Proton transport into a tethered bilayer lipid membrane

Tethered bilayer lipid membranes (tBLMs) are increasingly used to study biological membranes, membrane proteins and a variety of related topics. A tBLM is formed by binding a lipid bilayer to a metal surface (usually gold) via a hydrophilic tether (usually an ethyleneoxy chain). In this report we present an electrochemical study on ubiquinone in a tBLM which has provided insights into the properties of this hydrophilic layer, which has a very limited capability of storing and releasing protons. It is concluded that the often observed decrease in tBLM resistance upon addition of ionophores (or protonophores) could be due to the penetration of ions (or protons) into the membrane rather than transport through the membrane.     

Incorporation of the HERG potassium channel in a mercury supported lipid bilayer

The HERG potassium channel was incorporated in a mercury-supported tethered bilayer lipid membrane (tBLM) obtained by anchoring a thiolipid monolayer to the mercury surface and by self-assembling a lipid monolayer on top of it from a lipid film spread on the surface of an electrolyte solution. HERG was then incorporated in this tBLM from its micellar solution in Triton X-100, thus avoiding the use of vesicles in the preparation of the tBLM and of proteoliposomes in channel incorporation. The HERG "inward" current following a repolarization step was obtained by subtracting the current recorded upon addition of the specific inhibitor WAY from that recorded prior to this addition. This current was compared with that reported in the literature by the patch-clamp technique.     

The study of the interaction of a model alpha-helical peptide with lipid bilayers and monolayers

We studied the interaction of the alpha-helical peptide acetyl-Lys(2)-Leu(24)-Lys(2)-amide (L(24)) with tethered bilayer lipid membranes (tBLM) and lipid monolayers formed at an air-water interface. The interaction of L(24) with tBLM resulted in adsorption of the peptide to the surface of the bilayer, characterized by a binding constant K(c)=2.4+/-0.6 microM(-1). The peptide L(24) an induced decrease of the elasticity modulus of the tBLM in a direction perpendicular to the membrane surface, E(radial). The decrease of E(radial) with increasing peptide concentration can be connected with a disordering effect of the peptide to the tBLM structure. The pure peptide formed a stable monolayer at the air/water interface. The pressure-area isotherms were characterized by a transition of the peptide monolayer, which probably corresponds of the partial intercalation of the alpha-helixes at higher surface pressure. Interaction of the peptide molecules with lipid monolayers resulted in an increase of the mean molecular area of phospholipids both in the gel and liquid crystalline states. With increasing peptide concentration, the temperature of the phase transition of the monolayer shifted toward lower temperatures. The analysis showed that the peptide-lipid monolayer is not an ideally miscible system and that the peptide molecules form aggregates in the monolayer.     

Formation of artificial lipid bilayers using droplet dielectrophoresis

We describe the formation of artificial bilayer lipid membranes (BLMs) by the controlled, electrical manipulation of aqueous droplets immersed in a lipid-alkane solution. Droplet movement was generated using dielectrophoresis on planar microelectrodes covered in a thin insulator. Droplets, surrounded by lipid monolayers, were brought into contact and spontaneously formed a BLM. The method produced BLMs suitable for single-channel recording of membrane protein activity and the technique can be extended to create programmable BLM arrays and networks.     

Fabrication of highly insulating tethered bilayer lipid membrane using yeast cell membrane fractions for measuring ion channel activity

A tethered bilayer lipid membrane (tBLM) was fabricated on a gold electrode using 1,2-dipalmitoyl-sn-glycero-phosphothioethanol as a tethering lipid and the membrane fractions of Saccharomyces pombe yeast cells to deposit the upper leaflet. The membrane fractions were characterized using transmission electron microscopy and dynamic light scattering and found to be similar in size to small unilamellar vesicles of synthetic lipids. The dynamics of membrane-fraction deposition and rupture on the tethering-lipid layer were measured using quartz crystal microgravimetry. The electrochemical properties of the resulting tBLM were characterized using electrical impedance spectroscopy and cyclic voltammetry. The tBLM's electrical resistance was greater than 1 MOmegacm(2), suggesting a defect-free membrane. The suitability of tBLM produced using membrane fractions for measuring ion-channel activities was shown by a decrease in membrane resistance from 1.6 to 0.43 MOmegacm(2) following addition of gramicidin. The use of membrane fractions to form high-quality tBLM on gold electrodes suggests a new approach to characterize membrane proteins, in which the upper leaflet of the tBLM is deposited, and overexpressed membrane proteins are incorporated, in a single step. This approach would be especially useful for proteins whose activity is lost or altered during extraction, purification, and reconstitution, or whose activities are strongly influenced by the lipid composition of the bilayer.     

