Determination of estrogens and progestogens by mass spectrometric techniques (GC/MS, LC/MS and LC/MS/MS)

Steroid sex hormones and related synthetic compounds have been shown to provoke alarming estrogenic effects in aquatic organisms, such as feminization, at very low concentrations (ng/L or pg/L). In this work, different chromatographic techniques, namely, gas chromatography/mass spectrometry (GC/MS), liquid chromatography/mass spectrometry (LC/MS) and liquid chromatography/tandem mass spectrometry (LC/MS/MS), are discussed for the analysis of estrogens, both free and conjugated, and progestogens, and the sensitivities achieved with the various techniques are inter-compared. GC/MS analyses are usually carried out after derivatization of the analytes with bis(trimethylsilyl)trifluoroacetamide (BSTFA). For LC/MS and LC/MS/MS analyses, different instruments, ionization techniques (electrospray (ESI) and atmospheric pressure chemical ionization (APCI)), ionization modes (negative ion (NI) and positive ion (PI)) and monitoring modes (selected ion monitoring (SIM) and selected reaction monitoring (SRM)) are generally employed. Based on sensitivity and selectivity, LC/ESI-MS/MS is generally the method of choice for determination of estrogens in the NI mode and of progestogens in the PI mode (instrumental detection limits (IDLs) 0.1-10 ng/mL). IDLs achieved by LC/ESI-MS in the SIM mode and by LC/ESI-MS/MS in the SRM mode were, in general, comparable, although the selectivity of the latter is significantly higher and essential to avoid false positive determinations in the analysis of real samples. Conclusions and future perspectives are outlined.     

调味品中氯丙醇的GC/ECD和GC/MS/MS衍生化检测方法研究及应用

报道了调味品中氯丙醇的衍生化气相色谱(GC／ECD)和衍生化气相色谱双串联质谱法(GC／MS／MS)测定。GC／ECD测定酱油中3—氯—1，2—丙二醇(3—MCPD)的检出限达到0．01mg／kg，回收率为91％～104％，变异系数为2．27％～7．96％；GC／MS／MS同时测定酱油中1，3—二氯—2—丙醇、2，3—二氯—1—丙醇和3—氯—1，2—丙二醇，1，3—二氯—2—丙醇、2，3—二氯—1—丙醇的检出限为0．02mg／kg，3—氯—1，2—丙二醇的检出限为0．01mg／kg，回收率在92％～106％，变异系数为3．51％～13．33％。     

Analysis of turkish lignite tar by coupled LC/GC,GC/MS,and capillary SFC

This work describes the analysis of a pyrolysis product of a lignite sample obtained from the Turkish Goynuk reserve. The aliphatic, aromatic and polar compounds present in the tar are separated and identified by various chromatographic techniques: Capillary gas chromatography/mass spectrometry (GC/MS), on-line high performance microbore liquid chromatography/capillary gas chromatography (LC/GC) and capillary supercritical fluid chromatography (SFC). The suitability of each technique for this particular application is discussed, and semi-quantitative results are presented for the major components detected.     

Determination of musk fragrances in sewage sludge by pressurized liquid extraction coupled to automated ionic liquid‐based headspace single‐drop microextraction followed by GC‐MS/MS

A method for the quantitative determination of ten musk fragrances extensively used in personal care products from sewage sludge was developed by using a pressurized liquid extraction (PLE) followed by an automated ionic liquid‐based headspace single‐drop microextraction and gas chromatography‐tandem mass spectrometry. The influence of main factors on the efficiency of PLE was studied. For all musks, the highest recovery values were achieved using 1 g of pretreated sewage sludge, H₂O/methanol (1:1) as an extraction solvent, a temperature of 80°C, a pressure of 1500 psi, an extraction time of 5 min, 2 cycles, a 100% flush volume, a purge time of 120 s, and 1 g Florisil as in‐cell clean‐up extraction sorbent. The use and optimization of an in‐cell clean‐up sorbent was necessary to remove fatty interferents of the PLE extract that make the subsequent ionic liquid‐based headspace single‐drop microextraction difficult. Validation parameters, namely LODs and LOQs, ranged from 0.5–1.5 to 2.5–5 ng/g, respectively. Good levels of intra‐ and interday repeatabilities were obtained analyzing sewage sludge samples spiked at 10 ng/g (n = 3, RSDs < 10%). The method applicability was tested with sewage sludge from different wastewater treatment plants. The analysis revealed the presence of all the polycyclic musks studied at concentrations higher than the LOQs, ranging from 6 to 530 ng/g. However, the nitro musk concentrations were below the LOQs or, in the case of musk xylene, was not detected.     

