Trace analysis of heavy metal ions by ion chromatography

Summary An ion chromatographic separation technique for heavy metal ions is described. Using pressure-stable, silica-based, ion-exchange supports and standard HPLC equipment with post-column reaction detector high resolution is achieved as well as extremely high sensitivity in the parts per trillion (ppt)-range.     

Ultrasensitive voltammetric detection of trace heavy metal ions using carbon nanotube nanoelectrode array

We describe an ultrasensitive voltammetric detection of trace heavy metal ions using nanoelectrode arrays (NEAs) that are based on low-site density carbon nanotubes (CNTs). The NEAs were prepared by sealing the side-walls of CNTs with an epoxy passive layer that reduces the current leakage and eliminates the electrode capacitance, leading to a low background current. This provides a high signal-to-noise ratio. The CNTs-NEAs coated with a bismuth film were used successfully for voltammetric detection of trace cadmium(II) and lead(II) at the sub-ppb level. The detection limit of 0.04 microg L(-1) was obtained under optimum experimental conditions. The attractive behavior of the new carbon NEA sensing platform holds great promise for onsite environmental monitoring and biomonitoring of toxic metals.     

Amperometric detection of unithiol complexes of heavy metals in high-performance liquid chromatography

It was demonstrated that Pb(II), Cd(II), Hg(II), Ni(II), Co(II), and Cu(II) can be indirectly determined as their unithiol complexes by amperometric detection under static and HPLC conditions. Factors affecting the Chromatographic separation and amperometric detection of metal complexes of unithiol were studied. Two designs of flow electrochemical cells (thin-layer and wall-jet cells) and three electrode materials (platinum, graphite, and glassy carbon) were compared. The best sensitivity was attained for an amperometric detector with wall-jet flow cell and a graphite indicator electrode. The detection limits for Hg(II), Pb(II), and Cd(II) were 0.9, 0.3, and 0.1 μg/mL, respectively. The Chromatographic determination of heavy metals in a sample of waste water was carried out using the amperometric detector     

Indirect ultraviolet detection of alkaline earth metal ions using an imidazolium ionic liquid as an ultraviolet absorption reagent in ion chromatography

A convenient and versatile method was developed for the separation and detection of alkaline earth metal ions by ion chromatography with indirect UV detection. The chromatographic separation of Mg²⁺, Ca²⁺, and Sr²⁺ was performed on a carboxylic acid base cation exchange column using imidazolium ionic liquid/acid as the mobile phase, in which the imidazolium ionic liquid acted as an UV‐absorption reagent. The effects of imidazolium ionic liquids, detection wavelength, acids in the mobile phase, and column temperature on the retention of Mg²⁺, Ca²⁺, and Sr²⁺ were investigated. The main factors influencing the separation and detection were the background UV absorption reagent and the concentration of hydrogen ion in ion chromatography with indirect UV detection. The successful separation and detection of Mg²⁺, Ca²⁺, and Sr²⁺ within 14 min were achieved using the selected chromatographic conditions, and the detection limits (S /N = 3) were 0.06, 0.12, and 0.23 mg/L, respectively. A new separation and detection method of alkaline earth metal ions by ion chromatography with indirect UV detection was developed, and the application range of ionic liquids was expanded.     

多壁碳纳米管修饰电极用于离子色谱分离电活性氨基酸的安培检测

将经羧基化的多壁碳纳米管(MWNTs)修饰在玻碳电极表面,制得碳纳米管修饰电极,并通过循环伏安法研究了某些可氧化的氨基酸在该电极上的电催化行为。该电极对半胱氨酸,色氨酸和酪氨酸有明显的电催化作用,且具有较高的灵敏度和稳定性。在一定的色谱条件下,经过离子色谱分离,这些可氧化的氨基酸的检测限分别为:半胱氨酸7.0×10-7mol L;色氨酸2.0×10-7mol L;酪氨酸3.5×10-7mol L(3倍信噪比)。方法已用于头发中这些氨基酸含量的测定。     

Voltammetric study of the transfer of polyammonium ions at nitrobenzene / water interface.

