Reactions of stabilizer compounds. IV. ESR studies of the formation of stable nitroxyl radicals in the photooxidation of polypropylene containing hindered amine light stabilizers

ESR studies of the formation of stable nitroxyl radicals in the photooxidation of polypropylene containing 2,2,6,6-tetramethyl-4-hydroxypiperidine (II) and the commercial light stabilizer bis(2,2,6,6-tetramethyl-4-piperidinyl)sebacate (III) are described. Spectra of the stable nitroxyl radicals in solid polymer and in solution after extraction from the polymer were obtained. The extract from photooxidized polypropylene containing the bifunctional stabilizer (III) showed only the mononitroxyl radical. The possible formation of polymer-bonded nitroxyl radicals from (III) is discussed.     

A study of the photolysis of a commercial hindered amine light stabilizer

The photolysis of a commercial hindered amine light stabilizer (HALS) has been studied with a range of experimental methods. The results show that the stabilizer is easily photolyzed and photolysis mechanisms are proposed.     

Highly sensitive determination of a polymeric hindered amine light stabilizer in polypropylene by reactive thermal desorption-gas chromatography using nitrogen-specific detection

Highly sensitive and specific determination of trace amounts of a polymeric hindered amine light stabilizer (HALS) in polypropylene (PP) materials could be established by improving reactive thermal desorption-gas chromatography (RTD-GC) in the presence of an organic alkali, tetramethylammonium hydroxide. By using nitrogen-phosphorus detection, highly selective detection of the HALS-related components was attained. In addition, the use of a polar poly(ethylene glycol) separation column alleviated the adsorption of minor specific pyrolysis products. This modified RTD-GC method allowed the determination of the polymeric HALS (Mr 1900) in PP even for trace concentrations between 100 and 500 ppm, through observing selectively the characteristic products containing a tetramethylpiperidine moiety, which had been impossible to detect under the previous RTD-GC conditions using a non-polar separation column and conventional flame ionization detection.     

Synthesis of a water-soluble macromolecular light stabilizer containing hindered amine structures

A novel water-soluble macromolecular light stabilizer was synthesized by grafting 2-chloro-4,6-bis- [(2,2,6,6-tetramethylpiperidin-4-yl)amino]-l,3,5-triazine onto polyvinylamine.The intermediate 2- chloro-4,6-bis-[(2,2,6,6-tetramethylpiperidin-4-yl)arnino]-1,3,5-triazine and the obtained macromolecular light stabilizer were characterized by ~1H NMR,HRMS,IR and UV spectroscopy.Cotton fabrics dyed with C.l.Reactive Yellow 145,C.I.Reactive Red 195 and C.I.Reactive Blue 19 were finished with the macromolecular light stabilizer,and the lightfastness of the dyes was tested.The results showed that the lightfastness of the reactive dyes was improved by 0.5-1.0 grade after being finished and the macromolecular light stabilizer exhibited good wash fastness and thermal stability.     

Determination of a polymeric hindered amine light stabilizer in polypropylene formulated with magnesium hydroxide flame retardant by reactive thermal desorption-gas chromatography.

A polymeric hindered amine light stabilizer (HALS), Tinuvin 622 (MW [symbol: see text] 4000), in PP materials formulated with a magnesium hydroxide flame retardant was determined by reactive thermal desorption (RTD) gas chromatography (GC). Two kinds of the HALS components that were formed through the RTD in the presence of tetramethylammonium hydroxide [(CH3)4NOH, TMAH] were clearly observed in the chromatograms of the PP samples, with negligible interference from the other additives and the PP substrate. Here, the coexisting flame retardant was proved to affect significantly the RTD process of the occluded HALS. As a result, the recovery of the HALS components in the RTD-GC chromatograms of the PP samples increased with increase in the content of the flame retardant. This enhancement of the HALS recovery is attributed mainly to the preferential exposure of the HALS on the surface of the ground PP sample through the interaction between the polymeric HALS and the flame retardant in the molten PP during kneading. In spite of such a considerable action of the flame retardant, the observed intensities of the characteristic peaks of HALS by RTD-GC showed a good linear relationship with the HALS content in the PP samples with constant content of the flame retardant (50 phr); this relationship could be used as the calibration line for the determination of the polymeric HALS in the PP materials containing the flame retardant.     

