Studies of some new bioactive acrylic esters

Four typical bioactive esters of acrylic monomers, N-p-acryloxybenzoyloxysuccinimides, 3-ac-ryloxy-4-oxo-3,4-dihydro-1,2,3-benzotriazines, N-acryloxy-5-norbornene-2,3-dicarboximides, and I-p-acryloxybenzoyloxybenzotriazoles, were Synthesized and polymerized as reactive polymers. Twelve new monomers were prepared by coupling acrylic acid, methacrylic acid, p-acryloxybenzoic acid, or p-methacryloxybenzoic acid with four N-hydroxy compounds such as N-hydroxysuccinimide (HOSu), 3-hydroxy-4-oxo-3,4-dihydro-1,2,3-benzotriazine (HOObt), N-hydroxy-5-norbornene-2,3-dicarboximide (HONB), and I -hydroxybenzotriazole (HOBT) in the presence of dicyclohexylcarbodimide. All monomers polymerized readily in solution with azobisisobutyronitrile (AIBN) as free radical initiator. The resulting reactive polymers with reactive ? OSu, ? OObt, ? ONB, or ? OBT group on the side chain are equally reactive toward n-butylamine at room temperature in the formation of corresponding polyacrylamides. Reactive polymers were used to immobilizetrypsin. It has been found that poly(N-p-methacryloxybenzoyloxy-5-norbornene-2,3-dicarboximide)-trypsin matrix had high activity around three times that of the poly(N-methacryloxy-5-norbornene-dicarboximide)-trypsin matrix. It is proposed that this activity may be due to the presence of a long spacer arm with a hydrophobic and rigid benzene ring between the ligand and matrix. The reactive poly(N-p-methacryloxybenzoyloxysuccinimide-p-methacryloxybenzoic acid) copolymer was used to immobilize the serum protein. This immobilized protein was a hopeful bioactive solid immunoadsorbent.     

聚酰胺的合成——N-羟基-5-降冰片烯-2,3-双甲酰亚胺的双活性酯与脂族二胺间在温和条件下的缩聚反应

<正> 在合成聚酰胺的研究中,关于由N-羟基化合物O,O′-双酰基衍生物与二元胺在温和条件下合成聚酰胺的报道较少。Overberger及ebenda首先研究了N-羟基丁二酰亚胺的双活性酯及N-羟基邻苯二甲酰亚胺的双活性酯与派嗪间的缩聚反应。Ueda、Imai等则报道了另两类活性双酯,如1-羟基苯并三氮唑的双活性酯及O,O′-间苯二甲酰双肟与二元胺间的缩聚合成聚酰胺的结果。     

Synthesis of polyamide containing optically active thymine derivative as a grafted pendant

A new route to polyamides containing optically active thymine groups as pendants has been established. The method is based on the grafting of (–) and (±)-2-(thymin-1-yl)propionic acid [(–) and (±) TPA] onto a polyamide containing hydroxyl groups. The hydroxy polyamide was prepared by selective N-acylation of an active diester of N-hydroxy-5-norborene-2,3-dicarboxamide (HONB), N,N'-(isophthaloyl-dioxy)-bis(5-norbornene-2,3-dicarboximide) (IPBONB), with 1,3-diamino-2-hydroxypropane (AHP). Model compounds (?) and (±)-(1,3-dibenzoylamino-2-propyl)2-(thymin-1-yl)propionate[(?) and (±) (BAPTP)] were prepared by direct, low-temperature esterification before synthesizing the polymer.     

