二维复式声子晶体中基元配置对声学能带结构的影响

研究了二维复式声子晶体中基元配置对其声学能带结构的影响,发现当声子晶体的基元配置改变时,声子晶体的不可约布里渊区也会改变,而且部分能带的极值不再在高对称线上.特别地,在某些基元配置下,不可约布里渊区扩大为整个第一布里渊区.因此,对于对称性较高的复式晶格声子晶体,可用通常的方法得到能带结构,而对于对称性较低的复式晶格结构声子晶体,只有采用对整个第一布里渊区进行研究的方法,才能获得可信的能带结构及带隙.     

声子晶体的负折射

通过对声子晶体负折射的实验和理论进行梳理,提出可以通过从对称性角度理解声波在周期性结构中的散射,来理解声学负折射现象的物理机制.在此启发下,本文继而运用有限元模拟,通过改变背景介质的声学常数,成功展示了声波在声子晶体中的负折射现象.     

新型二维压电声子晶体板带隙可调性研究

设计了一种由涂有硬质材料涂层的柱状压电散射体周期性连接在四个环氧树脂薄板上构成的具有大带宽的新型二维压电声子晶体板,并利用有限元方法计算了该声子晶体板的能带结构、传输损失谱和位移矢量场.研究表明：与二组元材料构成的传统声子晶体板相比,新设计的声子晶体板的第一完全带隙频率更低,并且带宽扩大了5倍;通过在压电体表面上施加不同的电边界条件,可以实现多条完全带隙的主动调控;压电效应对能带结构有很大的影响,并且有利于完全带隙的扩大与形成.基于带隙的可调谐性,分析了可切换路径的压电声子晶体板波导,结果表明可以通过改变电边界条件来限制弹性波能量流.     

应变对单层二硫化钼能带影响的第一性原理研究

采用密度泛函理论框架下的第一性原理平面波赝势方法,研究了双轴拉应变下单层二硫化钼晶体的电子结构性质．本文的计算结果表明对单层二硫化钼晶体施加一个很小的应变（0．5％）时,其能带结构由直接带隙转变为间接带隙．随着应变的增加,能带仍然保持间接带隙的特征,且禁带宽度呈现线性下降的趋势．通过对单层二硫化钼晶体态密度和投影电荷密度的进一步分析,揭示了单层二硫化钼晶体能带变化的原因．     

高质量单层二硫化钼薄膜的研究进展

作为一种新型的二维半导体材料,单层二硫化钼薄膜由于其优异的特性,在电子学与光电子学等众多领域具有潜在的应用价值.本文综述了我们课题组在过去几年中针对单层二硫化钼薄膜的研究所取得的进展,具体包括:在二硫化钼薄膜的制备方面,通过氧辅助化学气相沉积方法,实现了大尺寸单层二硫化钼单晶的可控生长和晶圆级单层二硫化钼薄膜的高定向外延生长;在二硫化钼薄膜的加工方面,发展了单层二硫化钼薄膜的无损转移、洁净图案化加工、可控结构相变与局域相调控的方法,为场效应晶体管等电子学器件的制备与性能优化提供了基础;在二硫化钼异质结方面,研究了二硫化钼薄膜与其他二维材料形成的异质结的电学以及光电性质,为二维材料异质结的构筑和器件特性研究提供了实验参考;在二硫化钼薄膜功能化器件与应用方面,构筑了全二维材料、亚5 nm超短沟道场效应晶体管器件,验证了单层二硫化钼对短沟道效应的有效抑制及其在5 nm工艺节点器件中的应用优势;此外,利用制备的高质量单层二硫化钼和发展的器件洁净加工技术,实现了高性能柔性薄膜晶体管的集成,获得了超高灵敏度与稳定性的非接触型湿度传感器.我们在二硫化钼薄膜的制备、加工以及器件特性研究方面所取得的进展对于二硫化钼及其他二维过渡金属硫属化合物的基础和应用研究均具有指导意义.     