Quantitative analysis of an oligomeric hindered amine light stabilizer in polypropylene by matrix-assisted laser desorption/ionization mass spectrometry using a solid sampling technique

A small amount of an oligomeric hindered amine light stabilizer (HALS) (Adekastab LA-68LD) in polypropylene (PP) materials was directly determined by solid sampling matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) using an internal standard method. First the matrix reagent (dithranol), 20 mg, and the empirically selected internal standard, angiotensin I (MW = 1296.5), 5 microg, were premixed in the solid state. The matrix mixture was then co-ground with the PP sample containing the HALS in liquid nitrogen using a freezer mill. The powdered sample mixture was spotted on the sample plate, suspended in ion-exchanged water, dried to adhere on the plate, and subjected to MALDI-MS. Three series of the HALS components accompanied by the oxidized species were clearly observed as their molecular ions (M*+)) along with that of the internal standard in the mass spectra. A fairly good linear relationship (R2 = 0.9991) with a relative standard deviation of ca. 11% was observed between the relative peak intensities of the HALS components and the HALS contents ranging from 0.1-2.5 wt%, which could be used as the calibration line to determine the HALS content in PP composites directly by MALDI-MS. The UV-exposed PP composite samples were evaluated by this method to interpret the photostabilizing action of HALS in the PP materials based on the observed change in the relative abundances of the original and oxidized HALS components as a function of UV-exposure time.     

The oxidation of hindered amine light stabilizers to nitroxy radicals in solution and in polymers

Cyclohexane and three polyolefins (PE, PP and EPM) have been oxidized by γ-irradiation, and the concentration of nitroxy radicals derived from a typical HALS added either before or after irradiation has been studied by ESR spectroscopy. The results indicate that HALS is rapidly oxidized by peroxy radicals under irradiation and that afterwards it can be oxidized more slowly by hydroperoxides. This last reaction is, however, very limited.     

Quantitative analysis of hindered amine light stabilizers by CZE with UV detection and quadrupole TOF mass spectrometric detection

The current work describes the development of a CZE method with quadrupole QTOF‐MS detection and UV detection for the quantitation of Cyasorb 3529, a common hindered amine light stabilizer (HALS), in polymer materials. Analysis of real polymer samples revealed that the oligomer composition of Cyasorb 3529 changes during processing, a fact hampering the development of a straightforward method for quantitation based on calibration with a Cyasorb 3529 standard. To overcome this obstacle in‐depth investigations of the oligomer composition of this HALS using QTOF‐MS and QTOF‐MS/MS had to be performed whereby 22 new oligomer structures, in addition to the ten structures already described, were identified. Finally, a CZE method for quantitative analysis of this HALS was developed starting with a comprehensive characterization of a Cyasorb 3529 standard using CZE‐QTOF‐MS, subsequently allowing the correct assignment of most Cyasorb 3529 oligomers in an electropherogram with UV detection. Employing the latter detection technique and hexamethyl‐melamine as internal standard, peak areas obtained for the melamine could be correlated with those from the triazine ring, the UV‐absorbing unit present in the HALS. This approach finally allowed proper quantitation of the single oligomers of Cyasorb 3529, an imperative for the quantitative assessment of this HALS in real polymer samples.     

Formation of radicals in the photodestruction of polypropylene

Conclusions In the UV irradiation (wavelength interval 236–800 m) of polypropylene (atactic and isotactic) and polyethylene at temperatures of 77–123°K, a substantial amount (10¹⁸–10¹⁹ g^–1) of radicals of various types are formed. Hydroperoxide groups are among the main sources of radicals in the case of oxidized polypropylene.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 778–783, April, 1967.     

Rapid determination of oligomeric hindered amine light stabilizers in polymeric materials

Hindered amine light stabilizers are essential for the stabilization of synthetic polymers, particularly for materials used for outdoor applications. Although up to now a considerable number of studies dealing with the analytics of this class of stabilizers had been published, especially the determination of oligomeric hindered amine light stabilizers is still an analytical challenge. In the current work, a fast and simple liquid chromatographic method for the quantitative determination of oligomeric hindered amine light stabilizers is presented. A key aspect of this method is their completely different retention behavior depending on the pH, enabling a single peak elution approach by a pH gradient run. This allows a quantitation with simple UV detection independent of the actual oligomeric composition. Calibration curves within the concentration range relevant for the analysis of real polymer samples (LOQ = 70 mg/L) were constructed with R ² values above 0.99. Spiked extracts from polyolefin samples showed recovery rates between 97.3 and 102.9% for five different commercial hindered amine light stabilizers. Relative standard deviations were between 2.0 and 3.9%. Furthermore, it was demonstrated that the employed approach can be easily adapted for mass spectrometry detection.     

