the Au(III)Cl(2)NO(3)(thioether)/O(2) system.

A library of inorganic complexes with reversible redox chemistry and/or the ability to catalyze homogeneous oxidations by peroxides, including but not limited to combinations of polyoxometalate anions and redox-active cations, was constructed. Evaluation of library members for the ability to catalyze aerobic sulfoxidation (O(2) oxidation of the thioether, 2-chloroethyl ethyl sulfide, CEES) led to the discovery that a combination of HAuCl(4) and AgNO(3) forms a catalyst that is orders of magnitude faster than the previously most reactive such catalysts (Ru(II) and Ce(IV) complexes) and one effective at ambient temperature and 1 atm air or O(2). If no O(2) but high concentrations of thioether are present, the catalyst is inactivated by an irreversible formation of colloidal Au(0). However, this inactivation is minimal in the presence of O(2). The stoichiometry is R(2)S + (1)/(2)O(2) --> R(2)S(O), a 100% atom efficient oxygenation, and not oxidative dehydrogenation. However, isotope labeling studies with H(2)(18)O indicate that H(2)O and not O(2) or H(2)O(2) is the source of oxygen in the sulfoxide product; H(2)O is consumed and subsequently regenerated in the mechanism. The rate law evaluated for every species present in solution, including the products, and other kinetics data, indicate that the dominant active catalyst is Au(III)Cl(2)NO(3)(thioether) (1); the rate-limiting step involves oxidation of the substrate thioether (CEES) by Au(III); reoxidation of the resulting Au(I) to Au(III) by O(2) is a fast subsequent step. The rate of sulfoxidation as Cl is replaced by Br, the solvent kinetic isotope effect (k(H)(2)(O)/k(D)(2)(O) = 1.0), and multiparameter fitting of the kinetic data establish that the mechanism of the rate-limiting step involves a bimolecular attack of CEES on a Au(III)-bound halide and it does not involve H(2)O. The reaction is mildly inhibited by H(2)O and the CEESO product because these molecules compete with those needed for turnover (Cl(-), NO(3)(-)) as ligands for the active Au(III). Kinetic studies using DMSO as a model for CEESO enabled inhibition by CEESO to be assessed.     

Gold(I) Complexes with the nido-Diphosphino Ligand [7,8-(Ph(2)P)(2)-7,8-C(2)B(9)H(10)](-). Preparation of the First Metallocarborane Complex of this Ligand. Crystal Structures of [Au{(PPh(2))(2)C(2)B(9)H(10)}(PPh(3))].CH(2)Cl(2) and [Au(2){(PPh(2))(2)C(2)B(9)H(10)}(2){(PPh(2))(2)(CH(2))(3)}].3Me(2)CO

The reaction of [AuCl(PR(3))] with [1,2-(Ph(2)P)(2)-1,2-C(2)B(10)H(10)] in refluxing ethanol proceeds with partial degradation (removal of a boron atom adjacent to carbon) of the closo species to give [Au{(PPh(2))(2)C(2)B(9)H(10)}(PR(3))] [PR(3) = PPh(3) (1), PPh(2)Me (2), PPh(2)(4-Me-C(6)H(4)) (3), P(4-Me-C(6)H(4))(3) (4), P(4-OMe-C(6)H(4))(3) (5)]. Similarly, the treatment of [Au(2)Cl(2)(&mgr;-P-P)] with [1,2-(Ph(2)P)(2)-1,2-C(2)B(10)H(10)] under the same conditions leads to the complexes [Au(2){(PPh(2))(2)C(2)B(9)H(10)}(2)(&mgr;-P-P)] [P-P = dppe = 1,2-bis(diphenylphosphino)ethane (6), dppp = 1,3-bis(diphenylphosphino)propane (7)], where the dppe or dppp ligands bridge two gold nido-diphosphine units. The reaction of 1 with NaH leads to removal of one proton, and further reaction with [Au(PPh(3))(tht)]ClO(4) gives the novel metallocarborane compound [Au(2){(PPh(2))(2)C(2)B(9)H(9)}(PPh(3))(2)] (8). The structure of complexes 1 and 7 have been established by X-ray diffraction. [Au{(PPh(2))(2)C(2)B(9)H(10)}(PPh(3))] (1) (dichloromethane solvate) crystallizes in the monoclinic space group P2(1)/c, with a = 17.326(3) ?, b = 20.688(3) ?, c = 13.442(2) ?, beta = 104.710(12) degrees, Z = 4, and T = -100 degrees C. [Au(2){(PPh(2))(2)C(2)B(9)H(10)}(2)(&mgr;-dppp)] (7) (acetone solvate) is triclinic, space group P&onemacr;, a = 13.432(3) ?, b = 18.888(3) ?, c = 20.021(3) ?, alpha = 78.56(2) degrees, beta = 72.02(2) degrees, gamma = 73.31(2) degrees, Z = 2, and T = -100 degrees C. In both complexes the gold atom exhibits trigonal planar geometry with the 7,8-bis(diphenylphosphino)-7,8-dicarba-nido-undecaborate(1-) acting as a chelating ligand.     

Synthesis of 1(2H)-Isoquinolones. (Review)

Methods published over the last 10 years for the production of substituted 1(2H)-isoquinolones, including those involving the use of organometallic compounds, are discussed.     

3(2H)isoquinolones. 2. Studies on the structure and formation of aminonaphthols obtained in the preparation of 3(2H)isoquinolones

The reaction of a 2-acylphenylacetic acid derivative (I) with primary amines in glacial acetic acid produces novel, colorless aminonaphthols (III) which are isomeric with the brilliant yellow 3(2H)isoquinolones (II) obtained in the same reaction. A combination of chemical and spectral techniques allowed identification of the isomers as derivatives of 4-amino-2-naphthol. A plausible mechanism of formation of aminonaphthols versus 3(2H)isoquinolones is discussed and supported by chemical synthesis of N-substituted 2-aeylphenylacetamides (VIII) and a 1,4-dihydro-1-hydroxy-3(2H)isoquinolone derivative (IX).