Efficient oxidative degradation of 2-chlorophenol and 4-chlorophenol over supported CuO-based catalysts

A series of metal oxide catalysts for catalytic oxidative degradation of 2-chlorophenol (2-CP) and 4-chlorophenol (4-CP) were prepared, and the supported CuO catalysts were studied particularly. The supported CuO catalysts were characterized by XRD and NH3-TPD techniques, in which CuO/γ-Al2O3 exhibited high degradation activity. The addition of Na2O or K2O into CuO/γ-Al2O3 improved the oxidative degradation of CPs remarkably, in which Na2O was more efficient than K2O. Over CuO/γ-Al2O3-Na2O, CPs were completely converted and the liberation of the inorganic chloride from 2-CP or 4-CP reached 97% or 100% respectively at 30 ?C for 2 h. The supported CuO catalysts with good dispersion of CuO particles and less acid sites were favorable for the efficient oxidative degradation of CPs. In addition, the initial pH of the reaction solution was found to be an important factor which influenced the catalytic oxidative degradation of CPs and the initial pH of 11.2 and 9.8 was preferred for the oxidative degradation of 2-CP and 4-CP respectively over CuO/γ-Al2O3 catalyst.     

Kinetic Study of the Oxidative Addition Reaction between Methyl Iodide and [Rh(imino-β-diketonato)(CO)(PPh)3] Complexes,Utilizing UV–Vis,IR Spectrophotometry,NMR Spectroscopy and DFT Calculations

The oxidative addition of methyl iodide to [Rh(β-diketonato)(CO)(PPh)₃] complexes, as modal catalysts of the first step during the Monsanto process, are well-studied. The β-diketonato ligand is a bidentate (BID) ligand that bonds, through two O donor atoms (O,O-BID ligand), to rhodium. Imino-β-diketones are similar to β-diketones, though the donor atoms are N and O, referred to as an N,O-BID ligand. In this study, the oxidative addition of methyl iodide to [Rh(imino-β-diketonato)(CO)(PPh)₃] complexes, as observed on UV–Vis spectrophotometry, IR spectrophotometry and NMR spectrometry, are presented. Experimentally, one isomer of [Rh(CH₃COCHCNPhCH₃)(CO)(PPh₃)] and two isomers of [Rh(CH₃COCHCNHCH₃)(CO)(PPh₃)] are observed—in agreement with density functional theory (DFT) calculations. Experimentally the [Rh(CH₃COCHCNPhCH₃)(CO)(PPh₃)] + CH₃I reaction proceeds through one reaction step, with a rhodium(III)-alkyl as the final reaction product. However, the [Rh(CH₃COCHCNHCH₃)(CO)(PPh₃)] + CH₃I reaction proceeds through two reaction steps, with a rhodium(III)-acyl as the final reaction product. DFT calculations of all the possible reaction products and transition states agree with experimental findings. Due to the smaller electronegativity of N, compared to O, the oxidative addition reaction rate of CH₃I to the two [Rh(imino-β-diketonato)(CO)(PPh)₃] complexes of this study was 7–11 times faster than the oxidative addition reaction rate of CH₃I to [Rh(CH₃COCHCOCH₃)(CO)(PPh₃)].     

A computational study on the mechanism for the GaCl3-catalyzed [4+1] cycloaddition of α,β-unsaturated ketone and 2,6-dimethylphenyl isocyanide

The reaction of the GaCl₃-catalyzed [4+1] cycloaddition of α,β-unsaturated ketone with 2,6-dimethylphenyl isocyanide leading to unsaturated γ-lactone derivative has been investigated using the density functional theory with the B3LYP hybrid functional. According to our calculations we found that the reaction is stepwise and exothermic. The reaction proceeds via three steps. The first step is the coordination of GaCl₃ to the oxygen atom in mesityloxide leading to a more electrophilic C3 atom. At the second step, 2,6-dimethylphenyl isocyanide attacks mesityloxide to form the C3-C6 bond with GaCl₃ activator, which is the rate-limiting step. Finally, the C6-O bond is formed to give the five-member cycle product due to the attack of the C6 atom to the O atom. In addition, our calculations also suggest that GaCl₃ activator can be easily detached from the product. The theoretical results are in good agreement with the recent experimental observations.     

