Elektromotorisches Verhalten von Flüssigmembranelektroden-Messketten mit enantiomerenselektiven chiralen Ionophoren

Electromotive Behaviour of Liquid-membrane Electrode Assemblies Based on Enantiomer-selective Chiral Ionophores A comprehensive theoretical treatment is given for the potentiometric behavior of enantiomer-selective membrane electrodes based on chiral ionophores and plasticizers. The membrane model allows for free and complexed enantiomeric or racemic ions (e.g. ephedronium and l-phenylethylammonium ions) as well as for achiral interfering ions. Experiments are derived for the determination of the stoichiometry and the relative stability of enantiomeric ion/enantiomeric ligand complexes, and for the analytical measurement of the enantiomeric excess of ions in solution.     

Enantiomer-Differentiation Induced by an Enantiomeric Excess during Chromatography with Achiral Phases

It is shown, in the case of the diketone 2 , that chromatography with achiral phases of a non-racemic mixture of enantiomers can furnish fractions which differ in enantiomeric excess. Such chromatography may, therefore, be used to further enrich a sample in one enantiomer. By the same token, chromatography is not a generally safe method for the purification of the product of an enantio-differentiating process, if the enantiomeric excess of a purified portion of that product is taken to be a measure of the efficiency of the process. The described effect represents an enantiomer differentiation induced solely by an alredy existing enantiomeric excess during chromatography. It thus belongs to a class of effects where the relative amounts of two enantiomers induce an observable difference between them. Such effects are called EE effects. The common principle underlying EE effects is explained by a simple symmetry argument. Since EE effects can also occur during reactions with achiral reagents, further transformations of an enantiomer-enriched product may furnish false information on its enantiomeric excess.     

Messkette zur direkten potentiometrischen Bestimmung des Enantiomerenüberschusses von 1-Phenyläthylmmonium-Ionen

Cell Assembly for the Potentiometric Determinatin of the Enantiomeric Excess of 1-Phenylethylammonium-Ions A cell assembly with two membranes containing each one enantiomer of the ionophor N,N,N′,N′,N″,N″,N?,N?-octabutyl-1,4,7,10,16-hexaoxacyclooctadecane-2,3,11,12-tetracarboxamide is used for the direct potentiomewtirc determination of the enantiomeric excess ee of 1-phenylethylammonium ions in aqueous solutions. The preference for the (R)-over the (S)-1-phenylethylammonium ion by the (2R,3R,11R,12R)-ionophor of 2.7 allows a reliable determination of ee even in the presence of known concentrations of the heavy interferent KCl.     

Systematic Studies using 2‐(1‐Adamantylethynyl)pyrimidine‐5‐carbaldehyde as a Starting Material in Soai’s Asymmetric Autocatalysis

Herein, we present a new substrate for the Soai reaction, which has an adamantylethynyl residue ( 1 g ) and exhibits asymmetric autocatalysis, yielding products with enantiomeric excesses above 99 %. For the first time, all reactions were performed on a parallel synthesizer system to ensure identical reaction conditions. A detailed systematic study of reaction parameters was performed and we report the highest enhancements of enantiomeric excess reported so far in the Soai reaction in one reaction cycle (7.2→94.1 % ee or 3.1→92.1 % ee). Our results led to a set of reaction parameters that yield reproducible results. Therefore, our new starting material 1 g is suitable for systematic and mechanistic studies on this remarkable reaction. A series of experiments designed to quantify the amplification of enantiomeric excess demonstrated that the reaction can be used in principle as a tool for the detection of low enantiomeric excesses: under definite conditions, an unknown low enantiomeric excess (0.1–7 %) was amplified to a detectable one. A back calculation to the original value offers a new method for the determination of small enantiomeric excesses.     

Chiral enrichment of serine via formation,dissociation, and soft-landing of octameric cluster ions

Chiral enrichment of serine is achieved in experiments that involve formation of serine octamers starting from non-racemic serine solutions. Serine octamers were generated by means of electrospray and sonic spray ionization of aqueous solutions of d(3)-L-serine (108 Da) and D-serine (105 Da) having different molar ratios of enantiomers. A cyclic process involving the formation of chirally-enriched octameric cluster ions and their dissociation, viz. Ser(1) --> Ser(8) --> Ser(1), allows serine monomers to be regenerated with increased enantiomeric excess as shown in two types of experiments: (1) Chiral enrichment in serine was observed in MS/MS/MS experiments in a quadrupole ion trap in which the entire distribution of serine octamers formed from non-racemic solutions was isolated, collisionally activated, and fragmented. Monomeric serine was regenerated with increased enantiomeric excess upon dissociation of octamers when compared with the enantiomeric composition of the original solution. (2) Chiral enrichment was observed in the products of soft-landing of mass-selected protonated serine octamers. These ions were generated by means of electrospray or sonic spray ionization, mass selected, and collected on a gold surface using ion soft-landing. Chiral enrichment of the soft-landed serine was established by redissolving the recovered material and comparing the intensities of protonated molecular ions of d(3)-L-serine and D-serine after APCI-MS analysis. Both of these experiments showed comparable results, suggesting that formation of serine octamers depends only on the enantiomeric composition of the serine solution and that the magnitude of the chiral preference is intrinsic to octamers formed from solutions of given chiral composition.     

