Synthesis and characterization of water-soluble palladium(II)-functionalized diphosphine complexes

Water-soluble functionalized bis(phosphine) ligands L (a–h) of the general formula CH₂(CH₂PR₂)₂, where for a: R = (CH₂)₆OH; b–g: R = (CH₂)_nP(O)(OEt)₂, n = 2–6 and n = 8; h: R = (CH₂)₃NH₂ ( Scheme 1), have been prepared photochemically by hydrophosphination of the corresponding 1-alkenes with H₂P(CH₂)₃PH₂. Water-soluble palladium complexes cis-[Pd(L)(OAc)₂] (1–8) were obtained by the reaction of Pd(OAc)₂ with the ligands a–h in a 1:1 mixture of dichloromethane:acetonitrile. The water-soluble phosphine ligands and their palladium complexes were characterized by IR, ¹H and ³¹P NMR. A crystallographic study of complex 1 shows that the Pd(II) ion has a square planar coordination sphere in which the acetate ligands and the diphosphine ligand deviate by less than 0.12 Å from ideal planar.     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Titanium(IV) terminal hydroxo complexes containing chelating bis(phosphine oxide) ligands

Treatment of [L_OEtTi(OTf)₃] (, OTf⁻ = triflate) with S-binapO₂ (binap = 2,2′-bis(diphenylphosphinoyl)-1,1′-binaphthyl) afforded the terminal hydroxo complex [L_OEtTi(S-binapO₂)(OH)][OTf]₂ (1). Treatment of [L_OEtTi(OTf)₃] with K(tpip) (tpip⁻ = [N(Ph₂PO)₂]⁻) afforded [L_OEtTi(tpip)(OTf)][OTf] (2) that reacted with CsOH to give [L_OEtTi(tpip)(OH)][OTf] (3). The structures of 1 and 2 have been determined.     

Dimerization of terminal alkynes catalyzed by chloro(η-pentadienyl) bis(triphenylphosphine)ruthenium(II) and kinetics of phosphine substitution

Exchange of PMe₂Ph for PPh₃ in (η⁵-pentadienyl)ruthenium{bis(triphenylphosphine)}chloride, (η⁵-C₅H₇)Ru(PPh₃)₂Cl (1) under first order conditions proceeds rapidly in THF at room temperature. A pseudo-first order rate constant of 17 ± 2 × 10⁻⁴ s⁻¹ is obtained for the reaction at 21 °C. The rate constant is essentially independent of the phosphine concentration. The activation parameters, ΔH^† = 16.1 ± 0.4 kcal mol⁻¹ and ΔS^† = −16 ± 1 cal K⁻¹ mol⁻¹ differ from those reported for phosphine exchange in CpRu(PPh₃)₂Cl (2) and (η⁵-indenyl)Ru(PPh₃)₂Cl (3). The reaction of 1 with PMe₂Ph is about 70 times faster than the reaction of 2 at 30 °C and some 40 times faster than the reaction of 3 at 20 °C. (η⁵-C₅H₇)Ru(PPh₃)₂Cl(1) is more active than the ruthenium(II) complexes 2, 3, and TpRu(PPh₃)₂Cl (4) in the catalytic dimerization of terminal alkynes with nearly quantitative conversion of PhCCH and FcCCH at ambient temperature in 24 h. The enhanced substitution rate is accompanied by >50% conversion of phenylacetylene to oligomeric products. Reaction of 1 with NaPF₆ in acetonitrile yields the cationic ruthenium(II) complex [(η⁵-C₅H₇)Ru(PPh₃)₂(CH₃CN)][PF₆] (7). The latter complex is much less active in reactions with phenylacetylene than 1 but avoids the formation of oligomeric products.     

Di-t-butyl(ferrocenylmethyl)phosphine: air-stability, structural characterization, coordination chemistry, and application to palladium-catalyzed cross-coupling reactions

Di-t-butyl(ferrocenylmethyl)phosphine (1) has been isolated and structurally characterized. This ligand was found to be reasonably air stable as a solid and it has been shown to possess electron donating ability similar to that of tri-i-propylphosphine. A palladium catalyst bearing this ligand performed room temperature Suzuki-Miyaura coupling reactions with aryl bromides. Modest Heck coupling reactivity with aryl bromides was also observed at 100 °C. Complexation of 1 with Pd₂(dba)₃ led to formation of (1)₂Pd⁰. Addition of 4-bromoanisole to solutions containing both 1 and Pd₂(dba)₃ led to formation of an oxidative addition product when 1:Pd ratios were ?1. With a 2:1 ratio of 1:Pd, monophosphine complex formation and oxidative addition were significantly inhibited.     

