Entanglement networks of 1,2-polybutadiene crosslinked in states of strain. VII. Stress-birefringence relations

Crosslinks are introduced by γ irradiation into 1,2-polybutadiene while strained in uniaxial extension near T_g with stretch ratio λ₀, thereby trapping a proportion of the entanglements originally present. The stress at any subsequent strain λ is accurately given by the sum σ_N + σ_x, where σ_N is the stress contributed by a trapped entanglement network with λ = 1 as reference and a Mooney–Rivlin stress-strain relation, and σ_x is that contributed by a crosslink network with λ = λ₀ as reference and neo-Hookean stress-strain relation. The birefringence is accurately given as δn = ?_Nσ_N + ?_xσ_x, where the ?'s are the respective stress-optical coefficients. From measurements at λ = λ₀ where σ_x = 0, ?_N can be determined separately. For polymer with 88% 1,2 microstructure, ?_N and ?_x are nearly equal and independent of irradiation dose, though strongly dependent on temperature. For polymer with (95–96)% 1,2, ?_N and ?_x are different (even opposite in sign) and dependent on dose. This behavior is associated with a side reaction of cyclization by the γ irradiation, which is inhibited by the 1,4 moiety in the polymer with lesser 1,2 content. It is responsible for residual birefringence in the state of ease (λ = λ_s) where σ_N = –σ_x and the stress is zero.     

Synthesis and x-ray crystal structure of the TiMgCl5(OOCCH2Cl) · (ClCH2COOC2H5)3 Adduct

The synthesis of the TiMgCl₅(OOCCH₂Cl) · (ClCH₂COOC₂H₅)₃ adduct, obtained by reacting TiCl₄ with a solution of MgCl₂ in dry ClCH₂COOC₂H₅, is reported together with its molecular and crystal structure as determined by x-ray diffraction. The structure was solved by direct and Fourier methods and refined by least-squares techniques to R = 0.057 for 1318 independent observed reflections. Crystals are monoclinic, space-group P2₁/c, with 4 formula units in a unit-cell of dimensions a = 10.480(4), b = 19.641(9), c = 16.597(6) Å, β = 120.21(5)°. The titanium(IV) atom is octahedrally coordinated by five chlorine atoms and an oxygen atom of a OOCCH₂Cl residue. The magnesium atom is similarly coordinated by two chlorine atoms, the carbonyl oxygen atoms of three ClCH₂COOC₂H₅ molecules and an oxygen atom of the OOCCH₂Cl residue. The two octahedra share an edge by a double chlorine bridge between the magnesium and the titanium atoms and are also connected by the COO group of the OOCCH₂Cl residue. Changes in the configurations and dimensions with respect to the free acceptor and donor molecules are discussed.     

Ti7Cl16 und Ti7Br16 sowie weitere Untersuchungen mit Titanhalogeniden. Al2X6 als Komplexbildner

Ti₇Cl₁₆ and Ti₇Br₁₆ and Further Investigations with Titanium Halides. Al₂X₆ as a Complex Forming Agent TiCl_3,s can be transported with Al₂Cl₆ via TiAlCl_6,g in a temperature gradient. The equilibrium of this reaction was studied by mass spectroscopy. There is no indication of the existence of a TiAl₂Cl₉ molecule as assumed in the literature. β-TiBr₃ was prepared from the elements in the presence of the transporting agent Al₂Br_6,g. The transport of TiCl₂ with Al₂Cl_6,g involves, as an important step, the disproportionation which is favoured by the reaction of Ti with the glass wall. If the disproportionation is made impossible by addition of Ti the novel compound Ti₇Cl₁₆ is obtained. Independent of Ti₇Cl₁₆, a phase TiCl_{(2 + x)} with a broad range of homogeneity exists. The compound Ti₇Br₁₆, being isostructural with Ti₇Cl₁₆, was also prepared. Results of magnetic measurements and observations on the thermal decomposition of the compounds are reported.     

