Acyl- und Alkylidenphosphane. XII [1]. Synthese und Eigenschaften des 2,2-Dimethylpropionylphosphans und einiger Derivate

Acyl and alkylidene phosphines. XII. Syntheses and properties of 2,2-dimethylpropionylphosphine and of some derivatives At ?25°C bis(trimethylsilyl)phosphine 1b and 2,2-dimethylpropionyl chloride form (2,2-dimethylpropionyl)trimethylsilylphosphine 2b . As this compound is thermally more stable than similar acyltrimethylsilylphosphines, it might be treated at ?55°C with methyllithium to form the correspondig lithium phosphide 2d ; after the addition of chlorotrimethylsilane [2,2-dimethyl-1-(trimethylsiloxy)propylidene]-trimethylsilylphosphine 3c is obtained. At +20°C 2b rearranges to the E and Z isomer of [2,2-dimethyl-1-(trimethylsiloxy)propylidene]phosphine 3b . The NMR data of E- 3b and Z- 3b differ mostly in the coupling constants. Kept in the diffuse daylight for several days 3b dimerizes to form 2,4-di(tert.butyl)-2,4-bis(trimethylsiloxy)-1,3-diphosphetane 10 . In solution 10 is unstable and decomposes again to a mixture of the E und Z isomer of 3b . Reacting 3b or 3c with alcoholes all trimethylsilyl groups are replaced by hydrogen atoms and unstable 2,2-dimethylpropionylphosphane 4b is formed. Lithium(2,2-dimethylpropionyl)phosphide 4d , synthesized at ?60°C from 4b and methyllithium, crystallizes with one molecule 1,2-dimethoxyethane per formula unit and is dimeric in benzene. As shown by the NMR data 4d has the structure of an alkylidene-phosphine with the lithium atom bound to oxygen. At ?50°C 4d and chlorotrimethylsilane react to form 3b .     

1,2- and 1,3-diphosphetanes from alkylidenephosphines

Abstract

Alkyl- or arylbis(trimethylsilyl)phosphines as well as tris(trimethylsilyl)phosphine and the corresponding arsines react with acyl chlorides to give [1-(trimethylsiloxy)alkylidene]phosphines 1 and -arsines 2; most of their 2,2-dimethylpropylidene derivatives are thermally stable at room temperature. With the same class of phosphines as starting compounds and carbon disulfide [bis(trimethylsilylsulfano)methylidene]phosphines 3 are formed, whereas [(dialkylamino)methylidene]-4 and [diarylmethylidene]phosphines 5 or the corresponding arsines 6 and 7 can be obtained from acyl amides or ketones.¹     

Alkylidynephosphines - Syntheses and Reactivity

Abstract

In the past, different methods have been utilized for the preparation of alkylidynephosphines. Whereas, however, small amounts of thermally instable derivatives might be obtained from reactions in the gas phase, the synthesis of phosphines which are stable under an inert atmosphere, as for instance those with a tert-butyl or a 1-adamantyl substituent at the carbon atom of the PEC group, is best started with tris (trimethylsilyl) phosphine itself or with the more reactive lithium bis (trimethylsilyl) phosphide.2 tetrahydrofuran complex. Treatment of either compound with acyl halides results in the formation of acylbis (trimethylsilyl) phosphines which, at room temperature, rearrange to the corresponding trimethylsilyl [1-(trimethylsiloxy) alkylidene] isomers. As traces of hydrogen halide accelerate the conversion of tris (trimethylsilyl) phosphine to the triacyl derivatives, the use of the lithium phosphide is strongly recommended in all cases where impure acyl halides are used. In the presence of small amounts of solid sodium hydroxide suspended in an etherial solvent, the thus prepared trimethyl[1-(trimethylsiloxy)-alkylidene]phosphines eliminate hexamethyldisiloxane to yield the required alkylidyne compounds. Running the decomposition without a solvent at a higher temperature, Regitz and coworkers were able to improve this method further.     

