首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 140 毫秒
1.
The triosmium cluster 1,2-Os3(CO)10(MeCN)2 reacts rapidly with the diphosphine ligand 2,3-bis(diphenylphosphino)-N-p-tolylmaleimide (bmi) at room temperature to give bmi-bridged cluster 1,2-Os3(CO)10(bmi) (2b) as the major product, along with the chelating isomer 1,1-Os3(CO)10(bmi) (2c) and the hydride-bridged cluster HOs3(CO)9[μ-(PPh2)CC{PPh(C6H4)}C(O)N(tolyl-p)C(O)] (3) as minor by-products. All three cluster compounds have been isolated and fully characterized in solution by IR and NMR spectroscopies (1H and 31P), and X-ray crystallography in the case of 2c. Cluster 2b is unstable and readily isomerizes to 2c in quantitative yield on mild heating. The kinetics for the conversion of 2b → 2c have been measured over the temperature range of 318-348 K in toluene solution, and based on the observed activation parameters a nondissociative isomerization process that proceeds via a transient μ2-bridged phosphine moiety is presented. Near-UV photolysis of cluster 2c at room temperature affords HOs3(CO)9[μ-(PPh2)CC{PPh(C6H4)}C(O)N(tolyl-p)C(O)] (3) with a quantum yield of 0.017. The reactivity of clusters 2b, 2c, and 3 is discussed with respect to related diphosphine-substituted Os3(CO)10(P-P) clusters prepared by our groups.  相似文献   

2.
Treatment of the labile cluster 1,2-Os3(CO)10(MeCN)2 (1) with the diphosphine ligand 2,3-bis(diphenylphosphino)quinoxaline (dppq) at room temperature affords 1,2-Os3(CO)10(dppq) (2b) as the kinetic product of ligand substitution in 84% yield. 2b isomerizes to the thermodynamically more stable dppq-chelated cluster 1,1-Os3(CO)10(dppq) (2c) as the sole observable product under CO at temperatures below 358 K. The kinetics for the conversion of 2b → 2c have been investigated by NMR spectroscopy in CDCl3 over the temperature range 323-353 K, and the reaction was found to exhibit a rate law that is first order in 2b. The calculated activation parameters [ΔH≠ = 25.4(4) kcal/mol; ΔS≠ = −3(1) eu] support an intramolecular isomerization scenario, one that involves the migration of phosphine and CO groups about the cluster polyhedron. The disposition of the dppq ligand in the isomeric Os3(CO)10(dppq) clusters has been established by X-ray crystallography and 31P NMR spectroscopy. Photolysis of 2c at 366 nm leads to CO loss and ortho metalation of one of the aryl groups on the Ph2P moiety to furnish the hydride cluster HOs3(CO)9[μ-PhP(η1-C6H4)(Ph2P)quinoxaline] (3). The isomerization behavior exhibited by 2b follows that of related diphosphine-substituted Os3 clusters prepared by us.  相似文献   

3.
The reaction of the labile compound [Re2(CO)8(CH3CN)2] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re2(CO)8(C14H10N4)] (1 and 2), and the complex [Re2(CO)8(C14H10N4)Re2(CO)8] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)3 fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by 1H NMR (−50 °C, CD3COCD3), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)3 fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re2(CO)6(C14H10N4)2] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.  相似文献   

4.
Reaction of 1,3,5-trimethyl-1,3,5-triazacyclohexane [(MeNCH2)3] with Os3(CO)12 in refluxing toluene results in C-H and C-N bond activation of the (MeNCH2)3 ligand to afford three amidino cluster complexes (μ-H)Os3(CO)10[μ,η2-CH(NMe)2] (1), (μ-H)Os3(CO)9[μ3,η2-CH(NMe)2] (2), and Os2(CO)6[μ,η2-CH(NMe)2]2 (3). The controlled experiments show that thermolysis of 1 yields 2, and heating 2 in the presence of (MeNCH2)3 ligand produces 3. The molecular structures of 1 and 3 have been determined by an X-ray diffraction study.  相似文献   