Bismuth triple-decker phthalocyanine: synthesis and structure

Triclinic crystals of bismuth(III) triple-decker phthalocyanine, Bi₂Pc₃, Pc=C₃₂H₁₆N₈²⁻, were grown directly by the reaction of Bi₂Se₃ with 1,2-dicyanobenzene at 220°C. The Bi₂Pc₃ molecule is centrosymmetric with the bismuth atoms located closer to the peripheral phthalocyaninato(2−) rings than to the central ring. Each bismuth(III) ion is connected by four N-isoindole atoms to the peripheral and by four N-isoindole to the central Pc ring with average distances of 2.333 and 2.747 Å, respectively. This indicates a stronger connection of Bi(III) to the peripheral saucer-shaped macrocyclic rings than to the central rings. The neighbouring phthalocyaninato(2−) moieties in the Bi₂Pc₃ molecule are separated by a distance of 3.101(5) Å. The central Pc ring is rotated by 36.4° with respect to the peripheral ones. Differences in Bi–N bond lengths are a result of interaction of the bismuth ion with peripheral and central rings as well as the repulsion forces between two bismuth ions in the same Bi₂Pc₃ molecule, which are separated by a distance of 3.839(2) Å. The crystal packing is characterized by a distance of 3.56 Å between Pc rings of neighbouring Bi₂Pc₃ molecules.     

A Three‐Step Method for the Deposition of Large Cuboids of Organic–Inorganic Perovskite and Application in Solar Cells

A three‐step method for the deposition of CH₃NH₃PbI₃ perovskite films with a high crystalline structure and large cuboid overlayer morphology is reported. The method includes PbI₂ deposition, which is followed by dipping into a solution of C₄H₉NH₃I (BAI) and (BA)₂PbI₄ perovskite formation. In the final step, the poorly thermodynamically stable (BA)₂PbI₄ phase converts into the more stable CH₃NH₃PbI₃ perovskite by dipping into a solution of CH₃NH₃I. The final product is characterized by XRD, SEM, UV/Vis, and photoluminescence analysis methods. The experimental results indicate that the prepared perovskite has cuboids with high crystallinity and large sizes (up to 1 μm), as confirmed by XRD and SEM data. Photovoltaic investigations show that the three‐step method results in higher solar cell efficiency (15 % enhancement in efficiency) with a better reproducibility than the conventional two‐step deposition method.     

Reaction of pentaammine(urea-O)cobalt(III) cation with chlorine and hypochlorous acid in aqueous solution

Summary The Co(NH₃)₅[OC(NH₂)₂]³⁺ cation in aqueous acid reacts with chlorine and hypochlorous acid, with two sequential steps observed in each case. Rate constants for both steps show a first-order dependence on [oxidant], with k₁/k₂ always <20, but varying with the choice of reactant and acid. Rate constants with Cl₂ as reactant are faster than with HOCl, possibly related to preferential attack by Cl⁺ compared with OCl^– on the bound urea. Competition by ions (HSO ₄ ^– , Cl^– or NO ₃ ^– ) measured by product analysis of reactions conducted in 1 M acid produced competition ratios R (R=[CoX]/[CoOH₂][X]) which are similar to values determined with a range of leaving groups previously, indicating a mechanistic constancy. No formation of Co(NH₃)₅Cl²⁺ was observed in reactions conducted in H₂SO₄ or HNO₃, implying that free Cl^– is not generated at the reaction site and captured by the metal ion. Electronic and vibrational spectra of the intermediate formed in the two stage reaction is indicative of a change from an O-bound to an N-bound ligand in forming that intermediate, although it cannot be a simple isomerization due to the dependence on [oxidant]. A possible mechanism is discussed.     