Preparation and crystallographic characterization of Pd(II) complexes containing imidobis(diphenylthiophosphinato) ligand

The reactions of PdCI₂(L-L) [L-L = Ph₂PCH₂PPh₂(dppm), Ph₂PCH₂CH₂PPh₂(dppe) and Ph₂PCH₂CH₂CH₂PPh₂(dppp)] with equivalent amount of (Ph₂P(S)NHP(S)Ph₂)(dppaS₂) gave the complexes [Pd(L-L)(dppaS₂-H)]ClO₄ [L-L = dppm (1), dppe (2), dppp (3)]. The different synthetic route was used for complex 2 by using of Pd(dppe)Cl₂ and K[N(PSPh₂)₂] as starting materials (2a). All of these complexes have been characterized ³¹P{¹H} NMR, IR and elemental analyses. The complexes 2, 2a and 3 were crystallographically characterized. The coordination geometry around the Pd atoms in these complexes distorted square planar. Six membered dppaS₂-H rings are twist boat conformations in three complexes.     

Diphenylphosphino(phenyl pyridin-2-yl methylene)amine palladium(II) complexes: Chemoselective alkene hydrocarboxylation initiators

The heteroditopic, P-N-chelating ligand diphenylphosphino(phenyl pyridin-2-yl methylene)amine (1) has been synthesised via a simple ‘one-pot’ procedure and its donor characteristics assessed. The neutral [MX(Y)(1-κ²-P-N)] (3, M = Rh, X = Cl, Y = CO; 4, M = Pd, X = Y = Cl; 5, M = Pd, X = Cl, Y = Me; 6, M = Pt, X = Y = Cl; 7, M = Pt, X = Cl, Y = Me; 8, M = Pt, X = Y = Me) and cationic [Pd(Me)(MeCN)(1-κ²-P-N)][Z] (9, Z = B{3,5-(CF₃)₂-C₆H₃}4; 10, Z = PF₆) complexes of 1 have been prepared and characterised. The solid-state structures of complexes 3, 4, 6 and 7 have been established by X-ray crystallography. Reactions of [PdCl(Me)(1-κ²-P-N)] towards CO and ^tBuNC have been investigated, affording the corresponding η¹-acyl (12) and -iminoacyl (14) complexes, respectively. Similar insertion chemistry is observed for the cationic derivative 9. Treatment of the acyl complex 12 with ethene at elevated pressure establishes an equilibrium between the starting material and the product resulting from insertion, 13. Under catalytic conditions, combination of palladium(II) with 1 in MeOH affords a selective initiator for the formation of 4-oxo-hexanoic acid methyl ester (15) from CO/ethene (38 bar, 90 °C).     

Synthesis, coordination studies and redox properties of a novel ditertiary phosphine bearing two ferrocenyl groups

The new ferrocenyl substituted ditertiary phosphine {FcCH₂N(CH₂PPh₂)CH₂}₂ [Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (1) was prepared, in 72% yield, by Mannich based condensation of the known bis secondary amine {FcCH₂N(H)CH₂}₂ with 2 equiv. of Ph₂PCH₂OH in CH₃OH. Phosphine 1 readily coordinates to various transition-metal centres including Mo⁰, Ru^II, Rh^I, Pd^II, Pt^II and Au^I to afford the heterometallic complexes {RuCl₂(p-cym)}₂(1) (2), (AuCl)₂(1) (3), cis-PtCl₂(1) (4), cis-PdCl₂(1) (5), cis-Mo(CO)₄(1) (6), trans,trans-{Pd(CH₃)Cl(1)}₂ (7) and trans,trans-{Rh(CO)Cl(1)}₂ (8). In complexes 2, 3, 7 and 8 ligand 1 displays a P,P′-bridging mode whilst for 4-6 a P,P′-chelating mode is observed. All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 1, 2 · 2CH₂Cl₂, 3 · CH₂Cl₂, 4 · CH₂Cl₂, 6 · 0.5CHCl₃ and 8 have been elucidated by single crystal X-ray crystallography. Electrochemical measurements have been undertaken, and their redox chemistry discussed, on both noncomplexed ligand 1 and representative compounds containing this new ditertiary phosphine.     