Oxidative addition of methyl iodide to [Rh(PhCOCHCOPh)(CO)(P(OCH2)3CCH3)]: an experimental and computational study

The reaction rate of the oxidative addition and CO insertion steps of methyl iodide with [Rh(PhCOCHCOPh)(CO)(P(OCH₂)₃CCH₃)] are presented. Large negative experimental values for the activation entropy and results from a density functional theory computational chemistry study indicated trans addition of the CH3I to [Rh(PhCOCHCOPh)(CO)(P(OCH₂)₃CCH₃)]. A study of the molecular orbitals gives insight into the flow of electrons during the oxidative addition reaction. CO insertion leads to a square pyramidal [Rh(PhCOCHCOPh)(P(OCH₂)₃CCH₃)(COCH₃)(I)] acyl product with the COCH3 moiety in the apical position. The strong electron donation of the P(OCH₂)₃CCH₃ ligand accelerates the oxidation addition step of methyl iodide to [Rh(PhCOCHCOPh)(CO)(P(OCH₂)₃CCH₃)] by ca. 265 times faster (at 35°C) than that of the Monsanto catalyst, but inhibits the CO insertion step.     

Rapid, efficient, room temperature aromatization of Hantzsch-1,4-dihydropyridines with vanadium(V) salts: superiority of classical technique versus microwave promoted reaction

The aromatization of 1,4-dihydropyridines (1,4-DHPs) employing group 4 (Zr and Hf) and 5 (V, Nb, Ta) elements of periodic system has been studied. The reaction with VOCl₃ in dichloromethane at room temperature afforded products, substituted pyridines, in high-to-excellent yield. For the first time, the formation of charge-transfer complexes (CTCs) has been evidenced in preorganization step between 1,4-DHP and oxidant before electron transfer. The CTC has been formed only in neutral solvents such as dichloromethane and is characterized by intensive coloration. The aromatization of 1,4-DHP with V₂O₅ in refluxing acetic acid has found to be superior over microwave promoted reaction in solventless media. The only reasonable explanation was found in polymeric structure of V₂O₅, which slowly transfer energy of microwaves needed for the activation of the reactants. The solvent polarity dependent oxidative dealkylation of 4-n-propyl-1,4-DHP has been discovered. Unexpectedly, the reaction in acetic acid afforded only 33% of dealkylated product compared to 91% obtained in dichloromethane under the same reaction conditions.     

Computational study of the transmetalation process in the Suzuki-Miyaura cross-coupling of aryls

The transmetalation step of the Suzuki-Miyaura cross-coupling between aryl groups is analyzed by means of DFT calculations with the Becke3LYP functional. The halide considered is Ph-Br, and the organoboronic acid is Ph-B(OH)₂. The model catalyst is Pd(PH₃)₂, and the base, OH⁻. The transmetalation is considered to start from the Pd(Ph)(PH₃)₂Br complex, the product of the oxidative addition. The results are compared with those of a previous study on the analogous reaction with vinyl groups, and it is shown that the reaction mechanism is very similar.     

Influence of the texture of chromia catalysts on their activity in synthesis of 2-methylthiophene

The texture of Cr₂O₃-K₂O/Al₂O₃catalysts containing oxides of rare earth elements (REE) was studied. The catalysts are used for the synthesis of 2-methylthiophene by the reaction of H₂S with n-pentane or piperilene. The heterocyclization of n-pentane is a consecutive reaction involving a step of dehydrogenation of initial hydrocarbon. At this step the texture of the catalyst affects the yield of 2-methylthiophene. The yield of 2-methylthiophene obtained from piperilene and I₂S is independent of the catalyst texture.     