5.
The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl2(CO)2{Te(CH2SiMe3)2}2] (1) by the reaction of Te(CH2SiMe3)2 and [RuCl2(CO)3]2. However, the stoichiometric reaction affords a mixture of 1 and [RuCl2(CO){Te(CH2SiMe3)2}3] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The 125Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl2(CO)3]2 only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH2SiMe3)2. Complex 1 is, however, always the main product. In these cases the 125Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.  相似文献   

6.
The compounds Ru3(CO)9(SnPh3)2(NCMe)(μ-H)2 (1), Ru3(CO)10(SnPh3)2(μ-H)2 (2), Ru(CO)4(SnPh3)2 (3) and Ru(CO)4(SnPh3)(H) (4) were obtained from the reaction of Ru3(CO)10(NCMe)2 with HSnPh3 in hexane solvent. Compounds 1, 3 and the new compound Ru3(CO)7(SnPh3)3(NCMe)2(μ-H)3 (5) were obtained from reaction of Ru3(CO)10(NCMe)2 with HSnPh3 in a CH2Cl2 and MeCN solvent mixture. Compound 2 and the new compound Ru3(CO)9(SnPh3)3(μ-H)3 (6) were obtained from reactions of 1 and 5 with CO, respectively. Compounds 2 and 6 eliminated benzene when heated to yield Ru3(CO)10(μ-SnPh2)2 (7) and Ru3(CO)9(μ-SnPh2)3 (8) which contain bridging SnPh2 ligands. Compound 7 was found to react with to yield the adduct, (9) in 59% yield by the addition of groups to two of the Ru-Sn bonds to the bridging SnPh2 ligands. Fenske-Hall molecular orbital calculations were performed to provide an understanding of the metal-metal bonding in the clusters of 7 and 9. Compounds 1, 2, 5, 6, 7 and 9 were characterized structurally by single crystal X-ray diffraction analysis.  相似文献   

7.
A facile synthesis of the novel selenium-capped trimolybdenum and tritungsten ring carbonyl clusters [Se2M3(CO)10]2− (M = Mo, 1; W, 4) have been achieved. The selenium-capped trimolybdenum cluster compound [Et4N]2[Se2Mo3(CO)10] ([Et4N]2[1]) can be obtained from the reaction of the trichromium cluster compound [Et4N]2[Se2Cr3(CO)10] with 4 equiv. of Mo(CO)6 in refluxing acetone. On the other hand, when [Et4N]2[Se2Cr3(CO)10] reacted with 4 equiv. of W(CO)6 in refluxing acetone, the planar cluster compound [Et4N]2[Se2W4(CO)18] ([Et4N]2[3]) was isolated, which could further transform to the tritungsten cluster compound [Et4N]2[Se2W3(CO)10] ([Et4N]2[4]) in good yield. Alternatively, clusters 1 and 4 could be formed from the reactions of the monosubstituted products [Et4N]2[Se2Cr2M(CO)10] (M = Mo; W, [Et4N]2[2]) with 3 equiv. of M(CO)6 in acetone, respectively. Complexes 1-4 are fully characterized by IR, 77Se NMR spectroscopy, and single-crystal X-ray analysis. Clusters 1, 2, and 4 are isostructural and each display a trigonal bipyramidal structure with a homometallic M3 ring (M = Mo, 1; W, 4) or a heterometallic Cr2W ring that is further capped above and below by μ3-Se atoms. Further, the intermediate planar complex 3 exhibits a Se2W2 square with each Se atom externally coordinated to one W(CO)5 group. This paper describes a systematic route to a series of selenium-capped trimetallic carbonyl clusters and the formation and the structural features of the resultant clusters are discussed.  相似文献   

