O(3P) + HOONO2 → products: Temperature-dependent rate constant

The title reaction was studied in a stirred-flow reactor at six temperatures ranging from 228 to 297 K and for pressures near 2 torr. The experiments were performed under O-atom-rich conditions, and the HOONO₂ concentration was monitored with a modulated molecular-beam mass spectrometer. O-atom concentrations were measured by titration with NO₂ and by monitoring the portion of O₂ dissociated in the microwave discharge. A weighted least-squares analysis gives (k ± 1σ) = (7.0 ± 12.2) × 10^?11 exp(-3369 ± 489/T) cm³/s, where the uncertainties are 1 standard deviation (six temperatures) the covariance was σ_AB = 5.97 × 10^?8. Due to the possible presence of systematic errors, the uncertainty in the rate constant could be as great as a factor of 2 over the entire temperature range.     

An Ab initio determination of the rate constant for H2 + CN → H + HCN

The reactants, products, and saddle point for the reaction H₂ + CN → H + HCN have been studied by ab initio calculations. The computed structures, frequencies, and energetics are compared directly to available measurements and, indirectly, to experimental rateconstants. The theoretical rate constants used in the comparison are calculated with conventional transition state theory. By reduction of the computed reaction barrier to 4.1 kcal mol,^?1 good agreement with experimental rate constants is obtained over a 3250-K temperature range. This computed rate constant is well represented by the form 4.9 × 10_?18 T^2.45 e^{?1, 126/T} over the temperature range of 250 K–3500 K. Substantial reaction rate curvature is found due to low-frequency bending modes at the saddle point. The results for this reaction are compared to other abstraction reactions involving H atom transfer to identify correlations between reaction exothermicity and both abstraction barriers and reaction rate curvature.     

Rate constant for the reaction Cl + HO2NO2 → products

The total rate constant for the reaction of Cl atoms with HO₂NO₂ was found to be less than 1.0 × 10^?13 cm³ s^?1 at 296 K by the discharge flow/resonance fluorescence technique. The reaction was also studied by the discharge flow/mass spectrometric technique. k_1a + k_1b was measured to be (3.4 ± 1.4) × 10^?14 cm³ s^?1 at 296 K. The reaction is too slow to be of any importance in stratospheric chemistry.     

Temperature dependence of the rate constant of ionic analogs of H + H2 → H2 + H reaction by quantum instanton method

Rate constant ratios k(T)/k(1,500K) for two symmetrical reactions H^? + H₂ → H₂ + H^? and H⁺ + H₂ → H₂ + H⁺ are reported. Direct method based on quantum instanton approximation for evaluation of the temperature dependence of the quantum‐mechanical reaction rate constant is used. Implementation of the theory involves thermodynamic integration and path integral Monte Carlo method. Results of anionic case shows resemblance to neutral case, whereas cationic case is significantly different and below 1,000K rate constant shows strong deviation form linearity of Arrhenius plot due to high activation barrier. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Thermal and state-selected rate constant calculations for O(3p) + H2 → OH + H and isotopic analogs

We present a new parametrization (based on ab initio calculations) of the bending potentials for the two lowest potential energy surfaces of the reaction O(³P) + H₂, and we use it for rate constant calculations by variational transition-state theory with multidimensional semiclassical tunneling corrections. We present results for the temperature range 250–2400 K for both the rate constants and the intermolecular kinetic isotope effects for the reactions of O(³P) with D₂ and HD. In general, the calculated rate constants for the thermal reactions are in excellent agreement with available experiments. We also calculate the enhancement effect for exciting H₂ to the first excited vibrational state. The calculations also provide information on which aspects of the potential energy surfaces are important for determining the predicted rate constants.     

High-temperature determination of the rate coefficient for the reaction H2 + CN → H + HCN

The rate coefficient of the reaction has been determined in the temperature range of 2700–3500 K using a shock tube technique. C₂N₂? H₂? Ar mixtures were heated behind incident shock waves and the early-time CN history was monitored using broad-band absorption spectroscopy. The rate coefficient providing the best fit to the data was in good agreement with extrapolations of previously published low-temperature results.     

