THICKNESS-SHEAR AND THICKNESS-TWIST VIBRATIONS OF CIRCULAR AT-CUT QUARTZ RESONATORS

Exact solutions for free vibration frequencies and modes are obtained for thickness-shear and thickness-twist vibrations of unelectroded circular AT-cut quartz plates governed by the two-dimensional scalar differential equation derived by Tiersten and Smythe. Comparisons are made with experimental results and the widely-used perturbation solution by Tiersten and Smythe under the assumption of weak in-plane anisotropy. Our solution is found to be much closer to the experimental results than the perturbation solution. For the frequency of the fundamental thickness-shear mode, the error of the perturbation method is 0.4549%, significant in resonator applications.     

ENERGY TRAPPING OF THICKNESS-SHEAR AND THICKNESS-TWIST MODES IN A PARTIALLY ELECTRODED AT-CUT QUARTZ RESONATOR

The thickness-shear and thickness-twist vibrations of a finite and partially electroded AT-cut quartz resonator are investigated. The equations of anisotropic elasticity are used with the omission of the small elastic constant c 56 . An analytical solution is obtained using Fourier series from which the free vibration resonant frequencies, mode shapes, and energy trapping are calculated and examined.     

ELECTRICALLY FORCED THICKNESS-SHEAR VIBRATIONS OF QUARTZ PLATE WITH NONLINEAR COUPLING TO EXTENSION

We study electrically forced nonlinear thickness-shear vibrations of a quartz plate resonator with relatively large amplitude. It is shown that thickness-shear is nonlinearly coupled to extension due to the well-known Poynting effect in nonlinear elasticity. This coupling is relatively strong when the resonant frequency of the extensional mode is about twice the resonant frequency of the thickness-shear mode. This happens when the plate length/thickness ratio assumes certain values. With this nonlinear coupling, the thickness-shear motion is no longer sinusoidal. Coupling to extension also affects energy trapping which is related to device mounting. When damping is 0.01, nonlinear coupling causes a frequency shift of the order of 10^-6 which is not insignificant,and an amplitude change of the order of 10^-8. The effects are expected to be stronger under real damping of 10^-5 or larger. To avoid nonlinear coupling to extension, certain values of the aspect ratio of the plate should be avoided.     

基于沿程坐标积分模式颗粒流与结构物阵列相互作用的数值模拟

近年来, 由颗粒物质流动主导的泥石流、滑坡等自然灾害评估及其防护工作越来越受到人们的关注. 本文基于沿程坐标积分模式建立了陡峭地形条件结构物作用下颗粒流运动的数值模型, 可以较为准确地表征陡峭地形情形结构物影响下颗粒流的流态特征和运动过程, 尤其是相互作用过程中激波结构的形成与演化, 颗粒流的反射、绕射和爬升等动力效应. 通过数值模拟研究了颗粒流与不同分布密度四面体结构物阵列相互作用时的流态演化与堆积形貌, 提出了新型偏转效率无量纲指标, 结合流通效率, 定量评估了四面体结构物阵列对颗粒流流通距离和侧向铺展特征的影响. 结果表明, 单个四面体结构物对颗粒流的作用包括耗散作用和偏转作用两种模式, 其中偏转作用尤为显著; 结构物阵列对颗粒流产生综合的耗散和偏转作用, 通过多级作用形成系列的弓形激波耗散颗粒流能量, 通过偏转作用分隔和改变颗粒流路径, 增强耗散作用, 调控堆积形态, 可望对下游地区产生显著的防护效果.      

EFFECTS OF NONLINEARITY ON TRANSIENT PROCESSES IN AT-CUT QUARTZ THICKNESS-SHEAR RESONATORS

We study the effects of mechanical nonlinearity arising from large thickness-shear deformation on the transient process of an AT-cut quartz plate resonator. Mindlin's two-dimensional plate equation is used, from which a system of first-order nonlinear differential equations governing the evolution of the vibration amplitude is obtained. Numerical solutions by the Runge-Kutta method show that in common operating conditions of quartz resonators the nonlinear effect varies from noticeable to significant. As resonators are to be made smaller and thinner in the future with about the same power requirement, nonlinear effects will become more important and need more understanding and consideration in resonator design.     

