Use of ionic liquids in the platinum- and gold-catalyzed cycloisomerization of enyne systems

The platinum- and gold-catalyzed cycloisomerization of enyne systems has been carried out in various ionic liquids (ILs). In some cases, better selectivities and shorter reaction times have been observed compared to conventional conditions.     

A Facile and Efficient Solid Supported,One‐Pot Synthesis of Functionalized Piperidine Derivatives Catalyzed by Amberlite IRA400‐Cl Resin/I2/KI via Multicomponent Reaction

A facile and efficient one‐pot, solid supported synthesis of functionalized piperidine derivatives catalyzed by Amberlite IRA400‐Cl resin/I₂/KI via a multicomponent reaction of various aldehydes, aromatic amines, and 1,3‐dicarbonyl compounds has been achieved. The reaction has been carried out in a one‐pot reaction and Amberlite resin as a solid supported catalyst at room temperature. Shorter reaction time, easy workup, yield, and mild reaction condition make the novel synthetic strategy both practical and attractive.     

Coupling Reaction of Carbonyl Compounds Mediated by Gallium Metal in Aqueous Media

A simple and effective pinacol coupling of various aromatic aldehydes mediated by gallium in good yields has been carried out. The reaction is highly effective in water in the prurience of KOH or HCl and was strongly affected by the steric environ-ment surrounding the carbonyl group. Aliphaflc aldehydes, ke-tones and aromatic ketones appear inert under the same reac-tion conditions.     

Efficient catalyst-free synthesis of diversified bis (spirooxindoles) via one-pot,three-component reaction

A catalyst-free, one-pot synthesis of bis-spirooxindoles has been carried out by a three-component reaction of bis-isatins, malononitrile, and various cyclic enolizable carbonyl compounds in ethylene glycol at 100?°C. The protocol provides an easy and simple route for the synthesis of such complex compounds, in short reaction times and high yields. No chromatographic techniques have been employed for the purification of the compounds.     

Total synthesis of 3,3′,4-tri-O-methylellagic acid from gallic acid

Total synthesis of 3,3′,4-tri-O-methylellagic acid has been described from commercially available gallic acid. Construction of the crucial unsymmetric Ar-Ar bond has been carried out in various methods such as Heck coupling, Heck coupling followed by oxidation or anionic Fries rearrangement, Suzuki cross-coupling, etc., but all the attempts were unsuccessful. Then, finally it has been achieved by intramolecular Ullmann coupling reaction.     

Enantioselective copper-catalyzed conjugate addition of dialkyl zinc to nitro-olefins

[reaction: see text]The copper-catalyzed asymmetric conjugate addition of dialkylzinc onto various nitro-olefins has been carried out with excellent results. An enantiomeric excess of up to 94% was obtained using 0.5% Cu(OTf)2 and 1% of chiral trivalent phosphorus ligand.     

DTA studies on the thermal oxidation and crosslinking reactions of carboxyl-terminated polybutadiene

Studies on the thermal oxidation of carboxyl-terminated polybutadiene in the presence of antioxidants have been carried out by dynamic DTA. Bis-thioacetylacetonato nickel(II) compounds are found to be effective in inhibiting the air oxidation reaction in the polymer. The crosslinking reaction of the polymer through the double bonds present in the polymer molecule is desensitized by the antioxidants and the effect is more with N-phenyl-1-naphthylamine. An exothermic peak formed at 270°C in the presence of tris(2-methylaziridinyl-1) phosphine oxide has been identified as the curing reaction. The infrared spectra of CTPB in the presence of MAPO at various temperatures confirm the various stages of reaction.     

Water-Mediated Synthesis of Benzazole and Thiourea Motifs by Reacting Naturally Occurring Isothiocyanate with Amines

An efficient, green, and facile method has been developed for the synthesis of benzazole and thiourea analogues from naturally occurring erucin in moderate to good yields. The reaction was carried out in water without using any metal catalyst or base. The present method tolerated the various functional groups on aromatic rings and also applicable for other isothiocyanates.     

