Tunable optical parametric oscillator based on a KTP crystal,pumped by a pulsed Ti<Superscript>3+</Superscript>:Al<Subscript>2</Subscript>O<Subscript>3</Subscript> laser

We present the characteristics of an optical parametric oscillator based on a KTP crystal, pumped with noncritical phase matching by a pulsed Ti³⁺:Al₂O₃ laser, tunable in the range 677–970 nm. Tunable generation of signal and idler waves is obtained in the ranges 1030–1390 nm and 2690–3050 nm respectively. The efficiency of conversion of the pump to the signal wave is ≈23%, which for pulses of duration ≈8 nsec ensures an energy in the range 1.0–11.5 mJ. The width of the emission spectrum for the signal wave is within the range 0.8–1.8 nm and is predominantly determined by the linewidth of the Ti³⁺:Al₂O₃ pump laser. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 351–356, May–June, 2007.     

Ultra-sharp α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoflakes: growth mechanism and field-emission

We report the synthesis of single-crystalline α-Fe₂O₃ nanoflakes from a simple Fe–air reaction within the temperatures range of 260–400 °C. The nanoflakes synthesized at the lowest temperature (260 °C) in this work show an ultra-sharp morphology: 5–10 nm in thickness, 1–2 μm in length, 20 nm in base-width and around 5 nm at the tips; successfully demonstrate the promising electron field emission properties of a large-scaled α-Fe₂O₃ nanostructure film and exhibit the potential applications as future field-emission (FE) electron sources and displays (FEDs). The formation and growth of α-Fe₂O₃ nanostructures were discussed based on the surface diffusion mechanism. PACS 79.60.Jv; 79.70.+q; 77.84.Bw     

Synthesis and characterization of mono-dispersed Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Er<Superscript>3+</Superscript>-coated SiO<Subscript>2</Subscript> nanoparticles by co-precipitation process

In this paper, a facile co-precipitation process for preparing mono-dispersed core–shell structure nanoparticles is reported. The 110 nm SiO₂ cores coated with an yttrium aluminum garnet (Y₃Al₅O₁₂) layer doped with Er³⁺ were synthesized and the influence of the concentration ratio of [urea]/[metal ions] on the final product was investigated. The structure and morphology of samples were characterized by the X-ray powder diffraction, Fourier transform IR spectroscopy and transmission electron microscopy, respectively. The results indicate that a layer of well-crystallized garnet Y₃Al₅O₁₂:Er³⁺ were successfully coated on the silica particles with the thickness of 20 nm. The near infrared and upconversion luminescent spectra of the SiO₂@Y₃Al₅O₁₂:Er³⁺ powders further confirm that a Y₃Al₅O₁₂:Er³⁺ coating layer has formed on the surface of silica spherical particles.     

Spinel-type ZnSb<Subscript>2</Subscript>O<Subscript>4</Subscript> nanowires and nanobelts synthesized by an indirect thermal evaporation

Uniform zinc antimoniate (ZnSb₂O₄) nanowires and nanobelts with a spinel structure were synthesized by an indirect thermal evaporation method in air. The as-synthesized ZnSb₂O₄ nanowires and nanobelts are single crystalline, usually several tens of microns in length. The diameter of the nanowires is about 20 nm; the thickness and the width of the nanobelts are about 15 nm and 60 nm, respectively. Most of the nanowires and nanobelts grow along the [001] direction. A possible formation mechanism is also proposed to account for the growth of these ZnSb₂O₄ nanobelts and nanowires. PACS 61.46.+w; 81.07.-b     

Microwave-induced solid-state synthesis of TiO<Subscript>2</Subscript>(B) nanobelts with enhanced lithium-storage properties

A fast and economical route based on an efficient microwave-induced solid-state process has been developed to synthesize metastable TiO₂(B) nanobelts with widths of 30–100 nm and lengths up to a few micrometers on a large scale. This new method reduces the synthesis time for the preparation of TiO₂(B) nanobelts to less than half an hour, allowing the screening of a wide range of reaction conditions for optimizing and scaling up the production and facilitating the formation of metastable phase TiO₂(B). The as-formed TiO₂(B) nanobelts exhibit enhanced lithium-storage performances, compared with the TiO₂(B) product obtained by the conventional heating. This study provides a new way for large-scale industrial production of high-quality metastable TiO₂(B) nanostructures. The products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy.     