Synthesis, solid state structure and spectro-electrochemistry of ferrocene-ethynyl phosphine and phosphine oxide transition metal complexes

The synthesis of ferrocene-ethynyl phosphine platinum dichloride complexes based on (FcCC)_nPh_3−nP (1a, n = 1; 1b, n = 2; 1c, n = 3; Fc = ferrocenyl, (η⁵-C₅H₅)(η⁵-C₅H₄)Fe) is described. Air-oxidation of 1c afforded (FcCC)₃PO (6). Treatment of 1a-1c with [(PhCN)₂PtCl₂] (2) or [(tht)AuCl] (tht = tetrahydrothiophene) (7), respectively, gave the heterometallic transition complexes cis-[((FcCC)_nPh_3−nP)₂PtCl₂] (3a, n = 1; 3b, n = 2; 3c, n = 3) or [((FcCC)_nPPh_3−n)AuCl] (8a, n = 1; 8b, n = 2). Further treatment of these molecules with HCCMc (4a, Mc = Fc; 4b, Mc = Rc = (η⁵-C₅H₅)(η⁵-C₅H₄)Ru) in the presence of [CuI] produced trans-[((FcCC)Ph₂P)₂Pt(CCFc)₂] (5) (reaction of 3a with 4a) and [(FcCC)_nPh_3−nPAuCCMc] (n = 1: 9a, Mc = Fc; 9b, Mc = Rc; n = 2: 11a, Mc = Fc; 11b, Mc = Rc) (reaction of 4a, 4b with 8a, 8b), respectively.The structures of 3a, 5, 6, 8, 9a, and 9b in the solid state were established by single-crystal X-ray structure analysis. The main characteristic features of these molecules are the linear phosphorus-gold-acetylide arrangements, the tetra-coordination at phosphorus and the square-planar surrounding at platinum.The electrochemical and spectro-electrochemical behavior of complexes 5, 8a, 9a, 9b and [(Ph₃P)AuCCFc] was investigated in the UV/Vis/NIR. Near IR bands that are likely associated with charge transfer from the ((FcCC)Ph₂P)₂Pt or the ((FcCC)_nPh_3−nP)Au (n = 0, 1) moieties appear upon oxidation of the σ-bonded ferrocene-ethynyl groups. These bands undergo a (stepwise) blue shift as ferrocene-ethynyl substituents on the phosphine coligands are oxidized.     

Tris(N-pyrrolidinyl)phosphine substituted diiron dithiolate related to iron-only hydrogenase active site: Synthesis, characterization and electrochemical properties

A tris(N-pyrrolidinyl)phosphine (P(NC₄H₈)₃) monosubstituted complex, [(μ-pdt)Fe₂(CO)₅P(NC₄H₈)₃] (2) was synthesized as a functional model of the hydrogen-producing capability of the iron hydrogenase active site. The structure was fully characterized by X-ray crystallography. IR and electrochemical studies have indicated that the P(NC₄H₈)₃ ligand has better electron-donating ability than that of those phosphine ligands, such as PMe₃, PTA (1,3,5-triaza-7-phosphaadamantane), PMe₂Ph PPh₃, and P(OEt)₃. The electrocatalytic activity of 2 was recorded in CH₃CN in the absence and presence of weak acid, HOAc. The cathodic shift of potential at −1.98 V and the dependence of current on acid concentration have indicated that complex 2 can catalyze the reduction of protons to hydrogen at its Fe⁰Fe^I level in the presence of HOAc. IR spectroelectrochemical experiments are conducted during the reduction of 2 under nitrogen and carbon monoxide, respectively. The formation of a bridging CO group during the reduction of 2 at −1.98 V has been identified using IR spectroelectrochemical techniques, and an electrocatalytic mechanism of 2 consistent with the spectroscopic and electrochemical results is proposed.     

