叔丁基取代二苯并-18-冠-6的合成

以二甘醇和邻苯二酚为原料制得二苯并-18-冠-6;以多聚磷酸为催化剂和溶剂,将二苯并-18-冠-6与叔丁醇反应实现叔丁基化;利用正庚烷重结晶对叔丁基化反应产物进行纯化,得到4,4′-二叔丁基二苯并-18-冠-6和4,5′-二叔丁基二苯并-18-冠-6两种对称的二叔丁基二取代苯并冠醚产品.利用红外光谱和核磁共振谱表征了二叔丁基二取代苯并冠醚产物的结构。     

微波辅助二苯并-18-冠-6的合成

以邻苯二酚与二甘醇二取代物为原料,氢氧化钾为碱和模板剂,在微波辅助下,采用“一锅煮”法合成二苯并-18-冠-6。 经单因素及正交实验考察了原料、溶剂、时间、温度和功率对反应收率的影响,获得了最佳的工艺条件：以邻苯二酚与二氯乙醚为原料,二甲亚砜为溶剂,反应温度70 ℃,时间60 min,功率500 W,收率可达46.3%。     

二环己基并18冠6的制备方法

二苯并-18－冠-6;二环己基并18冠6的制备方法     

顺、反异构的二羟基二苯并-18-冠-6的方便合成

用顺、反二氨基二苯并－18－冠－6与氟硼酸和亚硝酸正戊酯反应制得相应的芳基重氮氟硼酸盐，经水解，以较好的收率制得了二羟基二苯并－18－冠－6，后者是合成功能高分了的有用单体。     

癸二酸-二苯并-18-冠-6共聚物的合成

脂肪族二元羧酸与二苯并 １８ 冠 ６在多聚磷酸中进行酰基化反应，可以制得酮型冠醚聚合物，二元酸的分子链长度会影响聚合反应的难易程度．对聚合反应条件进行优化控制，可以制得分子量高、成膜性能良好的癸二酸 二苯并 １８ 冠 ６共聚物．     

二维网状冠醚配合物——苯并15-冠-5、二苯并18-冠-6与Na_2[Pt(SCN)_6]配合物的合成与结构

合成了苯并 15 冠 5、二苯并 18 冠 6与Na2 [Pt(SCN) 6]的配合物 :[Na(B15 C 5 ) ]2 [Pt(SCN) 6](1) ,[Na(DB18 C 6 ) ]2 [Pt(SCN) 6](2 ) ,并通过元素分析、红外光谱、单晶X射线衍射进行了表征 .1为单斜晶系 ,空间群P2 1/c,a =1.0 974(5 )nm ,b =1.5 187(7)nm ,c=1.36 32 (6 )nm ,β =96 .40 7(7)°,V =2 .2 5 6 8(18)nm3 ,Z =2 ,Dcalcd=1.746g/cm3 ,F(0 0 0 ) =1184,R1=0 .0 35 7,wR2 =0 .0 86 8.2为三斜晶系 ,空间群P1- ,a =1.2 5 0 0 (3)nm ,b =1.2 82 5 (3)nm ,c=1.934 2 (4 )nm ,α=10 6 .82 (3)° ,β =10 2 .5 1(3)° ,γ =10 3.0 4(3)°,V =2 .75 6 2nm3 ,Z =2 ,Dcalcd=1.5 79g/cm3 ,F(0 0 0 ) =1316 ,R1=0 .0 36 4,wR2 =0 .0 771.配合物分别由两个 [Na(B15 C 5 ) ]+ ,[Na(DB18 C 6 ) ]+ 配阳离子和一个[Pt(SCN) 6]2 -配阴离子组成 .配阳离子和配阴离子通过Na—N键形成二维网状结构     

4,4′-二胺甲基联苯搭桥的二苯并-18-冠-6环状二聚体的合成

在高度稀释条件下 ,二酰氯 (1)与二氨基二苯并 18 冠 6 (2 )反应 ,以高收率生成大环二酰胺 (3) ,3在甲苯溶剂中用SMEAH[二 (2 甲氧乙氧基 )二氢化钠铝 ]还原得到目标化合物——— 4,4′ 二胺甲基联苯搭桥的二苯并 18 冠 6环状二聚体 (4 ) .在吡啶溶剂中 4与 [6 0 ]富勒烯有弱的π 电子给体 -受体相互作用 .     

