Flexural wave motion in beam-type disordered periodic systems: Coincidence phenomenon and sound radiation

This paper deals with flexural wave motion in uniform beam-type periodic systems whose repeating units are identical finite beams with multiple beam-length disorders. A general expression derived for the propagation constants has been employed to study its variation with frequency for a beam system having 4-span disordered repeating units. This is helpful in understanding flexural wave motion in disordered periodic beams. Free flexural waves have been studied as wave groups consisting of a large number of harmonic components of different wavelengths, phase velocities and directions. Phase velocities have been computed and plotted for different frequencies in the propagation zones in which the free waves progress without attenuation. This has been found to be useful in understanding and predicting the coincidence phenomenon in disordered periodic beams under convected pressure field loading. The excitation of wave groups in disordered periodic beam-type systems by a slow (subsonic) convecting pressure field can include fast (supersonic) moving flexural wave components which can radiate sound. It has been pointed out that sound radiation from a disordered periodic beam (or plate) can be quite different as compared to that from a periodic beam under similar convected pressure field loading.     

Propagation of acoustic waves in a fluid-filled pipe with periodic elastic Helmholtz resonators

Helmholtz resonators are widely used to reduce noise in a fluid-filled pipe system. It is a challenge to obtain lowfrequency and broadband attenuation with a small sized cavity. In this paper, the propagation of acoustic waves in a fluid-filled pipe system with periodic elastic Helmholtz resonators is studied theoretically. The resonance frequency and sound transmission loss of one unit are analyzed to validate the correctness of simplified acoustic impedance. The band structure of infinite periodic cells and sound transmission loss of finite periodic cells are calculated by the transfer matrix method and finite element software. The effects of several parameters on band gap and sound transmission loss are probed.Further, the negative bulk modulus of periodic cells with elastic Helmholtz resonators is analyzed. Numerical results show that the acoustic propagation properties in the periodic pipe, such as low frequency, broadband sound transmission, can be improved.     

Free wave propagation in two-dimensional periodic plates

The propagation of flexural waves in a two-dimensional periodic plate which rests on an orthogonal array of equi-spaced simple line supports has been investigated. A type of plane wave motion has been considered. An energy method has been developed to predict the frequency of wave propagation in terms of the propagation constants. A Galerkin type of analysis has been used, incorporating assumed complex modes of wave motion for the identical rectangular elements of the periodic plate. Expressions for the frequency have been obtained firstly by using simple polynomial modes for the plate displacements, and then (alternatively) by using characteristics beam function modes. The use of these different modes has first been demonstrated by applying them to the analysis of wave propagation in periodic beams. A single polynomial mode which satisfies the geometric and wave-boundary conditions of the periodic plate element leads to an elegant expression relating the frequency and the wave propagation constants in the first propagation band. The frequencies so obtained compare well with those found from a multi-mode, characteristic beam function analysis. The latter involves much more algebra, is solved as an eigenvalue problem, and yields the frequencies in as many propagation bands as are desired. The bounding frequencies and corresponding wave motions in the first and higher propagation bands have been identified, and it has been shown that the propagation bands can overlap. Consideration has been given to one-dimensional “strip” structures which are equivalent to the two-dimensional plate when a plane wave in a general direction is propagating. Furthermore, it is shown that the natural frequencies of finite rectangular periodic plates can be obtained very simply from the results of the wave propagation analysis.     

内插扩张室声子晶体管路带隙特性研究

声子晶体管路的带隙特性,可以实现管路系统在特定频率下的噪声控制.利用二维模态匹配法推导出单个内插扩张室元胞的传递矩阵,结合Bloch定理,得到声子晶体管路的能带结构计算方法;验证了二维方法在计算能带结构时的准确性.研究发现,内插扩张室声子晶体管路存在布拉格带隙和局域共振带隙.进一步研究了晶格常数以及内插管长度对能带结构的影响,结果表明,晶格常数主要控制布拉格带隙,而内插管长度对局域共振带隙有较大的影响,并研究了两种参数变化下的带隙耦合.研究结果可以为管路降噪设计提供新的思路.     

