Ein neuer Reaktionsweg zu 1, 3-Dicarbonylderivaten. Modelluntersuchungen am A/B-Teil von 3-Oxo-5α-steroiden

A New Route to 1, 3-Dicarbonyl Derivatives, Model Investigations on the A/B-Part of-3-Oxo-5α-steroids Starting from 1 the 1, 3-dicarbonyl compounds 4a – d were synthetized via the enynes 2a – e and the relatively unstable epoxides 3a – d . The latter were reacted with 95% formic acid to gave 4a – d ; small amounts of the furane derivatives 5a – c were identified as by-products in this last step. In the presence of catalytic amounts of HgSO₄ the epoxides 3a – c yielded with 95% formic acid the furanes 5a – c , but no detectable amounts of 4a – c .     

高硅Y沸石的合成研究进展

Y沸石的合成及在流化催化裂化中的应用在现代石油化学工业中具有里程碑意义. Y沸石的骨架硅铝比直接影响材料的热/水热稳定性及催化性能. 提高Y沸石的骨架硅铝比、 合理减少酸中心密度、 提高酸强度, 进而改善催化裂化反应性能一直是学术界和工业界关注的重要课题. 目前工业使用的高硅Y沸石均是通过复杂的后处理方法获得的. 与复杂的后处理方法相比, 直接合成高硅Y沸石是更理想的方式, 但其难度大, 为分子筛领域具有挑战性的课题. 本文系统总结了高硅Y沸石的直接合成研究进展, 分别对无机合成体系和有机模板剂合成体系进行综合评述, 并介绍了Y沸石的晶化机理研究进展.     

ZSM-5/Y复合分子筛的酸性及其重油催化裂化性能

 ZSM-5/Y是本研究组合成的一种新型复合分子筛材料. 用“两次交换,两次焙烧”和磷 酸氢二铵浸渍方法对该复合分子筛材料进行了改性,采用红外光谱表征了复合分子筛的酸性,研究了磷改性对复合分子筛样品羟基区谱学性质的影响,并与相应的机械混合分子筛样品进 行了对比. 红外光谱数据表明,磷改性后复合分子筛的B酸(主要是中强酸)增加,而机械混合分子筛在各个酸强度区域的B酸量和L酸量都减少. 以新疆重油为原料考察了改性后复合分子 筛样品和机械混合分子筛样品的催化裂化性能. 与相应的机械混合分子筛催化剂相比,磷改 性复合分子筛催化剂具有较高的柴油选择性,其柴油产率增加了4.1个百分点,柴汽比增加了0.11,总轻油产率与机械混合分子筛相当. 用气体产物中的CMR(裂化机理比)和C3/C4比 值分析了复合分子筛的催化性能与其聚集体结构的关系.     

醋酸溶液中Pd-CuPc/Y催化甲烷选择氧化制甲醇

以氯化铜、钼酸铵、苯酐、氯化铵、尿素和NaY分子筛为原料,采用苯酐-尿素法制备了酞菁铜/分子筛复合物CuPc/Y.采用等体积浸渍法将金属钯担载在CuPc/Y上制备了Pd-CuPc/Y催化剂,并在醋酸水溶液中考察了其催化甲烷选择氧化合成甲醇反应的性能,结果表明,催化性能与反应温度、溶剂中CH₃COOH与H₂O的混合比例、对苯醌用量、反应时间等因素有关,在0.5%Pd-0.5%CuPc/Y添加量0.5 g、CH₃COOH与H₂O体积比4∶1、对苯醌用量1 000 μmol、反应时间3 h、反应温度150 ℃的条件下,甲醇的最佳生成量为1 840 μmol.Pd-CuPc/Y催化剂可以多次循环使用,但由于催化剂流失和催化剂表面的钯粒子聚集的原因,循环使用后的催化剂催化活性有所下降.Pd-CuPc/Y在醋酸溶液中催化甲烷选择氧化合成甲醇是亲电取代反应和活性氧物种氧化共同作用的结果.     

