CONTACT ANALYSIS FOR FIBER-REINFORCED, DELAMINATED LAMINATES WITH KINEMATIC NONLINEARITY

A macro-micro analytical approach for the anti-penetrating contact problem at the interfaces of the delamination in symmetrically cross-plied,fiber-reinforced rectangular laminates is presented in this paper.The laminate is simply supported and subjected to a uniform transverse load with a through-width delamination buried at the center position.A contact factor is defined to characterize the contact efect and determined using the micro-mechanics of composite material.By analyzing the kinematics of nonlinear deformation at the interfaces of the delamination,the contact force is derived.Asymptotic solutions from perturbation analysis are presented.It is found that the deformation of the laminate involves a global deflection and a local buckling.The antipenetrating contact efects are characterized by the local buckling and are intrinsic properties of the laminates,relying only on the geometries of the delamination and the material properties.Parametric analyses show that the location and size of the contact areas and the distribution of the contact force are hardly afected by the aspect ratio.     

A MULTI-COUPLED FINITE ELEMENT ANALYSIS OF RESISTANCE SPOT WELDING PROCESS

A two-dimensional axisymmetric finite element model is developed to analyze the transient thermal and mechanical behaviors of the Resistance Spot Welding (RSW) process using commercial software ANSYS. Firstly a direct-coupled electrical-thermal Finite Element Analysis (FEA) is performed to analyze the transient thermal characteristics of the RSW process. Then based on the thermal results a sequential coupled thermo-elastic-plastic analysis is conducted to determine the mechanical features of the RSW process. The thermal history of the whole process and the temperature distribution of the weldment are obtained through the analysis. The mechanical features, including the distributions of the contact pressure at both the faying surface and the electrode-workpiece interface, the stress and strain distributions in the weldment and their changes during the RSW process, the deformation of the weldment and the electrode displacement are also calculated.     

Contact force and mechanical loss of multistage cable under tension and bending

A theoretical model for calculating the stress and strain states of cabling structures with different loadings has been developed in this paper. We solve the problem for the first-and second-stage cable with tensile or bending strain. The contact and friction forces between the strands are presented by two-dimensional contact model. Several theo-retical models have been proposed to verify the results when the triplet subjected to the tensile strain, including contact force, contact stresses, and mechanical loss. It is found that loadings will affect the friction force and the mechanical loss of the triplet. The results show that the contact force and mechanical loss are dependent on the twist pitch. A shorter twist pitch can lead to higher contact force, while the trend of mechanical loss with twist pitch is compli-cated. The mechanical loss may be reduced by adjusting the twist pitch reasonably. The present model provides a simple analysis method to investigate the mechanical behaviors in multistage-structures under different loads.     

Investigation on Normal Dynamic Contact Characteristics of Mechanical Interface of Machine Tools

The dynamic contact characteristics of mechanical interface significantly impact the performance of machine tools.The static contact behaviors of mechanical interface have been studied.However,most mechanical interfaces are exposed to dynamic load.It is necessary to study the dynamic contact characteristics of mechanical interface.A normal dynamic microcosmic contact model is built using the statistical method,and the interactional effects of adjacent asperities are considered.The influences of the normal preload,vibrational frequency and displacement amplitude on normal contact stiffness and damping of mechanical interface are revealed.The predicted contact stiffness and damping of mechanical interface are verified by a series of simulations and experiments.     

ANALYSIS OF NANOBRIDGE TESTS

This paper analyzes nanobridge tests with consideration of adhesive contact deformation, which occurs between a probe tip and a tested nanobeam, and deformation of a substrate or template that supports the tested nanobeam.Analytical displacement-load relation, including adhesive contact deformation and substrate deformation, is presented here for small deformation of bending.The analytic results are confirmed by finite element analysis.If adhesive contact deformation and substrate deformation are not considered in the analysis of nanobridge test data, they might lead to lower values of Young＇s modulus of tested nanobeams.     

