溶胶-凝胶法制备的介体型电流式葡萄糖生物传感器

以戊二醛为交联剂，将葡萄糖氧化酶（GOD）和介体甲苯胺蓝（TBO）通过共价键作用固定于铂电极表面上的溶胶－凝胶薄膜载体上，制成了葡萄糖生物传感器；该功能化薄膜由γ－氨丙基甲基二甲氧基硅烷和四甲氧基硅在稀盐酸催化作用下通过水解－缩聚反应制得；红外光谱证实，GOD和TBO在载体上的固定化是通过交联剂分子上的醛基与GOD、TBO和载体上的氨基反应实现的，共价交联方式有效地避免了酶和介体从载体上的脱落；葡萄糖生物传感器的循环伏安特性表明，TBO能在GOD反应活性中心与铂电极表面之间进行有效的电子传递；葡萄糖生物传感器对底物葡萄糖响应的线性范围是1－8mmol/L，检出限是0．05mmol/L，寿命超过1个月。     

Nafion 膜固定的新亚甲基蓝为介体生物传感器

以Nafion膜固定的新亚甲基蓝为辣根过氧化物酶和玻碳电极间的电子传递介体,制成电流型单酶过氧化氢生物传感器和双酶葡萄糖生物传感器。探讨了工作电位、pH值、温度和干扰物质等对生物传感器的影响。     

辣根过氧化物酶在表面活性剂膜中的直接电化学

利用3种表面活性剂分别将辣根过氧化氢酶固定在裂解石墨棱面（edge-plane pyrolytic graphite,EPG)电极表面,研究了辣根过氧化物酶（HRP）中Fe(Ⅲ）／Fe（Ⅱ）电对与电极之间的直接电子传递过程以及酶催化双氧化还原过程。实验结果表明：（1）表面活性剂是一种固定酶的理想材料;（2）这种体系可能构造第三代生物传感器,对解释生物体代谢过程具有理论意义,对制备第三代生物传感器具有应用价值。     

硫堇-牛血清白蛋白氧化还原复合膜修饰葡萄糖生物传感器的研究

通过交联法和自组装法制备了一种双酶型葡萄糖生物传感器.首先以牛血清白蛋白-戊二醛为交联剂以实现对辣根过氧化物酶(HRP)的固载,再利用凝集素-糖蛋白的识别作用将葡萄糖氧化酶(GOD)分子组装到电极表面,制得双酶型的葡萄糖生物传感器.采用原子力显微镜(AFM)考察了复合膜的性质,同时采用循环伏安法和计时电流法考察了该传感...     

基于新型聚钙羧酸修饰电极的甲胎蛋白电化学免疫传感器研究

通过电聚合制得新型聚钙羧酸修饰电极并用于构建检测甲胎蛋白（AFP）的高灵敏电化学免疫传感器. 采用扫描电镜（SEM）、电化学交流阻抗（EIS）观察、表征修饰电极和AFP单克隆抗体（Ab1）固定前后的差异. 固定Ab1的电极与一定浓度的AFP、辣根过氧化物酶联AFP单克隆抗体（HRP-Ab2）反应,形成夹心型免疫复合物. 辣根过氧化物酶（HRP）催化3,3',5,5'-四甲基联苯胺（TMB）底物产生电流信号,实现AFP浓度的测定. 本检测方法灵敏度高,重现性好.     

刀豆球蛋白层层自组装双酶电极对芳香胺物质的检测

基于生物识别组装方法将辣根过氧化物酶(HRP)和葡萄糖氧化酶(Gox)固定在金电极表面制备了HRP/Gox双酶多层膜电极.HRP/Gox双酶电极通过Gox催化氧化葡萄糖"原位"产生过氧化氢的方式分析检测芳香胺物质.探讨了葡萄糖浓度和酶组装层数对双酶电极电流响应的影响.在优化条件下,制备的双酶电极在p-苯二胺的浓度为7.6 ～53.2 μmol/L时有良好的线性响应,灵敏度为146.04 mA·L/mol.常见的干扰物葡萄糖和抗坏血酸对该双酶电极无干扰.     

电聚高分子膜固定化酶生物传感器及其进展

本文将电化学聚合高分子膜固定膜酶制备的生物传感器分为以下三种主要类型，并分别 就其发展概况和发展方向进行了评述。即：以溶解氧为电子受体的的生物传感器（第一代电流型生物传感器）；以非氧介全为电子受体的生物传感器（第二代电流型生物传感器）和电子在酶和聚合高分膜之间直接进行转移的传感器（第三代电流型生物传感器）。     

基于辣根过氧化物酶/纳米金/辣根过氧化物酶/多壁纳米碳管修饰的过氧化氢生物传感器的研究

以固定在玻碳电极上的多壁纳米碳管为基底吸附辣根过氧化物酶, 再固定纳米金, 然后再结合一层辣根过氧化物酶, 利用多壁纳米碳管对辣根过氧化物酶的直接电化学催化特性及纳米金对蛋白质的强吸附能力及强的电子传导特性制备了无电子媒介体的过氧化氢生物传感器. 采用循环伏安法, 在无电子媒介体时, 该传感器对H₂O₂ 仍能具有良好的催化活性, 放大了电信号, 提高了该酶传感器的灵敏度及稳定性. 实验证明, 该传感器在H₂O₂浓度为 1.0×10^－6～ 1.0×10^－3 mol•L^－1范围内有线性响应, 线性相关系数r²＝0.9964. 并探讨了电极的稳定性、寿命及重现性.     

SiO_2/Nafion杂化膜固定酶的过氧化氢生物传感器

通过溶胶-凝胶技术制备SiO2/Nafion杂化膜并固定辣根过氧化物酶,以杂化膜中Nafion固定的亚甲基蓝为辣根过氧化物酶和玻碳电极间的电子传递介体,制成了电流型过氧化氢生物传感器。探讨了杂化膜的制备条件、工作电位、pH值、温度、干扰物质等对生物传感器的影响。该生物传感器的线性响应范围为1.0×10-6～1.6×10-4mol/L,检出限(S/N=3)为6.0×10-7mol/L,达到95%稳态响应电流用时少于15s。固定化酶对过氧化氢催化反应的米氏常数为1.129 mmol/L。     

再生丝素和聚乙烯醇混合膜的结构,性能及其葡萄糖传感器…

用扫描电镜分析了再生丝素（ＲＳＦ）和聚乙烯醇（ＰＶＡ）混合膜的形貌结构，并测定了其吸水性和机械强度，用ＲＳＦ和ＰＶＡ的混合材料把葡萄糖氧化酶固定在玻碳电极表面，制成电流型葡萄糖传感器。以１，４－苯醌为电子传递体，酶电极对葡萄糖有灵敏的响应，峰电流的增加与葡萄糖的浓度在１０＾－５－１０＾－２ｍｏｌ／Ｌ范围内良好的线性关系。用此方法制成的葡萄糖传感器物理性能好，其有效寿命长达２个月以上，该酶电极对葡萄     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.