Silica-Supported Phosphine Palladium(0) Complex Catalyzed Phenylation of Acid Chlorides and Aryl Iodides by Sodium Tetraphenylborate

In the presence of a catalytic amount of silica – supported phosphine palladium(0) complex, sodium tetraphenylborate (NaBPh₄) reacts with acid chlorides under mild conditions to give the corresponding phenyl ketones in 57 – 80% yields; it also reacts with aryl iodides to afford the corresponding biaryls in 75 – 84% yields.     

Inclusion controlled lanthanide-imidazolium functionalised carboxylate complexation

Imidazolium functionalized carboxylic acid forms a multi-component material with p-sulfonatocalix[4]arene and aquated lanthanide ions, stabilising dinuclear metal complexes for Y(3+) and Gd(3+). These have the simplest binding of two bridging carboxylates between the two metal centres (Y(3+)), or the same arrangement along with the simplest binding of one carboxylate bridging two metal ions for the larger metal ion (Gd(3+)).     

Unexpected hydrobromic acid-catalyzed C-C bond-forming reactions and facile synthesis of coumarins and benzofurans based on ketene dithioacetals

Hydrobromic acid was found to be a unique catalyst in C? C bond‐forming reactions with ketene dithioacetals. Distinctly different from other acids (including Lewis and Brønsted acids), the remarkable catalytic performance of hydrobromic acid in catalytic amounts was observed in the “acid”‐catalyzed reactions of readily available functionalized ketene dithioacetals 1 with various electrophiles. Under the catalysis of 0.1 equivalents of hydrobromic acid, the reaction of 1 with carbonyl compounds 2 a – l gave polyfunctionalized penta‐1,4‐dienes 3 or conjugated dienes 4 in good to excellent yields. The reaction tolerated a broad range of substituents on both the ketene dithioacetals 1 and the carbonyl compounds 2 . Application of this efficient C? C bond‐forming method generated coumarins 5 and benzofurans 7 under mild, metal‐free conditions by hydrobromic acid‐catalyzed reactions of 1 with salicylaldehydes 2 m – o and p‐quinones 6 a – d , respectively. A new reactive species, a sulfur‐stabilized carbonium ylide, formed depending on the nature of the counterion, and this was proposed as the key intermediate in the unique catalysis of hydrobromic acid.     

高中油型加氢裂化催化剂用Y型沸石的改性研究

采用络合-水热-酸联合处理的方法对Y沸石进行了改性,改性后的沸石用于制备高中油型加氢裂化催化剂,并考察了沸石改性对高中油型加氢裂化催化剂反应效果的影响。氮吸附、XRD、TEM和吡啶吸附 脱附红外光谱法等表征结果表明,酸处理可以有效脱除分子筛中的非骨架铝,增加改性Y沸石的比表面积和二次孔的孔容,并起到优化酸中心的目的。反应评价结果表明,Y沸石经酸处理改性后,由于比表面积、二次孔孔容的增加和酸性的优化,所制得的催化剂可明显提高高中油型加氢裂化加氢裂化的中油收率。     

Fluorohalogeno compounds. II. Sonochemical approach to 3,3,3-trifluoropropionic acids

Fluoropropionic acids of the general formula CF₃CXYCO₂H ( X = F, Cl, Br ; Y = F, Cl, Br, H ) were obtained by the sonochemically promoted reaction of fluorohalogenoethanes CF₃CXYZ ( Z = Cl, Br ) with zinc and carbon dioxide. Penta- and tetrafluoroethanes ( X = Y = F and X = F, respectively ) gave good yields ( 35 – 47 % ) of the acids; with trifluoro derivatives the yields were substantially lower. Hydrogenolysis of the CCl and CBr bonds in CF₃CFClCO₂H and CF₃CFBrCO₂H afforded 2,3,3,3-tetrafluoropropionic acid.     