UV-protection properties of electrospun polyacrylonitrile nanofibrous mats embedded with MgO and Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

This article describes the ultraviolet (UV) protection of MgO and Al₂O₃ nanoparticles embedded electrospun polyacrylonitrile (PAN) nanofibrous mats. UV radiation is a harmful part of sunlight and prolonged exposure to it can cause serious skin damages. In this research, nanofibrous mats consisting of nanofibers with different diameters containing different amounts of MgO, Al₂O₃, MgO Plus, and Al₂O₃ Plus nanoparticles were produced, and their UV-protection was measured. The specific surface area of MgO, MgO Plus, Al₂O₃, and Al₂O₃ Plus nanoparticles was 230, 600, 275, and 550 m²/g, respectively. The mean diameter of electrospun PAN nanofibers embedded with metal oxide nanoparticles was in the range of 665–337 nm. The results showed that the UV-protection (shielding) capability of the mats strongly depends on fiber diameter; in fact a thin mat of nanofibers has a much stronger UV-protection in comparison to a thicker mat composed of regular fibers. UV transmission is reduced as a result of embedding MgO and Al₂O₃ nanoparticles in the electrospun PAN nanofibrous mats. MgO Plus and Al₂O₃ Plus show higher UV-protection than MgO and Al₂O₃.     

Fabrication and laser performance of highly transparent Nd:YAG ceramics from well-dispersed Nd:Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanopowders by freeze-drying

Well-dispersed Nd:Y₂O₃ powders with uniform particle size of about 60 nm were synthesized from freeze-dried precursors. Highly transparent 2 at.% Nd:YAG ceramics were fabricated from the as-synthesized Nd:Y₂O₃ powders and commercial Al₂O₃ powders by vacuum sintering at 1,750 °C for 5 h. Phase evolution, microstructures, and spectroscopic properties of the Nd:YAG transparent ceramics were investigated. Freeze-drying played an important role in the synthesis of high-quality Nd:Y₂O₃ nanosized powders, which were essential for the fabrication of highly transparent Nd:YAG ceramics. Optical transmittance of a 3-mm thick sample reached 82% in the wavelength range of 200–900 nm. 5.23 W output power was obtained with 14.3 W diode laser pumping, giving a slope efficiency of 36.5%.     

Electromagnetic wave absorption properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> octahedral nanocrystallines in gigahertz range

Large-scale octahedral Fe₃O₄ nanocrystallines with crystalline size of 100−500 nm were synthesized by a facile solvent-thermal method for electromagnetic wave application. The Fe₃O₄ nanocrystallines showed a higher saturation magnetization (M _s ) value of 86.8 emu/g and larger coercivity (H _cj ) value of 255 Oe than that of magnetite polycrystallines because of their good crystallization and dispersion. The epoxy resin composites with 40 vol% Fe₃O₄ powders provided good electromagnetic wave absorption performance (RL < −20 dB) in the range of 2.0–4.3 GHz over the absorber thicknesses of 3.5–6.8 mm. A minimum RL value of −47 dB was observed at 3.1 GHz with a thickness of 4.8 mm.     

Multiple-wavelength lasing by multiform self-frequency conversion in Nd<Superscript>3+</Superscript>-doped La<Subscript>2</Subscript>CaB<Subscript>10</Subscript>O<Subscript>19</Subscript> crystals

The self-sum-frequency process was firstly demonstrated in Nd³⁺-doped La₂CaB₁₀O₁₉ (LCB) crystal. In addition, simultaneous participation of the fundamental laser in multi-self-frequency conversion including the self-frequency doubling was reported. Emissions at five different wavelengths (525, 529, 533.6, 1050 and 1069 nm) were simultaneously obtained. The output power of the three green visible lasers (525, 529 and 533.6 nm) generated by multi-self-frequency-conversion of the fundamental laser is up to 26.64 mW, and the light-light conversion efficiency is up to 4.85%. The lasers at 525 and 529 nm are very close to the green primary color G (526.3 nm) defined by the 1964CIERGB system, which has potential applications in laser-based high brightness display. The large frequency differences of 4–6 THz between 525 and 529 nm, 529 and 533.6 nm, as well as 1050 and 1069 nm, are also potential useful in generating THz waves by difference frequency generation (DFG) technique in a nonlinear optical (NLO) crystal.     

