In situ hydrogenation of terminal halogen in poly(methyl methacrylate) by ruthenium-catalyzed living radical polymerization: direct transformation of "polymerization catalyst" into "hydrogenation catalyst"

An in situ, selective, and quantitative hydrogenation of the terminal chlorine (alpha-haloester) in living PMMA-Cl into PMMA-H was achieved via direct transformation of a "polymerization catalyst" into a "hydrogenation catalyst" in the Ru(II)-catalyzed living radical polymerization, where the polymerization mixture of MMA was directly treated in situ with K2CO3 as a base and 2-propanol as a hydrogen donor. The reaction terminated the polymerization and, more importantly, the terminal chlorine was quantitatively hydrogenated, as confirmed by SEC, 1H NMR, and MALDI-TOF MS.     

The polymerization of butadiene by bis(η3-allylnickeltrifluoroacetate)/tetrachloro-1,4-benzoquinone revisited

The catalytic system bis(n³-allylnickeltrifluoroacetate)/tetrachloro-1,4-benzoquinone, reported in the literature to initiate the living polymerization of butadiene, was re-examined in more detail. All experiments dealing with catalyst-cocatalyst preparation indicate that, although polymerization rates are comparable to those reported previously, the present system is far from perfectly living. The dependence of M̄_n on conversion suggests that chain-transfer, most probably by β-hydride elimination, plays an important role.     

Synthesis and cationic ring‐opening polymerization of oxetane monomer containing five‐membered cyclic carbonate moiety via highly chemoselective addition of CO2

The bicyclic amidinium iodide effectively catalyzed the reaction of carbon dioxide and the epoxy‐containing oxetane under ordinary pressure and mild conditions with high chemoselectivity to give the corresponding oxetane monomer containing five‐membered cyclic carbonate quantitatively. The cationic ring‐opening polymerization of the obtained monomer by boron trifluoride diethyl ether proceeded to give linear polyoxetane bearing five‐membered cyclic carbonate pendant group in high yield. The molecular weight of the polyoxetane was higher than that of polyepoxide obtained by the cationic ring‐opening polymerization of epoxide monomer containing five‐membered cyclic carbonate. The cyclic carbonate functional crosslinked polyoxetanes were also synthesized by the cationic ring‐opening copolymerization of cyclic carbonate having oxetane and commercially available bisoxetane monomers. Analyses of the resulting polyoxetanes were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2606–2615     

Neodymium alk(aryl)oxides-dialkylmagnesium systems for butadiene polymerization and copolymerization with styrene and glycidyl methacrylate

The application of well-defined neodymium alkoxides/aryloxides in combination with dialkylmagnesium reagents for 1,3-butadiene (BD) polymerization and copolymerization with styrene (St) and glycidyl methacrylate (GMA) has been investigated. The trinuclear complex Nd₃(Ot-Bu)₉(THF)₂ (1) provided a low-activity system for BD polymerization, even at high temperature, but with a high trans-1,4 stereospecificity (trans-1,4≈95%). Aryloxide complexes Nd(O-2,6-t-Bu₂-4-Me-Ph)₃(THF) (2) and Nd(O-2,6-t-Bu₂-4-Me-Ph)₃ (3) were found to give more active systems. The polymerization displayed a controlled character, i.e. a precise control of the molecular weight and a low polydispersity (M_w/M_n<1.30) for high catalyst concentration, keeping the same level of stereocontrol over the polymerization course. The statistical copolymerization of BD and styrene with those systems was successful. High-molecular weight copolymers (M_n up to 50?000 g mol⁻¹) with noticeable styrene content (3-15 mol%) were synthesized. Determination of the microstructure by ¹³C-NMR showed exclusively trans-1,4-BD-St sequences. The livingness of BD polymerization encouraged attempts of diblock copolymerization with GMA. In this case, low-molecular weight polymers with variable polydispersities were obtained (M_n<20?000 g mol⁻¹; M_w/M_n=1.4-5.0). The composition of the copolymers was analyzed by ¹H- and ¹³C-NMR and IR spectroscopies. SEC analyses confirmed the true nature of the diblock copolymer. The influence of the alkylating agent on those (co)-polymerizations was briefly studied. Finally, the mechanism of polymerization is also discussed.     