The rate constant for H + i-C4H8 → t-C4H9 in the range of 298–563 K

The overall rate constant for hydrogen-atom addition to isobutene has been measured in the temperature range of 298–563 K in a flow discharge system coupled to a quadrupole mass spectrometer. Previously published results allow the determination of where the error limits are 95% confidence limits.      

A shock tube study of CO + OH → CO2 + H and HNCO + OH → products via simultaneous laser absorption measurements of OH and CO2

The rate coefficients for the reactions were determined using mixtures of HNO₃/CO/Ar and HNO₃/HNCO/Ar in incident shock wave experiments. Simultaneous OH and CO₂ absorption time-histories were obtained via cw uv narrow-linewidth absorption at 32606.56 cm⁻¹ (λ = 306.687 nm) and cw infrared narrow-linewidth absorption at 2380.72 cm⁻¹ (λ = 4.2004 μm), respectively. The measurements of k₁ determined from measured CO₂ time-histories are in good agreement with those determined from previous measurements of OH time-histories at this laboratory. The rate coefficient for the overall reaction of HNCO + OH → Products was determined from analysis of OH data traces. The uncertainty in k₂ was found to be +22% −16%. By incorporating data from a previous low-temperature study, the following empirical expression was determined for the bimolecular reaction: over the temperature range 620–1860 K. From analysis of CO₂ data traces, an upper limit on the branching fraction (α = k_2a/k₂) for reaction (2a) of 10% was found, independent of temperature over the range 1250–1860 K. © 1996 John Wiley & Sons, Inc.     

The rate constant of NO + O3 → NO2 + O2 in the temperature range of 283–443 K

The reaction NO + O₃ → NO₂ + O₂ has been studied in a 220-m³ spherical stainless steel reactor under stopped-flow conditions below 0.1 mtorr total pressure. Under the conditions used, the mixing time of the reactants was negligible compared with the chemical reaction time. The pseudo-first-order decay of the chemiluminescence owing to the reaction of ozone with a large excess of nitric oxide was measured with an infrared sensitive photomultiplier. One hundred twenty-nine decays at 18 different temperatures in the range of 283–443 K were evaluated. A weighted least-squares fit to the Arrhenius equation yielded k = (4.3 ± 0.6) × 10^?12 exp[-(1598 ± 50)/T] cm³/molecule sec (two standard deviations in brackets). The Arrhenius plot showed no curvature within experimental accuracy. Comparison with recent results of Birks and co-workers, however, suggests that a nonlinear fit, as proposed by these authors, is more appropriate over an extended temperature range.     

The rate constant for t-C4H9 → H + i-C4H8 and the thermodynamic parameters of t-C4H9

The rate of the reverse reaction of the system has been measured in the range of 584–604 K from a study of the azomethane sensitized pyrolysis of isobutane. Assuming the published value for the rate constant of recombination of t-butyl we obtain Combination with our published data for k₁ permits the evaluation We have modified a previously published structural model of t-butyl by the inclusion of a barrier to free rotation of the methyl groups in order to calculate values of the entropy and enthalpy of t-butyl as a function of temperature. Using standard data for H and for i-C₄H₈ we obtain We have obtained other, independent values of this quantity by a reworking of published data using our new calculations of the entropy and enthalpy of t-butyl. There is substantial agreement between the different values with one exception, namely, that derived from published data on the equilibrium which is significantly lower than the other values. We conclude that the value obtained from the present work and a reworking of published data which involves the use of experimental data on t-butyl recombination is incompatible with the result based on iodination data.     