Temperature-controlled synthesis of Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> nanobelts and nanosheets

We have investigated the effect of growth temperature on structural morphology and photoluminescence (PL) properties of as-synthesized gallium oxide (Ga₂O₃) nanostructures. The products consisted of Ga₂O₃ nanobelts and nanosheets (i.e. wider nanobelts), which had monoclinic crystalline structures. The average width of structures grown at 1000 °C was relatively greater than those at 800 °C, revealing that higher temperature favored the formation of nanosheets. PL measurements of 800 °C- and 1000 °C-grown samples indicated that both samples exhibited a broad emission band peaked around the blue-light region, while only the 800 °C-grown sample showed a red peak. PACS 81.07.-b; 81.05.Je; 61.10.Nz; 68.37.Hk; 68.37.Lp     

Electrical properties of Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>-based composite systems

Composite electrolytes are well-known multiphase systems and exhibit maxima in the conductivity at certain second-phase concentration. An attempt has been made to investigate a number of sodium sulfate (Na₂SO₄)-based composite systems. The dispersoids that have been used are MgO, Al₂O₃, and SiO₂. The samples have been characterized using impedance spectroscopy, X-ray diffraction, and differential scanning calorimetry. The maximum conductivity has been observed for MgO dispersed system, and the percolation threshold has been observed at 30-mol% dispersoid, MgO concentration. Interestingly, two maxima have been observed in case of the Na₂SO₄–SiO₂ and Na₂SO₄–Al₂O₃ composite systems. In the Na₂SO₄–SiO₂ system, the first maximum occurs at lower concentration, i.e., in the range between 10 and 20 mol%, whereas the second occurs at the 40-mol% dispersoid concentration. For the Na₂SO₄–Al₂O₃ system, although slightly indistinguishable, two peaks in the conductivity vs composition plot have been observed around 12- and 30-mol% Al₂O₃ concentrations.     

Spectroscopic Properties and Energy Transfer Analysis of Tm<Superscript>3+</Superscript>-Doped BaF<Subscript>2</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript> Glass

This paper reports on the spectroscopic properties and energy transfer analysis of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂-La₂O₃ glasses with different Tm₂O₃ doping concentrations (0.2, 0.5, 2.0, 2.5, 3.0, 3.5, 3.5, 4.0 wt%). Mid-IR fluorescence intensities in the range of 1,300 nm−2,200 nm have been measured when excited under an 808 nm LD for all the samples with the same pump power. Energy level structure and Judd-Ofelt parameters have been calculated based on the absorption spectra of Tm³⁺, cross-relaxation rates and multi-phonon relaxation rates have been estimated with different Tm₂O₃ doping concentrations. The maximum fluorescence intensity at around 1.8 μm has been obtained in Tm₂O₃-3 wt% sample and the maximum value of calculated stimulated emission cross-section of Tm³⁺ in this sample is about 0.48 × 10⁻²⁰ cm² at 1,793 nm, and there is not any crystallization peak in the DSC curve of this sample, which indicate the potential utility of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂- La₂O₃ glass for 2.0-μm optical fiber laser.     