Synthesis of fluorinated N-aminoaziridines: access to new CF3-peptidomimetics

A series of fluorinated N-aminoaziridines have been synthesized by the PhI(OAc)₂-mediated aziridination procedure. The reaction was carried out with various protected hydrazides and fluorinated alkenes. The reaction was extended to alkenes bearing an amino acid and the ring opening of the CF₃–N-aminoaziridines has been investigated.     

Bromamine-T as an efficient amine source for Sharpless asymmetric aminohydroxylation of olefins

Asymmetric aminohydroxylation of various olefins was carried out using bromamine-T as nitrogen source in the presence of (DHQ)₂PHAL ligand. The new nitrogen source has been found to be effective in terms of yield and reaction time. The optical purities of the products could be obtained with up to 99% ee.     

A simple and efficient FeCl3-catalyzed direct alkylation of active methylene compounds with benzylic and allylic alcohols under mild conditions

A highly efficient FeCl₃-catalyzed alkylation of various active methylene compounds with various benzylic or allylic alcohols under mild conditions has been developed. The reaction was carried out in the presence of a catalytic amount of anhydrous FeCl₃ (10 mol %) under reflux in methylene chloride. High to excellent yields were obtained.     

Solvent effect on reaction rates: Reaction between sodium ethoxide and methyl iodide in ethanol + cyclohexane solvent systems

The kinetics of the reaction between sodium ethoxide and methyl iodide has been studied at 25°C in various cyclohexane-ethanol solvent mixtures with a cyclohexane content of 10 to 50% per volume. The determination of the rate constants att=0 were carried out by a new iterative method proposed in this investigation. The obtained results show that the reaction rate decreases with the increasing cyclohexane content. This behavior can be attributed to various solute-solvent interactions of electrostatic nature. On the other hand, the variation of ion and ion pairs rate constants with solvent composition permits the various solvation effects to be taken into account.     

Selective hydroaminomethylation of olefins using simple and efficient Rh–phosphinite complex catalyst

Hydroaminomethylation of various olefins with primary and secondary amines was carried out using a simple and efficient rhodium–phosphinite complex catalyst. The influence of various reaction parameters including the effects of temperature, pressure, catalyst loading, time and solvents has been investigated. The present protocol is general with wider substrate applicability for the synthesis of an important class of aliphatic amines and arylethylamines. High activity and selectivity for amines was achieved with a very good substrate/catalyst molar ratio (turnover number 2500) under mild reaction conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

The face selectivity of 1,3-dipolar cycloaddition reactions of 4-butyloxycarbonyl-3,4,5,6-tetrahydropyridine 1-oxide

A study of the stereo- and face selectivity of the cycloaddition reactions of a series of mono- and disubstituted alkenes with 4-butyloxycarbonyl-3,4,5,6-tetrahydropyridine 1-oxide has been carried out. Rate constants for the cycloaddition of the nitrone to methyl acrylate, styrene, and methyl methacrylate have been determined at various temperatures by ¹H NMR spectroscopy. The activation parameters indicate the concerted nature of the reaction. The 4-substituted nitrone is found to be more reactive than its unsubstituted counterpart 3,4,5,6-tetrahydropyridine 1-oxide. The addition reactions have displayed a very high degree of face selectivity (9:1), and those reactions in micellar media are found to be very efficient. Conformational analysis and peracid-induced ring opening of a cycloadduct has been carried out to give second-generation cyclic nitrones.     

Optimal process conditions for zeolite catalyzed acylation of anisole

Acylation of anisole is a commercially important reaction in the production of various fine chemicals, agrochemicals, pharmaceuticals and fragrances. Conventionally, it is carried out using the catalysts like AlCl₃, FeCl₃, ZnCl₃, HF, which suffer from major drawbacks such as larger consumption, corrosion and safety issues, waste disposal and the material handling. Hence the conventional catalysts are being replaced with solid acid catalysts like H-Beta, H-ZSM5 to overcome the above drawbacks. In this work, liquid phase acylation of anisole has been carried out employing H Beta, H ZSM-5 and HY catalysts and the process standardization at a macrolevel has been done with reference to parameters like temperature, reaction time, molar ratio of reactants, catalyst nature, Si/Al ratio of catalyst and the catalyst quantity. In addition, catalyst stability was investigated.     