Iodomethane oxidative addition and CO migratory insertion in monocarbonylphosphine complexes of the type [Rh((C6H5)COCHCO((CH2)nCH3))(CO)(PPh3)]: Steric and electronic effects

The chemical kinetics, studied by UV/Vis, IR and NMR, of the oxidative addition of iodomethane to [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)], with R = (CH₂)_nCH₃, n = 1-3, consists of three consecutive reaction steps that involves isomers of two distinctly different classes of Rh^III-alkyl and two distinctly different classes of Rh^III-acyl species. Kinetic studies on the first oxidative addition step of [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)] + CH₃I to form [Rh((C₆H₅)COCHCOR)(CH₃)(CO)(PPh₃)(I)] revealed a second order oxidative addition rate constant approximately 500-600 times faster than that observed for the Monsanto catalyst [Rh(CO)₂I₂]⁻. The reaction rate of the first oxidative addition step in chloroform was not influenced by the increasing alkyl chain length of the R group on the β-diketonato ligand: k₁ = 0.0333 ([Rh((C₆H₅)COCHCO(CH₂CH₃))(CO)(PPh₃)]), 0.0437 ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₃))(CO)(PPh₃)]) and 0.0354 dm³ mol⁻¹ s⁻¹ ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₂CH₃))(CO)(PPh₃)]). The pK_a^′ and keto-enol equilibrium constant, K_c, of the β-diketones (C₆H₅)COCH₂COR, along with apparent group electronegativities, χ_R of the R group of the β-diketones (C₆H₅)COCH₂COR, give a measurement of the electron donating character of the coordinating β-diketonato ligand: (R, pK_a^′, K_c, χ_R) = (CH₃, 8.70, 12.1, 2.34), (CH₂CH₃, 9.33, 8.2, 2.31), (CH₂CH₂CH₃, 9.23, 11.5, 2.41) and (CH₂CH₂CH₂CH₃, 9.33, 11.6, 2.22).     

Investigation of the catalytic activity of a Pd/biphenyl-based phosphine system in the Ullmann homocoupling of aryl bromides

We described Ullmann homocoupling promoted by a Pd/biphenyl-based phosphine system using DMF as solvent. Using Hammett equation it is found that the rate determining step of the reaction depends on the electronic nature of substituents of aryl bromides. Increase the rate of reaction with decreasing the electron donating of the substituent from NH₂ to H suggesting an oxidative addition step as the rate determining step. Decrease the rate of reaction with increasing the electron-withdrawing ability of the substituent from H to NO₂ indicating a reductive elimination step as the rate determining step.     

Ba2Cu3O5+δ as an intermediate phase during the synthesis of YBa2Cu4O8

We propose a reaction model for the synthesis of YBa₂Cu₄O₈ under normal pressure conditions, which contains 4 partial reaction steps. In a first step bariumnitrate and copperoxide react to Ba₂Cu₃O_5+δ. This substance will be formed for each mixtures Ba:Cu=2∶3...3∶2. The following two partial reaction steps are connected to Ba₂Cu₃O_5+δ, which reacts with Y₂O₃ and CuO to YBa₂Cu₄O₈ or decomposes to BaCuO₂ and CuO. In a last step parts of BaCuO₂ reacts with Y₂O₃ and CuO to YBa₂Cu₄O₈.     

Oxidative cleavage of α-sulfonyl ketones to carboxylic acids with Ce(NH4)2(NO3)6

Tandem oxidative cleavage of α-sulfonyl arylketones 2 with the combination of Ce(NH₄)₂(NO₃)₆ and O₂ in MeCN afforded carboxylic acids 3 in moderate to good yields. The plausible reaction mechanism has been discussed.     