Intense White Luminescence from Combustion Synthesized Ca<Subscript>12</Subscript>Al<Subscript>14</Subscript>O<Subscript>33</Subscript>: Yb<Superscript>3+</Superscript>/Yb<Superscript>2+</Superscript> Single Phase Phosphor

The Ca₁₂Al₁₄O₃₃: Yb³⁺/Yb²⁺ single phase nano-phosphor has been synthesized through combustion route and its luminescence and lifetime studies have been carried out up to 20 K using 976 and 266 nm excitations. The samples heated in open atmosphere have shown the presence of Yb in Yb³⁺ and Yb²⁺ states. The 976 nm excitation results a cooperative upconversion emission at 486 nm due to the Yb³⁺ state and a broad band in the blue region and has been assigned to arise from the defect centers. The 266 nm excitation on the other hand results a broad emission band even from as-synthesized phosphor without doping of Yb, the width of which increases in presence of Yb due to the emission from Yb²⁺ ions formed in heated samples. The white emission covers almost whole visible region with bandwidth 190 nm. The ions in Yb²⁺ state has been found to increase with the increase in heating temperature up to 1,273 K. A back conversion of Yb²⁺ to Yb³⁺ has been observed for higher temperatures. Effect of boric and phosphoric acids as flux on the emission properties of Yb³⁺ and Yb²⁺ states have been examined and discussed. Quantum yield of emission has also been determined for different samples.     

Tunable bluish green to yellowish green Ca<Subscript>2(1-x)</Subscript>Sr<Subscript>2x</Subscript>Al<Subscript>2</Subscript>SiO<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphors for potential LED application

A series of solid solutions with a general formula of Ca_2(1-x)Sr_2xAl₂SiO₇:Eu²⁺ were synthesized by a high temperature solid state reaction. The structure, diffuse reflection spectra, photoluminescence spectra, color-coordinate parameters and lifetimes of phosphors were investigated. XRD results show that Ca₂Al₂SiO₇ is totally miscible with Sr₂Al₂SiO₇. These solid solution phosphors show a broad excitation band of 350–450 nm that matches well with the output lights of near-UV LEDs and tunable emission from bluish green to yellowish green. These optical properties originate from the 4f⁷–4f⁶5d transition of Eu²⁺ ions. The crystal field strength was considered to be tailed by controlling the host composition, which leads to the shift of absorption band and emission band, and the varying of color coordinates. PACS  78.55.-m; 42.70.-a; 61.05.C-     

Luminescence in Dy<Superscript>3+</Superscript> and Eu<Superscript>3+</Superscript> Activated K<Subscript>3</Subscript>Al<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The Dy³⁺ and Eu³⁺ activated K₃Al₂ (PO₄)₃ phosphors were prepared by a combustion synthesis. From a powder X-ray diffraction (XRD) analysis the formation of K₃Al₂ (PO₄)₃ was confirmed. In the photoluminescence emission spectra, the K₃Al₂(PO₄)₃:Dy³⁺ phosphor emits two distinctive colors: blue and yellow whereas K₃Al₂(PO₄)₃:Eu³⁺ emits red color. Thus the combination of colors gives BYR (blue–yellow–red) emissions can produce white light. These phosphors exhibit a strong absorption between 340 and 400 nm which suggest that present phosphor is a promising candidate for producing white light-emitting diodes (LED).     

Dynamics of ions produced by laser ablation of ceramic Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Al at 193 nm

We study the dynamics of ions produced upon ablation of Al and ceramic Al₂O₃ targets using nanosecond laser pulses at 193 nm (6.4 eV) as a function of the laser fluence from threshold up to 12 J cm⁻². An electrical (Langmuir) probe located at 40 mm from the target surface has been used for determining the ion yield and calculating the kinetic energy distributions. The results for both targets show the existence of a significant amount of ions having kinetic energies >200 eV (≈20% around threshold fluence), and kinetic energies are up to >1.5 keV. The results are related with the existence of direct photonionization processes caused by the photon energy of the laser being higher than the ionization potential of Al (5.98 eV). Comparison of the ion yield when ablating the two types of targets for fluences above threshold to data reported in the literature suggests that the magnitude of the yield and its threshold are parameters depending on the thermal properties of the target rather than on the laser wavelength. Around threshold, the different behavior of ion yield when ablating Al and Al₂O₃ targets suggests that the threshold for neutral aluminium and ion species in the case of ablation of the Al₂O₃ target must be similar.     