Crystallization behaviour of polyoxetanes: poly(oxetane), poly (3,3-dimethyloxetane) and poly(3,3-diethyloxetane)

The influence of the crystallization temperature on the melting behaviour and crystalline structure of polyoxetane (PTO), poly(3,3-dimethyloxetane) (PDMO) and poly(3,3-diethyloxetane) (PDEO) has been studied using differential scanning calorimetry (DSC) and X-ray techniques. When PTO is crystallized by cooling from the relaxed melt state, only the orthorhombic modification is obtained. However, PDMO and PDEO can be crystallized in two different modifications depending on crystallization temperature. The effect of the substituents in the stability of main chain conformations in crystalline state is discussed.     

Mechanistic studies on the reductive cyclooligomerisation of CO by U(III) mixed sandwich complexes; the molecular structure of [(U(eta-C8H6{Si(i)Pr3-1,4}2)(eta-Cp*)]2(mu-eta1:eta1-C2O2)

The stoichiometric reaction of 1 equiv of CO with [(U(eta-C8H6{SiiPr3-1,4}2)(eta-Cp*)] affords the linear diuranium ynediolate complex [(U(eta-C8H6{SiiPr3-1,4}2)(eta-Cp*)]2(mu-eta1:eta1-C2O2) which does not react with further CO to give the deltate derivative [(U(eta-C8H6{SiiPr3-1,4}2)(eta-Cp*)]2(mu-eta1:eta2-C3O3). Spectroscopic and computational studies suggest a plausible mechanism for the formation of the deltate complex, in which a "zig-zag" diuranium ynediolate species is the key intermediate.     

Characterization of two linear chain compounds: Ferromagnet NiCl2(CH3OH)2(1,4-dioxane)0.5 (1) and paramagnet [NiCl2(H2O)2(1,4-dioxane)](1,4-dioxane) (2)

The solvent-mediated crystal-to-crystal transformation was observed from yellow crystal of NiCl₂(CH₃OH)₂(1,4-dioxane)_0.5 (1) to green crystal of [NiCl₂(H₂O)₂(1,4-dioxane)](1,4-dioxane) (2) under high humidity or adding of H₂O in CH₃OH/1,4-dioxane solution. The μ-Cl₂ bridge in 1 replaced by 1,4-dioxane bridge in 2. In 1, the chlorine-bridged linear chains of NiCl₂(CH₃OH)₂ and 1,4-dioxane molecules stack along the b- and c-axis alternatively with hydrogen bonds intrachain, interchain, between chain and solvent. These hydrogen bonds and dipolar interaction between ferromagnetic coupling chlorine-bridged chains result in long-range ferromagnetic ordering at 3.1 K and a strong frequency dependence of the ac-susceptibilities associated to domain structures with very large shape anisotropy was observed below 3.1 K. In 2, layers of 1,4-dioxane-bridged linear chains of NiCl₂(H₂O)₂(1,4-dioxane) are intercalated by layer of 1,4-dioxane molecules with hydrogen bonds between chain and solvent. Compound 2 is paramagnet to 2 K.     

Synthesis of benzoates of 1,4-bis(2,5-dimethyl-4-hydroxypiperidino)-2-butene and 1,4-bis-(2,5-dimethyl-4-hydroxypiperidino)-2-butyne

1,4-Bis(2,5-dimethyl-4-hydroxypiperidino)-2-butene and 1,4-bis(2,5-dimethyl-4-hydroxypiperidino)-2-butyne (II and III) were obtained by the action of 1,4-dibromo-2-butene and 1,4-dibromo-2-butyne on the form of 2,5-dimethyl-4-piperidol (I). The benzoates (IV and V) were obtained by acylation of II and III with benzoyl chloride.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 352–353, March, 1971.     

Vinyl Ethers Containing an Epoxy Group: XXII. Synthesis and Base-Catalyzed Transformations of 1-(Allyloxy)- and 1-[2-(Vinyloxy)ethoxy]-3-(2-propynyloxy)propan-2-ols

Reactions of 2-(allyloxymethyl)- and 2-[2-(vinyloxy)ethoxy]methyloxiranes with 2-propynol (～3 wt % of t-BuOK, 75–85°C, 5–10 h) lead to formation of new 1-organyloxy-3-(2-propynyloxy)propan-2-ols (yield 65–95%). On heating to 45–100°C in the presence of bases (KOH, t-BuOK), 1-allyloxy- and 1-[2-(vinyloxy)ethoxy]-3-(2-propynyloxy)propan-2-ols are transformed into the corresponding 2-vinyl-1,3-dioxolane, 6-methyl-2,3-dihydro-1,4-dioxine, 6-methylene-1,4-dioxane, and 2,3-dihydro-5H-1,4-dioxepine derivatives, whose yield and ratio strongly depend on the solvent nature, catalyst, and substituent at the hydroxy group. 2-Vinyl-1,3-dioxolane and 6-methyl-2,3-dihydro-1,4-dioxine derivatives are formed as the major products (yield 70–99%) in the presence of t-BuOK in aprotic media (toluene, THF, DMSO) or in the absence of a solvent as a result of prototropic isomerization followed by intramolecular heterocyclization. Intramolecular nucleophilic cyclization of 3-(2-propynyloxy)propan-2-ols to 6-methylene-1,4-dioxane is the predominant process in water in the presence of KOH. In all cases, the fraction of 2,3-dihydro-5H-1,4-dioxepine derivatives among the cyclization products ranges from 0 to 5% (KOH) or to 14% (t-BuOK).     