PARALLEL FINITE ELEMENT ANALYSIS OF HIGH FREQUENCY VIBRATIONS OF QUARTZ CRYSTAL RESONATORS ON LINUX CLUSTER

Quartz crystal resonators are typical piezoelectric acoustic wave devices for frequency control applications with mechanical vibration frequency at the radio-frequency （RF） range. Precise analyses of the vibration and deformation are generally required in the resonator design and improvement process. The considerations include the presence of electrodes, mountings, bias fields such as temperature, initial stresses, and acceleration. Naturally, the finite element method is the only effective tool for such a coupled problem with multi-physics nature. The main challenge is the extremely large size of resulted linear equations. For this reason, we have been employing the Mindlin plate equations to reduce the computational difficulty. In addition, we have to utilize the parallel computing techniques on Linux clusters, which are widely available for academic and industrial applications nowadays, to improve the computing efficiency. The general principle of our research is to use open source software components and public domain technology to reduce cost for developers and users on a Linux cluster. We start with a mesh generator specifically for quartz crystal resonators of rectangular and circular types, and the Mindlin plate equations are implemented for the finite element analysis. Computing techniques like parallel processing, sparse matrix handling, and the latest eigenvalue extraction package are integrated into the program. It is clear from our computation that the combination of these algorithms and methods on a cluster can meet the memory requirement and reduce computing time significantly.     

流管声传播与膜结构相互作用的机理研究

以等价分布源方法为基础研究流管声传播与膜结构相互作用的机理. 根据广义格林函数 给出任意截面管道的通用模型. 并在此基础上研究了结构参数、流动马赫数、高阶模态波对 膜结构消声器降噪量及临界频率的影响. 此外,还讨论了流体介质对声波与膜片相互作 用的影响,可以看出膜结构消声器在水下也能得到广泛的应用.     

THICKNESS-SHEAR VIBRATION OF A RECTANGULAR QUARTZ PLATE WITH PARTIAL ELECTRODES

We study free vibration of a thickness-shear mode crystal resonator of AT-cut quartz. The resonator is a rectangular plate partially and symmetrically electroded at the center with rectangular electrodes. A single-mode, three-dimensional equation governing the thickness-shear displacement is used. A Fourier series solution is obtained. Numerical results calculated from the series show that there exist trapped thickness-shear modes whose vibration is mainly under the electrodes and decays rapidly outside the electrodes. The effects of the electrode size and thickness on the trapped modes are examined.     

INTERACTION BETWEEN A SCREW DISLOCATION AND A PLASTIC ZONE OF AN ARBITRARY SHAPE

A plastic deformation zone near a screw dislocation is treated as an equivalent trans- formation inclusion by means of the Eshelby inclusion theory.A closed-form solution for deter- mining the interaction between a screw dislocation and a plastically deformed zone of an arbitrary shape is obtained by using the solution between a dislocation and an equivalent transformation inclusion.     

数值研究激波与旋涡的相互作用

从非定常形式的Euler方程出发,数值模拟了运动激波与旋涡相互作用的非定常流动过程。为保证激波具有较高的分辨率,采用对称型TVD格式进行了数值计算。结果表明。这样可以有效地模拟流场中一些复杂的流动现象,如激波变形、激波分叉和三波点的形成,以及旋涡结构的变化过程等,并与已有的实验流动显示相符良好。同时,也是对TVD格式求解这类问题的一次初步尝试。     

压电体中裂纹与孤立电偶极子的相互作用

研究压电体裂纹与电偶极子的相互作用,得到问题的闭合解,包括应力-电位移场,裂纹张开位移和电势差,以及裂尖应力强度因子.结果表明,电偶极子的方向对裂纹场的影响可由压电体各向异性方向函数表示;当电偶极子位于裂尖附近时,在原点取在裂尖的局部极坐标系中电偶极子位置的极角对裂尖场的影响可由各向异性方向函数表示,电偶极子引起的裂尖应力强度因子与其距裂尖的距离的-3/2次幂成正比.     