The transfer of polyammonium ions, poly[(dimethylimino)-1,6-hexanediyl] (n = 140, n being the degree of polymerization) ion and poly[(dimethylimino)(2-oxo-1,2-ethanediyl)imino-alpha,omega-alkanediylimino(1-oxo-1,2-ethanediyl)(dimethylimino)-alpha',omega'-alkanediyl] ([-N+ (CH3)2CH2CONH(CH2)x NHCOCH2N+ (CH3)2(CH2)y-]n, x = 2, 3, 4, or 6, y = 3 or 6, and n = 30-130) ions, at a polarizable nitrobenzene / water interface has been studied by normal pulse voltammetry and cyclic voltammetry. Despite the polydispersity of the preparations, by normal pulse voltammetry, an S-shaped current-potential curve with a well-defined limiting current, and, by cyclic voltammetry, a pair of anodic and cathodic peak currents due to the transfer of polyammonium ions across the interface were observed within the potential window. The voltammetric behavior is described. Also, the effect of ion-pair formation of the polyammonium ions with supporting electrolyte anions in nitrobenzene- and water-phases on the half-wave or midpoint potential of the ion-transfer, and the relation between the structure of the polyammonium ions and the transfer potentials are discussed.     

Amperometric detection at a carbon-fibre array ring/glassy-carbon disk electrode in a wall-jet cell

A wall-jet cell incorporating a carbon fibre array ring/glassy-carbon disk electrode has been constructed, and characterized by the cyclic voltammetry and flow-injection techniques. The ring (composed of several microdisks) and glassy-carbon disk electrode, can be used separately for different purposes, e.g., detection in solution without a supporting electrolyte, collection/shielding detection with dual-electrode and voltammetric/amperometric detection with series dual-electrode. The electrode shows better collection and shielding effects than the usual ring-disk electrode in quiescent solution and the series dual-electrode in a thin-layer flow-through cell. The detection limit at the ring electrode is comparable with that at a conventional-size electrode, and has been used in the mobile phase without a supporting electrolyte, proving to be a promising detector for normal-phase liquid chromatography.     

New synthesized ligands for detection of heavy metal ions

Some new chemo-sensors (4,4'-((1E,1′E)-(2,2′-dichloro-[1,1′-biphenyl]-4,4′-diyl)bis(diazene-2,1-diyl))bis(3,5-dihydroxybenzoic acid), 4-((E)-(4-(N-(4-((E)-(4-carboxy-2,6-dihydroxyphenyl)diazenyl)phenyl)sulfamoyl)phenyl)diazenyl)-3,5-dihydroxybenzoic acid, 4-((E)-(4-((4-((E)-(4-carboxy-2,6-dihydroxyphenyl)diazenyl)-2-sulfophenyl)amino)phenyl)diazenyl)-3,5-dihydroxybenzoic acid) were synthesized. These synthesized sensors were then characterized by FTIR, TLC, UV–Visible spectrophotometry, and NMR techniques. The sensors showed the best results for detection of all type of heavy metal ions simply by changing the colour of metal ion solution and by shifting in the λ_max values of sensors due to interactions.     

Determination of inorganic ions in drinking water by ion chromatography

Ion chromatography (IC) is now a well established methodology for the analysis of ionic species. The technique is applicable to the determination of a wide range of solutes in many sample types, although the determination of inorganic ions in drinking water continues to be the most widely used application of ion chromatography. Many regulatory and standard organizations, such as ASTM, AOAC, ISO, and US EPA, have approved methods of analysis based upon IC, most of which have been published within the last 10 years. Recent developments in the field of IC, such as the use of higher capacity columns, larger loop injections, more complex sample preparation and detection schemes, have been incorporated into new approved methods to allow the determination of inorganic contaminants, such as bromate, perchlorate, and chromate, at low μg/l levels in drinking waters. IC appears certain to remain an important technique for drinking water analysis and new methods based on IC will continue to be developed as more inorganic contaminants become regulated at lower limits in the future.     