Synthesis of diols containing 5-benzyluracil base and their polymers

Preparation of analogs of acyclic nucleoside, two diols containing 5-benzyluracil base derived from 2-(5-benzyluracil-1-yl)propanoic acid (BUPA), and the corresponding model polymers of polynucleotide with linear polyester backbone and 2-(5-benzyluracil-1-yl)propionamido-type pendant as a side chain are described. N-(1′,3′-Dihydroxy-2′-methyl-2′-propyl)-2-(5-benzyluracil-1-yl)propionamide (HEBUPA) and its isomer N(β,β′-dihydroxyethyl)-2-(5-benzyluracil-1-yl)propionamide (HEBUPA) were prepared through the selective N-acylation of primary aminodiol, 2-methyl-2-amino-1,3-propanediol and secondary aminodiol, diethanolamine with BUPA, respectively, by the active ester-N-hydroxy-5-norbornene-2,3-dicarboximide (HONB) method. The resulting diols were polycondensed with active diamide of benzotriazole (HBT) such as 1,1′-(terephthaloyl)bisbenzotriazole (PBBT), 1,1′-(isophthaloyl)bisbenzotriazole (IPBBT), 1,1′-(sebacocyl)bisbenzotriazole (SeBBT), giving semirigid and flexible polyesters containing 5-benzyluracil derivative as the side group, by the selective O-acylation of active diamide-benzotriazole technique. Diols HMBUPA and HEBUPA were found to be very potent inhibitors of uridine phosphorylase isolated from Sarcoma 180 cells, with K_i values of 0.13 and 0.11 μM, respectively.     

Building libraries of skeletally diverse scaffolds from novel heterocyclic active methylene compound through multi-component reactions

Libraries of skeletally diverse potential bioactive polycyclic/spirocyclic heterocyclic compounds; 2-amino-7,9-dimethyl-5-oxo-4-aryl-4,5,6,7-tetrahydropyrano[2,3-d]pyrazolo[3,4-b]pyridine-3-carbonitrile, 2′-amino-7′,9′-dimethyl-2,5′-dioxo-6′,7′-dihydro-5′H-spiro[indoline-3,4′-pyrano[2,3-d]pyrazolo[3,4-b]pyridine]-3′-carbonitrile, and 5,5′-(arylmethylene)bis(4-hydroxy-1,3-dimethyl-1H-pyrazolo[3,4-b]pyridin-6(7H)-one) have been synthesized through a multi-component reaction using novel heterocyclic active methylene compound 4-hydroxy-1,3-dimethyl-1H-pyrazolo[3,4-b]pyridine-6(7H)-one as one of the building blocks. This protocol can be considered to be an efficient and eco-friendly strategy for diversity oriented synthesis.     

A NEW ACTIVE DIESTER FOR SELECTIVE POLYMERIZATION TO FORM FUNCTIONAL POLYAMIDES

A new synthetic route to polyamides and hydroxyl polyamides was established, based on the selecting (?)-acylation of three novel typical active diesters: the active diester of N-hydroxy- (?) 4-epoxy-5-cyclohexene-2, 3-dicarboximide( HOEC), such as N, N'-(temphthaloyldioxy) bis(1, 4- epoxy - 5 - cyclohexene- 2, 3 - dicarboximide.) ( PBOEC), N, N'- ( isophthaloyl - dioxy) bis (1,4-epoxy-5-cyclohexene-2, 3-dicarboximide)(IPBOEC) and N, N' -(adipoyldioxy) his (1,4-epoxy-5-cyclohexene-2, 3-dicarboximide) ( ADOEC)with aliphatic diamines and 1,3-diamino-2-hydroxypropane. The polycondensation occurs at room temperature in solution without added catalyst. Dipolar aprotic solvents which include dimethyl sulfoxide, N- methyl - 2- pyrrolidone and dimethylformamide were used as solvents for polymerization. The selective N-acylation of two active diesters was performed as a model reaction study.     

Chemoenzymatic synthesis of both enantiomers of 3-hydroxy-2,3-dihydro-4H-chromen-4-one

4-Oxo-3,4-dihydro-2-chromen-3-yl acetate is synthesized using manganese(III)acetate starting from 2,3-dihydro-4H-chromen-4-one. K₂CO₃ mediated hydrolysis of 4-oxo-3,4-dihdro-2-chromen-3-yl acetate furnished 3-hydroxy-2,3-dihydro-4H-chromen-4-one in high yield.The enantioselective hydrolysis of (±)-4-oxo-3,4-dihydro-2-chromen-3-yl acetate in various organic solvent-phosphate buffer (pH7) systems and enantioselective transesterification of (±)-3-hydroxy-2,3-dihydro-4H-chromen-4-one in organic solvents was investigated by screening a range of lipases. The lipase Amano PS, PPL, PLE and CCL-catalyzed asymmetric ester hydrolysis and transesterification afforded the enantiomers of 3-hydroxy-2,3-dihydro-4H-chromen-4-one and 4-oxo-3,4-dihydro-2-chromen-3-yl acetate with high enantiomeric excess (up to 97% ee) and in good yields.     