超材料型周期管路声传播特性及低频宽带控制

船舶管路系统噪声的低频宽带控制是船舶设计和制造中亟待解决的关键问题之一。将超材料理论引入船舶管路系统的结构设计,构造了具有低频声波带隙的一维周期管路结构,并给出了周期管路声波带隙和声波透射系数的计算方法。计算结果表明,该周期管路同时存在声波布拉格带隙和局域共振带隙。在这两种带隙频率范围内,声波在系统中的传播将被衰减抑制。进一步发现,布拉格和局域共振带隙在一定条件会发生耦合,出现带隙耦合展宽现象,且两种带隙存在精确耦合条件。利用带隙耦合的展宽效应和低频设计,可实现声波在低频范围内的传播操控,从而达到船舶管路系统低频噪声宽带控制的目的。      

Evolution of the exact spatiotemporal periodic wave and soliton solutions of the (3 + 1)-dimensional generalized nonlinear Schrödinger equation with distributed coefficients

In this paper the spatiotemporal evolution of the periodic wave is investigated analytically when the laser passes through the inhomogeneous nonlinear medium. Firstly, the (3 + 1)-dimensional generalized nonlinear Schrödinger equation with distributed coefficients is solved analytically by an improved homogeneous balance principle and F-expansion technique. A number of exact periodic traveling wave and spatiotemporal soliton solutions are obtained. Then, their propagation characteristics are analyzed in detail. It is found that the evolutions of propagation of spatiotemporal soliton and periodic wave solutions are regular when the diffraction and dispersion coefficients are the identical distributed coefficients, but the evolutions of propagation of these solutions are irregular with other coefficients.     

Modeling of Lamb wave propagation in plate with two-dimensional phononic crystal layer coated on uniform substrate using plane-wave-expansion method

We show that the conversional three-dimensional plane wave expansion method can be revised to investigate the lamb wave propagation in the plate with two-dimensional phononic crystal layer coated on uniform substrate. We find that an imaginary three-dimensional periodic system can be constructed by stacking the studied plates and vacuum layers alternately, and then the Fourier series expansion can be performed. The difference between our imaginary periodic system and the true three-dimensional one is that, in our system, the Bloch feature of the wave along the thickness direction is broken. Three different systems are investigated by the proposed method as examples. The principle and reliability of the method are also discussed.     

Phase velocities of plane waves in a pipe with a flow whose velocity varies along the radius

The phase velocities of plane waves in a pipe filled with a moving acoustic medium are studied for different laws of flow velocity variation along the pipe radius. The wave equation is solved by the discretization method, which breaks the entire pipe volume into individual cylinders under the assumption that, within each of the cylinders, the flow velocity of the medium is constant. This approach makes it possible to reduce the solution to the wave problem to solving Helmholtz equations for individual cylinders. Based on boundary conditions satisfied at the boundaries between neighboring cylinders, a homogeneous system of linear algebraic equations is obtained. From this system, with the use of the scattering matrices, a simple dispersion equation is derived for determining the phase velocities of plane waves. The stability of the numerical solution to the dispersion equation with respect to the number of cylinders is investigated. The phase velocities of quasi-homogeneous and inhomogeneous waves in a pipe are numerically calculated and analyzed for different velocities of a moving medium and different laws of flow velocity variation along the radius. It is shown that the variation that occurs in the phase velocity of a homogeneous plane wave in a pipe due to the motion of the medium is identical to the mean flow velocity for different laws of flow velocity variation along the radius. For inhomogeneous plane waves, the phase velocity increment exceeds the mean flow velocity several times and depends on both the law of wave amplitude distribution along the radius and the law of the flow velocity variation along the radius.     

Effect of Mean Flow on Acoustic Wave Propagation in a Duct with a Periodic Array of Helmholtz Resonators

Sound propagation properties of a duct system with Helmholtz resonators(HRs) are affected by mean flow.Previous studies have tended to focus on the effects of mean flows on acoustic response of a duct system with a finite number of HRs. Employing an empirical impedance model, we present a modified transfer matrix method for studying the effect of mean flow on the complex band structure of an air duct system with an infinite periodic array of HRs. The efficiency of the modified transfer matrix is demonstrated by comparison between an example of transmission response calculation for a finite single HR loaded duct and the finite element simulation result calculated using the COMSOL software. Numerical results are presented to analyze the effect of mean flow on the band structure and transmission loss of the sound wave in the duct system. It is hoped that this study will provide theoretical guidance for acoustic wave propagation of HR silencer in the presence of mean flow.     