Initiation and propagation steps in the equibinary polymerization of butadiene by bis(h3-allylnickel trifluoroacetate)

Polymerization of butadiene by bis(h³-allylnickel trifluoroacetate) in benzene and o-dichlorobenzene solvents yields an equibinary 1,4-polybutadiene, containing equal amounts of cis and trans isomers. Initiation proceeds by addition of the allylic moiety of the initiator to a butadiene molecule. The rate of initiation is high enough to ensure complete consumption of the catalyst for a monomer/catalyst molar ratio of about 10 at 5°C. The propagation exhibits the characteristics of a “living” polymerization: the molecular weight is proportional to the conversion, and at the end of the reaction, the average degree of polymerization is equal to the monomer/catalyst molar ratio. Living polybutadienyl-nickel trifluoroacetate is able to reinitiate not only butadiene polymerization but also allene polymerization. However, for high [monomer]/[catalyst] ratios, conversion-dependent transfer reactions limit the molecular weight to 7000 in benzene and to 70,000 in bulk polymerization in the presence of small amounts of o-dichlorobenzene.     

Synthesis of isotactic polystyrene-block-polyethylene by the combination of sequential monomer addition and hydrogenation of 1,4-<Emphasis Type="Italic">trans</Emphasis>-polybutadiene block

Herein, we demonstrate the synthesis of a well-defined diblock copolymer consisting of isotactic polystyrene (iPS) and linear polyethylene, isotactic polystyrene-block-polyethylene (iPS-b-PE), by the combination of sequential monomer addition and hydrogenation. Isospecific living polymerization of styrene and living trans-1,4-polymerization of 1,3-butadiene were catalyzed by 1,4-dithiabutandiyl-2,2′-bis(6-cumenyl-4-methylphenoxy) titanium dichloride (complex 1) activated by triisobutyl aluminum modified methylaluminoxane (MMAO) at room temperature to provide highly isotactic polystyrene (iPS) and 1,4-trans-polybutadiene (1,4-trans-PBD) with narrow molecular weight distribution. Furthermore, the iPS-b-1,4-trans-PBD was synthesized via sequential monomer addition in the presence of complex 1 and MMAO. The hydrogenation of the 1,4-trans-PBD block was promoted by RuCl₂(PPh₃)₃ used as a catalyst to produce iPS-b-PE.     

2(H)-1,4-Oxazin-2-ones as ambident azadienes

3,5-Dichloro-6-phenyl-2(H)-1,4-oxazin-2-one 3, 5-chloro-3,6-dimethyl-2(H)-1,4-oxazin-2-one 4, 5-chloro-6-methyl-3-phenyl-2(H)-1,4-oxazin-2-one 5 and 5-chloro-3,6-diphenyl-2(H)-1,4-oxazin-2-one 7, are ambident azadienes reacting efficiently and selectively with both electron rich and electron poor dienophiles.     

Quantitative synthesis of star-shaped poly(vinyl ether)s with a narrow molecular weight distribution by living cationic polymerization

Star-shaped poly(vinyl ether)s with narrow molecular weight distributions were obtained from polymer-linking reactions of living polymers with a divinyl compound based on living cationic polymerization. For example, living polymers (DP(n) = 50-300) of isobutyl vinyl ether (IBVE), prepared with a cationogen/EtAlCl(2) at 0 degrees C in hexane in the presence of ethyl acetate, were allowed to react with a small amount of 1,4-cyclohexanedimethanol divinyl ether (DVE-1) to give a star-shaped poly(IBVE) in quantitative yield (100%). In addition, a notable feature of this star-shaped polymer was extremely narrow molecular weight distribution (M(w)/M(n) = 1.1-1.2). The structure of divinyl compounds and reaction conditions for the linking reaction are key factors for achieving quantitative yield of star-shaped polymers. To our best knowledge, this is the first example of selective preparation of star-shaped polymers with narrow molecular weight distribution via one-pot polymer-linking reactions, which has never been achieved in any other mechanisms. The M(w) and the number of arms per molecule ranged from 6 x 10(4) to 30 x 10(4) and 9 to 44, respectively. Thermosensitive star polymers were also synthesized in quantitative yield, and the products were found to undergo sensitive phase separation and physical gelation.     