8.
The reaction of the formyl-capped cluster HC(O)CCo3(CO)9 (1) with the diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) in the presence of added Me3NO leads to the production of the disubstituted cluster HC(O)CCo3(CO)7(bpcd) (2). Thermolysis of 2 in toluene at 60 °C gives the methylidyne-capped cluster HCCo3(CO)7(bpcd) (4) and the phosphido-bridged cluster Co3(CO)7[μ2,η2,η1-P(Ph)CC(PPh2)C(O)CH2C(O)] (5). Cluster 4 has been independently prepared from HCCo3(CO)9 and bpcd and shown to serve as the precursor to 5. The new clusters 2, 4, and 5 have been isolated and characterized in solution by IR and NMR (1H and 31P) spectroscopies and their solid-state structures have been established by X-ray diffraction analyses. Both clusters 2 and 4 contain 48e- and exhibit triangular Co3 cores with a chelating and bridging bpcd ligand in the solid state, respectively. The structure of 5 provides unequivocal support for the loss of the methylidyne capping ligand and P-Ph bond cleavage attendant in the activation of 4 and confirms the presence of the face capping seven-electron μ2,η2,η1-P(Ph)CC(PPh2)C(O)CH2C(O) ligand in the final product. The fluxionality displayed by the bpcd ligand in clusters 2 and 4 and the decarbonylation behavior of the formyl moiety in the former cluster are discussed relative to related alkylidyne-capped Co3 derivatives.  相似文献   

9.
Knoevenagel condensation of 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) with thiophene-2-carboxaldehyde furnishes the second-generation unsaturated diphosphine ligand 2-(2-thienylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (1, tbpcd) in high yield. The substitution chemistry of the rhenium compounds BrRe(CO)5 and BrRe(CO)3(THF)2 with tbpcd has been investigated and found to produce fac-BrRe(CO)3(tbpcd) (2). Compounds 1 and 2 have been isolated and fully characterized in solution by IR and NMR (1H and 31P) spectroscopies, in addition to mass spectrometry, and X-ray crystallography. The redox properties of 1 and 2 have been examined by cyclic voltammetry, and these data are discussed relative to the results obtained from extended Hückel MO calculations and emission spectroscopic studies, as well as related ligand derivatives previously prepared by us. Our data indicate that the lowest excited state in tbpcd and fac-BrRe(CO)3(tbpcd) arises from a π → π∗ intraligand (IL) transition confined exclusively to the tbpcd ligand.  相似文献   

10.
Reactions of the labile compound [Re2(CO)8(MeCN)2] with thiazole and 4-methylthiazole in refluxing benzene afforded the new compounds [Re2(CO)7{μ-2,3-η2-C3H(R)NS}{η1-NC3H2(4-R)S}(μ-H)] (1, R = H; 2, R = CH3), [Re2(CO)6{μ-2,3-η2-C3H(R)NS}{η1-NC3H2(4-R)S}2(μ-H)] (3, R = H; 4, R = CH3) and fac-[Re(CO)3(Cl){η1-NC3H2(4-R)S}2] (5, R = H; 6, R = CH3). Compounds 1 and 2 contain two rhenium atoms, one bridging thiazolide ligand, coordinated through the C(2) and N atoms and a η1-thiazole ligand coordinated through the nitrogen atom to the same Re as the thiazolide nitrogen. Compounds 3 and 4 contain a Re2(CO)6 group with one bridging thiazolide ligand coordinated through the C(2) and N atoms and two N-coordinated η1-thiazole ligands, each coordinated to one Re atom. A hydride ligand, formed by oxidative-addition of C(2)-H bond of the ligand, bridges Re-Re bond opposite the thiazolide ligand in compounds 1-4. Compound 5 contains a single rhenium atom with three carbonyl ligands, two N-coordinated η1-thiazole ligands and a terminal Cl ligand. Treatment of both 1 and 2 with 5 equiv. of thiazole and 4-methylthiazole in the presence of Me3NO in refluxing benzene afforded 3 and 4, respectively. Further activation of the coordinated η1-thiazole ligands in 1-4 is, however, unsuccessful and results only nonspecific decomposition. The single-crystal XRD structures of 1-5 are reported.  相似文献   