Synthesis of MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> spinel nanoparticles using a mixture of bayerite and magnesium sulfate

This article reports a novel method to prepare MgAl₂O₄ spinel nanoparticles. By calcining a powder mixture of bayerite and magnesium sulfate at 800 °C and washing with water, single-phase MgAl₂O₄ spinel nanoparticles were prepared. The powder mixture and the calcined products were characterized by differential thermal and thermogravimetric analysis (DSC-TG), X-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunauer–Emmett–Teller (BET) nitrogen-gas adsorption method. The obtained MgAl₂O₄ spinel nanoparticles have an average particle size of 12 nm, a narrow size distribution, and weak agglomeration. The specific surface area of the MgAl₂O₄ spinel powder is 110 m²/g. The formation of MgAl₂O₄ spinel is attributed to a solid-state reaction between γ-Al₂O₃ and MgSO₄.     

Evolution of MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> crystals in Al-Mg-SiO<Subscript>2</Subscript> composites

The present study analyzes the morphological transformations of reaction products i.e., MgO, MgAl₂O₄ occurring during the reaction between SiO₂ and Al-Mg alloy in Al-Mg-SiO₂ composite processed by the liquid metallurgy technique. Different phases of platelet and hexagonal morphologies are detected and their composition analysis by EDS has confirmed them as being transition phases existing between MgO, MgAl₂O₄ and Al₂O₃. This study has also revealed the gradual transformation of (i) MgO needles to octahedral MgAl₂O₄ through Mg-Al-Si-O and Mg-Al-O transition phases having platelet morphologies and (ii) MgAl₂O₄ to Al₂O₃ through hexagonal transition phases on holding of Al-5Mg-SiO₂ and Al-1Mg-SiO₂ composites respectively at 1023K. Fully developed α-Al₂O₃ crystals are not observed under the present experimental conditions, wherein the Mg content is well above the equilibrium Mg content required for the formation of stable Al₂O₃ (<0.05 wt. %). PACS 05.70.Np     

Synthesis of macroporous LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> with avian egg membrane as a template

Avian eggshell membrane as a template for the synthesis of a macroporous network of crystalline LiMn₂O₄ is demonstrated. Well-formed crystals of average size 600 nm formed a network structure whose average pore size was 2–4 μm. The unique porous structure should make it an attractive cathode material for lithium-ion batteries. In fact, for an 80% cutoff in capacity retention, LiMn₂O₄ obtained by a 10-h calcination at 800°C sustained 83 cycles.     

Magnetic properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.47</Subscript>Al<Subscript>0.03</Subscript>O<Subscript>2</Subscript> as positive electrode for Li-ion batteries

The layered LiNi_0.5Mn_0.47Al_0.03O₂ was synthesized by wet chemical method and characterized by X-ray diffraction and analysis of magnetic measurements. The powders adopted the α-NaFeO₂ structure. This substitution of Al for Mn promotes the formation of Li(Ni_0.47²⁺Ni_0.03³⁺Mn_0.47⁴⁺Al_0.03³⁺)O₂ structures and induces an increase in the average oxidation state of Ni, thereby leading to the shrinkage of the lattice unit cell. The concentration of antisite defects in which Ni²⁺ occupies the (3a) Li lattice sites in the Wyckoff notation has been estimated from the ferromagnetic Ni²⁺(3a)–Mn⁴⁺(3b) pairing observed below 140 K. The substitution of 3% Al for Mn reduces the amount of antisite defects from 7% to 6.4–6.5%. The analysis of the magnetic properties in the paramagnetic phase in the framework of the Curie–Weiss law agrees well with the combination of Ni²⁺ (S = 1), Ni³⁺ (S = 1/2) and Mn⁴⁺ (S = 3/2) spin-only values. Delithiation has been made by the use of K₂S₂O₈. According to this process, known to be softer than the electrochemical one, the nickel ions in the (3b) sites are converted into Ni⁴⁺ in the high spin configuration, while Ni²⁺(3a)–Mn⁴⁺(3b) ferromagnetic pairs remain, as the Li⁺(3b) ions linked to the Ni²⁺(3a) ions in the antisite defects are not removed. The results show that the antisite defect is surrounded by Mn⁴⁺ ions, implying the nonuniform distribution of the cations in agreement with previous NMR and neutron experiments.