Statistical characteristics of the mechanical constants of glass-reinforced plastics

The results of statistical treatment of experimental data on the physicomechanical properties of glass-reinforced plastics, based on alkali-free, aluminoborosilicate glass fibers (composition NS-55/6) with paraffin as lubricant and epoxyphenolbutyral composition EFB-4, obtained from tensile tests on flat specimens prepared by "wet" winding on a mandrel, are given. The data can be used for evaluating the effect of the scatter of the mechanical constants of a composite material on the efficiency of a structure and its elements.Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Mekhanika Polimerov, No. 6, pp. 1125–1128, November–December, 1972.     

Elastic constants of randomly reinforced plastics

A previously developed [4] general method of solving the nonlinear (in the statistical sense) boundary value problem of the theory of elasticity is used to determine the macroscopic moduli of elasticity of randomly reinforced plastics whose structure is simulated by a two-phase microinhomogeneous medium. The macroscopic modulus is represented in the form of a series composed of the sum of the mean value of the modulus and a sequence of corrections that take into account the central moments of the distribution of elastic constants. The limits of convergence of this series are established. The values of the macroscopic moduli for a glass-reinforced plastic obtained by calculation are compared with the experimental data.Mekhanika Polimerov, Vol. 3, No. 2, pp. 259–265, 1967     

On the theory of anisotropic creep of unidirectional glass-reinforced plastics

The basic relations of the theory of anisotropic creep of unidirectional glass-reinforced plastics (GRPs) in a three-dimensional stress state are found using a model of a material with inhomogeneous structure and the rheological properties of the resin. These relations are suitable for investigating the stress state of GRPs for resin stresses not exceeding certain values. The phenomena of simple creep and stress relaxation are studied with reference to a unidirectional GRP with an epoxy-maleic resin matrix.Mekhanika Polimerov, Vol. 1, No. 2, pp. 64–69, 1965     

Elastic constants and state of stress of glass-reinforced strip

The author examines the problem of the state of stress of glass-reinforced strip under short-time loading, when viscoelastic effects are unimportant. The proposed model is composed of a system of parallel identical glass fibers the space between which is filled with a matrix—resin. The change in the elastic constants is found as a function of the volume content of glass reinforcing. Further, the stress distribution between the elementary fibers is investigated for a glass-reinforced plastic in the three-dimensional stress state.Mekhanika Polimerov, Vol. 2, No. 4, pp. 593–602, 1966     

Procedure for determining the elastoplastic anisotropy constants and creep characteristics of glass-reinforced plastics

The dependence of the parameters of the static stress-strain and creep diagrams on the gage width and length of the specimen has been experimentally investigated. Other technical factors — the accuracy with which the specimen is mounted in the grips or wedges, the transverse strain distribution, and Saint Vanant's principle — are also considered. Recommendations are given for selecting the principal dimensions of test specimens of composites with various structures.State Scientific-Research Institute of Machine Science, Moscow. Translated from Mekhanika Polimerov, No. 4, pp. 747–754, July–August, 1970.     

Effect of temperature and anisotropy on the elastic constants of oriented glass-reinforced plastics

The experimental temperature dependence of the modulus of elasticity and Poisson's ratio are presented for SVAM oriented glass-reinforced plastic. The possibility of treating SVAM sheet as orthotropic at elevated temperatures is demonstrated.Institute of Chemical Physics, AS USSR, Moscow. Translated from Mekhanika Polimerov, Vol. 4, No. 6, pp. 1026–1032, November–December, 1968.     

Programmed winding of glass-reinforced plastics

It is proposed to employ a variable winding tension designed to give a required initial stress distribution. The program is constructed on the basis of solutions describing the loss of tension associated with winding and the softening of the resin during heat treatment. The problems are solved in the elastic formulation. Programs are obtained for three cases: constant tension in a ring sill on the mandrel, compensation of the stresses that develop after removal from the mandrel, and compensation of the thermoelastic stresses that develop during cooling.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 1, pp. 48–53, January–February, 1970.     

Static fatigue of glass-reinforced plastics

Nonlinear damage accumulation rules are usually constructed on the basis of certain hypotheses derived from semiempirical considerations. A method is proposed for constructing an averaged nonlinear damage accumulation rule based on the direct utilization of the results of static fatigue tests on glass-reinforced plastic specimens. Numerical examples of the calculation of the static fatigue strength under repeat loading with a given strength criterion are presented.Sverdlovsk Branch of the Steklov Mathematical Institute, Academy of Sciences of the USSR. Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 3, pp. 492–497, May–June, 1969.     