红层泥岩水岩作用特征研究

红层是红色陆相沉积为主的碎屑沉积岩层,岩性以砂岩、泥岩、粉砂岩和页岩为主。该类岩层多为软岩与硬岩相间,呈互层状产出,层间结合力弱。受区域构造影响,岩层扭曲褶皱强烈,多中高倾角,结构面发育,有泥化现象。红层中的泥岩具有透水性弱、亲水性强,遇水易软化、塑变,抗风化能力弱,易崩解等特性。特别是遇水后岩体及结构面抗剪强度大幅度降低,并且具有遇水膨胀、失水收缩的工程特性。水岩作用对边坡的影响主要有,结构面遇水泥化导致楔形体失稳,泥岩塑性变形引起边坡蠕变,同时红层还具有很强的崩解性,边坡开挖后发生崩解等现象。     

气固两相边界层中固粒与拟序结构相互作用的研究

本文对气固两相边界层中固体颗粒与拟序结构的相互作用进行了研究，建立了基于速度修正的双向耦合模型，提出了计算固粒对流场反作用的新方法以及大大减少计算量的快速涡方法，并据此得到了边界气固两相之间的相互作用结果。     

界面下主微裂纹间干涉的研究

涉及两相正交各向异性体界面下裂纹间干涉问题的研究.多裂纹问题被分解为只含单裂纹的子问题,利用位错理论和裂面应力自由条件,列出一组可数值求解位错密度函数的奇异积分方程,从而求得应力强度因子.     

AN APPLICATION OF THE CBS SCHEME IN THE FLUID-MEMBRANE INTERACTION

提出了一种不可压缩流体与弹性薄膜耦合问题的特征线分裂有限元解法. 首先, 给出了流场和结构的控制方程. 然后, 对流场、结构以及流固耦合的具体求解过程进行了描述. 其中, 流场求解采用改进特征线分裂方法和双时间步方法相结合的隐式求解方式, 并利用艾特肯加速法对每个时间步的迭代收敛过程进行了加速处理;结构部分的空间离散和时间积分分别采用伽辽金有限元方法和广义方法, 并通过牛顿迭代法对所得非线性代数方程组进行了求解;流场网格的更新采用弹簧近似法;流场、结构两求解模块之间采用松耦合方式.最后, 采用该方法对具有弹性底面的方腔顶盖驱动流问题进行了求解, 验证了算法的准确性和稳定性.此外, 计算结果表明艾特肯加速法可以显著地提高双时间步方法迭代求解过程的收敛速度.     

入射涡与圆柱相互作用的数值模拟

本文用快速涡方法对入射涡与圆柱的相互作用进行了数值模拟,观察到了入射涡在圆柱表面上诱导的二次分离和三次分离现象。二次涡的产生,与入射涡配对,改变了它们的运动轨迹。二次涡是入射涡“回跳”现象的主要原因。本文还对不同入射涡强度及相互位置作了计算,并分析了不同参数对涡运动轨迹的影响。这些现象与涡的无粘圆柱绕流有着本质的差异。     

徐州市城市生态系统与环境的相互作用

本文研究了徐州市城市生态系统与自然环境之间的相互作用。自然环境限制了城市生态系统的功能类型、布局及运营方式,城市生态系统则以取出、输入和综合作用三种方式改造环境,并诱发了一些城市病害,导致城市生态系统暂时局部的运营紊乱。     

入射涡与圆柱相互作用的数值模拟

本文用快速涡方法对入射涡与圆柱的相互作用进行了数值模拟,观察到了入射涡在圆柱表面上诱导的二次分离和三次分离现象。二次涡的产生,与入射涡配对,改变了它们的运动轨迹。二次涡是入射涡“回跳”现象的主要原因。本文还对不同入射涡强度及相互位置作了计算,并分析了不同参数对涡运动轨迹的影响。这些现象与涡的无粘圆柱绕流有着本质的差异。     

脆性固体中内聚断裂点阵列的扩张行为及间隔影响

建立一个一维模型, 分析脆性材料中多个等间距虚拟断裂点在均匀应变率拉伸作用下的扩张断裂过程. 采用线弹性波动方程组描述材料内部动力学关系, 采用线性内聚力断裂模型(linear cohesive fracture model)描述虚拟断裂点的扩张行为, 根据初始均匀拉伸条件和虚拟裂纹等间距假设给出定解条件, 形成一个初边值问题. 采用Laplace变换方法求解控制方程组, 得到虚拟断裂点扩张过程中内聚应力随时间变化曲线, 以及发生完全断裂的临界时间和单位裂纹体(碎片)的临界膨胀位移. 在此基础上分析应变率和裂纹间距对碎裂发生时间及单元裂纹体临界膨胀位移的影响. 在假设脆性材料在自然碎裂过程中单元裂纹体临界膨胀位移最小的基础上,进一步研究应变率对碎片尺度的影响.