Light-induced Dehydrodimerization of 3-Hydroxypyrroles

Irradiation (λ > 280 nm) of 3-hydroxy-1H-pyrrole-2-carboxylates 1 in CH₃CN gives the [2.2′-bi(3-oxo-2,3-dihydro-1H-pyrrole)]-2-,2′-dicarboxylates 2 in reasonable to good yields. The corresponding N-methylpyrroles 3 only undergo slow photodecomposition under similar conditions. Several 2-methyl-3-oxo-2,3-dihydro-1H-pyrrole-2-carboxylates 4 and 5 were synthesized to compare their spectral data with those of the dehydrodimers 2 . A X-ray structure analysis was performed for diethyl [2,2′-bi(4,5-dimethyl-3-oxo-2,3-dihydro-1 H-pyrrole)]-2,2′-dicarboxylate ( 2b ). The originally proposed [3,3′-bi(3H-pyroole)] structure for compounds 2a - e proves incorrect.     

Synthesis and structure elucidation of the condensation products between thiophene dicarbaldehydes and aromatic amines. Potential analgesic and anti-inflammatory agents

Thiophene-3,4-dicarbaldehyde 1 reacts in the presence of 2-mercaptoethanol to yield N-aryl-5,6-dihydro-4-oxo-4H-thieno[3,4-c]pyrroles 2 and N-aryl-4-arylimino-5,6-dihydro-4H-thieno[3,4-c]pyrroles 3 , while thiophene 2,3-dicarbaldehyde 4 reacts with aromatic amines to give N-aryl-5,6-dihydro-6-oxo-4H-thieno[2,3-c]pyrroles 5 in good yields. Labeling experiments and nmr spectral analysis give evidences for the possible reaction mechanism.     

Reactions of 4-Methoxy-3-quinolinyl and 1,4-Dihydro-4-oxo-3-quino-linyl Sulfides Aiming at the Synthesis of 4-Chloro-3-Quinolinyl Sulfides

The preparation of 1,4-dihydro-4-oxo-3′-alkylthio-3,4′-diquinolinyl sulfides 3 or 1,4-dihydro-4-oxo-3-(alkylthio)quinolines 4 by acid catalysed hydrolysis of 4-methoxy-3′-alkylthio-3,4′-diquinolinyl sulfides 1 or 4-methoxy-3-(alkylthio)-quinolines 2 is described. The reactions of 4-methoxy-3′-alkylthio-3,4′-diquinolinyl sulfides 1 or 1,4-dihydro-4-oxo-3′-alkylthio-3,4′-diquinolinyl sulfides 3 with phosphoryl chloride in DMF afforded 4-chloro-3′-alkylthio-3,4′-diquinolinyl sulfides 5 . Treatment of the title compounds 1 or 3 with boiling phosphoryl chloride systems:leads to 4-chloro-3-(alkylthio)quinolines 6 and thioquinanthrene but those of alkoxy- or oxo-quinolines 2 or 4 lead to 4-chloro-3-(alkylthio)quinolines 6 . The reactions of N-methyl-4(1H)-quinolinones 3n and 4n with phosphoryl chloride directed to 4-chloro-3-(alkylthio)quinolines 6 were studied as well.     