Heterogeneous Ziegler‐Natta Catalyst Based on Neodymium for the Stereospecific Polymerization of Butadiene

The synthesis of a series of neodymium complexes supported on modified silica is reported. In an initial step the silanol groups were masked by a Lewis acid (BCl₃, AlCl₃, TiCl₄, ZrCl₄, SnCl₄, SbCl₅, HfCl₄), and then a soluble arene complex Nd(η⁶‐C₆H₅Me)(AlCl₄)₃ formed in situ was reacted with the modified silica. The supported complexes are active and highly stereospecific for butadiene polymerization; 1,4‐cis insertion is superior by 99%. The catalyst based on a treatment of silica with BCl₃ is the most efficient.     

Catalytic Hydroxylation of Benzene to Phenol by Dioxygen with an NADH Analogue

Hydroxylation of benzene by molecular oxygen (O₂) occurs efficiently with 10‐methyl‐9,10‐dihydroacridine (AcrH₂) as an NADH analogue in the presence of a catalytic amount of Fe(ClO₄)₃ or Fe(ClO₄)₂ with excess trifluoroacetic acid in a solvent mixture of benzene and acetonitrile (1:1 v/v) to produce phenol, 10‐methylacridinium ion and hydrogen peroxide (H₂O₂) at 298 K. The catalytic oxidation of benzene by O₂ with AcrH₂ in the presence of a catalytic amount of Fe(ClO₄)₃ is started by the formation of H₂O₂ from AcrH₂, O₂, and H⁺. Hydroperoxyl radical (HO₂^.) is produced from H₂O₂ with the redox pair of Fe³⁺/Fe²⁺ by a Fenton type reaction. The rate‐determining step in the initiation is the proton‐coupled electron transfer from Fe²⁺ to H₂O₂ to produce HO^. and H₂O. HO^. abstracts hydrogen rapidly from H₂O₂ to produce HO₂^. and H₂O. The Fe³⁺ produced was reduced back to Fe²⁺ by H₂O₂. HO₂^. reacts with benzene to produce the radical adduct, which abstracts hydrogen from AcrH₂ to give the corresponding hydroperoxide, accompanied by generation of acridinyl radical (AcrH^.) to constitute the radical chain reaction. Hydroperoxyl radical (HO₂^.), which was detected by using the spin trap method with EPR analysis, acts as a chain carrier for the two radical chain pathways: one is the benzene hydroxylation with O₂ and the second is oxidation of an NADH analogue with O₂ to produce H₂O₂.     

Synthesis, crystal structure, and photophysical properties of acid (H3O)2[{W6Br8}Br6] · 4H2O

Compound (H₃O)₂[{W₆Br₈}Br₆] · 4H₂O is synthesized by the reaction of polymeric tungsten bromide W₆Br₁₂ with hydrobromic acid in an ethanolic solution. The structure of the compound is a packing of counterions H₃O⁺ and [{W₆Br₈}Br₆]^2? and crystallization water molecules joined with each other by an extended system of hydrogen bonds. The finely crystalline sample of the complex exhibits luminescence, whose spectrum has a broad profile from ??500 nm to more than 950 nm with a maximum at ??715 nm, with an absolute quantum yield of ??0.225. The emission is characterized by the biexponential decay with lifetimes of ??2.2 and ??8.4 ??s.     

The influence of lithium complexing agents on the regioselectivity of reductions of substituted 2-cyclohexenones by LiAlH4 and LiBH4

A reversal of regioselectivity of LiAlH₄ or LiBH₄ reduction of 2-cyclohexenone induced by addition of [2.1.1]-cryptand to the reaction medium is accompanied by a rate decrease. In the absence of the cryptand, carbonyl attack predominates (C₁:C₃ = 86:14 with LiAlH₄ in THF). In the presence of the cryptand, double bond attack is favoured (C₁:C₃= 14:86). This effect is larger with LiAlH₄ than with LiBH₄. This trend is general in the case of five substituted 2-cyclohexenones. Using 12-crown-4 as a Li⁺ coordinator, a change in regioselectivity occurs but it is less pronounced than with the cryptand.     