Determination of ketamine and amphetamines in hair by LC/MS/MS

A liquid chromatography-tandem mass spectrometry method was developed for the determination of ketamine (with its metabolite norketamine) and some amphetamines (amphetamine, methamphetamine, methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine). This method was developed to determine these compounds in hair and is able to simultaneously quantify all of them in human hair. Hair samples (20 mg) were washed and pulverized, and an extraction with formic acid (0.01%) and ultrasonication for 4 h was used. Deuterated analogs of the analytes were used as internal standards for quantification. Linearity from 0.5 to 25 ng/mg was obtained for both ketamine (and norketamine) and amphetamines with correlation coefficients exceeding 0.99. The limit of detection and the limit of quantification obtained were 0.1 and 0.5 ng/mg, respectively, for ketamine and amphetamines. A total of 25 hair samples from known drug abusers (relating to designer drug consumption or consumption of amphetamines) were examined by this validated method. The results show that the proposed method is suitable for testing these drugs in a single sample of hair. In addition, it is simpler and faster than analysis by conventional methods such as gas chromatography-mass spectrometry, which usually require a more laborious extraction procedure and, in most of cases, an additional derivatization process.     

烟草制品中紫苏葶的气相色谱/质谱法分析

以二氯甲烷为溶剂,丙酸苯乙酯为内标,将烟草制品进行萃取,经固相萃取柱纯化,采用气相色谱／质谱法定量分析了烟草制品中的紫苏葶．方法的定性检测限为0．11μ/g,定量检测限为0．36μ/g,平均回收率为95．53％,相对标准偏差（RSD）为1．89％．     

化妆品中碘丙炔醇丁基氨甲酸酯的高效液相色谱检测及质谱确证

建立了高效液相色谱(HPLC)-二极管阵列检测器(DAD)测定化妆品中碘丙炔醇丁基氨甲酸酯的方法.化妆品样品经超声提取后,高效液相色谱-二极管阵列扫描检测,并在235 nm波长进行分析.用保留时间结合紫外光谱定性,外标法定量,并采用液相色谱-质谱法确证.碘丙炔醇丁基氨甲酸酯的回收率为92.7%～99.8%,相对标准偏差在0.8%～2.1%之间,定量限为20 mg/kg.     

Determination of brevetoxins in shellfish by LC/MS/MS: single-laboratory validation

A single-laboratory validation is reported for an LC/MS/MS quantification of six brevetoxins in four matrixes (Greenshell mussel, eastern oyster, hard clam, and Pacific oyster). Recovery and precision data were collected from seven analytical batches using shellfish flesh at 0.05 mg/kg. Method recoveries and within-laboratory reproducibility ranged from 73 to 112%, with an RSD between 14 and 18% for brevetoxin-3, brevetoxin B5, brevetoxin B2, and S-desoxy brevetoxin B2. The recovery and within-laboratory reproducibility for brevetoxin-2 was 61%, with an RSD of 27%. Brevetoxin B1 gave an RSD of 12%, but no reference material was available and this toxin was only recorded in a hard clam sample naturally contaminated with brevetoxins. One naturally contaminated sample of each shellfish matrix, with brevetoxin levels ranging from 0.012 to 9.9 mg/kg, was tested in multiple batches, and the RSDs were similar to those for fortified samples at 0.05 mg/kg. Comparisons with limited data for the neurotoxic shellfish poisoning mouse bioassay for four naturally contaminated shellfish samples showed that the regulatory action limit of 0.8 mg/kg is conservative with respect to the bioassay regulatory limit of 20 mouse units/100 g.     