二苯并-18-冠-6-硝化产物异构体的分离及顺式化合物的结构测定

在改进的条件下,二苯并-18-冠-6硝化反应的产率达90％以上。提出一种分离二硝基二苯并-18-冠-6的顺、反异构体的方法。反应产物经元素分析和红外光谱鉴定,异角X射线衍射法测定了顺式二硝基二苯并-18-冠-6的晶体结构。晶体空间群为P2_1/n,α=15.95i(7),b=20.411(9),c=8.173(4),β=101.09(4)°,Z=4。结构用直接法解出,R=0.067。     

氯甲基化-二苯并-14-冠4的合成

以邻苯二酚和1,3-二溴丙烷为原料,高产率(50.24％)地制备了二苯并-14-冠-4(1);1在多聚甲醛和浓盐酸存在下与四丁基溴化胺反应,合成了氯甲基化-二苯并-14-冠4,其结构经1H NMR和IR表征.     

二维网状冠醚配合物——苯并15-冠-5、二苯并18-冠一6与Na2[Pt(SCN)6]配合物的合成与结构

合成了苯并15-冠-5、二苯并18-冠-6与Na2[Pt(SCN)6]的配合物:[Na(B1S-C-5)]2[Pt(SCN)6] (1),[Na(DB18-C-6) ]2[Pt(SCN)6] (2),并通过元素分析、红外光谱、单晶X射线衍射进行了表征.1为单斜晶系,空间群P21/c,a=1.0974(5) nm,b=1.5187(7)nm,c=1.3632(6)nm,β= 96.407(7)°,V=2.2568(18)nm3,Z=2,Dcalcd=1.746g/cm3,F(000)=1184,R1=0.0357,wR2=0.0868.2为三斜晶系,空间群 P1,a=1.2500(3)nm,b=1.2825(3)nm,c = 1.9342(4) nm,α = 106.82(3)°,β= 102.51(3)°,γ= 103.04(3)°,V= 2.7562 nm3,Z = 2,Dcalcd = 1.579 g/cm3,F(000) = 1316,R1 =0.0364,wR2 = 0.0771.配合物分别由两个[Na(B15-C-5)]+,[Na(DB18-C-6)] + 配阳离子和一个[Pt(SCN)6]2-配阴离子组成.配阳离子和配阴离子通过Na-N键形成二维网状结构.     

Dibenzo-18-crown-6 modified with kojic acid fragments

Diazonium salts were prepared by diazotization of 4′-amino-, 4′,4″-, and 4′,5″-diaminodibenzo-18-crown-6. Their coupling products with kojic acid (5-hydroxy-2-hydroxymethyl-γ-pyrone) were synthesized for the first time: 4′-(6-aza-5-hydroxy-2-hydroxymethyl-γ-pyronyl)-, 4′,4″-di-(6-aza-5-hydroxy-2-hydroxymethyl-γ-pyronyl)-, and 4′,5″-di-(6-aza-5-hydroxy-2-hydroxymethyl-γ-pyronyl)-dibenzo-18-crown-6. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 415–416, September–October, 2006.     

New Derivatives of Dibenzo-18-crown-6 with Salsolidine and Salsoline Fragments

New derivatives of dibenzo-18-crown-6 were prepared by condensing 4,4(5)-dibenzo-18-crown-6-dicarboxylic acid dichloride with salsolidine and salsoline. The structures of these compounds were proved by PMR and IR spectral methods.     

Acylation of Dibenzo-18-crown-6 with Alkali-metal Acetates in Polyphosphoric Acid

The acylation of dibenzo-18-crown-6 by lithium, sodium, and potassium acetates in polyphosphoric acid was studied. Complexes of dibenzo-18-crown-6 with the acetates were obtained. A new method is proposed for the production of mono- and diacetyldibenzo-18-crown-6 by the reaction of dibenzo-18-crown-6 complexes with metal acetates in polyphosphoric acid. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1146–1149, August, 2005.     

Synthesis and crystal structure of ammonium (picrate) (dibenzo-18-crown-6)