基于磁圆二向色谱的单层MoS_2激子能量和线宽温度依赖特性

以二硫化钼(MoS_2)为代表的过渡金属硫属化物属于二维层状材料,样品可以薄至单层.单层MoS_2是一种直接带隙半导体,在纳米逻辑器件、高速光电探测、纳米激光等领域具有广阔的应用前景.在实际应用中,温度是影响半导体材料能带结构和性质的主要因素之一.因此研究单层二维材料能带的温度依赖特性对理解其物理机理以及开展器件应用具有重要的意义.目前,在广泛采用的测量单层MoS_2反射谱的研究中,激子峰往往叠加在一个很强的光谱背底上,难以准确分辨激子的峰位和线宽.基于自行搭建的显微磁圆二向色谱系统,研究了单层MoS_2在65—300 K温度范围内的反射谱和磁圆二向色谱,结果表明磁圆二向色谱在研究单层材料激子能量和线宽方面具有明显的优势.通过分析变温的磁圆二向色谱,得到了不同温度下的A,B激子的跃迁能量和线宽.通过对激子能量和线宽的温度依赖关系进行拟合,进一步讨论了声子散射对激子线宽的影响.     

新型功能材料——声子晶体

声子晶体是20世纪90年代初提出的一种新型声学功能材料，这种周期性弹性结构具有许多重要性质，如声波带隙特性，即处于禁带频率范围内的振动或声波将被禁止在晶体中传播。通过求解声波在晶体中的运动方程可以设计一定的声子禁带和允带，而声子禁带与声波异质结构中声子的安德森局域化问题密切相关。文章重点阐述了声子晶体的主要特征、理论研究方法、潜在应用及前景展望。     

超高真空条件下分子束外延生长的单层二维原子晶体材料的研究进展

二维原子晶体材料具有与石墨烯相似的晶格结构和物理性质,为纳米尺度器件的科学研究提供了广阔的平台.研究这些二维原子晶体材料,一方面有望弥补石墨烯零能隙的不足;另一方面继续发掘它们的特殊性质,有望拓宽二维原子晶体材料的应用领域.本文综述了近几年在超高真空条件下利用分子束外延生长技术制备的各种类石墨烯单层二维原子晶体材料,其中包括单元素二维原子晶体材料(硅烯、锗烯、锡烯、硼烯、铪烯、磷烯、锑烯、铋烯)和双元素二维原子晶体材料(六方氮化硼、过渡金属二硫化物、硒化铜、碲化银等).通过扫描隧道显微镜、低能电子衍射等实验手段并结合第一性原理计算,对二维原子晶体材料的原子结构、能带结构、电学特性等方面进行了介绍.这些二维原子晶体材料所展现出的优异的物理特性,使其在未来电学器件方面具有广阔的应用前景.最后总结了单层二维原子晶体材料领域可能面临的问题,同时对二维原子晶体材料的研究方向进行了展望.     

一维颗粒声子晶体的拓扑相变及可调界面态

基于Su-Schrieffer-Heeger模型,构造了一种一维非线性声子晶体,通过调控外加在声子晶体上的预紧力,可调控声子晶体的拓扑态,从而实现拓扑相变.利用这一效应,把该非线性声子晶体与另一线性声子晶体形成异质结构,可以实现一种新型声学开关:通过调节预紧力即调控非线性声子晶体的拓扑相,可以实现异质结构中界面态从无到有的转变,从而实现了开关效应.利用该效应可望开发新型声学器件,如可调谐振器、可调滤波器、可调隔振器等.     

金衬底调控单层二硫化钼电子性能的第一性原理研究

基于密度泛函的第一性原理研究了金衬底对单层二硫化钼电子性能的调控作用. 从结合能、能带结构、电子态密度和差分电荷密度四个方面进行了深入研究. 结合能计算确定了硫原子层在界面的排布方式, 并指出这种吸附结构并不稳定. 能带结构分析证实了金衬底与单层二硫化钼形成肖特基接触, 并出现钉扎效应. 电子态密度分析表明金衬底并没有影响硫原子和钼原子之间的共价键, 而是通过调控单层二硫化钼的电子态密度增加其导电率. 差分电荷密度分析表明单层二硫化钼的导电通道可能在界面处产生. 研究结果可对单层二硫化钼晶体管的建模和实验制备提供指导.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.