Effective enhanced model for a large deformable soft pneumatic actuator

Soft pneumatic actuators have been widely used for implementing sophisticated and dexterous movements,due to numerous fascinating features compared with their rigid counterparts.Relatively speaking,modeling and analysis of an entire soft pneumatic actuator considering contact interaction between two adjacent air chambers is extremely rare,which is exactly what we are particularly interested in.Therefore,in order to establish an accurate mechanical model and analyze the overall configuration and stress distribution for the soft pneumatic actuator with large deflection,we consider the contact interaction of soft materials rather than hard materials,to produce an effective enhanced model for soft contact of a large deformable pneumatic actuator.In this article,a multiple-point contact approach is developed to circumvent the mutual penetration problem between adjacent air chambers of the soft actuator that occurs with the single-point contact approach employed in linear elastic rigid materials.In contrast to the previous simplified rod-based model that did not focus on contact interaction which was adopted to clarify the entire deformation of the actuator,the present model not only elaborates nonlinear large deformation and overall configuration variations,but also accurately delineates stress distribution law inside the chamber structure and the stress concentration phenomenon.By means of a corresponding static experiment,a comparison of the simulation results with experimental data validates the effectiveness and accuracy of this model employing a multiple-point contact approach.Excellent simulation of the actual bending deformation of the soft actuator is obtained,while mutual penetration is successfully circumvented,whereas the model with single-point contact cannot achieve those goals.Finally,as compared with the rod-based model,the results obtained using the proposed model are more consistent with experimental data,and simulation precision is improved.     

Micromechanical analysis of the behavior of stiff clay

Cementations formed in geological timescale are observed in various stiff clays.A micromechanical stress strain model is developed for modeling the effect of cementation on the deformation behavior of stiff clay.The proposed approach considers explicitly cementations at intercluster contacts,which is different from conventional model.The concept of inter-cluster bonding is introduced to account for an additional cohesion in shear sliding and a higher yield stress in normal compression.A damage law for inter-cluster bonding is proposed at cluster contacts for the debonding process during mechanical loading.The model is used to simulate numerous stress-path tests on Vallericca stiff clay.The applicability of the present model is evaluated through comparisons between the predicted and the measured results.In order to explain the stress-induced anisotropy arising from externally applied load,the evolution of local stresses and local strains at inter-cluster planes are discussed.     

ELASTO-PLASTIC CONSTITUTIVE MODEL OF SOIL-STRUCTURE INTERFACE IN CONSIDERATION OF STRAIN SOFTENING AND DILATION

The behavior of soil-structure interface plays a major role in the definition of soil-structure interaction. In this paper a bi-potential surface elasto-plastic model for soil-structure interface is proposed in order to describe the interface deformation behavior,including strain softening and normal dilatancy. The model is formulated in the framework of generalized potential theory,in which the soil-structure interface problem is regard as a two-dimensional mathematical problem in stress field,and plastic state equations are used to replace the traditional field surface. The relation curves of shear stress and tangential strain are fitted by a piecewise function composed by hyperbolic functions and hyperbolic secant functions,while the relation curves of normal strain and tangential strain are fitted by another piecewise function composed by quadratic functions and hyperbolic secant functions. The approach proposed has the advantage of deriving an elastoplastic constitutive matrix without postulating the plastic potential functions and yield surface. Moreover,the mathematical principle is clear,and the entire model parameters can be identified by experimental tests. Finally,the predictions of the model have been compared with experimental results obtained from simple shear tests under normal stresses,and results show the model is reasonable and practical.     

FRACTURE ASSESSMENT OF AN INTERFACE CRACK BETWEEN TWO DISSIMILAR MAGNETOELECTROELASTIC MATERIALS UNDER HEAT FLOW AND MAGNETOELECTROMECHANICAL LOADINGS

A magnetoelectrically permeable interface crack between two semi-infinite magnetoelectroelastic planes under the action of a heat flow and remote magnetoelectromechanical loadings is considered, where the assumption of frictionless contact between two dissimilar halfplanes is adopted. Not only the solutions of the interface crack problem are presented in an explicit form, but also the general condition for the transition from a perfect thermal contact of two magnetoelectroelastic bodies to their separation is given.     