Comparative study on polyimides from isomeric 3,3′‐, 3,4′‐, and 4,4′‐linked bis(thioether anhydride)s

Three isomeric bis(thioether anhydride) monomers, 4,4′‐bis(2,3‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,3′‐PTPKDA), 4,4′‐bis(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (4,4′‐PTPKDA), and 4‐(2,3‐dicarboxyphenylthio)‐4′‐(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,4′‐PTPKDA), were prepared through multistep reactions. Their structures were determined via Fourier transform infrared, NMR, and elemental analysis. Three series of polyimides (PIs) were prepared from the obtained isomeric dianhydrides and aromatic diamines in N‐methyl‐2‐pyrrolidone (NMP) via the conventional two‐step method. The PIs showed excellent solubility in common organic solvents such as chloroform, N,N‐dimethylacetamide, and NMP. Their glass‐transition temperatures decreased according to the order of PIs on the basis of 3,3′‐PTPKDA, 3,4′‐PTPKDA, and 4,4′‐PTPKDA. The 5% weight loss temperatures (T_5%) of all PIs in nitrogen were observed at 504–519 °C. The rheological properties of isomeric PI resins based on 3,3′‐PTPKDA/4,4′‐oxydianiline/phthalic anhydride showed lower complex viscosity and better melt stability compared with the corresponding isomers from 4,4′‐ and 3,4′‐PTPKDA. In addition, the PI films based on three isomeric dianhydrides and 2,2′‐bis(trifluoromethyl)benzidine had a low moisture absorption of 0.27–0.35%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Syntheses of stereoregular and optically active polyamides from active 4-chloro-1-benzotriazolyl diesters and diamines

A new route to prepare optically active polyamides was established, based on the polycondensation of two new active diesters: the active diesters of 4-chloro-1 hydroxybenzotriazole, such as 1,1'-(terephthaloyldioxy)bis(4-chloro-benzotriazole), and 1,1'-(isophthaloyldioxy)bis(4-chlorobenzotriazole), with optically active isomers of 2,4-diaminopentane. Dipolar aprotic solvents such as N,N-dimethylformamide and dimethyl sulfoxide were used as reaction solvents. The solution polycondensation carried out in solution at room temperature afforded optically active polyamides. The aminolysis of the two active diesters was carried out as a model reaction study.     

Five-membered 2,3-Dioxoheterocycles: LIX. Reaction of 3-Aroyl-1H-pyrrolo[2,1-c][1,4]benzoxazine-1,2,4-triones with Acyclic β-Enaminoesters. Crystal and Molecular Structure of Ethyl 3-Benzoyl-4-hydroxy-1-o-hydroxyphenyl-5-oxo-2,3-dihydro-1H-pyrrolo-2-spiro-3′-(5-methyl-2-oxo-2,3-dihydro-1H-pyrrolo-4-carboxylate)

3-Aroyl-1H-pyrrolo[2,1-c][1,4]benzoxazine-1,2,4-triones react with substituted alkyl 3-amino-2-propenoates to form substituted alkyl 3-aroyl-4-hydroxy-1-o-hydroxyphenyl-5-oxo-2,5-dihydro-1H-pyrrole-2-spiro-3′-(2-oxo-2,3-dihydro-1H-pyrrole-4-carboxylates). Crystal and molecular structure of ethyl 3-benzoyl-4-hydroxy-1-o-hydroxyphenyl-5-oxo-2,5-dihydro-1H-pyrrole-2-spiro-3′-(5-methyl-2-oxo-2,3-dihydro-1H-pyrrole-4-carboxylate) was investigated.     

Efficient preparation of Fmoc-aminoacyl-N-ethylcysteine unit, a key device for the synthesis of peptide thioesters

The synthesis of Fmoc-aminoacyl-N-ethyl-S-triphenylmethylcysteine, an N- to S-acyl migratory device for the preparation of peptide thioesters by Fmoc-SPPS (solid-phase peptide synthesis) is described. Condensation of Fmoc-aminoacyl pentafluorophenyl ester and N-ethyl-S-triphenylmethylcysteine was efficiently performed in the presence of HOOBt (3-hydroxy-3,4-dihydro-4-oxo-1,2,3-benzotriazine) in DMF. A small amount of diastereomer yielded during the reaction was easily separated by HPLC purification and the highly pure devices were obtained for most of the proteinogenic amino acids.     