A Fluorescent Molecular Probe for the Detection of Hydrogen Based on Oxidative Addition Reactions with Crabtree‐Type Hydrogenation Catalysts

A Crabtree‐type Ir^I complex tagged with a fluorescent dye (bodipy) was synthesized. The oxidative addition of H₂ converts the weakly fluorescent Ir^I complex (Φ=0.038) into a highly fluorescent Ir^III species (Φ=0.51). This fluorogenic reaction can be utilized for the detection of H₂ and to probe the oxidative addition step in the catalytic hydrogenation of olefins.     

[IrCl(cod)]2-catalyzed direct oxidative esterification of aldehydes with alcohols

[IrCl(cod)]₂ catalyzed the oxidative esterification of a variety of aldehydes with methanol as a solvent in combination with K₂CO₃ under mild conditions (rt, 12 h). The oxidative esterification reaction of aliphatic aldehydes also took place with olefinic alcohols as reagents in toluene under similar conditions.     

Synthesis of branched carbasugars via photooxygenation and manganese(III) acetate free radical cyclization

Transformation of cyclohexa-1,3- and 1,4-dienes to carbasugars is described. Photooxygenation of dienes gave bicyclic endoperoxides, which were reduced with thiourea to the corresponding 1,4-diols with cis-configuration. Lactonization of the remaining double bond by oxidative addition of acetic acid to the double bond in the presence of Mn(OAc)₃ followed by lactone ring-opening reaction gave the target branched carbasugars.     

Direct Evidence for Intermolecular Oxidative Addition of σ(SiSi) Bonds to Gold

Oxidative addition plays a major role in transition‐metal catalysis, but this elementary step remains very elusive in gold chemistry. It is now revealed that in the presence of GaCl₃, phosphine gold chlorides promote the oxidative addition of disilanes at low temperature. The ensuing bis(silyl) gold(III) complexes were characterized by quantitative ³¹P and ²⁹Si NMR spectroscopy. Their structures (distorted Y shape) and the reaction profile of σ(Si? Si) bond activation were analyzed by DFT calculations. These results provide evidence for the intermolecular oxidative addition of σ(Si? Si) bonds to gold and open promising perspectives for the development of new gold‐catalyzed redox transformations.     

Direct Evidence for Intermolecular Oxidative Addition of σ(Si?Si) Bonds to Gold

Oxidative addition plays a major role in transition‐metal catalysis, but this elementary step remains very elusive in gold chemistry. It is now revealed that in the presence of GaCl₃, phosphine gold chlorides promote the oxidative addition of disilanes at low temperature. The ensuing bis(silyl) gold(III) complexes were characterized by quantitative ³¹P and ²⁹Si NMR spectroscopy. Their structures (distorted Y shape) and the reaction profile of σ(Si Si) bond activation were analyzed by DFT calculations. These results provide evidence for the intermolecular oxidative addition of σ(Si Si) bonds to gold and open promising perspectives for the development of new gold‐catalyzed redox transformations.     

Microscopic Reactivity of Phenylferrate Ions toward Organyl Halides

Despite its practical importance, organoiron chemistry remains poorly understood due to its mechanistic complexity. Here, we focus on the oxidative addition of organyl halides to phenylferrate anions in the gas phase. By mass-selecting individual phenylferrate anions, we can determine the effect of the oxidation state, the ligation, and the nuclearity of the iron complex on its reactions with a series of organyl halides RX. We find that Ph₂Fe(I)⁻ and other low-valent ferrates are more reactive than Ph₃Fe(II)⁻; Ph₄Fe(III)⁻ is inert. The coordination of a PPh₃ ligand or the presence of a second iron center lower the reactivity. Besides direct cross-coupling reactions resulting in the formation of RPh, we also observe the abstraction of halogen atoms. This reaction channel shows the readiness of organoiron species to undergo radical-type processes. Complementary DFT calculations afford further insight and rationalize the high reactivity of the Ph₂Fe(I)⁻ complex by the exothermicity of the oxidative addition and the low barriers associated with this reaction step. At the same time, they point to the importance of changes of the spin state in the reactions of Ph₃Fe(II)⁻.     