New synthetic route to polyphosphine ligands bearing 1,2,4,5-tetrakis(phosphino)benzene framework: structural characterizations of 1,4-(PPh2)2-2,5-(PR2)2-C6F2 (R = Ph, Pr, Et)

Reactions of 1,4-dibromo-2,5-difluorobenzene with two equivalents of lithium diisopropylamide at low temperature (T < −90 °C) followed by a quench with a slight excess of ClPPh₂ afford 1,4-dibromo-2,5-bis(diphenylphosphino)-3,6-difluorobenzene (1) in good yields. Reacting 1 with two equivalents of BuLi followed by a quench with a slight excess of ClPR₂ yield novel 1,2,4,5-tetrakis(phosphino)-3,6-difluorobenzenes 1,4-(PPh₂)₂-2,5-(PR₂)₂-C₆F₂ (R = Ph (2a); R = ⁱPr (2b); R = Et (2c)) in moderate yields. Compounds 1 and 2a-c were characterized by multinuclear NMR spectroscopy and elemental analyses. In addition, molecular structures of 2a-c have been determined by single crystal X-ray crystallography. Phosphorus atoms of PPh₂/PR₂ substituents in 2a-c are displaced from the plane of the central phenyl ring due to steric interactions with neighboring groups.     

Protonation of palladium(II)-allyl and palladium(0)-olefin complexes containing 2-pyridyldiphenylphosphine

The pendant nitrogen atom of the Ph₂PPy ligand in the Pd(II)-allyl complexes [PdCl(η³-2-CH₃-C₃H₄)(Ph₂PPy)] (1) and [Pd(η³-2-CH₃-C₃H₄)(Ph₂PPy)₂]BF₄ (3) has been protonated with methanesulfonic acid to afford the corresponding pyridinium salts [PdCl(η³-2-CH₃-C₃H₄)(Ph₂PPyH)](CH₃SO₃) (1a) and [Pd(η³-2-CH₃-C₃H₄)(Ph₂PPyH)₂](CH₃SO₃)₂(BF₄) (3a).Protonation strongly influences the ¹H and ¹³C NMR spectral parameters of the allyl moieties of 1a and 3a whose signals resonate at lower fields with respect to the parent species indicating that upon protonation Ph₂PPy becomes a weaker σ-donor and a stronger Π-acceptor. The allyl moiety, which in 1 is static, becomes dynamic in 1a, the observed syn-syn and anti-anti exchange being due to deligation of the protonated phosphine from the metal centre. Treatment of complex 3 with diethylamine in the presence of fumaronitrile gives the new Pd(0)-olefin complex [Pd(η²-fumaronitrile)(PPh₂Py)₂] (4) which has been characterized by elemental analysis and NMR spectroscopy. Low temperature protonation of 4 with methanesulfonic acid leads to the bis-protonated species [Pd(η²-fumaronitrile)(Ph₂PPyH)₂](CH₃SO₃)₂ (4a) which is stable only at temperatures <0 °C.     

New interlocked molecules generated from a podand containing urea units and imidazolium salts using an anion template

A podand containing urea units (L) was found to form interlocked structures with 2,5-dihexylamide imidazolium salts (3·X), 2,5-dihexyl imidazolium salts (4·X), and 2,5-dihexyl benzoimidazolium salts (5·X), where X=Cl⁻, Br⁻, and PF₆⁻ using anions as templates. The binding ability of L and guest molecules was evaluated by ¹H NMR titrations in CDCl₃. It was found that L could form complexes with guest molecules in the following order, 3·X > 5·X > 4·X. Stabilities of the complexes also depended on shape of the templated anions: Cl⁻>Br⁻?PF₆⁻. Hydrogen bonding and π-π stacking interactions played an important role in the self-assembling of these interlocked molecules.     

Structural diversity in the self-assembly of Ag(I) complexes containing 2-amino-5-halopyrimidine

A series of Ag(I) complexes containing the 2-amino-5-halopyrimidine ligands have been synthesized and their structures characterized by X-ray crystallography. The isomorphous complexes Ag(L-Cl)₂(CF₃SO₃) (L-Cl = 2-amino-5-chloropyrimidine), 1, and Ag(L-Br)₂(CF₃SO₃) (L-Br = 2-amino-5-bromopyrimidine), 2, are mononuclear, while [Ag(L-Br)(CF₃SO₃)]₆·6C₄H₁₀O, 3, and [Ag(L-I)(CF₃SO₃)]₆ (L-I = 2-amino-5-iodopyrimidine), 4, show cyclic self-assembly of six Ag(Ι) atoms and six L-X ligands, resulting in 24-membered metallocycles. The complex [Ag(L-I)(CF₃SO₃)]_∞, 5, forms 1D zigzag chains which are linked through C-I?Ag and Ag?O interactions to form a 3D structure. The tetranuclear complexes [Ag(L-X)(NO₃)]₄ [X = Cl, 6; Br, 7] form 16-membered metallocycles, while [Ag(L-X)(ClO₄)]_∞ [X = Cl, 8; Br, 9] exhibit helical chains. The different structure of 5 from 1 and 2 appears to be due to the stronger nucleophilic character of the iodine atom. In these complexes, the relatively smaller NO₃⁻ anions lead to the formation of tetranuclear metallocycles and the larger CF₃SO₃⁻ anions support the hexanuclear metallocycles, whereas the ClO₄⁻ anions induce the helical chains.     