Determination of lipophilic toxins by LC/MS/MS: single-laboratory validation

An LC/MS/MS method has been developed, assessed, and intralaboratory-validated for the analysis of the lipophilic toxins currently regulated by European Union legislation: okadaic acid (OA) and dinophysistoxins 1 and 2, including their ester forms; azaspiracids 1, 2, and 3; pectenotoxins 1 and 2; yessotoxin (YTX), and the analogs 45 OH-YTX, Homo YTX, and 45 OH-Homo YTX; as well as for the analysis of 13-desmetil-spirolide C. The method consists of duplicate sample extraction with methanol and direct analysis of the crude extract without further cleanup or concentration. Ester forms of OA and dinophysistoxins are detected as the parent ions after alkaline hydrolysis of the extract. The validation process of this method was performed using both fortified and naturally contaminated samples, and experiments were designed according to International Organization for Standardization, International Union of Pure and Applied Chemistry, and AOAC guidelines. With the exception of YTX in fortified samples, RSDr below 15% and RSDR were below 25%. Recovery values were between 77 and 95%, and LOQs were below 60 microg/kg. These data together with validation experiments for recovery, selectivity, robustness, traceability, and linearity, as well as uncertainty calculations, are presented in this paper.     

Recently developed GC/MS and LC/MS methods for determining NSAIDs in water samples

Pharmaceuticals have become major targets in environmental chemistry due to their presence in aquatic environments (following incomplete removal in wastewater treatment or point-source contaminations), threat to drinking water sources and concern about their possible effects to wildlife and humans. Recently several methods have been developed for the determination of drugs and their metabolites in the lower nanogram per litre range, most of them using solid-phase extraction (SPE) or solid-phase microextraction (SPME), derivatisation and finally gas chromatography mass spectrometry (GC-MS), gas chromatography tandem mass spectrometry (GC-MS/MS) and liquid chromatography electrospray tandem mass spectrometry (LC-ES/MS/MS). Due to the elevated polarity of non-steroidal anti-inflamatory drugs (NSAIDs), analytical techniques based on either liquid chromatography coupled to mass spectrometry (LC-MS) and gas chromatography coupled to mass spectrometry (GC-MS) after a previous derivatisation step are essential. The most advanced aspects of current GC-MS, GC-MS/MS and LC-MS/MS methodologies for NSAID analysis are presented.     

Determination of pharmaceuticals from various therapeutic classes in dewatered sludge by pressurized liquid extraction and high performance liquid chromatography and tandem mass spectrometry (HPLC-MS/MS)

Pharmaceuticals are released to the environment after human and animal consumption, which partly comes from accumulation in sewage sludge during wastewater treatment. This paper developed a method for the determination of N,N-diethyl-meta-toluamide (DEET) and 14 pharmaceuticals belonging to multiple therapeutic classes such as antibiotic, anti-inflammatory, antilipidemic, anti-hypertensive, and anticonvulsant in dewatered sludge. Pressurized liquid extraction using methanol/McIlvaine buffer (volume ratio, 1?:?1), associated with HPLC-MS/MS was proven to be effective for extraction and quantification of pharmaceuticals and DEET in dewatered sludge. Optimization procedures, including extraction method, extraction solvents and clean-up treatment, were carried out by simulating naturally aged samples to provide a more realistic extraction than previous methods, which were often done by spiking the standard solution before extraction without any aging procedures. The internal standard quantification method using six isotopically labelled compounds was applied to improve the poor absolute recoveries induced by severe matrix effects to obtain better relative recoveries (70–120%). Good relative standard deviations (lower than 19.0% for 7 repeats) and the limit of quantification (0.6–19.4?µg/kg) indicated that the developed method was reliable and sensitive to extract and quantify the studied pharmaceuticals in dewatered sludge. For samples collected from eight sewage treatment plants in Beijing, China, it was found that trimethoprim, caffeine, ketoprofen and ibuprofen were the most prominent contaminants, with the median concentrations reaching 97.6, 179.4, 268.0 and 153.0?µg/kg, respectively. The level of ketoprofen, ibuprofen, mefenamic acid, cabamazepine and diclofenac were similar to results reported from Spain, whilst the levels of other compounds were similar to those found in Germany, Canada and the US.     