An appropriate one-pot synthesis of dihydropyrimidinones catalyzed by heteropoly acid supported on zeolite: An efficient and reusable catalyst for the Biginelli reaction

A mild and efficient catalytic method has been developed for the synthesis of 3,4-dihydropyrimidin-2 (1H)-ones (DHPM) by a one-pot three-component cyclocondensation reaction using molybdophosphoric acid (MPA) supported on Y zeolite in high to excellent yields. The reaction investigated in the presence of molybdophosphoric acid encapsulated in the supercage of zeolite for comparison. In the second method, no appreciable progress was observed due to large size of dihydropyrimidinone compounds towards the supercage dimension of Y zeolite. In addition, the catalyst was recovered and reused for several times without efficient loss in catalytic activity.     

Synthesis and Conformational Analysis of Macrocyclic Dilactones Mimicking the Pharmacophore of Aplysiatoxin

A small number of macrocyclic dilactones of type 3 , i.e., 9, 10, 11 , and epi‐ 11 , comprising a 3,4‐dihydroxypentanoic acid unit, the pharmacophore of aplysiatoxin, and a conformationally preorganized ω‐hydroxynonanoic acid unit were synthesized. Conformational analysis – based on ²J and ³J NMR coupling constants – of the dihydroxypentanoyl part of these macro‐dilactones indicates the extent to which a conformation induction across the macro‐dilactone ring occurs from the stereogenic centres implemented in the ω‐hydroxynonanoic acid part.     

Purines. Part XVI

A series of N‐substituted 8‐aminoxanthines (=8‐amino‐3,7(or 3,9)‐dihydro‐1H‐purine‐2,6‐diones) 8 – 16 and 34 – 37 were synthesized from the corresponding 8‐nitroxanthines 1 – 7, 30 – 33 , and 8‐(phenylazo)xanthines 17 and 18 by catalytic reduction. Another approach was derived from 6‐amino‐5‐(cyanoamino)uracils (=N‐(6‐amino‐1,2,3,4‐tetrahydro‐2,4‐dioxopyrimidin‐5‐yl)cyanamides) 23, 24 , and 27 by base‐catalyzed cyclization yielding 25 – 28 . All 8‐aminoxanthines 8 – 29 and 34 – 37 were acetylated to the corresponding 8‐(acetylamino)xanthines 40 – 57 , and prolonged heating led to 8‐(diacetylamino)xanthines 58 and 59 . Several 8‐aminoxanthines 8 – 13 were diazotized forming 8‐diazoxanthines 60 – 64 . Coupling reactions of isolated 62 and 64 and intermediary formed 8‐diazoxanthines with 1,3‐dimethylbarbituric acid (=1,3‐dimethylpyrimidine‐2,4,6(1H,3H,5H)‐trione; 66 ) resulted in 5‐[(xanthin‐8‐yl)diazenyl]‐1,3‐dimethylbarbituric acids=3,7(or 3,9)‐dihydro‐8‐[2‐(1,2,3,4‐tetrahydro‐1,3‐dimethyl‐2,4‐dioxopyrimidin‐5‐yl)diazenyl]‐1H‐purine‐2,6‐diones) 67 – 80 . The newly synthesized xanthine derivatives were characterized by the determination of their pK_a values, the UV‐ and NMR spectra, as well as elemental analyses.     

Improvement in nanocomposite host (nanocavity of dealuminated zeolite Y)-guest (12-molybdophosphoric acid) catalytic activity and its application to the one-pot three-component synthesis of tetrahydrobenzo[b]pyrans

Zeolite Y was dealuminated by chemical methods (with ethylenediaminetetraacetic acid) to modify the zeolite structure for 12-molybdophosphoric acid (MPA) loading. MPA was encapsulated in the nanocavities of modified dealuminated zeolite Y (MDAZY) and characterized by Fourier transform infrared, X-ray diffraction, and atomic absorption spectroscopy. The new catalyst was applied for an efficient chemoselective synthesis of tetrahydrobenzo[b]pyran derivatives, and the corresponding products were obtained in good to excellent yields in very short reaction times. Furthermore, the catalytic activity of this new catalyst in the synthesis of tetrahydrobenzo[b]pyrans was compared with MPA encapsulated in zeolite Y dealuminated by the hydrothermal method. The catalyst (MPA–MDAZY) was recovered and reused several times without loss of its catalytic activity.     