NH₄(Pic)(DB18C6) (Pic=picrate and DB18C6=dibenzo-18-crown-6), (C₂₆H₃₀N₄O₁₃) FW 606.56, arthorhombic,Pmn2₁,a=26.045(5),b=12.055(3),c=8.982(3) Å,V=2820(1) ų,Z=4,D _c =1.429 g/cm³, CuK, =1.54184 Å, (CuK)=9.5 cm^–1,F(000)=1272,T=298 K. The structure has been refined toR=0.0475 for 2617 unique observed reflections. In the lattice the 1:1 complex exists as a 2:2 dimer in which the crown are coupled through the Pic anions and NH₄ ⁺ cations. The asymmetric unit consists of two independent half crown ethers of which two opposite O atoms are on the mirror plane, two half ammonium cations of which the N and two H atoms are also on the mirror plane while the Pic anion is in a general position. Relative to each other, the corwn ethers are shifted by about 7.3 Å alongb and 1 Å alongc. The 1:1 sandwich of NH₄ with DB18C6 and Pic on dimerisation becomes a club pseudo-sandwich with three phenyl rings on either side of the mirror plane, thus forming a nearly parallel stack with a 3.6 Å inter-ring distance. The NH₄ ions hold the structure; two H atoms on the mirror plane are hydrogen-bonded to the opposite oxygens of the crown located on the purely aliphatic part of the ring (2.10(1), 2.06(3) and 2.26(3), 2.05(1) Å) for the two independent crowns, respectively, while the other two H atoms form mirror-related bifurcated hydrogen bonds with the phenoxide oxygen (1.99(1) and 2.01(1) Å) and theo-nitrogen oxygen (2.44(2) and 2.34(1) Å) of the picrates. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82037 (29 pages)     

二苯并-18-冠-6在交联聚乙烯醇微球表面的固载化

通过氯甲基化反应,将冠醚二苯并-18-冠-6(DBC)转变为氯甲基化的冠醚(CMDBC),使交联聚乙烯醇(CPVA)微球表面的羟基与CMDBC之间发生亲核取代反应,从而实现冠醚的固栽化,制得了固载有冠醚的功能微球DBC-CPVA.在建立了冠醚DBC固载量测定方法(溴百里香酚蓝-固相萃取法)的基础上,重点研究了主要因素对DBC固栽化过程的影响规律.结果表明:反应温度与溶剂性质对DBC在CPVA微球上的固载化反应有较大的影响,在70℃极性较强的N,N-二甲基甲酰胺(DMF)溶剂中,可制得冠醚DBC固载量为1.72 mmol/g的DBC-CPVA功能微球.     

二苯并-18-冠-6的氯甲基化及其在交联聚乙烯醇微球表面的固载化

在Lewis酸催化剂存在下,1,4-二氯甲氧基丁烷对冠醚二苯并-18-冠-6(1)进行氯甲基化修饰使其转变成氯甲基化冠醚(2),其结构经1HNMR,13C NMR,IR及MS表征。2与交联聚乙烯醇(CPVA)微球表面的羟基发生亲核取代反应实现冠醚的固载化,制得固载有冠醚的功能微球(3)。实验结果表明,1的氯甲基化反应易于进行,在两个苯环上分别发生了对称的氯甲基化反应,2为对称的四取代产物。通过2的氯甲基与CPVA的羟基之间的亲核取代反应,1可容易地化学固载到CPVA表面。     

Synthesis of Bis(2,2-benzimidazolyl)dibenzo-18-crown-6

A method has been developed for the introduction of benzimidazole substituents into the dibenzo-18-crown-6 molecule by condensation of its 4′,4″(5″)-diacetyl derivative with ortho-phenylenediamine. Increasing the length of the hydrocarbon chain of the acyl substituent or replacing Ac by CSNH₂ led to a decrease in the yield of the desired product. No product was formed when Ac was replaced by COOH or CN. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, 1388–1390, September, 2005.     

Stabilities in Water of Alkali Metal Ion Complexes with Dibenzo-24-crown-8 and Dibenzo-18-crown-6 and Their Transfer Activity Coefficients from Water to Nonaqueous Solvents

Stability constants K _ML for the 1:1 complexes of Na⁺, K⁺, Rb⁺, and Cs⁺ with dibenzo-24-crown-8 (DB24C8) and dibenzo-18-crown-6 (DB18C6) in water have been determined by a capillary electrophoretic technique at 25°C. The K _ML sequence is Na⁺ < K⁺ < Rb⁺ < Cs⁺ for DB24C8 and Na⁺ < K⁺ > Rb⁺ > Cs⁺ for DB18C6. Compared with DB18C6, DB24C8 exhibits higher selectivity for K⁺ over Na⁺, but lower selectivity for K⁺, Rb⁺, and Cs⁺. To evaluate the solvation of the complexes in water, their transfer activity coefficients sH₂O between polar nonaqueous solvents and water have been calculated. The sH₂O values provide the following information: interactions with water of the metal ions and of the crown-ether oxygens are greatly reduced upon complexation and the complexes undergo hydrophobic hydration in water; the character of each alkali metal ion in solvation is more effectively masked by DB24C8 than by DB18C6, because of the larger and more flexible ring structure of DB24C8. Solvent effects on the complex stabilities are discussed on the basis of the sH₂O values.