Half-sandwich bis(tetramethylaluminate) complexes of the rare-earth metals: synthesis, structural chemistry, and performance in isoprene polymerization

The protonolysis reaction of [Ln(AlMe(4))(3)] with various substituted cyclopentadienyl derivatives HCp(R) gives access to a series of half-sandwich complexes [Ln(AlMe(4))(2)(Cp(R))]. Whereas bis(tetramethylaluminate) complexes with [1,3-(Me(3)Si)(2)C(5)H(3)] and [C(5)Me(4)SiMe(3)] ancillary ligands form easily at ambient temperature for the entire Ln(III) cation size range (Ln=Lu, Y, Sm, Nd, La), exchange with the less reactive [1,2,4-(Me(3)C)(3)C(5)H(3)] was only obtained at elevated temperatures and for the larger metal centers Sm, Nd, and La. X-ray structure analyses of seven representative complexes of the type [Ln(AlMe(4))(2)(Cp(R))] reveal a similar distinct [AlMe(4)] coordination (one eta(2), one bent eta(2)). Treatment with Me(2)AlCl leads to [AlMe(4)] --> [Cl] exchange and, depending on the Al/Ln ratio and the Cp(R) ligand, varying amounts of partially and fully exchanged products [{Ln(AlMe(4))(mu-Cl)(Cp(R))}(2)] and [{Ln(mu-Cl)(2)(Cp(R))}(n)], respectively, have been identified. Complexes [{Y(AlMe(4))(mu-Cl)(C(5)Me(4)SiMe(3))}(2)] and [{Nd(AlMe(4))(mu-Cl){1,2,4-(Me(3)C)(3)C(5)H(2)}}(2)] have been characterized by X-ray structure analysis. All of the chlorinated half-sandwich complexes are inactive in isoprene polymerization. However, activation of the complexes [Ln(AlMe(4))(2)(Cp(R))] with boron-containing cocatalysts, such as [Ph(3)C][B(C(6)F(5))(4)], [PhNMe(2)H][B(C(6)F(5))(4)], or B(C(6)F(5))(3), produces initiators for the fabrication of trans-1,4-polyisoprene. The choice of rare-earth metal cation size, Cp(R) ancillary ligand, and type of boron cocatalyst crucially affects the polymerization performance, including activity, catalyst efficiency, living character, and polymer stereoregularity. The highest stereoselectivities were observed for the precatalyst/cocatalyst systems [La(AlMe(4))(2)(C(5)Me(4)SiMe(3))]/B(C(6)F(5))(3) (trans-1,4 content: 95.6 %, M(w)/M(n)=1.26) and [La(AlMe(4))(2)(C(5)Me(5))]/B(C(6)F(5))(3) (trans-1,4 content: 99.5 %, M(w)/M(n)=1.18).     

Control of electron demand in the cycloadditions of 2(H)-1,4-oxazin-2-ones

3-Methoxy-5-chloro-6-methyl-2(H)-1,4-oxazin-2-one 4, 3-methoxy-5-chloro-6-phenyl-2(H)-1,4-oxazin-2-one 5, 3-phenylsulfenyl-5-chloro-6-methyl-2(H)-1,4-oxazin-2-one 6, and 3-phenylsulfenyl-5-chloro-6-phenyl-2(H)-1,4-oxazin-2-one 7, are ambident dienes and undergo Diels-Alder cycloadditions with electron neutral, rich and deficient dienophiles.     

The nature of active sites in butadiene polymerization catalyzed by organotitanium(III) derivatives

The stereospecificity of benzyl derivatives of trivalent titanium (R_n TiX_3–n, where X = Cl, I, n = 1–3) in butadiene polymerization was studied. It was found that dibenzyltitaniumiodide is an efficient catalyst of the 1,4-cis-polymerization of butadiene and that tribenzyltitanium forms 1,2-units. In both cases all the titanium-benzyl bonds participated in the initiation reaction and the active sites were polymeric analogues of crotyl derivatives of Ti(III); namely, bis-π-oligobutadienyltitaniumiodide and tris-π-oligobutadienyltitanium. These sites are stable at room temperature. The nature of the active sites in the polymerization of butadiene with Ziegler's 1,4-stereo-specific systems Til₄ (or Til₂Cl₂) + AIR₃ are described.     