Metallderivate von Molekülverbindungen. IV. Synthese,Struktur und Reaktivität des Lithium-[tris-(trimethylsilyl)silyl]tellanids · DME

Metal Derivatives of Molecular Compounds. IV Synthesis, Structure, and Reactivity of Lithium [Tris(trimethylsilyl)silyl]tellanide · DME Lithium tris(trimethylsilyl)silanide · 1,5 DME [3] and tellurium react in 1,2-dimethoxyethane to give colourless lithium [tris(trimethylsilyl)silyl]tellanide · DME ( 1 ). An X-ray structure determination {-150 · 3·C; P2₁/c; a = 1346.6(4); b = 1497.0(4); c = 1274.5(3) pm; β = 99.22(2)·; Z = 2 dimers; R = 0.030} shows the compound to be dimeric forming a planar Li? Te? Li? Te ring with two tris(trimethylsilyl)silyl substituents in a trans position. Three-coordinate tellurium is bound to the central silicon of the tris(trimethylsilyl)silyl group and to two lithium atoms; the two remaining sites of each four-coordinate lithium are occupied by the chelate ligand DME {Li? Te 278 and 284; Si? Te 250; Li? O 200 pm (2X); Te? Li? Te 105°; Li? Te? Li 75°; O? Li? O 84°}. The covalent radius of 154 pm as determined for the DME-complexed lithium in tellanide 1 is within the range of 155 ± 3 pm, also characteristic for similar compounds. In typical reactions of the tellanide 1 [tris(trimethylsilyl)silyl]tellane ( 2 ), methyl-[tris(trimethylsilyl)silyl]tellane ( 4 ) and bis[tris(trimethylsilyl)silyl]ditellane ( 5 ) are formed.     

Tris(trimethylsilyl)silylamin und seine lithiierten und silylierten Derivate — Kristallstruktur des dimeren Lithium-trimethylsilyl-[tris(trimethylsilyl)silyl]amids

Tris(trimethylsilyl)silylamine and the lithiated and silylated Derivatives — X-Ray Structure of the dimeric Lithium Trimethylsilyl-[tris(trimethylsilyl)silyl]amide The ammonolysis of the chlor, brom or trifluormethanesulfonyl tris(trimethylsilyl)silane yields the colorless tris(trimethylsilyl)silylamine, destillable at 51°C and 0.02 Torr. The subsequent lithiation, reaction with chlor trimethylsilane and repeated lithiation lead to the formation of lithium tris(trimethylsilyl)silylamide, trimethylsilyl-[tris(trimethylsilyl)silyl]amine and finally lithium trimethylsilyl-[tris(trimethylsilyl)silyl]amide, which crystallizes in the monoclinic space group P2₁/n with a = 1 386.7(2); b = 2 040.2(3); c = 1 609.6(2) pm; β = 96.95(1)° and Z = 4 dimeric molecules. The cyclic Li₂N₂ moiety with Li? N bond distances displays a short transannular Li …? Li contact of 229 pm. The dimeric molecule shows nearly C₂-symmetry, so that one lithium atom forms agostic bonds to both the trimethylsilyl groups, the other one to the tris(trimethylsilyl)silyl substituents. However, the ⁷Li{¹H}-NMR spectrum displays a high field shifted singlet at —1.71 ppm. The lithiation of trimethylsilyl-[tris(trimethylsilyl)silyl]amine leads to a high field shift of the ²⁹Si{¹H} resonance of about 12 ppm for the Me₃SiN group, whereas the parameters of the tris(trimethylsilyl)silyl ligand remain nearly unaffected.     

Bildung und Eigenschaften von Acylphosphinen. II. Verbindungen aus der Reaktion von Tris(trimethylsilyl)phosphin mit Pivaloylchlorid

Syntheses and Properties of Acylphosphines. II. Compounds from the Reaction of Tris(trimethylsilyl)phosphine with Pivaloyl Chloride Tris(trimethylsilyl)phosphine reacts with pivaloyl chloride at +20°C in cyclopentane to form the enol form of pivaloylbis(trimethylsilyl)phosphine. In this compound one trimethylsilyl group is bound to phosphorus, the other to oxygen. As the n.m.r. spectra of the reaction at ?10°C in monoglyme show the thermally instable keto form with two trimethylsilyl groups bound to phosphorus is formed first and rearranges at slightly elevated temperatures. Substitution of the second trimethylsilyl group yields the enol form of dipivaloyltrimethylsilylphosphine. Tripivaloylphosphine with three acyl groups bound to phosphorus and the enol form of tert. butylpivaloyltrimethyl-silylphosphine are produced in side reactions.     