Amperometric detection studies of Nafion/indium hexacyanoferrate film for the determination of electroinactive cations in ion chromatography

An amperometric detector based on the chemical modification of Nafion and indium (III) hexacyanoferrate (II, III) thin film (Nafion/In-CN-Fe) onto a glassy carbon (GC) electrode, was first successfully used for the determination of electroinactive cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺) in single column ion chromatography (IC). A set of well-defined peaks of electroinactive cations was obtained. The detection limits of the cations are 8.9 × 10^–6 mol/L for Li⁺, 2.3 × 10^–6 mol/L for Na⁺, 5.2 × 10^–6 mol/L for K⁺, 4.8 × 10^–6 mol/L for Rb⁺, 4.0 ׶10^–6 mol/L for Cs⁺ and 5.3 × 10^–6 mol/L for NH₄ ⁺ at a single-to-noise ratio of 3. The proposed method was quick, sensitive and simple. The cations in rainwater and mineral water were successfully analyzed by this method.     

Dynamic chelation ion chromatography of transition and heavy metal ions using a mobile phase containing 4-chlorodipicolinic acid

The chromatographic behaviour of selected transition and heavy metal ions, the lanthanides, uranium and aluminium, on a neutral polystyrene-divinylbenzene (PS-DVB) stationary phase (7 microm Hamilton PRP-1) dynamically modified with 4-chlorodipicolinic acid, was investigated to evaluate retention characteristics. Complicated retention factor against pH plots were found for these metals demonstrating changes in retention order. It was concluded that complexation between the metal ions and the ligand adsorbed on the resin was strongly influenced by the decrease in dynamic loading with increase in pH, coinciding with changes in the metal-to-ligand ratio in the mobile phase. Possible reversed-phase interactions between metal-chlorodipicolinic acid complexes and the hydrophobic PS-DVB stationary phase also could not be ruled out. An eluent of 0.25 mM chlorodipicolinic acid, I M potassium nitrate at pH 2.2 was suitable for the separation of seven transition and heavy metal ions in under 20 min on a 250 x 4.6 mm column (with 50-mm guard column), determined in a certified water sample with good accuracy (R2 > or = 0.994) and reproducibility (RSD 1-4.2%). Pb(II), Cd(II) and Cu(II) were additionally analysed in <10 min in a more complicated certified rice flour matrix, using the same eluent but adjusted to pH 1.5, again with good accuracy (R2 > or = 0.998) and reproducibility (RSD 0.48-1.38%).     

Amperometric detection studies of Nafion/indium hexacyanoferrate film for the determination of electroinactive cations in ion chromatography

An amperometric detector based on the chemical modification of Nafion and indium (III) hexacyanoferrate (II, III) thin film (Nafion/In-CN-Fe) onto a glassy carbon (GC) electrode, was first successfully used for the determination of electroinactive cations (Li+, Na+, K+, Rb+, Cs+, NH4+) in single column ion chromatography (IC). A set of well-defined peaks of electroinactive cations was obtained. The detection limits of the cations are 8.9 x 10(-6) mol/L for Li+, 2.3 x 10(-6) mol/L for Na+, 5.2 x 10(-6) mol/L for K+, 4.8 x 10(-6) mol/L for Rb+, 4.0 x 10(-6) mol/L for Cs+ and 5.3 x 10(-6) mol/L for NH4+ at a single-to-noise ratio of 3. The proposed method was quick, sensitive and simple. The cations in rainwater and mineral water were successfully analyzed by this method.     