Synthesis of novel dihydrothiazolo[3,2-a]pyrimidinone derivatives

Condensation of 2-amino-4-hydroxy-2-mercaptopyrimidine (2) hydrate and ethyl 4-bromocrotonate gave a mixture of ethyl 7-amino-2,3-dihydro-5-oxo-5H-thiazolo[3,2-a]pyrimidine-3-acetate (4) and 2a,3-dihydro-1-thia-5,8,8b-triazaacenaphthylene-4,7(2H)-dione (5) whereas reaction of 2 with 4-bromocrotononitrile afforded only 7-amino-2,3-dihydro-5-oxo-5H-thiazolo[3,2-a] pyrimidine-3-acetonitrile. Reaction of the tricycle 5 (which was isolated as a hemihydrate) with excess methyl iodide/potassium carbonate in dimethylformamide resulted in both ring hydrolysis and methylation to give 3,4-dihydro-1,7-dimethyl-4- [(methylthio)methyl]-2H-pyrimido[1,6-a]pyrimidine-2,6,8(1H,7H)-trione (10). Methylating 5 with excess methyl iodide/sodium methoxide in methanol also resulted in ring fragmentation and methylation but instead afforded methyl 7-methyl-amino-2,3-dihydro-5-oxo-7H-thiazolo[3,2-a]pyrimidine-3-acetate. The mechanistic aspects of these reactions are discussed.     

Synthesis of 6-Amino-5-R2-7-(6-R1-4-oxo-3,4-dihydro-2-quinazolyl)-5H-pyrrolo[2,3-b]pyrazine-2,3-dicarbonitriles

It has been found that malonodinitrile and 2-(6-R¹-oxo-3,4-dihydro-2-quinazolyl)acetonitrile in the presence of triethylamine undergo hetarylation by 5,6-dichloro-2,3-pyrazinedicarbonitrile at the active methylene group to give the triethylammonium salt of 2-(3-chloro-5,6-dicyano-2-pyrazinyl)malononitrile or 5-chloro-6-cyano(6-R¹-4-oxo-1,2,3,4-tetrahydro-2-quinazolylidene)methyl-2,3-pyrazinedicarbonitriles. Reaction of these with primary amines leads to annelation of the pyrrole ring at the pyrazine [b] edge to give 6-amino-5-R-5H-pyrrolo[2,3-b]pyrazine-2,3,7-tricarbonitriles and 6-amino-5-R²-7-(6-R¹-4-oxo-3,4-dihydro-2-quinazolyl)-5H-pyrrolo[2,3-b]pyrazine-2,3-dicarbonitriles respectively.     

Synthesis of optically active copoly(vinylamine–vinylalcohol) containing a pair of adeninyl and thyminyl pendant groups

Preparation of novel model polymers of polynucleotides with copoly(vinylamine–vinylalcohol) [P(Vam–Val)] backbone and a pair of adeninyl and thyminyl pendant groups is described. At first, direct, low temperature esterification was used to attach (?) and (±)-2-(thymin-1-yl)propionic acid [(?)TPA and (±)TPA], to the N–Cbz protected hydroxy polymer P(Vamz–Val) which was prepared by selective N-protection of N-benzyloxycarbonyloxy-5-norbornene-2,3-dicarboximide (CbzONB) with P(Vam–Val), at the hydroxy group via an ester bond. Two novel precursors P(Vamz–Ve(?)T) and P(Vamz–Ve(±)T) were obtained. Then the Cbz protecting group of P(Vamz–Ve(?)T) and P(Vamz–Ve(±)T) were removed by hydrobromic acid to give the hydrobromide salt of P(Vam–Ve(?)T) and P(Vam–Ve(±)T), respectively. Finally, the attachment of (±)-2-(adenine-9-yl)propionic acid [(±)APA] to linear P(Vam–Ve(?)T) and P(Vam–Ve(±)T) by selective N-acylation with N-hydroxy-5-norbornene-2,3-dicarboximide (HONB). This procedure gave the corresponding P(Vam–Val) having a pair of adeninyl and thyminyl pendant groups, such as P(Va(±)Ad–Ve(?)T) and P(Va(±)Ad–Ve(±)T). In contrast to the corresponding polymer models, the related segment model compounds were also prepared from threo-2-amino-4-pentanol without N-blocking-deblocking operations. The segment model compounds including four stereoisomers of highly optical purities, were separated and purified by reverse phase HPLC technique.     