Bis(trimethylsilyl)amide und -methanide des Yttriums — Molekülstrukturen von Tris(diethylether-O)lithium-(μ-chloro)-tris[bis(trimethylsilyl) methyl]yttriat,solvensfreiem Yttrium-tris[bis(trimethylsilyl)amid] sowie dem Bis(benzonitril)-Komplex

Bis(trimethylsilyl)amides and -methanides of Yttrium — Molecular Structures of Tris(diethylether-O)lithium-(μ-chloro)-tris[bis(trimethylsilyl)methyl]yttriate, solvent-free Yttrium Tris[bis(trimethylsilyl)amide] as well as the Bis(benzonitrile) Complex The reaction of yttrium(III) chloride with the three-fold molar amount of LiE(SiMe₃)₂ (E = N, CH) yields the corresponding yttrium derivatives. Yttrium tris-[bis(trimethylsilyl)amide] crystallizes in the space group P3 1c with a = 1 636,3(2), c = 849,3(2) pm, Z = 2. The yttrium atom is surrounded trigonal pyramidal by three nitrogen atoms with Y? N-bond lengths of 222 pm. Benzene molecules are incorporated parallel to the c-axes. The compound with E = CH crystallizes as a (Et₂O)₃LiCl-adduct in the monoclinic space group P2₁/n with a = 1 111,8(2), b = 1 865,2(6), c = 2 598,3(9) pm, β = 97,41(3)° and Z = 4. The reaction of yttrium tris[bis(trimethylsilyl)amide] with benzonitrile yields the bis(benzonitrile) complex, which crystallizes in the triclinic space group P1 with a = 1 173,7(2), b = 1 210,3(2), c = 1 912,4(3) pm, α = 94,37(1), β = 103,39(1), γ = 117,24(1)° and Z = 2. The amido ligands are in equatorial, the benzonitrile molecules in axial positions.     

Bis[N-(trimethylsilyl)iminobenzoyl]phosphanide des Lithiums und Zinks – Synthese sowie NMR-spektroskopische,strukturelle und quantenchemische Untersuchungen

Acyl- and Alkylidenephosphanes. XXXV. Bis[ N -(trimethylsilyl)iminobenzoyl]phosphanides of Lithium and Zinc – Syntheses as well as NMR Spectroscopic, Structural, and Quantumchemical Studies From the reaction of bis(tetrahydrofuran)lithium bis(trimethylsilyl)phosphanide with two equivalents of benzonitrile in 1,2-dimethoxyethane, the yellow dme complex ( 2 a ) of lithium bis[N-(trimethylsilyl)iminobenzoyl]phosphanide ( 2 ) was obtained in 69% yield. However, the intermediate {1-[N-lithium-N-(trimethylsilyl)amido]benzylidene}trimethylsilylphosphane ( 1 ), formed by an analogous 1 : 1 addition in diethyl ether, turned out to be unstable and as a consequence could be characterized by nmr spectroscopic methods only; attempts to isolate the compound failed, but small amounts of the neutral complex 2 b , with the ligands benzonitrile and tetrahydrofuran coordinated to lithium, precipitated. The reaction of compound 2 with zinc(II) chloride in diethyl ether gives the orange-red spiro-complex zinc bis{bis[N-(trimethylsilyl)iminobenzoyl]phosphanide} ( 3 ); this complex is also formed from bis[N-(trimethylsilyl)iminobenzoyl]phosphane ( 4 ), easily amenable by a lithium hydrogen exchange of 2 a with trifluoroacetic acid [18], and zinc bis[bis(trimethylsilyl)amide]. As derived from nmr spectroscopic studies and x-ray structure determinations, compounds 2 a {δ³¹P +63.3 ppm; P2₁/n; Z = 4; R₁ = 0.067}, 2 b {δ³¹P +63.3 ppm; P2₁/c; Z = 4; R₁ = 0.063}, 3 {δ³¹P +58.2 ppm; C2/c; Z = 4; R₁ = 0.037} and 4 {δ³¹P +58.1 ppm [18]} exist as cyclic 3-imino-2λ³σ²-phosphapropenylamides and -propenylamine, respectively, in solution as well as in the solid state. Unlike hydrogen derivative 4 the bis[N-(trimethylsilyl)iminobenzoyl]phosphanide fragments N,N′-coordinating either a lithium or a zinc cation are characterized by almost completely equalized bond lengths; typical mean distances and angles are: PC 180.3 and 178.7; CN 130.5 and 131.8; N–Si 175.3 and 179.3; N–Li 202.3; N–Zn 203.5 pm; CPC 108.8° and 110.5°; PCN 130.9° and 132.9°; CN–Li 113.0°, CN–Zn 117.4°; N–Li–N 104.6°; N–Zn–N 108.8°. Alterations in the shape of the six membered chelate rings, caused by an exchange of the 3-imino-2λ³σ²-phosphapropenylamide or related 2λ³σ²-phospha-1,3-dionate units for the corresponding phosphorus free ligands, are discussed in detail. The results of quantumchemical DFT-B3LYP calculations coincide very well with the experimentally obtained findings.     