DIGITAL IMAGE CORRELATION STUDIES FOR FATIGUE MICRO-CRACK INITIATION AND PROPAGATION OF NI BASED SUPERALLOY

An experimental investigation on the mechanical mechanisms of fatigue micro-crack initiation and propagation of a nickel-based superalloy is presented. By coupling digital image correlation method and scanning electron microscope, the fatigue residual strain distribution at the grain scale has been obtained. The results showed that there is a trend of accumulation for the residual strain. Micro-cracks are more likely to initiate in or near the areas with particularly large residual strain, and propagate along the large-strain paths.     

Analysis of phase transformation from austenite to martensite in NiTi alloy strips under uniaxial tension

Phase transformation from austenite to martensite in NiTi alloy strips under the uniaxial tension has been observed in experiments and numerically simulated as a localized deformation.This work presents an analysis using the theory of phase transfor- mation.The jump of deformation gradient across the interface between two phases and the Maxwell relation are considered.Governing equations for the phase transformation are derived.The analysis is reduced to finding the minimum value of the loading at which the governing equations have a unique,real and physically acceptable solution.The equa- tions are solved numerically and it is verified that the unique solution exists definitely. The Maxwell stress,the stresses and strains inside both anstenite and martensite phases, and the transformation-front orientation angle are determined to be in reasonably good agreement with experimental observations.     

CONTINUUM VOID NUCLEATION MODEL FOR Al-Mg ALLOY SHEET BASED ON MEASURED PARTICLE DISTRIBUTION

Void nucleation within measured particle fields of an aluminum alloy is investigated to develop a continuum nucleation model which reflects nucleation at the individual particle scale. A nucleation model for heterogeneous particle distributions is synchronized with the continuum model of Chu and Needleman using the average nucleation strain. The parameters in the continuum model are identified from the particle fields and are evaluated over the range of stress states observed in sheet metal forming. The synchronized continuum nucleation model achieves very good agreement with the nucleation trends for three measured particle fields in uniaxial tension, plane strain, and equal-biaxial tension.     

An eigenelement method and two homogenization conditions

Under inspiration from the structure-preserving property of symplectic difference schemes for Hamiltonian systems, two homogenization conditions for a representative unit cell of the periodical composites are proposed, one condition is the equivalence of strain energy, and the other is the deformation similarity. Based on these two homogenization conditions, an eigenelement method is presented, which is characteristic of structure-preserving property. It follows from the frequency comparisons that the eigenelement method is more accurate than the stiffness average method and the compliance average method.     

Elastic-viscoplastic field at mixed-mode interface crack-tip under compression and shear

For a compression-shear mixed mode interface crack, it is difficult to solve the stress and strain fields considering the material viscosity, the crack-tip singularity, the frictional effect, and the mixed loading level. In this paper, a mechanical model of the dynamic propagation interface crack for the compression-shear mixed mode is proposed using an elastic-viscoplastic constitutive model. The governing equations of propagation crack interface at the crack-tip are given. The numerical analysis is performed for the interface crack of the compression-shear mixed mode by introducing a displacement function and some boundary conditions. The distributed regularities of stress field of the interface crack-tip are discussed with several special parameters. The final results show that the viscosity effect and the frictional contact effect on the crack surface and the mixed-load parameter are important factors in studying the mixed mode interface crack- tip fields. These fields are controlled by the viscosity coefficient, the Mach number, and the singularity exponent.     

TWO-DIMENSIONAL STRESS WAVE ANALYSIS IN INCOMPRESSIBLE ELASTIC SOLIDS

Two-dimensional stress waves in a general incompressible elastic solid are investigated.First,basic equations for simple waves and shock waves are presented for a general strain energy function.Then the characteristic wave speeds and the associated characteristic vectors are deduced.It is shown that there usually exist two simple waves and two shock waves.Finally,two examples are given for the case of plane strain deformation and antiplane strain deformation,respectively.It is proved that,in the case of plane strain deformation,the oblique reflection problem of a plane shock is not solvable in general.     