Direct determination of the rate constant of the reaction NO + HO2 → NO2 + OH with the LMR

The rate of the reaction was determined in an isothermal discharge flow reactor with a combined ESR–LMR detection under pseudo-first-order conditions in HO₂. The rate constant was identical in experiments with two different HO₂ sources: F + H₂O₂ and H + O₂ + M. The absolute rate constant at T = 293 K was measured as In the range 2 ≤ p mbar ≤ 17 no pressure dependence for k₁ was found.     

Reaction rates for O + HD → OH + D and O + HD → OD + H

We have calculated reaction rates for the reactions O + HD → OH + D and O + DH → OD + H using improved canonical variational transition state theory and least-action ground-state transmission coefficients with an ab initio potential energy surface. The kinetic isotope effects are in good agreement with experiment. The optimized tunneling paths and properties of the variational transition states and the rate enhancement for vibrationally excited reactants are also presented and compared with those for the isotopically unsubstituted reaction O + H₂ → OH + H. The thermal reactions at low and room temperature are predicted to occur by tunneling at extended configurations, i.e., to initiate early on the reaction path and to avoid the saddle point regions. Tunneling also dominates the low and room temperature reactions for excited vibrational states, but in these cases the results are not as sensitive to the nature of the tunneling path. Overbarrier mechanisms dominate for both thermal and excited-vibrational state reactions for T > 600 K. For the excited-state reaction (with initial vibrational quantum number n > 0) a transition state switch occurs for T > 1000 K for the O + HD(n = 1) → OD + H case and for T > 1500 K for the O + DH(n = 1) → OD + H reaction, and this may be a general phenomenon for excited-state reactions at higher temperature. In the present case the switch occurs from an early variational transition state where the vibrationally adiabatic approximation is expected to be valid to a tighter variational transition state where nonadiabatic effects are probably important and should be included.     

The decomposition of dimethyl peroxide and the rate constant for CH3O + O2 → CH2O + HO2

The decomposition of dimethyl peroxide (DMP) was studied in the presence and absence of added NO₂ to determine rate constants k₁ and k₂ in the temperature range of 391–432°K: The results reconcile the studies by Takezaki and Takeuchi, Hanst and Calvert, and Batt and McCulloch, giving log k₁(sec^?1) = (15.7 ± 0.5) - (37.1 ± 0.9)/2.3 RT and k₂ ≈ 5 × 10⁴M^?1· sec^?1. The disproportionation/recombination ratio k_7b/k_7a = 0.30 ± 0.05 was also determined: When O₂ was added to DMP mixtures containing NO₂, relative rate constants k₁₂/k_7a were obtained over the temperature range of 396–442°K: A review of literature data produced k_7a = 10^9.8±0.5M^?1·sec^?1, giving log k₁₂(M^?1·sec^?1) = (8.5 ± 1.5) - (4.0 ± 2.8)/2.3 RT, where most of the uncertainty is due to the limited temperature range of the experiments.     

Temperature and third-body dependence of the rate constant for the reaction O + O2 + M → O3 + M

The flash photolysis resonance fluorescence technique was used to measure the rate constants of the reaction O + O₂ + M → O₃ + M (M = N₂, O₂, Ar, and He) as a function of temperature. The results for the rate constants are given by The activation energies with N₂, O₂, and Ar as third bodies are equal within the experimental error, (?1370 → 340 cal/mol), and the relative third-body efficiencies at 298 K for N₂, O₂, Ar, and He are 1.00, 0.99, 0.69, and 0.60, respectively.     