Natural beam focusing of non-axisymmetric guided waves in large-diameter pipes

The propagation of non-axisymmetric guided waves in larger diameter pipes is studied in this paper by treating the guided waves as corresponding Lamb waves in an unwrapped plate. This approximation leads to a simpler method for calculating the phase velocities of hollow cylinder guided waves, which reveals a beam focusing nature of non-axisymmetric guided waves generated by a partial source loading. The acoustic fields in a pipe generated by a partial-loading source includes axisymmetric longitudinal modes as well as non-axisymmetric flexural modes. The circumferential distribution of the total acoustic field, also referred as an angular profile, diverges circumferentially while guided waves propagate with dependence on such factors as mode, frequency, cylinder size, propagation distance, etc. Exact prediction of the angular profile of the total field can only be realized by numerical calculations. In particular cases, however, when the wall thickness is far less than the cylinder diameter and the wavelength is smaller than or comparable to the pipe wall thickness, the acoustic field can be analyzed based on the characteristics of Lamb waves that travel along a periodic unwrapped plate. Based on this assumption, a simplified model is derived to calculate the phase velocities of non-axisymmetric flexural mode guided waves. The model is then applied to discussions on some particular characteristics of guided-wave angular profiles generated by a source loading. Some features of flexural modes, such as cutoff frequency values are predicted with the simpler model. The relationship between the angular profiles and other factors such as frequency, propagation distance, and cylinder size is obtained and presented in simple equations. The angular profile rate of change with respect to propagation distance is investigated. In particular, our simplified model for non-axisymmetric guided waves predicts that the wave beam will converge to its original circumferential shape after the wave propagates for a certain distance. A concept of "natural focal point" is introduced and a simple equation is derived to compute the 1st natural focal distance of non-axisymmetric guided waves. The applicable range of the simplified equation is provided. Industrial pipes meet the requirement of wall thickness being far less than the pipe diameter. The approximate analytical algorithms presented in this paper provides a convenient method enabling quick acoustic field analysis on large-diameter industrial pipes for NDE applications.     

Nonlinear and linear wave phenomena in narrow pipes

Phenomena arising in the course of wave propagation in narrow pipes are considered. For nonlinear waves described by the generalized Webster equation, a simplified nonlinear equation is obtained that allows for low-frequency geometric dispersion causing an asymmetric distortion of the periodic wave profile, which qualitatively resembles the distortion of a nonlinear wave in a diffracted beam. Tunneling of a wave through a pipe constriction is investigated. Possible applications of the phenomenon are discussed, and its relation to the problems of quantum mechanics because of the similarity of the basic equations of the Klein-Gordon and Schrödinger types is pointed out. The importance of studying the tunneling of nonlinear waves and broadband signals is indicated.     

A numerical method for acoustic normal modes for shear flows

The normal modes and their propagation numbers for acoustic propagation in wave guides with flow are the eigenvectors and eigenvalues of a boundary value problem for a non-standard Sturm-Liouville problem. It is non-standard because it depends non-linearly on the eigenvalue parameter. (In the classical problem for ducts with no flow, the problem depends linearly on the eigenvalue parameter.) In this paper a method is presented for the fast numerical solution of this problem. It is a generalization of a method that was developed for the classical problem. A finite difference method is employed that combines well known numerical techniques and a generalization of the Sturm sequence method to solve the resulting algebraic eigenvalue problem. Then a modified Richardson extrapolation method is used that dramatically increases the accuracy of the computed eigenvalues. The method is then applied to two problems. They correspond to acoustic propagation in the ocean in the presence of a current, and to acoustic propagation in shear layers over flat plates.     

WAVENUMBER PREDICTION OF WAVES IN BURIED PIPES FOR WATER LEAK DETECTION

Water leaks are a topic of great concern in Britain and many other countries, because of decreasing water supplies and the deterioration of old pipework. Correlation techniques are widely used in leak detection, but for these to be effective, the propagation wavespeeds and wave attenuation must be known. Relatively predictable for metal pipes, these are largely unknown for the newer plastic pipes, being highly dependent on the pipe wall properties and the surrounding medium. In this paper, pipe equations for n=0 axisymmetric wave motion are derived for a fluid-filled pipe, surrounded by an infinite elastic medium which can support both longitudinal and shear waves. These equations are solved for two wave types,s =1,2, which correspond to a fluid dominated wave and an axial shell wave, and expressions for a complex wavenumber for each wave are given.     

Effect of drifting carriers on longitudinal electro-kinetic waves in ion-implanted semiconductor plasmas

We present an analytical study of wave spectra of electro-kinetic waves propagating through semiconductor plasma, whose main constituents are drifting electrons, holes and non-drifting negatively charged colloids. By employing the hydrodynamical model of multi-component plasma, a compact dispersion relation for the same is derived. This dispersion relation is used to study slow electro-kinetic wave phenomena and resultant instability numerically. We find some important modifications in the wave spectra of the slow electro-kinetic branch. It is found that the drift velocities of electrons and holes are responsible for converting two aperiodic modes into periodic ones. The applied dc electric field increases the phase velocities of contra-propagating modes. The amplification coefficients of propagating modes can be optimized by tuning the amplitude of applied electric field and wave number. It is hoped that the results of this investigation should be useful in understanding the wave spectra of slow electro-kinetic waves in ion-implanted semiconductor plasma subjected to a dc electric field along the direction of wave propagation.     