Mathematical modeling of silver extraction by an emulsion liquid membrane process

A general physical model of a typical batch extraction system employing an emulsion liquid membrane process for the extraction of silver has been developed. The model takes into account the extraction reaction between the silver ion and the carrier molecules at the external interface, the diffusion of the complex in the membrane phase, the stripping reaction at the internal interface and the reaction of silver ion with the reagent, HCL, in the internal phase to yield silver chloride incapable of permeating through the membrane phase. In addition, the leakage of the internal aqueous phase to the external aqueous phase due to membrane breakage has been incorporated in this model. The batch extraction of silver using D2EHPA as a carrier has been carried out under various experimental conditions. The experimental data can be well explained by the present model.     

Effect of Different Counterions of the Manganese Salt as Catalyst on the Kinetics of Resorcinol‐Based Belousov–Zhabotinsky Reaction

Kinetic studies on the Belousov–Zhabotinsky (BZ) system with various metal ions as catalysts have been carried out for a long time, but the effect of counteranions associated with the metal ion solution used as the catalyst in the BZ reaction has not been explored. Thus, we have chosen some metal salts as catalysts having the metal ion (Mnⁿ⁺) but with various anions to study the role of different anionic moieties of catalyst on the oscillatory behavior of the resorcinol‐based BZ reaction system. It is found that organic‐type anionic moieties marginalize the role of organic substrates in the reaction system. On the other hand, the inorganic counterions of the catalyst show salting out effects, thereby increasing the ionic strength, which affects the mobility (diffusion) of the ions in our system performed under batch conditions.     

Iridium-catalyzed allylic vinylation and asymmetric allylic amination reactions with o-aminostyrenes

An Ir-catalyzed allylic vinylation reaction of allyl carbonates with o-aminostyrene derivatives has been realized, providing skipped (Z,E)-diene derivatives. With (E)-but-2-ene-1,4-diyl dimethyl dicarbonate as the substrate, an efficient enantioselective synthesis of 1-benzazepine derivatives via an Ir-catalyzed domino allylic vinylation/intramolecular allylic amination reaction has been developed. Mechanistic studies of the allylic vinylation reaction have been carried out, and the results suggest that the leaving group of the allylic precursor plays a key role in directing the reaction pathway. Screening of various allylic precursors showed that Ir-catalyzed reactions of allyl diethyl phosphates with o-aminostyrene derivatives proceed via an allylic amination pathway. A subsequent ring-closing metathesis (RCM) reaction of the amination products led to a series of enantiomerically enriched 1,2-dihydroquinoline derivatives. Their utility is indicated by an asymmetric total synthesis of (-)-angustureine.     

聚电解质中电活性物质氧化还原反应机理的现场显微红外光谱电化学研究

用现场显微红外光谱电化学方法研究了几种电活性物质,包括无机盐、有机物、无机聚合物微粒在聚电解质中的氧化还原反应及其机理。     

Multiwalled Carbon Nanotubes Supported Pd(II)‐Salen Complex: An Effective,Phosphorous‐Free,and Reusable Heterogeneous Precatalyst for the Synthesis of Diaryl Ketones

The Suzuki–Miyaura cross‐coupling reaction of aroyl chlorides and arylboronic acids has been carried out efficiently in the presence of Pd(II)‐salen@MWCNTs as an air‐moisture stable precatalyst. The influence of various parameters, such as solvent, temperature, and base on the reaction system, was studied. Furthermore, the catalyst can be easily recovered quantitatively by a simple filtration and reused for three consecutive runs without significant loss of its activity.