Electrochemical biosensor based on supported planar lipid bilayers for fast detection of pathogenic bacteria

This paper presents a new ion-channel biosensor based on supported bilayer lipid membrane for direct and fast detection of Campylobacter species. The sensing element of a biosensor is composed of a stainless-steel working electrode, which is covered by artificial bilayer lipid membrane (BLM). Antibodies to bacteria embedded into the BLM are used as channel forming proteins. The biosensor has a strong signal amplification effect, which is defined as the total number of ions transported across the BLM. The total number of (univalent) ions flowing through the channels is 10¹⁰ ions s⁻¹. The biosensor showed a very good sensitivity and selectivity to Campylobacter species.     

Micro‐ and Nano‐Technologies for Lipid Bilayer‐Based Ion‐Channel Functional Assays

Ion channel proteins provide gated pores that allow ions to passively flow across cell membranes. Owing to their crucial roles in regulating transmembrane ion flow, ion channel proteins have attracted the attention of pharmaceutical investigators as drug targets for use in the studies of both therapeutics and side effects. In this review, we discuss the current technologies that are used in the formation of ion channel‐integrated bilayer lipid membranes (BLMs) in microfabricated devices as a potential platform for next‐generation drug screening systems. Advances in BLM fabrication methodology have allowed the preparation of BLMs in sophisticated formats, such as microfluidic, automated, and/or array systems, which can be combined with channel current recordings. A much more critical step is the integration of the target channels into BLMs. Current technologies for the functional reconstitution of ion channel proteins are presented and discussed. Finally, the remaining issues of the BLM‐based methods for recording ion channel activities and their potential applications as drug screening systems are discussed.     

Study on selectivity of permeating chiral complexes in bilayer lipid membranes (BLMs)

Electrical properties such as membrane potential (E_m) of planar bilayer lipid membranes (BLMs) are readily measured. Planar BLMs have been extensively used as models of biomembranes. In this paper we report BLMs formed in the solutions containing chiral complexes: d-K[Co(EDTA)], l-K[Co(EDTA)]; d-[Co(C₂O₄)(en)₂]I, and l-[Co(C₂O₄)(en)₂]I, whose E_m values display great differences, implying strong chiral selectivity. The permeability ratios of different chiral complexes calculated from E_m are the same as those obtained from human erythrocyte experiments. These results showed that chiral selectivity of cell uptake was mainly caused by the chirality of the membrane phospholipid itself. As a rapid and sensitive analytic tool, the BLM may be used to study permeating pathways and drug–membrane interactions. With further research, the BLM system may be developed into a useful method for drug screening.     

Highly reproducible method of planar lipid bilayer reconstitution in polymethyl methacrylate microfluidic chip

We developed a highly reproducible method for planar lipid bilayer reconstitution using a microfluidic system made of a polymethyl methacrylate (PMMA) plastic substrate. Planar lipid bilayers are formed at apertures, 100 microm in diameter, by flowing lipid solution and buffer alternately into an integrated microfluidic channel. Since the amount and distribution of the lipid solution at the aperture determines the state of the lipid bilayer, controlling them precisely is crucial. We designed the geometry of the fluidic system so that a constant amount of lipid solution is distributed at the aperture. Then, the layer of lipid solution was thinned by applying an external pressure and finally became a bilayer when a pressure of 200-400 Pa was applied. The formation process can be simultaneously monitored with optical and electrical recordings. The maximum yield for bilayer formation was 90%. Using this technique, four lipid bilayers are formed simultaneously in a single chip. Finally, a channel current through gramicidin peptide ion channels was recorded to prove the compatibility of the chip with single molecule electrophysiology.     

Alkylated glass partition allows formation of solvent-free lipid bilayer by Montal-Mueller technique

Formation of bilayer lipid membrane (BLM) by Montal-Mueller technique across a small aperture in a partition film traditionally requires coating of the aperture with a hydrophobic substance, often just an organic solvent. However, we demonstrate here that the most effective coating is not strictly hydrophobic but rather provides water/oil repellent properties. BLM were formed from diphytanoylphosphatidylcholine (DPhPC) on small 0.1-0.8 mm apertures made in specially prepared alkylated glass coverslips. The coverslips were either fluorosiliconized by 3,3,3-Trifluoropropyl-trimethoxysilane, which reduces adsorption of DPhPC in addition to creation of hydrophobic surface, or silanized, which promote adsorption of DPhPC. At fluorosiliconized surfaces stable BLM were formed. Specific capacitance of these BLM was 0.86 microF/cm(2)+/-5%, while their lateral tension was estimated as 4.3+/-0.4 mN/m. BLM were stable for hours under moderate voltage applied. At silanized surfaces stable BLM were formed only in acidic medium (3 相似文献   

Agar-supported lipid bilayers — basic structures for biosensor design. Electrical and mechanical properties