11.
Reaction between Os[B(OEt)2]Cl(CO)(PPh3)2 and 1,2-ethanediol in the presence of Me3SiCl (1 equivalent) leads to the tethered boryl complex, Cl(CO)(PPh3)2 (1), in which one ethoxy substituent on the boryl ligand is exchanged with one hydroxy group of the 1,2-ethanediol leaving the other OH group available to coordinate to osmium, so giving a six coordinate complex. This formulation is confirmed by crystal structure determination. The same reactants, but with 2 equivalents of Me3SiCl, lead to the yellow, coordinatively unsaturated complex, OsCl(CO)(PPh3)2 (2). Complex (2) adds CO to give OsCl(CO)2 (PPh3)2 (3). Crystal structure determinations of 2 and 3 reveal a very marked difference in the Os-B distances found in the five coordinate complex 2 (2.043(4) Å) and the six coordinate complex 3 (2.179(7) Å). In a reaction similar to that used for forming 2 but with 1,3-propanediol replacing 1,2-ethanediol, the product is OsCl(CO)(PPh3)2 (4). The crystal structure for 4 is also reported.  相似文献   

12.
Reaction between Os(CO)2(PPh3)3 and Me3SnH produces Os(SnMe3)H(CO)2(PPh3)2 (1). Multinuclear NMR studies of solutions of 1 reveal the presence of four geometrical isomers, the major one being that with mutually cis triphenylphosphine ligands and mutually trans CO ligands. Os(SnMe3)H(CO)2(PPh3)2 undergoes a redistribution reaction, at the trimethylstannyl ligand, when treated with Me2SnCl2 giving Os(SnMe2Cl)H(CO)2(PPh3)2 (2). Solutions of 2 again show the presence of four isomers but now the major isomer is that with mutually trans triphenylphosphine ligands and mutually cis CO ligands. The redistribution reaction of 1 with SnI4 produces Os(SnMeI2)H(CO)2(PPh3)2 (3) which exists in solution as only one isomer, that with mutually trans triphenylphosphine ligands and mutually trans CO ligands. Treatment of 3 with I2 cleaves the Os-H bond with retention of geometry giving Os(SnMeI2)I(CO)2(PPh3)2 (4). The crystal structure of 4 has been determined. No isomerization of the trans dicarbonyl complex 4 occurs when 4 is heated, instead there is a formal loss of “MeSnI” and formation of OsI2(CO)2(PPh3)2 (5).  相似文献   

13.
The reaction of [Ru(CO)2(PPh3)3] (1) with o-styryldiphenylphophine (SP) (2) gave [Ru(CO)2(PPh3)(SP)] (3) in 83% yield. This styrylphosphine ruthenium complex 3 can also be synthesized by the reaction of [Ru(p-MeOC6H4NN)(CO)2(PPh3)2]BF4 (4) with NaBH4 and 2 in 50% yield. When “Ru(CO)(PPh3)3” generated by the reaction of [RuH2(CO)(PPh3)3] (8) with trimethylvinylsilane reacted with 2, [Ru(CO)(PPh3)2(SP)] (10) was produced in moderate yield as an air sensitive solid. The spectral and X-ray data of these complexes revealed that the coordination geometries around the ruthenium center of both complexes corresponded to a distorted trigonal bipyramid with the olefin occupying the equatorial position and the C-C bonding in the olefin moiety in 3 and 10 contained a significant contribution from a ruthenacyclopropane limiting structure. Complexes 3 and 10 showed catalytic activity for the hydroamination of phenylacetylene 11 with aniline 12. Ruthenium complex 3 in the co-presence of NH4PF6 or H3PW12O40 proves to be a superior catalyst system for this hydroamination reaction. In the case of the reaction using H3PW12O40 as an additive, ketimines (13) was obtained in 99% yield at a ruthenium-catalyst loading of 0.1 mol%. Some aniline derivatives such as 4-methoxy, 4-trifluoromethyl-, and 4-bromoanilines can also be used in this hydroamination reaction.  相似文献   