An explicit finite volume element method for solving characteristic level set equation on triangular grids

Level set methods are widely used for predicting evolutions of complex free surface topologies,such as the crystal and crack growth,bubbles and droplets deformation,spilling and breaking waves,and two-phase flow phenomena.This paper presents a characteristic level set equation which is derived from the two-dimensional level set equation by using the characteristic-based scheme.An explicit finite volume element method is developed to discretize the equation on triangular grids.Several examples are presented to demonstrate the performance of the proposed method for calculating interface evolutions in time.The proposed level set method is also coupled with the Navier-Stokes equations for two-phase immiscible incompressible flow analysis with surface tension.The Rayleigh-Taylor instability problem is used to test and evaluate the effectiveness of the proposed scheme.     

MESO-MECHANICAL ANALYSIS OF SHAPE MEMORY ALLOY REINFORCED SMART STRUCTURE WITH DAMAGE

The mechanical behaviors of shape memory alloy (SMA) wires reinforced smart structure with damage were analyzed through the variational principle, a governing equation for the structure was derived, mathematical expressions for the meso-displacement field, stress-strain field of typical element with damage were presented, and a failure criterion for interface failure between SMA wires and matrix was established under two kinds of actuation which are dead-load and temperature, where the temperature is included in effective free restoring strain. In addition, there are some other composing factors in the failure criterion such as the interface properties, dynamical properties of SMA, initial debonding length L-l etc. The results are significant to understand structural strength self-adapted control and failure mechanism of SMA wires reinforced smart structure with damage.     

Carrier fringe method of moiré interferometry for tiny strain measurements in micro-field

In this paper, we demonstrate a new optical method for tiny strain measurements based on the principle of carrier fringes of moire interferometry. A cross-line grating with frequency of 1200 lp/mm is replicated on the specimen surface, and the strain can be deduced from the changes in carrier fringes before and after the deformation of an object. Four coherent laser beams are used to obtain the carrier fringe patterns of field U and V. Both theoretical analysis and numerical simulation indicate that the ideal accuracy of strain can be controlled within a range of ±1με. Case study of a plane extension experiment shows that the measurement accuracy of strain can be controlled within the range of ±10με. The average strain values of every row of field U and every column of field V can be obtained by using this method, and approximated strain of every pixel in the whole-field can be further acquired, and thus it is possible to measure tiny strains occurred in a micro-field. The technology in this paper can provide comprehensive information for analyzing related mechanical content in the field of MEMS.     

Indentation of a compressible soft electroactive half-space: Some theoretical aspects

We theoretically study the indentation response of a compressible soft electroactive material by a rigid punch. The half-space material is assumed to be initially subjected to a finite deformation and an electric biasing field. By adopting the linearized theory for incremental fields, which is established on the basis of a general nonlinear theory for electroelasticity, the appropriate equations governing the perturbed infinitesimal elastic and electric fields are derived particularly when the material is subjected to a uniform equibiaxial stretch and a uniform electric displacement. A general solution to the governing equations is presented, which is concisely expressed in terms of four quasi-harmonic functions. By adopting the potential theory method, exact contact solutions for three common perfectly conducting rigid indenters of flat-ended circular, conical and spherical geometries can be derived, and some explicit relations that are of practical importance are outlined.     

A MODEL CONSIDERING HYDROSTATIC STRESS OF POROUS NITI SHAPE MEMORY ALLOY

Based on the micromechanical method and thermodynamic theory,a constitutive model for the macroscopic mechanical behavior of porous NiTi shape memory alloy is presented.The hydrostatic stress is considered for porous NiTi according to the transformation function of dense NiTi.The present model takes account of the tensile-compressive asymmetry of NiTi,and can degenerate to model dense material.Numerical calculations,which only need material parameters of dense NiTi,are conducted to investigate the nonlinear and hysteretic strain of porous NiTi,and the predicted results are in good agreement with the corresponding experiments.