The lipid bilayer is widely accepted as the basic structure of all biological membranes. Known as BLM (bilayer lipid membrane), it can be prepared artificially. Suitably modified, the BLM serves as a very appropriate model for biological membranes. Recent investigations have verified the high analytical potential of artificial lipid membranes. With a structure and composition almost identical to the lipid moiety of biomembranes, the BLM may serve as an ideal host for receptor molecules of biological origin, thus becoming a transducer which could “see” the environment the way the living cell does. For the construction of lipid bilayer based biosensors; however, stable, easy to prepare and long-lasting lipid membranes are required. With this aim in mind, we have prepared lipid bilayer membranes which use an agar gel as support. This as-BLM (agar-supported BLM) has been shown to possess the same electrical, mechanical and dynamic properties the conventional BLM is famous for, along with the benefits of long-term stability and considerably elevated breakdown voltages. Its preparation on the tip of an agar-filled Teflon tube of 0.5 mm diameter is easy and can be performed even by less-skilled personnel.

In an attempt of further miniaturization the concept of the as-BLM was applied to thin-film micro-systems manufactured by standard micro-electronic techniques. The result is a lipid bilayer system, which, while preserving all the essential properties of the bilayer lipid membrane, can serve as a basic building block for cheap, disposable biosensoric systems.     

Bilayer lipid membranes from falling droplets

We describe a system that provides a rapid and simple way of forming suspended lipid bilayers within a microfluidic platform from an aqueous droplet. Bilayer lipid membranes are created in a polymeric device by contacting monolayers formed at a two-phase liquid–liquid interface. Microdroplets, containing membrane proteins, are injected onto an electrode positioned above an aperture machined through a conical cavity that is filled with a lipid–alkane solution. The formation of the BLM depends solely on the device geometry and leads to spontaneous formation of lipid bilayers simply by dispensing droplets of buffer. When an aqueous droplet containing transmembrane proteins or proteoliposomes is injected, straightforward electrophysiology measurements are possible. This method is suitable for incorporation into lab-on-a-chip devices and allows for buffer exchange and electrical measurements.

Pore formation by 6-ketocholestanol in phospholipid monolayers and its interpretation by a general nucleation-and-growth model accounting for the sigmoidal shape of voltage-clamp curves of ion channels

6-Ketocholestanol (KC), a steroid that differs from cholesterol mainly by the presence of a carbonyl group, forms pores inside a dioleoylphosphatidylcholine monolayer self-assembled on mercury by a mechanism similar to that of channel-forming peptides and proteins. The potential steps responsible for pore formation by KC molecules give rise to potentiostatic charge vs time curves whose sigmoidal shape and potential dependence can be quantitatively interpreted on the basis of a mechanism of nucleation and growth of KC clusters. Pore formation by KC allows the penetration of thallous ions across the otherwise impermeable phosphatidylcholine monolayer, while pore disruption taking place at more negative potentials causes a drop in thallous ion permeation. Pore disruption is also accounted for by a mechanism of nucleation and growth of holes inside the KC clusters. The kinetic model of nucleation and growth is general, and accounts quantitatively for the sigmoidal shape and potential dependence of the classical Hodgkin-Huxley voltage-clamp curves of potassium channels in squid giant axon,(1) using a minimum number of free parameters.     

A novel one-step method to incorporate ss DNA into bilayer lipid membranes supported on an agar electrode

A one-step method has been developed for incorporating ss DNA into a bilayer lipid membrane (BLM) on agar electrode, which displayed good responses to complementary ss DNA. The 5′-terminal phosphated end of ss DNA formed a phosphormidate bond with the amino group of N,N-diethylamidobenzene (NDAB) in the BLM forming solution. The method is easy to perform and has good reproducibility. Fourier transform infrared spectroscopy (FTIR) showed that the ss DNA was incorporated into the BLM.     

Effect of the Structure of Cholesterol‐Based Tethered Bilayer Lipid Membranes on Ionophore Activity

Tethered bilayer lipid membranes (tBLM) are formed on 1) pure tether lipid triethyleneoxythiol cholesterol (EO₃C) or on 2) mixed self‐assembled monolayers (SAMs) of EO₃C and 6‐mercaptohexanol (6MH). While EO₃C is required to form a tBLM with high resistivity, 6MH dilutes the cholesterol content in the lower leaflet of the bilayer forming ionic reservoirs required for submembrane hydration. Here we show that these ionic reservoirs are required for ion transport through gramicidin or valinomycin, most likely due to the thermodynamic requirements of ions to be solvated once transported through the membrane. Unexpectedly, electrochemical impedance spectroscopy (EIS) shows an increase of capacitance upon addition of gramicidin, while addition of valinomycin decreases the membrane resistance in the presence of K⁺ ions. We hypothesise that this is due to previously reported phase separation of EO₃C and 6MH on the surface. This results in ionic reservoirs on the nanometre scale, which are not fully accounted for by the equivalent circuits used to describe the system.     