Concentration of heavy metal ions in water using thermoresponsive chelating polymer

Thermoresponsive polymers, poly(N-isopropylacrylamide) (PNIPAAm), having chelating functionalities were synthesized. PNIPAAm-imidazole (-Im) was precipitated and formed a gum-like aggregate in the neutral pH region at 50 °C, while PNIPAAm-carboxylic acid (---COOH) and PNIPAAm-iminodiacetic acid (-IDA) remained soluble even at pH 7. An addition of a paired ion, dodecyltrimethylammonium ion, was effective for inducing the precipitation of those polymers. PNIPAAm-Im was useful for collecting copper(II), nickel(II), cobalt(II), and lead(II), but was ineffective for cadmium(II) recovery. In contrast, PNIPAAm-COOH collected cadmium(II), while insufficiently recovered cobalt(II) and nickel(II). PNIPAAm-IDA was the best choice for collecting all metal ions in neutral pH's. After 20-folds concentration, the metal ions in river and seawater were successfully determined by graphite furnace atomic absorption spectrometry (GFAAS).     

Determination of metal ions by ion chromatography with precolumn electrochemical preconcentration

The determination of heavy metals in concentrations less than 10(-6) mol/L by ion chromatography with conductivity detection requires a preconcentration step. Therefore, a special electrochemical equipment and method was developed for the on-line preconcentration of the divalent metals Ni, Co, Zn and Cd and their subsequent ion chromatographic determination. The loop of the injection valve of an ion chromatograph was replaced by an electrochemical flow-through-cell with a gold working electrode, a platinum auxiliary electrode and a silver/silver sulphate reference electrode. The preconcentration step consists of the deposition of the reduced metals on the electrode surface during a continuous pumping of the sample solution through the cell. After switching of the mobile phase through the cell, the analytes are injected after their reoxidation directly into the mobile phase. A new preconcentration step is simultaneously possible during the actual chromatographic run. An effective separation of the analytes from the matrix is also possible with the proposed system. A maximum of metal ion accumulation was obtained after 120 min in the galvanostatic mode on a gold tube electrode. The detection limits for Co(II), Ni(II), Zn(II) and Cd(II) were improved by a factor of 7.7, 10.4, 11.2, 14.0, respectively, and were in the 0.1 micromol/L concentration range with a RSD of 2-6%. The accumulation of metal ions was disturbed in the presence of Cr(III).     

Determination of metal ions by ion chromatography with precolumn electrochemical preconcentration

The determination of heavy metals in concentrations less than 10^-6 mol/L by ion chromatography with conductivity detection requires a preconcentration step. Therefore, a special electrochemical equipment and method was developed for the on-line preconcentration of the divalent metals Ni, Co, Zn and Cd and their subsequent ion chromatographic determination. The loop of the injection valve of an ion chromatograph was replaced by an electrochemical flow-through-cell with a gold working electrode, a platinum auxiliary electrode and a silver/silver sulphate reference electrode. The preconcentration step consists of the deposition of the reduced metals on the electrode surface during a continuous pumping of the sample solution through the cell. After switching of the mobile phase through the cell, the analytes are injected after their reoxidation directly into the mobile phase. A new preconcentration step is simultaneously possible during the actual chromatographic run. An effective separation of the analytes from the matrix is also possible with the proposed system. A maximum of metal ion accumulation was obtained after 120 min in the galvanostatic mode on a gold tube electrode. The detection limits for Co(II), Ni(II), Zn(II) and Cd(II) were improved by a factor of 7.7, 10.4, 11.2, 14.0, respectively, and were in the 0.1 mol/L concentration range with a RSD of 2–6%. The accumulation of metal ions was disturbed in the presence of Cr(III).     

Non-trivial temperature effects on the cation exchange chromatography and chelation ion chromatography of metal ions

The effect of column temperature upon the retention of metal ions on sulfonated and mono-, di-, and amino-carboxylated cation exchange columns has been investigated. The retention of alkali, alkaline earth and transition metal ions on each of the above types of cation exchanger was studied over the temperature range 19-65 degrees C. A major difference between the behaviour of mono- and divalent metal ions was shown on each of the above stationary phases, with the monovalent alkali metals exhibiting clearly exothermic behaviour (a decrease in retention with increased temperature) under acidic eluent conditions and an apparent relationship between retention factor and the magnitude of the temperature effect. The effect of temperature upon alkaline earth metal ions was less defined, although strongly endothermic behaviour (increase in retention with temperature) could be seen on all stationary phases through correct choice of eluent. The transition metal ions studied showed endothermic behaviour on all four stationary phases, with the sulfonated column unexpectedly showing the largest increases in retention. The above behaviour can be partially explained through the dominance of the type of solute-stationary phase interaction governing retention. In several of the above columns, both ion-exchange and surface complexation interactions can occur, with the effects of temperature indicating which process dominates under specific eluent conditions.     