Acyl- und Alkylidenphosphane. XVIII. Monoacetyl- und Diacetylphosphan

Acyl- and Alkylidenephosphines. XVIII. Monoacetyl- and Diacetylphosphine When triacetylphosphine 3a is treated with methanol 4 or benzyl alcohol 6 P? C(O) bonds are cleaved and a mixture of diacetyl- 2a and monoacetylphosphine 1a is formed. The thermally labile phosphine 1a decomposes completely within a few hours at +20°C; but 2a also reacts slowly within days to give triacetylphosphine 3a and further unknown compounds. As it is found by nmr-spectroscopic studies the acidic hydrogen atoms of monoacetylphosphine 1a are both bound to phosphorus. In liquid diacetylphosphine 2a or in solutions of this compound, However, there exists an equilibrium between the keto tautomer K- 2a with a PH and the enol tautomer E- 2a with an O? H? O group; compared with pentane-2,4-dione 8a the keto tautomerpredo minates in 2a . As in 1,3-diketones a low temperature and a small dielectric constant of the solvent increase the amount of enol tautomer E- 2a present. The ¹H-nmr resonance of the enolic hydrogen atom is observed at very low field (δ = 18,3 ppm).     

Umsilylierungsreaktionen mit Di-tert-butyl(trimethylsilyl)phosphin

Transsilylation Reaction with Di-tert-butyl(trimethylsilyl)phosphine Di-tert-butyl(trimethylsilyl)phosphine reacts with Dichlordimethylsilane, Trichlor(methyl)silane and silicon tetrachloride with elimination of Chlortrimethylsilane and formation of the new Silylphosphines [( CH₃)₃C]₂PSi(CH₃)_3?nCl_n (n = 1, 2, 3). Only the compounds with n = 2 and 3 can be isolated in a pure state. The ir, raman, ¹H-n.m.r. and ³¹P-n.m.r. spectroscopic data of the new compounds are discussed.     

Reaction of bis(trimethylsiloxy)phosphine with trimethylsilane

Bis(trimethylsilyl) [3-(trimethylsilyl)propyl]phosphonate and trimethylsilyl [3-(trimethylsilyl)propyl]-phosphinate are obtained by the reaction of bis(trimethylsiloxy)phosphine with trimethylallylsilane and converted into [3-(trimethylsilyl)propyl]phosphinic and [3-(trimethylsilyl)propyl]phosphonic acid, respectively, by the reaction with methanol.     

Facile synthesis of luminescent benzo-1,2-dihydrophosphinines from a phosphaalkene

The addition of 4-trifluoromethyl-1-ethynylbenzene, phenylacetylene, or 4-ethynylanisole to P-mesityldiphenylmethylenephosphine, 1, produced photoluminescent 1,2-dihydrophosphinines 4a-c, respectively, in quantitative yield via a [4 + 2] cycloaddition. Limited reactivity was observed between 1 and non-aromatic alkynes. P-[Bis(trimethylsilyl)amino][(trimethylsilyl)methylene]phosphine, 2, and P-mesityl[(t-butyl)(trimethylsiloxy)methylene]phosphine, 3, showed extremely limited reactivity with all alkynes examined. The reactivity of phosphaalkenes toward terminal alkynes is compared to that of alkenes as well as silenes and germenes.     