14.
The reaction of [CpCr(CO)3]2 (Cp = η5-C5H5) (1) with 1 mol equivalent of 2,5-dimercapto-1,3,4-thiadiazole (DMcTH2) at ambient temperature led to the isolation of a reddish-brown crystalline solid of CpCr(CO)3(η1-DMcTH) (5) and a green solid of CpCr(CO)3H (2) in yields of ca. 28% and 30%, respectively, along with some [CpCr(CO)2]2 (3) and [CpCr(CO)2]2S (4). The reaction of 1 with 1 mol equivalent of vinylene trithiocarbonate (SCS(CH)2S) (VTTC) at 90 °C led to the isolation of a red crystalline solid of CpCr(CO)2(η2-SCHSC2H2) (6) in ca. 15% yield while the reaction of 1 with isopropylxanthic disulfide ((CH3)2CHOCS2)2 resulted in the formation of CpCr(CO)2(η2-S2COCH(CH3)2) (8) in ca. 80% yield. The complexes 5, 6 and 8 have been determined by single crystal X-ray diffraction analysis.  相似文献   

15.
A PNA monomer containing thymine as nucleobase (1) was synthesized, characterized and coupled to the pyrazolyl containing ligand 3,5-Me2pz(CH2)2N((CH2)3COOH)(CH2)2NHBoc (2) and to a modified cysteine S-(carboxymethyl-pentafluorphenyl)-N-[(trifluor)carbonyl]-l-cysteine methyl ester (3) yielding the bifunctional chelators 6 and 7, respectively. Reactions of 6 and 7 with the Re(I) tricarbonyl starting material [Re(CO)3(H2O)3]Br afforded the complexes fac-[Re(CO)3(κ3-6)]+ (8) and fac-[Re(CO)3(κ3-7)] (9), respectively. The identity of 8 and 9 has been established based on IR spectroscopy, elemental analysis, ESI-MS spectrometry and HPLC. The multinuclear NMR spectroscopy (1H, 13C, g-COSY, g-HSQC) has also been very informative in the case of complex 8, showing the presence of rotamers in solution. For 9 the NMR spectrum was too complex due to the presence of rotamers and diastereoisomers. The radioactive congeners of complexes 8 and 9, fac-[99mTc(CO)3(κ3-6)]+ (8a) and fac-[99mTc(CO)3(κ3-7)] (9a), have been prepared by reacting the precursor fac-[99mTc(CO)3(H2O)3]+ with the corresponding ligands being their identity established by comparing their HPLC chromatograms with the HPLC of the rhenium surrogates.  相似文献   

16.
Reactions of 1,2,3,4-tetraphenyl-1,2,3,4-tetraphospholane (I) with triruthenium dodecacarbonyl at different temperatures result in the cleavage of P-P bonds and even P-C bond(s) in I to afford a series of new ruthenium cluster derivatives containing phosphido and phosphinidene ligands: a penta-ruthenium wing-tip bridged butterfly cluster [Ru5(CO)11(μ4-PPh)(μ3-PPh){(μ4-η2-(PPh)2CH2}] (1), a hepta-ruthenium polyhedral (consisting of two fused square pyramids with a co-apex) cluster [Ru7(CO)15(μ4-PPh)2{(μ2-PPh)2CH2}](2), a linked penta-ruthenium cluster [Ru4(CO)10(μ4-PPh)(μ3-PPh)2(μ3-η2-PPhCH2)Ru(CO)3] (3), and a hepta-nuclear polyhedral (consisting of two fused square pyramids with different apexes) cluster [Ru7(CO)15(μ4-PPh)2{(μ2-PPh)2CH2}](4). Clusters 2 and 4 are isomeric and differ only in the connection of the two square pyramids in the Ru7 polyhedron. All the newly obtained clusters have been fully characterized by spectroscopic (IR, FABMS, 1H- and 31P-NMR spectroscopy) and analytical techniques, and their molecular structures are established by single crystal X-ray diffraction analysis.  相似文献   