A few molecules can control the enantiomeric outcome. Evidence supporting absolute asymmetric synthesis using the Soai asymmetric autocatalysis

[reaction: see text] Experiments were carried out to investigate whether the Soai asymmetric autocatalysis can accomplish true absolute asymmetric synthesis. In 54 reactions, R and S enantiomeric products were obtained 27 times each. Of 25 pairs of side-by-side identical reactions, 12 afforded opposite enantiomers. In a test of the mechanistic viability of a random-chance process, it was found that a very few molecules (approximately 60 000) were sufficient to control the enantiomeric outcome of these reactions. These observations appear most consistent with asymmetric synthesis originating from the chance enantiomeric excess in a racemate.     

Multimetallic Architectures from the Self‐assembly of Amino Acids and Tris(2‐pyridylmethyl)amine Zinc(II) Complexes: Circular Dichroism Enhancement by Chromophores Organization

Stereodynamic optical probes are becoming very popular for their capability to act as molecular sensors for the determination of the enantiomeric excess (ee) of chiral compounds. Herein, we describe a new molecular architecture formed by the self‐assembly of three zinc metal ions, two modified tris(2‐pyridylmethyl)amine ligands, and two amino acids. This system is the structural and functional serendipitous evolution of our previous probe for the determination of amino acids ee. In the new system, one of the metals templates in close proximity two chromophores enhancing their exciton coupling.     

Engineering Homochiral Metal–Organic Frameworks by Spatially Separating 1D Chiral Metal–Peptide Ladders: Tuning the Pore Size for Enantioselective Adsorption

The reaction of the chiral dipeptide glycyl‐L(S)‐glutamate with Co^II ions produces chiral ladders that can be used as rigid 1D building units. Spatial separation of these building units with linkers of different lengths allows the engineering of homochiral porous MOFs with enhanced pore sizes, pore volumes, and surface areas. This strategy enables the synthesis of a family of isoreticular MOFs, in which the pore size dictates the enantioselective adsorption of chiral molecules (in terms of their size and enantiomeric excess).     

Determination of absolute configurations of amino acids by asymmetric autocatalysis of 2-alkynylpyrimidyl alkanol as a chiral sensor

Asymmetric autocatalysis of 2-alkynyl-5-pyrimidyl alkanol is employed as a chiral sensor of 20 amino acids. Asymmetric autocatalysis using amino acids as chiral initiators gave pyrimidyl alkanols of the absolute configurations that were correlated with those of the amino acids. The enantiomeric excesses of pyrimidyl alkanol are invariably high even when the enantiomeric excess of amino acids is as low as 0.1%. Thus, by determining the absolute configuration of pyrimidyl alkanol with high enantiomeric excess, one can determine the absolute configuration of amino acids even when their enantiomeric excess is low.     

Organocatalytic Asymmetric Friedel–Crafts Reaction of Sesamol with Isatins: Access to Biologically Relevant 3‐Aryl‐3‐hydroxy‐2‐oxindoles

The Friedel–Crafts reaction of electron‐rich phenols with isatins was developed by employing bifunctional thiourea–tertiary amine organocatalysts. Cinchona alkaloid derived thiourea epiCDT‐ 3 a efficiently catalyzed the Friedel–Crafts‐type addition of phenols to isatin derivatives to provide 3‐aryl‐3‐hydroxy‐2‐oxindoles 7 and 9 in good yield (80–95 %) with good enantiomeric excess (83–94 %). Friedel–Crafts adduct 7 t was subjected to a copper(I)‐catalyzed azide–alkyne cycloaddition to obtain biologically important 3‐aryl‐3‐hydroxy‐2‐oxindole 11 in good enantiomeric excess and having a 1,2,3‐triazole moiety.     