Methyl-oxygen bond cleavage in hemilabile phosphine-ether ligand of ruthenium(II) complexes

The preparation and characterization are described for four ruthenium(II) complexes containing hemilabile phosphine-ether ligand o-(diphenylphosphino)anisole (Ph₂PC₆H₄OMe-o) and/or bidentate ligand diphenylphosphino-phenolate ([Ph₂PC₆H₄O-o]⁻) Ru(RCN)₂(κ²-Ph₂PC₆H₄O-o)₂ (1a: R = Me; 1b: R = Et) and [Ru(RCN)₂(κ²-Ph₂PC₆H₄O-o)(κ²-Ph₂PC₆H₄OMe-o)](PF₆) (2a: R = Me; 2b: R = Et). The ruthenium(II) phosphine-ether complexes undergo mild methyl-oxygen bond cleavage. Two different kinds reaction mechanism are proposed to describe the methyl-oxygen bond cleavage, one involving attack of anionic nucleophiles and another involving the phosphine. The new reactions define novel routes to phosphine-phenolate complexes. The structures of complexes 1a, 1b and 2a were confirmed by X-ray crystallography.     

The synthesis and single-crystal X-ray structures of palladium(II) and platinum(II) complexes of the difluorovinyl and 1-chloro-2-fluorovinyl-substituted phosphines, PPh2(Z-CFCFH) and PPh2(E-CClCFH)

The coordination chemistry of the fluorovinyl substituted phosphines PPh₂(Z-CFCFH) and PPh₂(E-CClCFH) with K₂MX₄ (M = Pd, Pt; X = Cl, Br, and I) salts has been investigated resulting in the first reported palladium(II) and platinum(II) complexes of phosphines containing partially fluorinated vinyl groups. The complexes have been characterised by a combination of multinuclear [¹H, ¹³C{¹H}, ¹⁹F, ³¹P{¹H}] NMR spectroscopy, and IR/Raman spectroscopy. The single-crystal X-ray structures of trans-[PdX₂{PPh₂(CFCFH)}₂], X = Cl (1), Br (2), I (3), trans-[PdCl₂{PPh₂(CClCFH)}₂] (4), cis-[PtX₂{PPh₂(CFCFH)}₂], X = Cl (5), Br (6), trans-[PtI₂{PPh₂(CFCFH)}₂] (7), and both cis- and trans-[PtCl₂{PPh₂(CClCFH)}₂] (8), have been determined. Results obtained from spectroscopic and crystallographic data suggest that replacement of a β-fluorine by hydrogen, whilst reducing the steric demand of the ligand, has little effect on the electronic character of the ligand. The presence of a proton in the vinyl group results in short proton-halide secondary interactions in the solid state (d(H?X) = 2.72(3) for 1, and 2.92(5) Å for 2) forming an infinite chain ribbon motif.     

Reversible oxidative addition of a diaryl diselenide to a diorganopalladium(II) complex, carbon-selenium bond formation at palladium(IV), and structural studies of palladium(II) and platinum(IV) selenolates