Quenching of singlet oxygen by hindered amine light stabilisers. A flash photolytic study

Rate constants for the quenching of singlet oxygen (¹O₂, ¹δ_g) for a series of piperidines, piperidine-N-oxyl free radicals and some commercially used hindered amine light stabilisers (HALS) have been measured by a laser flash photolysis method. Quenching rate constants are in the order: piperidine-N-oxyl free radicals ≤ secondary piperidines < tertiary piperidines. For some commercial HALS, ¹O₂ quenching rate constants and the light protective effect towards polypropylene photo-oxidation have been compared. No correlation has been found between the stabilizing action and the quenching efficiency towards ¹O₂. The data obtained point to little contribution of singlet oxygen to the key steps of polyolefin photo-oxidation.     

Structural transformations of isotactic polypropylene induced by heating and UV light

Samples of commercial-grade isotactic polypropylene, both neat and nucleated with a specific β-nucleating agent (N,N′-dicyclohexylnaphthalene-2,6-dicarboxamide), were exposed to annealing and UV irradiation. Structural parameters were assessed by X-ray diffraction. Tensile mechanical characteristics were derived from stress–strain curves. The specific nucleation caused more than 70% of the crystalline phase to occur in the trigonal β-modification. The content of the β-phase introduced by the specific nucleation distinctly decreased after a certain induction period, different for annealing at 140 °C and UV exposure. At the same time, the size of the -crystallites increased while the size of the β-crystallites remained virtually unchanged. These results indicate the β →  recrystallization. On the other hand, the strain-at-break values continuously and monotonically decreased with increasing exposure time reflecting defect formation, both at the surface and in the bulk of the specimens. The differences between the effects of thermal ageing and UV degradation are discussed.     

Analysis and fate of the hindered amine light stabilizer Tinuvin 622 in polyester powder coatings using high performance liquid chromatography / time of flight mass spectrometry

Hindered amine light stabilizers are used to protect polymers from heat- and light-induced degradation. In this study the oligomeric stabilizer Tinuvin 622 was analysed in-depth employing high performance liquid chromatography/time of flight mass spectrometry (HPLC/TOF-MS) to differentiate products of different manufacturers in respect of their terminating groups and oligomer length. Additionally, the behaviour of the stabilizer in uncured and cured polyester powder coatings was investigated regarding its interaction with the other coating components and chemical changes during the crosslinking process. The extraction efficiency was determined as a function of oligomer length and coating colour.     

The effect of hindered amine light stabilizers on the photooxidative stability of high-density polyethylene

The photoprotective effectiveness of various polymeric and nonpolymeric hindered amine light stabilizers (HALS) was determined by exposing samples of high-density polyethylene (HDPE) containing these additives to ultraviolet (UV) light and measuring the resultant oxygen uptake characteristics. Values of the initial quantum yield for oxygen uptake calculated for these formulations indicate that the higher molecular weight HALS compounds are less effective photostabilizers than the nonpolymeric HALS, and this is partly attributable to their decreased mobility in the polymer matrix. It was further found that the addition of an ultraviolet absorber (UVA) to a formulation containing a polymeric HALS compound enhances its photostability, although this phenomenon may be partly due to synergism between the UVA and the antioxidant, the latter having been added as part of the base stabilization. The antagonism which exists between certain sulfur-containing antioxidants and HALS compounds was also investigated and it was found that the lower molecular weight sulfur-containing antioxidants exhibit the greatest degree of antagonism. The results confirm that the mobility in the polymer matrix of the stabilizer system can serve as an explanation of its effectiveness. The article provides evidence that the technique of oxygen uptake monitoring is a sensitive and rapid method of assessment of polymer photostability in the presence of stabilizer systems.     

Photo-stabilising performance of a hindered piperidine compound in polypropylene film: Anti-oxidant/light stabiliser effects

The effect of various primary and secondary anti-oxidants and light stabiliser systems on the photo-stabilising performance of a hindered piperidine compound bis[2,2,6,6-tetramethyl-4-piperidinyl]-sebacate, in polypropylene film has been examined. None of the anti-oxidants or light stabilisers gave an additive effect with the hindered piperidine compound. In many cases antagonistic effects were observed. The effects observed are discussed in relation to our current understanding of the mechanistic behaviour of these hindered piperidine systems.