Highly enantiomerically enriched alpha-haloalkyl Grignard reagents

alpha-Chloro- and alpha-bromoalkyl Grignard reagents 11 and 30 with > 97% ee (enantiomeric excess) were generated by a sulfoxide/magnesium exchange reaction from the enantiomerically and diastereomerically pure sulfoxides 25 and 27. The resulting alpha-haloalkyl Grignard reagents are configurationally stable at -78 degrees C. Racemization sets in at or above -60 degrees C, especially when the solution contains bromide ions. In the absence of halide ions, the configurational stability extends up to -20 degrees C, when chemical decomposition commences.     

Toward Fluorescence‐Based High‐Throughput Screening for Enantiomeric Excess in Amines and Amino Acid Derivatives

A highly accurate and reliable screening method for enantiomeric excess of amine derivatives in the presence of water is reported. The fluorescence‐based screening system has been realized by self‐assembly of chiral diol‐type dyes (BINOL, VANOL and VAPOL), 2‐formylphenylboronic acid, and chiral amines forming iminoboronate esters. The structure and chirality of the amine analytes determine the stability of the diastereomeric iminoboronate esters, which in turn display differential fluorescence. The fluorescence signal reflects the enantiomeric purity of the chiral amines and was utilized in high‐throughput arrays. The arrays were able to recognize enantiomeric excess of amines, amino esters, and amino alcohols. In addition to qualitative analysis, quantitative experiments were successfully performed. Studies of the role of additives such as water or citrate were carried out to gain insight into the stability of the iminoboronate esters. It is shown that the above additives destabilize less stable esters while the stable esters remain unchanged. Thus, the presence of water and citrate leads to increased difference between the diastereomeric iminoboronates and contributes to the enantiodiscrimination of the chiral amines.     

Quantitative chiral analysis of phthaloylglutamic acid and related analogs by a single ratio kinetic method using electrospray ionization and matrix-assisted laser desorption techniques

A rapid method for quantitative chiral analysis of phthaloylglutamic acid and its dimethyl ester by Cook's kinetic method is demonstrated using electrospray ionization (ESI) and matrix-assisted laser desorption techniques. Transition-metal-bound complex ions containing the chiral phthaloylglutamic acid and its dimethyl ester are generated by ESI mass spectrometry and subjected to collision-induced dissociation. The ratio of the two competitive dissociation rates is related to the enantiomeric composition of the drug mixture. A seven-point calibration curve, derived from the kinetic method, allowed rapid quantitation of the enantiomeric excess of drug mixtures. In this paper, matrix-assisted laser desorption/ionization (MALDI) coupled with the linear ion trap (LIT) technique is evaluated for its applicability as a complementary technique to ESI for chiral discrimination and quantitation.     

Synthesis and polymerization of racemic and optically active β-substituted β-propiolactones. II: β-monosubstituted and β-disubstituted monomers and polymers with different optical purities

β-(trichloromethyl)-β-propiolactone (CCl₃-PL), β-(trifluoromethyl,methyl)-β-propiolactone (CF₃, Me-PL) and β-(trifluoromethyl,ethyl)-β-propiolactone (CF₃,Et-PL) have been obtained by the reaction of ketene with chloral, 1,1,1-trifluoroacetone and 1,1,1-trifluorobutanone, respectively. Chiral catalysis lead to optically active monomers. The enantiomeric excess of the lactones has been measured by ¹H-NMR spectroscopy, in the presence of 2,2,2-trifluoro-1-(9-anthryl)ethanol or an europium chiral shift reagent. Polymerizations have been carried out in bulk or in toluene, at 60°C or 80°C, using mainly organometallic initiators. The Polymers become insoluble and crystalline at enantiomeric excesses over 80% for CCl₃-PL and 70% for CF₃,Me-PL. Melting temperatures were recorded from 238 to 268°C for poly(CCl₃-PL) and from 78 to 100°C for poly(CF₃,Me-PL), depending upon the molecular weight and the enantiomeric excess. The ¹³C-NMR specroscopy of poly(CCL₃-PL) indicates that the polymerization of the corresponding lactone leads to polymers of increasing degrees of isotacticity with the enantiomeric excess of the monomer.     

Palladium(II)/Brønsted Acid‐Catalyzed Enantioselective Oxidative Carbocyclization–Borylation of Enallenes

An enantioselective oxidative carbocyclization–borylation of enallenes that is catalyzed by palladium(II) and a Brønsted acid was developed. Biphenol‐type chiral phosphoric acids were superior co‐catalysts for inducing the enantioselective cyclization. A number of chiral borylated carbocycles were synthesized in high enantiomeric excess.     