A combination atmospheric pressure LC/MS:GC/MS ion source: Advantages of dual AP-LC/MS:GC/MS instrumentation

Modification of commercial LC/MS instrumentation to allow both atmospheric pressure (AP) LC/MS and GC/MS is described. Advantages of this additional capability versus LC/MS alone include higher chromatographic resolution in the GC versus LC mode, greater peak capacity for complex mixture analysis, higher sensitivity for a variety of volatile compounds, and the ability to observe compounds of low polarity that are not readily observed in LC/MS. Advantages over conventional GC/MS include the ability to use higher carrier gas flow and shorter columns for passing less volatile materials through the gas chromatograph, selective ionization, and rapid switching between positive and negative ion modes. Other advantages include application of the enhanced capabilities of LC/MS instrumentation to GC/MS analyses such as cone voltage fragmentation, MS(n), high mass resolution, and accurate mass measurement. Limitations of APGC/MS include the inability to observe saturated hydrocarbon and certain other highly nonpolar compounds and less odd-electron fragmentation for computer aided library searching. For some analyses, the limitation related to ionization of highly nonpolar compounds is advantageous, as is the simplified mass spectrum and easy molecular weight identification that results from less fragmentation observed in the AP ionization mode.     

GC/MS法测定大米中精噁唑禾草灵和氰氟草酯残留量

采用乙腈提取,NH2固相萃取柱净化,GC/MS测定,建立了大米中精噁唑禾草灵和氰氟草酯残留量的测定方法。添加精噁唑禾草灵质量分数为0.02,0.2,0.5mg/kg,平均回收率分别为82.3%,88.8%和90.7%,相对标准偏差分别为6.8%,8.2%和3.7%,检出限为0.02 mg/kg;添加氰氟草酯质量分数为0.02,0.2,0.5mg/kg,平均回收率分别为87.7%,94.2%和92.3%,相对标准偏差分别为8.6%,5.6%和7.3%,检出限为0.02mg/kg。     

液相色谱-串联质谱法测定地表水中的丙烯酰胺

建立了地表水中丙烯酰胺残留的液相色谱-串联质谱联用测定方法。结果表明,该法的检出限0．1μg,线性范围0．1～100．0μg/L,加标回收率81．7％～86．4％。     

GC/MS测定锅巴中丙烯酰胺含量

建立了一种测定市售锅巴中的丙烯酰胺含量的方法.该法样品前处理不必经过溴化衍生,样品脱脂后用水提取丙烯酰胺,提取液过活性炭柱,再用乙酸乙酯将活性炭柱中吸附的丙烯酰胺洗脱.洗脱液浓缩后经气相色谱-质谱(GC-MS)定量分析,检测限为0.06 mg/kg,适合测定市售锅巴中的丙烯酰胺的含量.还考察了丙烯酰胺在水的固液两相中的分配比.     

Archaeological wood characterisation by PY/GC/MS, GC/MS, NMR and GPC techniques

The chemical characterisation of waterlogged archaeological wood is of paramount importance in terms of understanding not only the degradation processes of wood in artistic and archaeological objects but also the development of consolidation and conservation procedures. The two different types of archaeological waterlogged wood were characterized using several analytical techniques. The analytical protocol consists in using PY/GC/MS with in situ derivatisation with hexamethyldisilazane, GC/MS of the extractives, ¹H, ¹³C and ³¹P NMR analysis, and GPC. The main results showed that one of the ancient samples was a gymnosperm wood from the Pinaceae family, whereas the other type of wood was an angiosperm. Lignin from the angiosperm was oxidised in a benzylic position of β-O-4 to give oxo functional groups, in primary alcohol moiety to give carboxylic groups. In addition, the formation of a new intermonomeric bond 5-O-4 was observed.     

Adsorption of Oil Substances by Carbon Monolith and Their Subsequent Determination by GC/GC/MS

Moscow University Chemistry Bulletin - A monolith based on foamed graphite is used for the sorption of hydrocarbons (alkanes, cycloalkanes, arenes) as markers of oil pollution. This material is...