Synthese und Struktur von Lithium-tris(trimethylsilyl)silanid · 1,5 DME

Synthesis and Structure of Lithium Tris(trimethylsilyl)silanide · 1,5 DME Lithium tris(trimethylsilyl)silanide · 1,5 DME 2a synthesized from tetrakis(trimethylsilyl)silane 1 [6] and methyllithium in 1,2-dimethoxyethane , crystallizes in the monoclinic space group P2₁/c with following dimensions of the unit cell determined at a temperature of measurement of ?120 ± 2°C: a = 1 072.9(3); b = 1 408.3(4); c = 1 775.1(5) pm; β = 107.74(2)°; 4 formula units (Z = 2). An X-ray structure determination (R_w = 0.040) shows the compound to be built up from two [lithium tris(trimethylsilyl)silanide] moieties which are connected via a bridging DME molecule. Two remaining sites of each four-coordinate lithium atom are occupied by a chelating DME ligand. The Li? Si distance of 263 pm is considerably longer than the sum of covalent radii; further characteristic mean bond lengths and angles are: Si? Si 234, Li? O 200, O? C 144, O?O (biß) 264 pm; Si? Si? Si 104°, Li? Si? Si 107° to 126°; O? Li? O (inside the chelate ring) 83°. Unfortunately, di(tert-butyl)bis(trimethylsilyl)silane 17 prepared from di(tert-butyl)dichlorsilane 15 , chlorotrimethylsilane and lithium, does not react with alkyllithium compounds to give the analogous silanide.     

Acyl- und Alkylidenphosphane. XXVII [I.]. Molekül- und Kristallstruktur des Methyl[(N-phenyl,N-tri-methylsilyl)thiocarbamoyl]trimethylsilylphosphans

Acyl- and Alkylidenephosphines. XXVII. Molecular and Crystal Structure of Methyl-[(N-phenyl, N-trimethylsilyl)thiocarbamoyl]trimethylsilylphosphine . Methyl[(N-phenyl, N-trimethylsilyl)thiocarbamoyl]trimethylsilylphosphine 1a formed via an addition of methylbis(trimethylsilyl)phosphine to phenyl isothiocyanate [1], crystallizes in the monoclinic centrosymmetric space group P2₁/n with following dimensions of the unit cell determined at a temperature of measurement of ?80±3°C: a=1041.2(4);b=1706.9(12);c=1001.1(6)pm; β=106.41(4)°; Z = 4. An X-ray structure determination (R_w = 0.039) confirms the constitution of the compound as already derived from its nmr spectra. One trimethylsilyl group is bound to the phosphorus atom, whereas the other is connected with the sp²-hybridized nitrogen atom. Characteristic rounded bond lenghts and angles are: P? Si 231, P? CH₃ 184, P? C(S) 187, C?S 167, N? C(S) 137, and N? Si 181 pm as well as P? C? S 122°, P? C? N 117°, and S? C? N 121°.     

Synthese,Eigenschaften und Struktur von Amin-Addukten der Lithium-tris[bis(trimethylsilyl)methyl]zinkate

Synthesis, Properties, and Structure of the Amine Adducts of Lithium Tris[bis(trimethylsilyl)methyl]zincates . Bis[bis(trimethylsilyl)methyl]zinc and the aliphatic amine 1,3,5-trimethyl-1,3,5-triazinane (tmta) yield in n-pentane the 1:1 adduct, the tmta molecule bonds as an unidentate ligand to the zinc atom. Bis[bis(trimethylsilyl)methyl]zinc · tmta crystallizes in the triclinic space group P1 with {a = 897.7(3); b = 1 114.4(4); c = 1 627.6(6) pm; α = 90.52(1); β = 103.26(1); γ = 102.09(1)°; Z = 2}. The central C₂ZnN moiety displays a nearly T-shaped configuration with a CZnC angle of 157° and Zn? C bond lengths of 199 pm. The Zn? N distances of 239 pm are remarkably long and resemble the loose coordination of this amine; a nearly complete dissociation of this complex is also observed in benzene. The addition of aliphatic amines such as tmta or tmeda to an equimolar etheral solution of lithium bis(trimethylsilyl)methanide and bis[bis(trimethylsilyl)methyl]zinc leads to the formation of the amine adducts of lithium tris[bis(trimethylsilyl)methyl]zincate. Lithium tris[bis(trimethylsilyl)methyl]zincate · tmeda · 2 Et₂O crystallizes in the orthorhombic space group Pbca with {a = 1 920.2(4); b = 2 243.7(5); c = 2 390.9(5) pm; Z = 8}. In the solid state solvent separated ions are observed; the lithium cation is distorted tetrahedrally surrounded by the two nitrogen atoms of the tmeda ligand and the oxygen atoms of both the diethylether molecules. The zinc atom is trigonal planar coordinated; the long Zn? C bonds with a value of 209 pm can be attributed to the steric and electrostatic repulsion of the three carbanionic bis(trimethylsilyl)methyl substituents.     