Über peroxo-mischkomplexe von titan, niob und tantal—III Die chelometrische titration von fünfwertigem niob

A chelatometric method for the titration of Nb^v, using nitrilotriacetic acid is described. This forms a 1:1 complex with the peroxy-Nb^v ion. NTA is added in excess, and the excess is backtitrated with Cu solution at pH 5·0–5·5 using the metallofluorescent indicator, Methylcalcein, under UV illumination. The reproducibility, for amounts of 4·56–23·68 mg of Nb is 0·07 mg of Nb. N-Hydroxyethylethylenediamine-N,N',N'-triacetic acid forms a similar 1:1 complex, and can be used instead of NTA, but with little advantage.

Résumé

On décrit une méthode de dosage du Nb (V) par formation de chélates. L'acide nitrilotriacétique, qui forme un complexe 1/1 avec les ions peroxoniobium (V) est utilisé comme agent chélatant. On ajoute du NTA en excès er l'on dose en retour par une solution de cuivre en utilisant comme indicateur de fluorescence la méthylcalcéine sous irradiation ultra-violette. Les analyses d'essais portant sur des échantillons variant de 4,56 mg à 23,68 mg de niobium fournissent une reproductibilité de ± 0,07 mg. L'acide N-hydroxyéthyléthylénediamine-N,N'.N'-triacétique forme également un complexe 1/1 avec les ions peroxoniobium (V) et peut être utilisé à la place du NTA mais ne présente pas d'avantages particuliers.     

Highly Enantioselective Microbial Hydrolysis of cis‐2‐Arylcyclopropanecarbonitriles

Hydrolysis of racemic cis‐2‐arylcyclopropanecarbonitriles catalyzed by Rhodococcus sp. AJ270 whole cells proceeded enantioselectively to afford the corresponding amide and acid with enantiomeric excess higher than 99%.     

Amplification of enantiomeric excess, mirror-image symmetry breaking and kinetic proofreading in Soai reaction models with different oligomeric orders

A comprehensive kinetic analysis of three prototypical autocatalytic cycle models based on the absolute asymmetric Soai reaction is presented. The three models, which can give rise to amplification of enantiomeric excess and mirror-image symmetry breaking, vary by their monomeric, dimeric or trimeric order of the assumed catalytic species. Our numerical approach considered the entire chiral combinatorics of the diastereomeric interactions in the models as well as the multiplicity of coupled reversible reactions without applying fast equilibration or quasi-steady state approximations. For the simplest monomeric model, an extensive range of parameters was explored employing a random grid parameter scanning method that revealed the influence of the parameter values on the product distribution, the reaction-time, the attenuation or amplification of enantiomeric excess as well as on the presence or absence of mirror-image symmetry breaking. A symmetry breaking test was imposed on the three models showing that an increase in the catalytic oligomer size from one to three leads to a higher tolerance to poorer chiral recognition between the diastereoisomers and identifies the greater impact of the diastereoisomeric energy difference over an imperfect stereoselectivity in the catalytic step. This robustness is understood as a particular case of so-called kinetic proofreading in asymmetric autocatalysis.     

In Situ Mass Spectrometric and Kinetic Investigations of Soai's Asymmetric Autocatalysis

Chemical reactions that lead to a spontaneous symmetry breaking or amplification of the enantiomeric excess are of fundamental interest in explaining the formation of a homochiral world. An outstanding example is Soai's asymmetric autocatalysis, in which small enantiomeric excesses of the added product alcohol are amplified in the reaction of diisopropylzinc and pyrimidine-5-carbaldehydes. The exact mechanism is still in dispute due to complex reaction equilibria and elusive intermediates. In situ high-resolution mass spectrometric measurements, detailed kinetic analyses and doping with in situ reacting reaction mixtures show the transient formation of hemiacetal complexes, which can establish an autocatalytic cycle. We propose a mechanism that explains the autocatalytic amplification involving these hemiacetal complexes. Comprehensive kinetic experiments and modelling of the hemiacetal formation and the Soai reaction allow the precise prediction of the reaction progress, the enantiomeric excess as well as the enantiomeric excess dependent time shift in the induction period. Experimental structural data give insights into the privileged properties of the pyrimidyl units and the formation of diastereomeric structures leading to an efficient amplification of even minimal enantiomeric excesses, respectively.     

Colour indicator for enantiomeric excess and assignment of the configuration of the major enantiomer of an amino acid ester

A colour indicator for the full range of enantiomeric excess (-100%-->100% ee) is presented which is based on visual colour inspection of a liquid crystal doped with the analyte, i.e. the methyl ester of amino acid phenylglycine, providing the enantiomeric excess and allowing the assignment of the major enantiomer.