Dioxygen Affinities and Catalytic Oxidation Performance of Cobalt (II)Complexes with N-Aryl Hydroxamic Acid

It is well known that the study on biomimetic oxygen carriers not only has important theoretic significance to discover the mechanism of reversible bonding, activating oxygen as well as the oxidation reaction in organism, but also has potential application in separating oxygen from air and realizing the high efficiency and selectivity of catalytic oxidation reaction under a mild condition1. Metal- porphyrin and metal- phthalol- gaunine have been extensively used as biomimetic oxygen carriers u…     

Dioxygen Affinities and Catalytic Oxidation Performance of Cobalt （Ⅱ）Complexes with N—Aryl Hydroxamic Acid

The oxygenation of cobalt(Ⅱ) hydroxamates(CoL2) and its catalytic performance in oxidation of p-xylene to p-toluic acid (PTA) were examined.The effects of X and Y bonded to hydroxamate group on dioxygen affinities and catalytic oxidation performance were also investigated.     

含NiY分子筛的加氢裂化催化剂载体研究

采用水热晶化法,合成出了含骨架杂原子Ni的NiY分子筛。分别以Y分子筛和NiY分子筛作为载体,通过等体积浸渍法担载金属活性组分Ni、Mo,制备加氢裂化催化剂。通过NH₃-TPD表征催化剂的表面酸性、固定床反应器评价催化剂的加氢裂化性能。结果表明,将Ni引入分子筛骨架中,可以调变催化剂的表面酸性,提高其裂化和脱硫活性,并减少催化剂上的积炭。     

Dioxygen Affinities and Catalytic Oxidation Performance of Co (II) Complexes with Phenol Ether Bridged Dihydroxamic Acids

Synthetic oxygen carriers are of great interest as models to mimic oxygen-carrying metalloenzymes for oxygen storage and transport1,2. Moreover, they possess great significance to realize high efficiency and selectivity catalytic oxidation of organic subs…     

Synthesis of amino sugars via isoxazolines the concept and one application: nitrile oxide/furan adducts

Aliphatic nitrile oxides cycloadd to furans to afford amino sugar precursors 1. Oxidation by m-chloroperbenzoic acid and/or LiA1H₄ reduction give rise stereoselectively to derivatives of the xylo and ido series, 2 – 4, with 3 to 5 adjacent chiral centres.     

Bifunctional Gyroidal MOFs: Highly Efficient Lewis Base and Lewis Acid Catalysts

A family of gyroidal metal–organic frameworks (STUs) composited with transition metal ions and bi‐imidazolate ligands (BIm) were prepared and applied as both Lewis base and acid catalysts. Benefiting from the intrinsic basicity of the ligands and the Lewis acidic sites of the open metal centres, the STUs materials show excellent catalytic activities as Lewis base for the Knoevenagel condensation reaction between various aldehydes and malononitrile, and as Lewis acid for cyanosilylation reactions. Among these STUs, STU‐4 (Ni(BIm)) shows the best catalytic efficiency (conversions >99 %) in both Knoevenagel condensation and cyanosilylation reactions under mild conditions, providing thus an advanced material for both Lewis base and Lewis acid catalysis.     

Synthesis of 1,3-Dioxan-2-ones by Photo-Aerobic Selenium-π-Acid Multicatalysis

An expedient method for the synthesis of cyclic carbonates from homoallylic carbonic acid esters by means of photo-aerobic selenium-π-acid multicatalysis is reported. Until now, conceptually related methods commonly relied either on the stoichiometric addition of electrophiles onto the substrate's alkene moiety or the presence of pre-installed leaving groups in allylic position of said alkene to – in part, catalytically – initiate an intramolecular attack by an adjacent carbonic acid ester group. In sharp contrast, the current study shows that the C−C double bond of homoallylic carbonic acid esters can be directly activated by the catalytic interplay of a pyrylium dye and a diselane using ambient air as the sole oxidant and visible light as an energy source.