Reaktionen von π-Organokomplexen des Nickels mit tertiären Phosphanen

Reactions of π-Organonickel Complexes with Tertiary Phosphanes In a hexane solution Ni(C₅H₅)₂ reacts with PBu₃ or Ph₂PBu forming the nickel(O) complexes Ni(PBu3)₄ or Ni(Ph₂PBu)₄ (A). Under the same conditions only one cyclopentadienyl ligand is substituted by PhPBu₂ and the nickel(I) compound (C₅H₅)Ni (PhPBu₂)₂ (B) is obtained. Products of the reactions between B and α,α′-dipyridyl, hydrogen chlorid in ether, or Ni(PhPBu₂),Cl₂ are Ni(dipy)₂, [PhPHBu₂]₂[NiCl₄], or (C₅H₅) Ni(PhPBu₂)₂Cl. By the reaction with HgCl₂ a cyclopentadienyl compound of an unknown structur is formed. The compound Ni(PhPBu₂)₄ which is analogous to A is synthesized by the reduction of bis(acety1acetonato)-nickel with Et₂AlOEt in the presence of PhPBu₂ or by the reaction of bis (cyclooctadiene-1,5)-nickel with PhPBu₂.     

Diboron Bonds Between BX3 (X=H,F, CH3) and BYZ2 (Y=H,F; Z=CO,N2, CNH)

The ability of B atoms on two different molecules to engage with one another in a noncovalent diboron bond is studied by ab initio calculations. Due to electron donation from its substituents, the trivalent B atom of BYZ₂ (Z=CO, N₂, and CNH; Y=H and F) has the ability to in turn donate charge to the B of a BX₃ molecule (X=H, F, and CH₃), thus forming a B⋅⋅⋅B diboron bond. These bonds are of two different strengths and character. BH(CO)₂ and BH(CNH)₂, and their fluorosubstituted analogues BF(CO)₂ and BF(CNH)₂, engage in a typical noncovalent bond with B(CH₃)₃ and BF₃, with interaction energies in the 3–8 kcal/mol range. Certain other combinations result in a much stronger diboron bond, in the 26–44 kcal/mol range, and with a high degree of covalent character. Bonds of this type occur when BH₃ is added to BH(CO)₂, BH(CNH)₂, BH(N₂)₂, and BF(CO)₂, or in the complexes of BH(N₂)₂ with B(CH₃)₃ and BF₃. The weaker noncovalent bonds are held together by roughly equal electrostatic and dispersion components, complemented by smaller polarization energy, while polarization is primarily responsible for the stronger ones.     

Crystal structure of Cs8[α-BW12O40][RhCl6]·5·5H2O double salt

By heating in the air [HBW₁₁O₃₉]⁸⁻ with [Rh₂(CH₃COO)₄(H₂O)₂] in the excess of tungstate followed by crystallization in the presence of CsCl, a double salt of Cs₈[6h-BW₁₂O₄₀][RhCl₆]·5.5H₂O is obtained and structurally characterized. Its crystal structure is determined by single crystal X-ray diffraction. The structure is ionic with Cs⁺ cations, [BW₁₂O₄₀]⁵ anions with the Keggin structure, and [RhCl₆]³ octahedral anions.     

High n-value phases in the complex bismuth oxides with layered structure,Bi2CaNan−2NbnO3n+3

Complex bismuth oxides with layered structure are prepared with a series of compositions in the system Bi₂CaNb₂O₉-NaNbO₃. It is found by X-ray powder diffraction that each compound is composed of more than two phases, which are described by a formula Bi₂CaNa_n?2Nb_nO_3n+3, e.g., in the sample with the nominal composition Bi₂CaNb₂O₉ · 8NaNbO₃, the phases with n = 6 to 8 appear predominantly. These phases are closely intergrown to each other. Moreover, high-resolution electron microscopy reveals that microsyntactic intergrowth frequently occurs in the phases with n > 5. The occurrence of the latter intergrowth is explained in terms of the bond length obtained.     