Tris[bis(trimethysilyl)amido]zinkate von Lithium und Calcium

Tris[bis(trimethylsilyl)amido]zincates of Lithium and Calcium Calcium-bis[bis(trimethylsilyl)amide] and Bis[bis(trimethylsilyl)amido]zinc yield in 1,2-dimethoxyethane quantitatively Calcium-bis{tris[bis(trimethylsilyl)- amido]zincate} · 3DME. When THF is chosen as a solvent, the two reactants and the zincate form a temperature-independent equilibrium, whereas in benzene no reaction occurs. The tris[bis(trimethylsilyl)amido]zincate anion displays characteristic ¹³C{¹H) and ²⁹Si{¹H] chemical shifts of 7 and ?8 ppm, respectively; the nature of the solvent, the cation and the complexating ligands don't influence the IR nor NMR data of the zincate anion and thus verify that [Ca(DME)₃]²⁺ and {Zn[N(SiMe_{3 2}]₃}^? appear as solvent separated ions, which is also confirmed by their insolubility in hydrocarbons.     

Acyl- und Alkylidenphosphane. XIII [1]. Molekül- und Kristallstruktur des 2,4-Di(tert.butyl)-2,4-bis-(trimethylsiloxy)-1,3-diphosphetans

Das Gemisch aus dem E- und Z-Isomeren des [2,2-Dimethyl-1-(trimethylsiloxy)propyliden]phosphans ist bei 20°C im diffusen Tageslicht nicht beständig; im Laufe einiger Wochen scheidet sich das Dimere 2,4-Di(tert.butyl)-2,4-bis(trimethylsiloxy)-1,3-diphosphetan 1 ab. Die Verbindung kristallisiert triklin in der Raumgruppe P1 mit a = 1044,5(3); b = 647,8(2); c = 883,8(2) pm; α = 100,39(2); β = 102,84(2); γ = 93,70(2)°; Z = 1. Wie die Röntgenstrukturanalyse (R = 3,7%) zeigt, besitzt das Molekül als kristallographisches Symmetrieelement ein Inversionszentrum. Die mit 190,3 und 189,5 pm langen P? C? Abstände weisen auf eine beträchtliche Ringspannung hin; in Lösung zerfällt das Diphosphetan wieder leicht in das E- und Z-isomere Monomere. Weitere charakteristische Bindungsabstände und -winkel sind: C1? O 140,8; Si? O 163,5 pm sowie P? C1? P' 92,7; C1? P? C1′ 87,3; C1? O? Si 146,2° Acyl and Alkylidene Phosphines. XIII. Molecular and Crystal Structure of 2,4-Di(tert.-butyl)-2,4-bis(trimethylsiloxy)-1,3-diphosphetane Kept at 20°C in diffuse daylight the mixture of the E and Z isomer of [2,2-dimethyl-1-(trimethylsiloxy)propylidene]phosphine is not stable; within several weeks the dimer 2,4-di(tert.-butyl)-2,4-bis(trimethylsiloxy)-1,3-diphosphetane 1 precipitates. The compound crystallizes triclinic in the space group P1 with a = 1044.5(3); b = 647.8(2); c = 883.8(2) pm; α = 100.39(2); β = 102.84(2); γ = 93.70(2)°; Z = 1. As shown by an x-ray structure determination (R = 3.7%) the molecule has a centre of symmetry. The long P? C distances (189.5 and 190.3 pm) indicate a strained ring-system; in solution the diphosphetane decomposes again to form the E and Z isomeric monomer. Further characteristic bond distances and angles are: C1? O 140.8; Si? O 163.5 pm as well as P? C1? P' 92.7; C1? P? C1′ 87.3; C1? O? Si 146.2°.     