The synthesis of P(MAn-co-St)-b-PS-b-P(MAn-co-St) block copolymers by RAFT polymerization and the nanostructure of their self-assembly aggregates

A series of block copolymers of styrene, maleic anhydride and acrylic acid were synthesized by the reverse addition–fragmentation chain transfer (RAFT) process. The structure, molecular weight and polydispersity index were determined by FTIR, ¹H NMR, SEC&MALLS and DSC analysis. The results showed that the polymerization occurred in a living and controlled manner. Multiple self-assembled nanostructures of these block copolymers were investigated by transmission electron microscopy (TEM). Tetrahydrofuran (THF), N,N-dimethylformamide (DMF) and 1,4-dioxane were used as the common solvents and twice-distilled water as the selective solvent to clarify the effects of the solvent. The results revealed that with the increase of the extension degree of the core, non-spherical aggregates were easily formed, the composition of the copolymers influences the aggregation behavior, and other factors also influence the self-assembly, such as hydrolysis, temperature, annealing time, molecular architecture etc. A mechanism is proposed to illustrate the formation of the various aggregates of P(MAn-co-St)-b-PS-b-P(MAn-co-St) copolymer, which were confirmed by TEM results.     

Use of [hydroxy(tosyloxy)iodo]benzene in a novel and facile synthesis of 1,4-diaryl-2-(arylamino)but-2-ene-1,4-diones

The reaction of acetophenones 1 with [hydroxy(tosyloxy)iodo]benzene followed by treatment of the resulting α-tosyloxyacetophenones 2 thus formed with anilines 3 in the presence of sodium carbonate in ethanol provides a novel one-pot synthesis of 1,4-diaryl-2-(arylamino)but-2-ene-1,4-diones 4.     

Highly trans-1,4 selective (co-)polymerization of butadiene and isoprene with quinolyl anilido rare earth metal bis(alkyl) precursors

The N-R-quinolinyl-8-amino ligands HL(1-3) (R = 2,6-(i)Pr(2)C(6)H(3) (HL(1)), 2,6-Et(2)C(6)H(3) (HL(2)), 2,6-Me(2)C(6)H(3) (HL(3))) have been prepared, which reacted readily with one equiv. of rare earth metal tris(alkyl)s to afford the corresponding bis(alkyl) complexes L(1)Y(CH(2)SiMe(3))(2)(THF) (1) and L(1-3)Lu(CH(2)SiMe(3))(2)(THF) (2-4) via alkane elimination. Contrastingly, treatment of the in situ generated neodymium tri(alkyl)s with HL(1) afforded a mono(alkyl) neodymium complex (5). Complexes 1, 2 and 5 in combination with aluminium alkyls and organoborates established homogenous ternary systems that exhibited versatile catalytic activities and trans-1,4 selectivities for the polymerization of butadiene, depending on the types of aluminium alkyl, organoborate and rare earth metal used. Furthermore, the trans-1,4 selective copolymerization of butadiene and isoprene was achieved by using the ternary system of 1/AlMe(3)/[Ph(3)C][B(C(6)F(5))(4)]. Both the kinetics of copolymerization and the thermal behavior of the copolymers were investigated.     

Use of pyridinium ionic liquids as catalysts for the synthesis of 3,5-bis(dodecyloxycarbonyl)-1,4-dihydropyridine derivative

The synthesis of cationic amphiphilic 1,4-dihydropyridine derivative, potential gene delivery agent is achieved via an efficient multi-step sequence. The key step of this approach is a two-component Hantzsch type cyclisation of 3-oxo-2-[1-phenylmethylidene]-butyric acid dodecyl ester and 3-amino-but-2-enoic acid dodecyl ester utilising bis(2-hydroxyethyl)ether as a solvent and 1-butyl-4-methylpyridinium chloride as a catalyst. The 1,4-dihydropyridine derivative with long alkyl ester chains at positions 3 and 5 of the 1,4-DHP ring — 3,5-bis(dodecyloxycarbonyl)-2,6-dimethyl-4-phenyl-1,4-dihydropyridine was obtained in substantially higher yield with respect to classical Hantzsch synthesis. Bromination of this compound followed by nucleophilic substitution of bromine with pyridine gave the desired cationic amphiphilic 1,4-dihydropyridine.