Methylmetall-bis(trimethylsilyl)amidoderivate des Aluminiums,Galliums und Arsens

Methyl Metal Bis(trimethylsilyl)amido Derivatives of Aluminium, Gallium, and Arsenic MeAl[N(SiMe₃)₂]₂ (Me ? CH₃) has been prepared by the reaction of AlMe₃ with HN(SiMe₃)₂ in a 1:2 molar ratio. The homologue Gallium compound (as well as the Aluminium derivative) is formed in good yields by the interaction of MeMcl₂ (M = Al, Ga) with Li- and Na[N(SiMe₃)₂], respectively. MeAs[N(SiMe₃)₂]₂ is formed by the reaction of AsCl₃ and Na[N(SiMe₃)₂] in a 1:3 molar ratio. These colourless amido derivatives are monomeric in solution, they have been characterized by analyses, mass, n.m.r. (¹H and ¹³C), and especially by i.r. and Raman spectra.     

Stability of B12(CN)122−: Implications for Lithium and Magnesium Ion Batteries

Multiply charged negative ions are seldom stable in the gas phase. Electrostatic repulsion leads either to autodetachment of electrons or fragmentation of the parent ion. With a binding energy of the second electron at 0.9 eV, B₁₂H₁₂^2? is a classic example of a stable dianion. It is shown here that ligand substitution can lead to unusually stable multiply charged anions. For example, dodecacyanododecaborate, B₁₂(CN)₁₂^2?, created by substituting H by CN is found to be highly stable with the second electron bound by 5.3 eV, which is six times larger than that in the B₁₂H₁₂^2?. Equally important is the observation that CB₁₁(CN)₁₂^2?, which contains one electron more than needed to satisfy the Wade‐Mingos rule, is also stable with its second electron bound by 1.1 eV, while CB₁₁H₁₂^2? is unstable. The ability to stabilize multiply charged anions in the gas phase by ligand manipulation opens a new door for multiply charged species with potential applications as halogen‐free electrolytes in ion batteries.     

Full Protection of Intensely Luminescent Gold(I)–Silver(I) Cluster by Phosphine Ligands and Inorganic Anions

An intensely luminescent gold(I)–silver(I) cluster [(C)(AuPPhpy₂)₆Ag₆(CF₃CO₂)₃](BF₄)₅ (PPhpy₂=bis(2‐pyridyl)phenylphosphine) ( 3 ) is synthesized by the reaction of [(C)(AuPPhpy₂)₆Ag₄](BF₄)₆ with AgCF₃CO₂. All eight faces of the octahedral C@Au₆ core in 3 are capped, that is, six faces are capped by silver ions and two by tetrafluoroborates. Cluster 3 is intensely luminescent in solution with a quantum yield of 92 %. Ligation of CF₃CO₂⁻ ions is vital for the construction and emission properties of 3 , as confirmed by DFT calculations. BF₄⁻ ions are involved in the protecting sphere of the metal core, as evidenced by ¹⁹F NMR data. The participation of phosphines, CF₃CO₂⁻, and BF₄⁻ ions in the protection of the emissive core and the enhancement of the rigidity of the cluster result in the high emission efficiency. This is the first example of organic ligands and inorganic anions forming a rigid protecting sphere for luminescent coinage‐metal clusters.     