COORDINATION CHEMISTRY OF DITHIAZOLYL RADICALS

Reaction of benzo-1,2,3-dithiazolyl, 1, with Pt(PPh₃)₄ has been shown to produce the aminothiolate complex (amt)Pt(PPh₃)₂ [amt = HNC₆H₄S], via oxidative addition of 1 to Pt(PPh₃)₂ followed by S-abstraction by PPh₃. Semi-empirical calculations (AM1 and EHT) have been used to probe the oxidative addition step of this reaction. These studies clearly reveal that close approach of 1 to Pt(PR₃)₂ induces electron transfer from Pt(PR₃)₂ to 1 with concomitant ring opening at the S─N bond and coordination to the metal centre. The SOMO of this complex retains the π* character of the dithiazolyl ring.     

Mechanistic pathways for oxidative addition of aryl iodides to the low-ligated diethanolamine palladium(0) complex in phosphine-free Heck reactions

A set of reactions of different activated olefins and aryl iodides with the trans-dichlorobis(diethanolamine-N)palladium(II) complex (trans-[PdCl₂(DEA)₂]) as a precatalyst was performed, in the presence of diethanolamine (DEA) as a weak base, and NaOEt as a strong base. It was established that the presence of NaOEt slightly lowered the yields, but significantly accelerated the reactions. This experimental finding is in agreement with our computational investigation that shows that significantly higher activation barrier is required for the preactivation reaction in the presence of a weak base than in the presence of a strong base. The reaction between the catalytically active DEA-Pd(0)-Cl complex, formed in the preactivation reaction, and iodobenzene was investigated using density functional theory. Two mechanisms for the oxidative addition of the activated complex were found. The first mechanism is based on a nucleophilic attack of Pd on I of iodobenzene, and yields an intermediate tetracoordinated Pd complex (aI2). The second mechanism begins with a nucleophilic attack of Pd on the benzene ring, and yields a tricoordinated intermediate complex (bI4). It was concluded, on the basis of structural and energetical properties of aI2 and bI4, that the second mechanism is significantly more favorable. It was shown that the oxidative addition requires noticeable lower activation energy than that required for the preactivation process. Thus, our investigations indicate that oxidative addition is not the rate determining step for the Heck reactions investigated in this work, but preactivation step.     

Kinetics of Synthesis of Ba1.0Co0.7Fe0.2Nb0.1O3-δ through Solid-Solid Reaction

The mechanism of solid-solid reaction between BaCO₃ and Co₃O₄/Fe₂O₃/Nb₂O₅ has been investigated by means of non-isothermal thermogravimetry and differential scanning calorimetry (DSC) under flowing air gas conditions at atmospheric pressure with a new solid-solid reaction model. The effects of high speed agitating mixing and ball-milling mixing processes on the synthesis kinetics were also studied. The synthesis kinetics of Ba_1.0Co_0.7Fe_0.2Nb_0.1O_3-δ from the BaCO₃ and Co₃O₄/Fe₂O₃/Nb₂O₅ particles was calculated by applying the modified model. The results indicated that the overall reaction process was considered involving two stages: addition reaction between BaCO₃ and Co₃O₄/Fe₂O₃/Nb₂O₅ particles in the first stage and solution reaction between BaCoO₃, BaFeO₃, and BaNbO₃ to form a homogeneous Ba_1.0Co_0.7Fe_0.2Nb_0.1O_3-δ phase in the second stage. The new model matched well with the experimental data. The apparent activation energy of addition reaction stage of the high speed agitating mixing sample was estimated to be 376.76 kJ·mol⁻¹, which was only 3/4 of that of the ball-milling mixing sample (494.76 kJ·mol⁻¹). These results indicated that the high-speed agitating process could enhance atomic diffusion and facilitate the subsequent reaction, thus it is believed as a more effective, energy saving, and environmentally benign mixing process.