Kinetics of the crosslinking reaction of a bisnadimide model compound in thermal and microwave cure processes

The kinetic studies of the crosslinking reaction of a nadic end-capped imide model compound, N,N′-(oxydi-3,4′-phenylene) bis(5-norbornene-2,3-dicarboximide), a bisnadimide, in thermal and microwave processes were investigated. The conversion of the endo isomer to exo isomer proceeds at a much lower temperature than the crosslinking reaction. The crosslinking reaction was monitored by the combined decrease in the infrared absorptions of the endo and exo isomers at 840 and 780 cm⁻¹, respectively. The decrease in the concentration of starting materials follows first-order kinetics in the thermal and microwave processes. At the same temperatures (230 or 280°C), the crosslinking reaction proceeds at about 10 times faster in the microwave process than in the thermal process. Solid-state ¹³C-NMR showed no significant loss in C=C double bond resonance in the cured products by comparison with the starting material. This study provides direct evidence that the microwave process may be an efficient method to cure nadic end-capped polyimides. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2653–2665, 1998     

Spiro[(2,3-dihydro-2-oxo-imidazo[1,2-a]pyridine)-3,3-(3,4-dihydro-2-methyl-4-oxo-2H-1,2-benzothiazine 1,1-dioxide)]-A novel product derived from piroxicam

A novel compound, spiro[(2,3-dihydro-2-oxo-imidazo[1,2-a]pyridine)-3,3-(3,4-dihydro-2-methyl-4-oxo-2H-1,2-benzothiazine 1,1-dioxide)] (3) , was isolated during an attempt to convert 4-hydroxy-2-methyl-N-(2-pyridinyl)-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide ( 1 ) (Piroxicam) to an O-trifluoromethanesulfonyl ester. A possible mechanism is offered to explain this unusual transformation.     

AN UNUSUAL ADDITION AND RING-CLOSURE REACTION OF 1-(2-BROMOETHYL)-2,3-DIHYDRO- 3-PROPYL-1,3,2-BENZO-DIAZAPHOSPHORIN-4(1H)-ONE 2-OXIDE WITH CARBON DISULFIDE FOR A NEW AND CONVENIENT SYNTHESIS OF THE FUSED PHOSPHORUS HETEROCYCLIC COMPOUND

ABSTRACT

The reaction of 1-(2-bromoethyl)-2,3-dihydro-3-propyl-1,3,2-benzodiazaphosphorin-4(1H)-one 2-oxide with carbon disulfide takes an alternative pathway in the use of different bases. The sodium hydride mediated reaction leads to the formation of the tricyclic fused 1,2,3,4,4a,4b,5,6-octahydro-6-oxo-5-propyl-4-thia-3,4b,4a-thiazphosphaphenanthridine 4a-oxide via addition of H-P bond across the double bond of carbon disulfide followed by intramolecular cyclization. In the presence of triethylamine, refluxing a mixture of 1-(2-bromoethyl)-2,3-dihydro-3-propyl-1,3,2-benzodiazaphosphorin-4(1H)-one 2-oxide with carbon disulfide in benzene takes an unusual course with formation in excellent yield of the first example of fused phosphorus heterocyclic 4-[1′-(β-bromoethyl)-4′-oxo- 3′-propyl-1′,2′,3′,4′-tetrahydro-1,3,2-benzodiazaphosphorin-2′- sulfide]-1,2,3,4,4a,4b,5,6-octahydro-6-oxo-5-propyl-3,4b, 4a-thiazphosphaphenanthridine 4a,2′-dioxide, which was confirmed by spectroscopic methods, microanalyses and single crystal X-ray structure determination.