Statistical strength of glass-reinforced plastics

The failure of glass-reinforced plastics is treated as an aggregate of successive failures of the individual fibers. A method of estimating the statistical strength from the distribution curve is proposed.Mekhanika Polimerov, Vol. 3, No. 3, pp. 498–502, 1967     

Relaxation characteristics of glass-reinforced plastics

A study was made of the relaxation properties of glass-reinforced plastics KAST-V, ÉDF, SVAM, and Textolite. The article gives experimental and theoretical values of the pliabilities and tables of the values of the relaxation properties required for the solution of boundary value problems in viscoelasticity.M. V. Lomonosov State University, Moscow. Translated from Mekhanika Polimerov, No. 3, pp. 560–562, May–June, 1970.     

Tensile tests on glass-reinforced plastics

The mechanism of failure of glass-reinforced plastics in short-time tensile tests is considered from the statistical viewpoint. It is thus possible to calculate for various materials the damage suffered by the test piece up to failure. This depends on the dispersion of the static properties but not on the absolute dimensions.Mekhanika Polimerov, Vol. 1, No. 2, pp. 93–103, 1965     

Effectiveness of using high-modulus and hollow fibers in glass-reinforced plastics with a three-dimensional structure

The elastic and strength characteristics of glass-reinforced plastics based on three-dimensional multilayer glass fabrics with high-modulus, hollow and solid glass fibers have been studied. The effectiveness of using high-modulus and hollow fibers in these composites is estimated. The characteristics are calculated from the properties of reinforcement and the matrix and the results are compared with the experimental data.     

Hollow-fiber glass-reinforced plastics with increased specific bending stiffness

It is shown that the use of hollow glass fibers makes possible a considerable increase in the specific bending stiffness of a glass-reinforced plastic as compared with solid-fiber material. At the same time, the thermophysical and dielectric properties are significantly improved.Mekhanika Polimerov, Vol. 2, No. 3, pp. 380–382, 1966     

Bending strength of oriented glass-reinforced plastics

The authors consider the effect of the low shear strength and shear stiffness of oriented glass-reinforced plastics (GRP) on the stress distribution and type of failure in bending. On the basis of relations obtained in [1] it is shown that the effect of shears on the magnitude and law of distribution of the normal and shear stresses is important only for very short beams made of materials with a low shear stiffness. An experimental study of the nature of failure in bending has revealed that the chief cause of extension of the region of shear failure of oriented GRP is the low shear strength of the material, and has made it possible to establish the limits of this region for three typical materials. Anisotropy of the elastic properties has little effect on the type of failure in bending.Mekhanika Polimerov, Vol. 2, No. 4, pp. 535–542, 1966     

Mechanical characteristics of radiation-cured glass-reinforced plastics

Data are presented on the mechanical characteristics of oligoester maleates copolymerized with styrene and the corresponding glass-reinforced plastics crosslinked by the thermochemical and radiation methods. It is established that the radiation-cured glass-reinforced plastics have improved strength and stiffness as compared with similar specimens obtained by thermochemical curing.Institute of Mechanics, Institute of High Molecular Compounds, Institute of Physical Chemistry, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Mekhanika Polimerov, No. 4, pp. 704–710, July–August, 1969.     

Design of two-way glass-reinforced plastics with high compressive strength

The conditions determining the design of two-way glass-reinforced plastics with high compressive strength are investigated. The relations between the physicomechanical and geometric parameters of the composite are obtained in the form of a system of inequalities, satisfaction of which ensures the obtaining of a high-strength material with a given utilization factor. It has been shown experimentally that these inequalities can be used as a first approximation for the optimal design of a two-way reinforced composite with high compressive strength.All-Union Scientific-Research Institute of Glass-Reinforced Plastics and Glass Fiber, Moscow. Moscow Institute of Electronic Machine Building. Translated from Mekhanika Polimerov, No. 4, pp. 655–660, July–August, 1973.     

Stress-strain relationships with nonlinear deformation of orthotropic glass-reinforced plastics

A theory of nonlinear elasticity of anisotropic bodies of the flow theory type is used to investigate nonlinear strains in orthotropic glass-reinforced plastics. Its applicability is experimentally confirmed (for two types of GRP) and the strain-hardening function employed in the theory is plotted. Simplified relationships are derived for direct loading and the relations obtained are compared with the strain theory of nonlinearelastic anisotropic bodies.Mekhanika Polimerov, Vol. 1, No. 4, pp. 28–34, 1965     

Fiber distribution in oriented glass-reinforced plastics

The distribution of the fibers in the structure of a glass-reinforced plastic has been experimentally investigated. Data have been obtained on the distribution of interfiber distances, fiber diameters, and the angles between the lines of centers. Experimental histograms and distribution curves are constructed.Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Mekhanika Polimerov, Vol. 5, No. 2, pp. 282–287, March–April, 1969.     

Residual stresses in glass-reinforced plastics parts

The determination of the residual stresses in glass-reinforced plastics elements is considered. It is shown that these stresses reach appreciable values and should be taken into account in strength calculations. Quantitative data are supplied for a series of materials. At normal operating temperatures the residual stresses are stable.Moscow Aviation Technological Institute. Translated from Mekhanika Polimerov, No. 6, pp. 1117–1119, November–December, 1969.