(O,O′)-Diorganodithiophosphatophenyltellur(II)- und Tris[(O,O′)-diorganodithiophosphato]phenyltellur(IV)-Verbindungen; Kristallstruktur von Tris[(O,O′)-diphenyldithiophosphato]phenyltellur(IV)

(O,O′)-Diorganodithiophosphatophenyltellurium(II)- and Tris[(O,O′)-diorganodithiophosphato]phenyltellurium(IV) Compounds; Crystal Structure of Tris[(O,O′)-diphenyldithiophosphato]phenyltellur(IV) The title compounds are available by reaction of trichlorophenyltellurium(IV) respectively iodophenyltellurium(II) with the sodium or ammonium salts of (O,O′)-diorganodithiophosphorus acids in various solvents. The resulting tellurium(IV) compounds have a pronounced tendency towards reductive elimination of bis[(O,O′)-diorganothiophosphoryl]disulfanes [S₂P(OR)₂]₂ in solution. In contrast, the tellurium(II) compounds are stable, although they are disintegrated to diphenylditellane and [S₂P(OR)₂]₂ on prolonged standing in chlorinated hydrocarbons. Crystals of tris[(O,O′)-diphenyldithiophosphato]phenyltellurium(IV) are monoclinic (space group P2₁/c) with the cell constants: a = 1 039.2(1), b = 1 037.9(3), c = 4 205.0(1) pm, β = 95.273(1)°, V = 4 516.42(9)X10⁶ pm³, Z = 4. The compound appears to be monomeric in the solid state forming a distorted pentagonal bipyramid. The stereochemical influence of the lone pair of electrons causes the axial (i. e. C1? Te? S4) angle to be 156.6(1)° rather than the theoretical 180°.     

Cycloadditionsreaktionen von Isocyaniden an Bis[tris(trimethylsilyl)methyl]diphosphen

Cycloaddition Reactions of Isocyanides with Bis[tris(trimethylsilyl)methyl]diphosphene The [2 + 1] cycloaddition reactions of isocyanoacetonitrile ( 1 a ), pentacarbonyl(diisocyanomethane)chromium ( 1 b ), and 2,2,2-trifluoroethylisocyanide ( 1 c ) with the diphosphene R–P=P–R (R = C[Si(CH₃)₃]) ( 2 ) yield the expected diphosphirane imines 3 a – c . All compounds are thermally very stable and show no evidence for a [2 + 1] cycloreversion reaction. The structures of 3 a : triclinic, P 1, a = 918.0(2), b = 1174.7(4), c = 1821.9(5) pm, α = 93.83(2), β = 97.22(2)°, γ = 97.08(2)°, Z = 2, R₁ = 0.069; 3 c : monoclinic, P2₁, a = 928.6(2), b = 1659.8(3), c = 1261.2(3) pm, β = 107.65(2)°, Z = 2, R₁ = 0.073, and 1,2-Bis[tris(trimethylsilyl)]methyl-N-trifluormethyl-3-diphosphiranimin: monoclinic, P2₁/n, a = 1374.6(3), b = 1685.9(1), c = 1658.6(5) pm, β = 108.99(9)°, Z = 4, R₁ = 0.092, were elucidated by X-ray crystallography. All three compounds possess a similar three membered PCP ring system with an exocyclic C–N double bond.     

(E)-[4,4,4-Trifluor-1-(trifluormethyl)-1,3-bis(trimethylsiloxy)-2-butenyl]diphenylphosphin als Ligand

The Ligand (E)-[4,4,4-Trifluoro-1-(trifluoromethyl)-1,3-bis(trimethylsiloxy)-2-butenyl]di-phenylphosphine The tertiary phosphine (E)-Ph₂PC(OSiMe₃)(CF₃)CH = C(OSiMe₃)CF₃ (L), 1 and the carbonyl Fe₂(CO)₉ react to give (OC)₄FeL, 2. Bis( 1,1,1,5,5,5-hexafluoropentane-2,4-dionato)palladium(II) and 1 furnish the diphenylphosphido group bridged palladium(II) complex 3 crystallizing from chloroform triclinic in the space group P1 with a = 12.600(3), b = 13.298(3), c = 13.975(3) Å, α = 93.27(2), β = 111.67(2), γ = 106.71(2)° The elementary cell contains Z = 2 formular units and two molecules CHCl₃ with two independent molecules 3 each showing an inversion centre. The planar [PdP], four membered ring system and the planar chelate units, exhibit a torsional angle of 6.75°