Methyl(4-methoxyphenyl)(2,2^′-bipyridine)palladium(II) (1) reacts with bis(4-chlorophenyl) diselenide in dichloromethane to form an equilibrium with the Pd(IV) complex Pd(SeC₆H₄Cl)₂Me(C₆H₄OMe)(bpy) (2) for which the forward reaction exhibits ΔH=−130±12 kJ mol⁻¹ and ΔS=−472±49 J K⁻¹ mol⁻¹, and with K=754±145 at −25 °C. The Pd(IV) complex is isolable at −40 °C, and when the equilibrium mixture is kept at −25 °C, a temperature at which the Pd(II) complex is stable, selective reductive elimination of Me-SeC₆H₄Cl occurs very slowly from the Pd(IV) complex to form Pd(SeC₆H₄Cl)(C₆H₄OMe)(bpy) (3). In contrast, (ClC₆H₄Se)₂ reacts with PdMe₂(dmpe) (4) [dmpe=1,2-bis(dimethylphosphino)ethane] to form Pd(SeC₆H₄Cl)Me(dmpe) (5) and Me-SeC₆H₄Cl. A second equivalent of (ClC₆H₄Se)₂ reacts with 5 to cleave the second Pd-Me bond to give Pd(SeC₆H₄Cl)₂(dmpe) (6) and Me-SeC₆H₄Cl. Similarly, PdMeTol(dmpe) (7) (Tol=4-tolyl) forms predominantly Pd(SeC₆H₄Cl)Tol(dmpe) (8) together with some Pd(SeC₆H₄Cl)Me(dmpe) (5), and 8 reacts with (ClC₆H₄Se)₂ to form Pd(SeC₆H₄Cl)₂(dmpe) (6) and Tol-SeC₆H₄Cl. Bis(4-chlorophenyl) diselenide reacts with PtTol₂(bpy) (9) (Tol=4-tolyl) to form Pt(SeC₆H₄Cl)₂Tol₂(bpy) (10) which, together with 2, has a trans-configuration for the selenolate ligands. X-ray structural studies of octahedral 10 as the solvate 10 · 3CHCl₃ and square planar 5 are reported.     

Preparation of phosphinoferrocene carboxamides from isocyanates. Synthesis and structural characterisation of palladium(II) and platinum(II) complexes with 1′-(diphenylphosphino)-1-(N-phenylcarbamoyl)ferrocene

The reaction of in situ generated 1′-(diphenylphosphino)-1-lithioferrocene with isocyanates RNCO affords the respective phosphino-carboxamides Ph₂PfcCONHR (fc = ferrocene-1,1′-diyl, R = cyclohexyl (2), and Ph (3)) in moderate yields. The coordination behaviour of 3 chosen as a representative was studied in palladium(II) and platinum(II) complexes. Depending on the metal precursor and the reaction conditions, the following compounds featuring this ligand as a P-monodentate or an O,P-chelating donor were isolated and characterised by spectroscopic methods (IR, multinuclear NMR and electrospray ionisation MS): trans-[PdCl₂(3-κP)₂] (5), trans-[PtCl₂(3-κP)₂] (6), cis-[PtCl₂(3-κP)₂] (7), [SP-4-4]-[(L^NC)PdCl(3-κP)] (8; L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹), and [SP-4-3]-[(L^NC)PdCl(3-κ²O,P)]SbF₆ (9). Besides, the crystal structures of a phosphine oxide resulting by oxidation of 2, viz Ph₂P(O)fcCONHCy (4), and of complexes 5·2Et₂O and 9 have been determined by single-crystal X-ray diffraction analysis.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

The supramolecular chemistry of metal complexes with heavily substituted imidazoles as ligands: Cobalt(II) and zinc(II) complexes of 1-methyl-4,5-diphenylimidazole

An investigation of the M^II/X⁻/L [M^II = Co, Ni, Cu, Zn; X⁻ = Cl⁻, Br⁻, I⁻, NCS⁻, NO₃⁻, N₃⁻, CH₃COO⁻; L = 1-methyl-4,5-diphenylimidazole] general reaction system towards the detailed study of the intermolecular interactions utilized for controlling the supramolecular organization and the structural consequences on the structures produced has been initiated. Three representative complexes with the formulae [Co(NO₃)₂(L)₂] (1), [Zn(NO₃)₂(L)₂] (2) and [Co(NCS)₂(L)₂]·EtOH (3·EtOH) have been synthesized and characterized by spectroscopic methods and single-crystal X-ray analysis. Compounds 1 and 2 are isomorphous (tetragonal, I4₁cd) with their metal ions in a severely distorted octahedral Co/ZnN₂O₄ environment, while 3·EtOH crystallizes in P2₁/c with a tetrahedral CoN₄ coordination. The structural analysis of 1, 2 and 3·EtOH reveals a common mode of packing among neighbouring ligands (expressed through intramolecular π–π interactions between the 4,5-diphenylimidazole moieties), enhancing thus the rigidity and stability of the complexes. The bent coordination of the two isothiocyanates in 3 [Co–NCS angles of 173.8(2) and 160.8(2)°] seems to be caused by intermolecular hydrogen bonding and crystal packing effects.