Topological studies on IRC paths of X+H2→XH+H reactions

Topological properties of potential energy and electronic density distribution on five reaction paths X+H₂→XH+H (X=H, N, HN, H₂C, NC) are investigated at the level of UMP2/6–311G(d,p). It has been found that in the region of the reaction paths studied, where B(r_c)|_s>0 [B(r_c)|_s is the product of ρ(r_c) and ∇²ρ(r_c) at the point of reaction process, i.e., B(r_c)|_s=ρ(r_c)∇² ρ(r_c)] is basically the same as the region of V′(s)<0[V′(s) is the second derivative of potential energy with respect to the reaction coordinate, i.e., V′(s)=d²V/ds²], and the point with maximum B(r_c)|_s is almost coincident with the point of minimum V′(s). It can be concluded from the calculated results that there is a good correlation between the topological properties of potential energy and electronic density distribution along the reaction path. The structure transition state of such collinear reactions may be determined by topological analysis of electronic density. © 1997 John Wiley & Sons, Inc. J Comput Chem 18: 1167–1174     

Measurements of the bimolecular rate constants for S + O2 → SO + O and CS2 + O2 → CS + SO2 at high temperatures

The bimolecular reactions in the title were measured behind shock waves by monitoring the O-atom production in COS? O₂? Ar and CS₂? O₂? Ar mixtures over the temperature range between 1400 and 2200 K. A value of the rate constant for S + O₂ → SO + O was evaluated to be (3.8 ± 0.7) × 10¹² cm³ mol^?1 s^?1 between 1900 and 2200 K. This was connected with the data at lower temperatures to give an expression k₂ = 10^10.85 T^0.52 cm³ mol^?1 s^?1 between 250 and 2200 K. An expression of the rate constant for CS₂ + O₂ → CS + SO₂ was obtained to be k₂₁ = 10^12.0 exp(?32 kcal mol^?1/RT) cm³ mol^?1 s^?1 with an error factor of 2 between 1500 and 2100 K.     

Ab initio MO and TST calculations for the rate constant of the HNO+NO2→HONO+NO reaction

Potential-energy surfaces for various channels of the HNO+NO₂ reaction have been studied at the G2M(RCC,MP2) level. The calculations show that direct hydrogen abstraction leading to the NO+cis-HONO products should be the most significant reaction mechanism. Based on TST calculations of the rate constant, this channel is predicted to have an activation energy of 6–7 kcal/mol and an A factor of ca. 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ at ambient temperature. Direct H-abstraction giving NO+trans-HONO has a high barrier on PES and the formation of trans-HONO would rather occur by the addition/1,3-H shift mechanism via the HN(O)NO₂ intermediate or by the secondary isomerization of cis-HONO. The formation of NO+HNO₂ can take place by direct hydrogen transfer with the barrier of ca. 3 kcal/mol higher than that for the NO+cis-HONO channel. The formation of HNO₂ by oxygen abstraction is predicted to be the least significant reaction channel. The rate constant calculated in the temperature range 300–5000 K for the lowest energy path producing NO+cis-HONO gave rise to © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 729–736, 1998     

A shock tube study of H + HNCO → NH2 + CO

The reaction of atomic hydrogen with isocyanic acid (HNCO) to produce the amidogen radical (NH₂) and carbon monoxide, has been studied in shock-heated mixtures of HNCO dilute in argon. Time-histories of the ground-state NH₂ radical were measured behind reflected shock waves using cw, narrowlinewidth laser absorption at 597 nm, and HNCO time-histories were measured using infrared emission from the fundamental v₂-band of HNCO near 5 μm. The second-order rate coefficient of reaction (2(a)) was determined to be: cm³ mol^?1 s^?1, where f and F define the lower and upper uncertainty limits, respectively. An upper limit on the rate coefficient of was determined to be:      

A measurement of the rate of the reaction N + H + M → NH + M

The combination reaction between N and H atoms has been studied in a flow system by mixing H atoms produced by thermal dissociation of H₂ with active nitrogen produced by a microwave discharge. Relative N atom concentrations were determined from the intensity of the yellow nitrogen afterglow. Absolute N and H atom concentrations were measured by EPR absorption spectroscopy. Absolute N atom concentrations were also determined by titration with NO. Upper and lower limits of 6.4 ± 1.5 × 10^?32 and 3.1 ± 1.0 × 10^?32 cm⁶ molecule^?2 sec^?1 were determined for the rate constant.