6-溴代呋喃[2,3-d]嘧啶双环核苷的合成新方法研究

6-溴代呋喃[2,3-d]嘧啶双环核苷是合成具有显著抗病毒活性的呋喃并嘧啶双环核苷衍生物的重要中间体.该类化合物的文献制备方法合成步骤多,并需使用钯配合物作催化剂.以易得的5-甲酰基嘧啶核苷为原料,先经与四溴化碳缩合得5-(2,2-二溴乙烯基)嘧啶核苷类似物,然后在碘化亚铜催化下发生环化反应生成目标产物,不仅缩短了合成路线,而且避免了贵金属试剂的使用,是一种经济实用的新方法.     

新型2,2'-缩水-L-苏糖嘧啶膦酸核苷的合成（英文）

首先通过九步反应合成了一系列L-苏糖嘧啶核苷膦酸酯.用二乙胺基三氟化硫(DAST)处理L-苏糖嘧啶核苷膦酸酯,分别以中高收率得到相应的2,2’-缩水-1-(L-苏糖)尿嘧啶核苷膦酸酯类似物.对所得到的L-苏糖嘧啶核苷膦酸酯和2,2’-缩水-L-苏糖嘧啶膦酸核苷进行了初步的生物学评价,未发现任何活性.     

新型5-溴嘧啶衍生物的选择性合成

对甲苯磺酰氯与三甘醇单甲酯完成酯化反应,再与对溴苯酚缩合制得对溴苯基三甘醇单甲醚(3);3与硼酸甲酯完成取代反应、酸解后在Pd(PPh3)4催化下与5-溴-2-碘嘧啶(5)在甲苯中通过Suzuki偶联反应选择性地合成了5-溴-2-对(甲基三甘醇基)苯基嘧啶(1a),收率73%。以1-十二烯和5为主要原料,通过Suzuki偶联反应,一锅法选择性地合成了5-溴-2-十二烷基嘧啶(1b),收率82%。1a和1b未见文献报道,其结构经1HNMR,13C NMR和MS表征。     

一种非西他滨的合成方法

非西他滨(Fiacitabine,FIAC)是一种嘧啶核苷类似物,具有抗各种疱疹病毒的活性。本文以2-脱氧-2-氟-三苯甲酰基-α-D-阿拉伯呋喃糖为原料,常温条件下,经过溴化氢醋酸溶液溴化得到2-脱氧-2-氟-三苯甲酰基-α-D-溴化阿拉伯呋喃糖(4);再以胞嘧啶为原料经过碘化、Bz-保护得到N-(5-碘-2-氧代-1,2-二氢嘧啶-4-基)苯甲酰胺(5),最后中间体4和5反应后脱保护基得到非西他滨。整条路线反应原料廉价,反应步骤少,选择性高,总收率高达43%。     

5′-脱氧-5′-氟-5-氟尿核苷的合成和性质

很多含氟核苷具有生理活性,因此,合成类似物引起人们的兴趣。5-氟尿核苷和5′-脱氧-5′-氟尿核苷的合成巳见报道。但是,5′-脱氧-5′-氟-5-氟尿核苷的合成及由于     

微波辐射下4-硫胸腺嘧啶核苷的合成研究

提出了一种高效合成3’,5’-O-二乙酰基-4-硫胸腺嘧啶核苷的方法,该方法具有反应时间短、操作简便等优点,目标产物产率可达93.9%以上。以二氧六环做溶剂,反应温度102℃,乙酰化胸腺嘧啶核苷与P2S5的摩尔比为1∶1.2,微波功率700W辐射8分钟,即可高收率得到3’,5’-O-二乙酰基-4-硫胸腺嘧啶核苷。     

微波辐射下水中6-氯嘌呤(核苷)及8-溴嘌呤核苷的脱卤反应

以6-氯嘌呤,6-氯嘌呤核苷或8-溴嘌呤核苷为原料,微波辐射下与水合肼反应生成相应的6-肼嘌呤(2a～2e),6-肼嘌呤核苷(2f和2g)或8-肼嘌呤核苷(2h和2i);2在微波辐射下经Wolff-Kishner-HuangMinlon还原反应得到6-脱氯嘌呤,6-脱氯嘌呤核苷或8-脱溴嘌呤核苷,总收率46%～83%,其结构经1HNMR和13CNMR表征。     

新型5,5'-双[对-(4-氨基苯氧基)苯氧基]联嘧啶的合成

2-氯-5-溴嘧啶通过碘代,Ullmann,Williamson和还原反应,合成了新型5,5'-双[对-(4-氨基苯氧基)苯氧基]联嘧啶,其结构经1H NMR,IR和元素分析表征.     

杀结核菌素的全合成研究

杀结核菌素是一个吡咯[2,3-d]嘧啶核苷天然产物,具有显著的抗血吸虫感染、抗菌和抗肿瘤活性.报道了以微波促进的Vorbrüggen糖基化反应为关键步骤,以6-氯-7-溴-吡咯[2,3-d]嘧啶和1-O-乙酰基-2,3,5-O-三苯甲酰基-β-D-呋喃核糖为原料,经过3步反应以74%的总收率完成了杀结核菌素的全合成.同时研究了以全氟丁基磺酸钾、三甲基氯硅烷和硅基化试剂[六甲基二硅胺烷或者N,O-双(三甲基硅基)乙酰胺]在微波加热下一锅法合成7-去氮嘌呤核苷的方法.     

硫代核苷类似物合成研究进展

4′-硫代核苷类似物是核糖环中的氧原子被硫原子取代的核苷类似物。许多硫代核苷具有良好的抗病毒和抗肿瘤活性。4′-硫代核苷具有更稳定的糖基键和针对各种病毒或细胞酶的代谢稳定性的提升等固有优点。因此,对硫代核苷类似物的设计与合成,筛选出安全有效的抗病毒试剂应受到更多药物化学家们的关注,本文综述了近年来硫代核苷的合成研究进展。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.