Chloride analysis in magnesium metal using ion chromatography with conductometric detection

A simple, rapid and accurate method for the determination of chloride in magnesium metal has been developed. The quantitative determination of chloride was accomplished by anion exchange chromatography with conductometric determination. A Metrosep Anion Dual 2 analytical column connected in series with a Metrosep RP guard column was used for chloride separation. A solution containing a mixture of 1.3 mM Na2CO3 and 2 mM NaHCO3 was used as eluent. The method requires a sample dissolution using nitric acid. The limit of detection for the determination of chloride is 50 mg kg(-1) and the relative standard deviation was 5% for the overall method. The recovery of chloride added was 99-102%. No interference was observed from either the closely eluting "system peak" or the nitrate peak in the determination of chloride.     

Rational design of a minimal size sensor array for metal ion detection

The focus of this study was to demonstrate that, in the luminescent sensors, the signal transduction may possibly be the most important part in the sensing process. Rational design of fluorescent sensor arrays for cations utilizing extended conjugated chromophores attached to 8-hydroxyquinoline is reported. All of the optical sensors utilized in the arrays comprise the same 8-hydroxyquinoline (8-HQ) receptor and various conjugated chromophores to yield a different response to various metal cations. This is because the conjugated chromophores attached to the receptor are partially quenched in their resting state, and upon the cation coordination by the 8-HQ, the resulting metalloquinolinolate complex displays a change in fluorescence. A delicate balance of conjugation, fluorescence enhancement, energy transfer, and a heavy metal quenching effect results in a fingerprint-like pattern of responses for each sensor-cation complex. Principal component analysis (PCA) and linear discriminant analysis (LDA) are used to demonstrate the contribution of individual sensors within the array, information that may be used to design sensor arrays with the smallest number of sensor elements. This approach allows discriminating between 10 cations by as few as two or even one sensor element. Examples of arrays comprising various numbers of sensor elements and their utility in qualitative identification of Ca(2+), Mg(2+), Cd(2+), Hg(2+), Co(2+), Zn(2+), Cu(2+), Ni(2+), Al(3+), and Ga(3+) ions are presented. A two-member array was found to identify 11 analytes with 100% accuracy. Also the best two of the sensors were tested alone and both were found to be able to discriminate among the samples with 99% and 96% accuracy, respectively. To illustrate the utility of this approach to a real-world application, identification of enhanced soft drinks based on their Ca(2+), Mg(2+), and Zn(2+) cation content was performed. The same approach to reducing array elements was used to construct three- and two-member arrays capable of identifying these complex analytes with 100% accuracy.     

Chemical oscillation with periodic adsorption and desorption of surfactant ions at a water/nitrobenzene interface.

Chemical oscillations with periodic adsorption and desorption of surfactant ions, alkyl sulfate ions, at a water/nitrobenzene interface have been investigated. The interfacial tension was measured with a quasi elastic laser scattering (QELS) method and the interfacial electrical potential was obtained. We found that this oscillation consists of a series of abrupt adsorptions of ions, followed by a gradual desorption. In addition, we observed that each abrupt adsorption was always accompanied by a small waving motion of the liquid interface. From the analysis of the video images of the liquid interface or bulk phase, we could conclude that each abrupt adsorption is caused by nonlinear amplification of mass transfer of ions from the bulk phase to the liquid interface by a Marangoni convection, which was generated due to local adsorption of the surfactant ions at the liquid interface that resulted in the heterogeneity of the interfacial tension. In the present paper, we describe the mechanism of the chemical oscillation in terms of the hydrodynamic effect on the ion adsorption processes, and we also show the interfacial chemical reaction with ion exchange during the ion desorption process.