17.
Reaction between Os(CO)2(PPh3)3 and 3,3-diphenylcyclopropene under quartz-halogen irradiation leads to C(sp2)-H bond activation and the formation of the 3,3-diphenylcyclopropenyl complex, OsH[C3H(Ph-2)2](CO)2(PPh3)2 (1). When complex 1 is heated there is ring-opening of the cyclopropene ring and rearrangement to the 3-phenylindenyl complex, OsH[C9H6(Ph-3)](CO)2(PPh3)2 (2). Compound 1 reacts with HCl forming the 2,2-diphenylcyclopropyl complex, OsCl[C3H3(Ph-2)2](CO)2(PPh3)2 (3). Reaction of either 1 or 3 with excess HCl leads to reversible formation of the hydroxycarbene complex, OsCl2[C(OH)C3H3(Ph-2)2](CO)(PPh3)2 (4), through protonation of the acyl group formed by a migratory insertion reaction involving a carbonyl ligand and the σ-bound 2,2-diphenylcyclopropanyl ligand. An X-ray crystal structure determination of 2 is reported.  相似文献   

18.
The reaction of Mn2(CO)10 with tert-butyl isocyanide in the presence of 10 bar of carbon monoxide leads to the formation of cis- and trans-[Mn(tBuNC)4(CN)(CO)], 1a and 1b, in good yields together with [Mn(tBuNC)6]CN (2), as a minor product. Nevertheless, the reaction pathway highly depends on the reaction conditions. An interesting side-product is obtained, if chloroform is used during the workup procedure. Compound 3 is composed of cationic [Mn(tBuNC)5(CO)] units as well as dinuclear anionic [Mn(tBuNC)4(CO)(μ-CN)MnCl3] moieties. If no additional CO pressure is applied to the system, the organic product N,N′-di-tert-butyl-3,5-bis-tert-butylimino-4-phenyl-cyclopent-1-ene-1,2-diamine (4), is formed in considerable amount. Compound 4 most probably is produced via a double benzylic C-H activation of the solvent toluene and the oligomerization of four isocyanide moieties. The reaction of 1b with Co(NO3)2 leads to the isolation of the trinuclear cyanide bridged coordination compound {[Mn(tBuNC)4) (CO) (μ-CN)]2Co(NO3)2}, 5, in which the cobalt atoms are tetrahedrally surrounded by the two cyanide ligands and the η1-coordinated nitro groups. In contrast to the reaction of 1b, treatment of the dicyano complexes cis- or trans-[Ru(tBuNC)4(CN)2] with Co(NO3)2 results in the formation of the coordination polymers {[Ru(tBuNC)4(CN)2]Co(NO3)2}n, 7 (trans) and 9 (cis). All new compounds are characterized by X-ray diffraction experiments.  相似文献   

19.
[Cp4Fe4(CO)4] (1) reacts with p-BrC6H4Li and MeOH in sequence to afford the functionalized cluster [Cp3Fe4(CO)4(C5H4-p-C6H4Br)] (2), while the reaction of 2 with n-BuLi and MeOH produces [Cp2Fe4(CO)4(C5H4Bu)(C5H4-p-C6H4Br)] (3). The double cluster [Cp3Fe4(CO)4(C5H4)]2(p-C6H4) (4) has been prepared by treatment of [Cp4Fe4(CO)4] with p-C6H4Li2 and MeOH in sequence. The electrochemistry of 2 and 4, as well as the crystal structure of 4 have been investigated.  相似文献   

20.
The first examples of bridging tin- and germanium-substituted metallocarboxylate ligands have been obtained from the reactions of Ph3SnOH and Ph3GeOH with Os3(CO)12 under basic conditions. Two products: Os3(CO)10(μ-η2-O=COSnPh3)(μ-OMe), 1 (18% yield) and Os3(CO)10(μ-OMe)(μ-OH), 2 (6.9% yield) were obtained from the reaction of Ph3SnOH with Os3(CO)12 in the presence of [Bu4N]OH in methanol solvent. The compound Os3(CO)10(μ-η2-O=COGePh3)(μ-OMe), 3 (7.3% yield) was prepared similarly by using Ph3GeOH in place of Ph3SnOH. Each of the products 1-3 were characterized structurally by single-crystal X-ray diffraction analysis. Compounds 1 and 3 each contain an μ-η2-O=COMPh3, M = Sn or Ge ligand bridging a pair of osmium atoms in a triosmium carbonyl cluster complex.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号