Neue Beobachtungen zum chemischen Transport von GeO2. V. Zur Mineralisatorwirkung von Na-Verbindungen auf den Modifikationswechsel von GeO2

New Observations on the Chemical Transport of GeO₂. V. Minerlizer Effect of Sodium Compounds on the Transformation of GeO₂ Modifications The formation of GeO₂(tetr.) which is kinetically hindered is catalyzed by all Na-containing substances which react with GeO₂ to Na₄Ge₉O₂₀. Since Na₄Ge₉O₂₀ doesn't migrate over the gas phase in a closed system the effect of mineralization is limited to the region where the mineralisator is placed. In the presence of chlorine the formation of GeO₂(tetr.) is catalyzed by NaCl if there are also seed crystals of this modification. Cl₂ reacts with Na-Germanates and Na-Silicates to NaCl. In this case the effect of mineralization is not limited to the region where the mineralizator was initially placed. The temperature of 1306 K at which the modification of GeO₂(tetr.) changes into GeO₂(hex.) can be shifted to lower values by small amounts of SiO₂ built into the hexagonal modification. The substitution of SiO₂ for GeO₂ is catalyzed either in the presence of NaCl by a gas phase containing halogen or by a Na₂O/GeO₂/SiO₂-melt.     

The structure of a valinomycin–hexaaquamagnesium trifluoromethanesulfonate compound

Valinomycin is a naturally occurring cyclic dodecadepsipeptide with the formula cyclo‐[d ‐HiVA→l ‐Val →l ‐LA→l ‐Val]₃ (d ‐HiVA is d ‐α‐hydroxyisovaleic acid, Val is valine and LA is lactic acid), which binds a K⁺ ion with high selectively. In the past, several cation‐binding modes have been revealed by X‐ray crystallography. In the K⁺, Rb⁺ and Cs⁺ complexes, the ester O atoms coordinate the cation with a trigonal antiprismatic geometry, while the six amide groups form intramolecular hydrogen bonds and the network that is formed has a bracelet‐like conformation (Type 1 binding). Type 2 binding is seen with the Na⁺ cation, in which the valinomycin molecule retains the bracelet conformation but the cations are coordinated by only three ester carbonyl groups and are not centrally located. In addition, a picrate counter‐ion and a water molecule is found at the center of the valinomycin bracelet. Type 3 binding is observed with divalent Ba²⁺, in which two cations are incorporated, bridged by two anions, and coordinated by amide carbonyl groups, and there are no intramolecular amide hydrogen bonds. In this paper, we present a new Type 4 cation‐binding mode, observed in valinomycin hexaaquamagnesium bis(trifluoromethanesulfonate) trihydrate, C₅₄H₉₀N₆O₁₈·[Mg(H₂O)₆](CF₃SO₃)₂·3H₂O, in which the valinomycin molecule incorporates a whole hexaaquamagnesium ion, [Mg(H₂O)₆]²⁺, via hydrogen bonding between the amide carbonyl groups and the hydrate water H atoms. In this complex, valinomycin retains the threefold symmetry observed in Type 1 binding, but the amide hydrogen‐bond network is lost; the hexaaquamagnesium cation is hydrogen bonded by six amide carbonyl groups. ¹H NMR titration data is consistent with the 1:1 binding stoichiometry in acetonitrile solution. This new cation‐binding mode of binding a whole hexaaquamagnesium ion by a cyclic polypeptide is likely to have important implications for the study of metal binding with biological models under physiological conditions.     

Mechanism of Polymerization of 1, 3-Dioxolane Initiated by (C2H5)3 O+SbCl6 and SbCl5

The kinetics of polymerization of 1, 3-dioxolane (DiOX) initiated by (C₂H₅)₃O⁺SbCl₆ and SbCl₅ has been studied and the elementary stages of the process have been considered. The polymerization of DiOX by (C₂H₅)₃O⁺SbCl₆-is shown to proceed at a steady rate to high conversion. A constant concentration of active centers in the system is maintained due to the equal rates of decomposition of active centers and disproportionation. The nonsteady-state character of DiOX polymerization initiated by SbCl₅is associated with a relatively lower stability of the counter-ion SbCl₅ OR^? compared with SbCl₆. The initiation of DiOX polymerization by (C₂H₅)₃O⁺SbCl₆ proceeds without hydride-transfer reactions, and the concentration of active centers in the system is determined not by processes taking place in the initiation stage, but by the existence of a definite kind of equilibrium with the participation of active centers.