Biophysical aspects of agar-gel supported bilayer lipid nembranes: a new method for forming and studying planar bilayer lipid membranes

Conventional bilayer lipid membranes (BLMs), formed by either the painting method or the Langmuir-Blodgett technique, lack the desired stability. This paper presents a simple method for forming long-lived BLMs on agar-gel supports. The supported BLM reported has a greatly improved mechanical stability and also has desirable dynamic properties. These self-assembled BLMs are of significant interest, in view of their similarity of biological membranes, their molecular dimension and their spontaneous formation.     

Tethered bilayer lipid micromembranes for single-channel recording: the role of adsorbed and partially fused lipid vesicles

A mercury-supported bilayer lipid micromembrane was prepared by anchoring a thiolipid monolayer to a mercury cap electrodeposited on a platinum microdisc about 20 μm in diameter; a lipid monolayer was then self-assembled on top of the thiolipid monolayer either by vesicle fusion or by spilling a few drops of a lipid solution in chloroform on the cap and allowing the solvent to evaporate. Single-channel recording following incorporation of the alamethicin channel-forming peptide exhibits quite different features, depending on the procedure followed to form the distal lipid monolayer. The "spilling" procedure, which avoids the formation of adsorbed or partially fused vesicles, yields very sharp single-channel currents lasting only one or two milliseconds. These are ascribed to ionic flux into the hydrophilic spacer moiety of the thiolipid. Conversely, the vesicle-fusion procedure yields much longer single-channel openings analogous to those obtained with conventional bilayer lipid membranes, albeit smaller. This difference in behavior is explained by ascribing the latter single-channel currents to ionic flux into vesicles adsorbed and/or partially fused onto the tethered lipid bilayer, via capacitive coupling.     

Electron transfer between ferrocene-modified Au/octadecanethiol/lipid BLM electrode and redox couples in solution

Bilayers incorporated with ferrocene consisting of self-assembled octadecanethiol and lipid monolayer on gold substrates were fabricated. Its electrochemical behaviors in solutions containing different redox couples were investigated by cyclic voltammetry and ac impedance. The transmembrane electron transfer reaction across octadecanethiol self-assembled film and an adsorbed phospholipid layer mediated by ferrocene have been observed in the solution of Fe(CN)6(3-/4-). The formal potential difference between mediator in bilayer lipid membrane (BLM) and redox couple in solution has a great impact on the transmembrane electron transfer behavior. The ferrocene-modified BLM electrodes might be useful for constructing a bilayer-based electrochemical current rectifying device.     

Amphiphile bilayer films from DPPC: bilayer lipid membranes and Newton black films

Amphiphile bilayer films are obtained from 1,2 dipalmitoyl-glycero-3-phosphocholine (DPPC): bilayer lipid membranes (BLM) and Newton black films (NBF), through thinning of the respective thin liquid films, thus allowing for a very precise determination of the moment of their formation. Stability (or rupture) and formation of BLM and NBF are considered from a unified point of view with the microscopic theory of Kashchiev–Exerowa [J. Colloid Interface Sci., 77 (1980) 501–511], based on the formation of nanoscopic holes in them. BLM and NBF are obtained and studied with the microinterferometric method of Scheludko–Exerowa in its contemporary version. The equivalent thickness of both BLM (in benzene solution between two water phases with 0.1 M NaCl) and NBF in aqueous DPPC solution (in the presence of 0.1 M NaCl) is determined as being h_w = 7.0 nm for BLM and h_w = 7.8 nm for NBF. By means of the dependences: BLM lifetime versus DPPC concentration and probability for BLM formation versus DPPC concentration, it is established that there exist metastable BLM and stable NBF. The good fit between the experimental results of τ(C) dependence and theory in the case of BLM allow to determine the three constants: pre-exponential factor A = 1.5 × 10⁻³ s, related to the process kinetics; constant B = 20.2 ± 0.2, related to the specific hole energy γ = 1.7 × 10⁻¹¹ J/m and the equilibrium concentration C_e = 6 × 10⁻⁴ ± 7.2 × 10⁻⁶ m/l. The specific hole linear energy γ = 1.7 × 10⁻¹¹ J/m determined as well as the binding energy Q between first neighbor molecules in the bilayers Q = 1.48 × 10⁻¹⁹ J (36 kT) are lower than the ones determined for DPPC foam bilayer in gel state γ = 9.1 × 10⁻¹¹ J/m and Q = 55 kT. This means that interaction is weaker in the case of BLM. The critical concentration C_c at which bilayer formation starts is: for BLM C_c = 30 μg/ml and for NBF C_c = 70 μg/ml. This concentration characterizes quantitatively the formation of the amphiphile bilayer and is a very useful parameter that can be used for various purposes.