Simultaneous measurement of the phase and group velocities of Lamb waves in a laser-generation based imaging method

This paper describes a novel approach to the simultaneous measurement of the phase and group velocities of Lamb waves based on images of their propagation. The laser-generation based imaging method was first introduced to obtain images of Lamb wave propagation. The time series of snapshot images is used to make a position-time diagram, and the velocities can be estimated based on the slopes of the position curves. Thus, the phase and group velocities can be obtained by measuring the phase advance and energy flow of the Lamb wave, respectively. Details of the principle of simultaneous measurement are presented herein. Experimental verification was also performed in the range of 0.2-3.0 MHz-mm using aluminum plates. The average errors between experiment and theory in the phase and group velocities were 3.31% and 5.68%, respectively.     

Physical design of a 10 MeV LINAC for polymer radiation processing

In China, polymer radiation processing has become one of the most important processing industries. The radiation processing source may be an electron beam accelerator or a radioactive source. Physical design of an electron beam facility applied for radiation crosslinking is introduced in this paper because of it’s much higher dose rate and efficiency. Main part of this facility is a 10 MeV travelling wave electron linac with constant impedance accelerating structure. A start to end simulation concerning the linac is reported in this paper. The codes Opera-3d, Poisson-superfish and Parmela are used to describe electromagnetic elements of the accelerator and track particle distribution from the cathode to the end of the linac. After beam dynamic optimization, wave phase velocities in the structure have been chosen to be 0.56, 0.9 and 0.999 respectively. Physical parameters about the main elements such as DC electron gun, iris-loaded periodic structure, solenoids, etc, are presented. Simulation results proves that it can satisfy the industrial requirement. The linac is under construction. Some components have been finished. Measurements proved that they are in a good agreement with the design values.     

Complete flexural vibration band gaps in membrane-like lattice structures

The propagation of flexural vibration in the periodical membrane-like lattice structure is studied. The band structure calculated with the plane wave expansion method indicates the existence of complete gaps. The frequency response function of a finite periodic structure is simulated with finite element method. Frequency ranges with vibration attenuation are in good agreement with the gaps found in the band structure. Much larger attenuations are found in the complete gaps comparing to those directional ones. The existence of complete flexural vibration gaps in such a lattice structure provides a new idea for vibration control of thin plates.     

铁磁非铁磁夹层中电子自旋波的传输及应用

建立了有限对一维铁磁性和非磁性层交错组成的周期系统, 应用布洛赫自旋波量子理论, 研究了该系统的基本性质及电子波函数散射特征对交错层数量依赖的关系. 研究发现: 在系统中电子波函数可表示为无限周期系统中转换矩阵特征向量的叠加或类布洛赫函数, 解此函数可得到任意层数系统的单色波散射的精确解. 在此基础上, 导出了电子波函数在周期系统中反射系数和透射系数对能量的依赖关系. 对光谱窗口的计算发现其势能和宽度几乎与全反射区域一样. 该系统由于高能量的传输和在电子自旋方向上对交换能的依赖而可能用于自旋滤波器. 关键词： 磁性多层膜 铁磁性和非磁性结构 电子散射 电子自旋滤波器     

Band structures of phononic-crystal plates in the form of a sandwich-layered structure

This study investigates the propagation of Lamb waves in phononic-crystal plates in the form of a sandwich-layered structure. The composite plates are composed of periodic layers bilaterally deposited on both sides of the homogeneous core layer. Using the analyses of the band structures and the transmission spectra, it is revealed that the core layer may induce significant modulations to the lower-order Lamb modes. The modulations are ascribed to the reshaped particle displacement fields of the eigenmodes. Prominently, the core layer made of soft material (rubber) combines the identical eigenmodes of the periodic layers into a pair of asymmetric and symmetric modes in which case the periodic layers vibrate independently. However, the core layer made of hard material (tungsten) or medium hardness material (silicon) couples the periodic layers tightly, in which case the composites vibrate as a whole. In addition, it is found that the phononic band gaps are very sensitive to the thickness of the core layer; this could be indispensable to practical applications such as bandgap tuning.     

弦线上波的传播规律实验装置的改进

对传统的验证弦线上横波的传播规律实验中的波源进行改进，采用单片机控制的可连续调节频率的装置，可以得到横波的波长与弦线中的张力、弦线的线密度及振动频率的关系，使得验证弦线上横波的传播规律的实验内容更加丰富。