Electrosynthesis of pyrazole-4-carboxylic acids by oxidation of 4-formylpyrazoles on NiO(OH)-electrode in aqueous alkaline solution

Electrochemical oxidation of di- and trisubstituted 4-formylpyrazoles on a Ni-anode in aqueous alkali led to the formation of the corresponding pyrazole-4-carboxylic acid in 60–90% yields. The yields of the target products depend on position of substituent in the pyrazole ring and are decreased in the following sequence of substituent at position 1 Me > Et > Ph, as well as when the aqueous medium was replaced with aqueous alcohol (50% Bu^tOH). Oxidation of 4-formylpyrazoles containing Me groups at the carbon atoms of the pyrazole ring led, to monoacids and also pyrazoledicarboxylic acids in small (1.5–14%) amounts; the latter were the oxidation products of the aldehyde and the Me groups.     

Direct iodination of indanone and tetralone derivatives by elemental iodine activated by Selectfluor™ F-TEDA-BF4

Derivatives of indan-1-one and 3,4-dihydronaphthalen-1(2H)-one bearing hydroxy or methoxy substituent on the aromatic ring were efficiently iodinated regioselectively at the α carbonyl position using elemental iodine activated by 1-chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (Selectfluor™ F-TEDA-BF₄) in methanol.     

Diastereoselective preparation of 2,4,6-trisubstituted-2'-cyanopiperidines: application to the construction of the carbon framework of perhydrohistrionicotoxin

The anodic cyanation of methanolic solutions of the 2-alkyl-N-phenylpiperidines 6b-d was performed in a flow cell equipped with a graphite felt anode. The reaction led to the formation of the 2-cyano-6-alkyl-N-phenylpiperidines 2b-d and proceeded with a high degree of regioselectivity. The 1H NMR spectra of the aminonitriles 2b-d showed an epimeric mixture at C-6. The major isomer has a trans configuration in which the cyano group is axial and the alkyl substituent is equatorial. Conversely, electrochemical oxidation of the 4-methyl-6-pentyl-N-phenylpiperidine 6e afforded the trisubstituted aminonitrile 2e as a single diastereomer (> 98% de). The 4-cyanobutyl side chain was incorporated in a two-step procedure to yield dinitrile 4e. This latter compound was directly converted into spiropiperidine 5e by using the Thorpe-Ziegler annulation procedure. The overall sequence (4 steps, 43%) allows the construction of the basic carbon framework of perhydrohistrionicotoxin.     

Stereoselective synthesis of 5-7 membered cyclic ethers by deiodonative ring-enlargement using hypervalent iodine reagents

Stereoselective synthesis of 5-7 membered cyclic ethers was achieved by deiodonative ring-enlargement of cyclic ethers having an iodoalkyl substituent. The reaction took place readily under mild conditions using hypervalent iodine compounds and an acetoxy or a trifluoroacetoxy group was introduced into the rings depending on the hypervalent iodine reagent employed. The use of hexafluoroisopropanol (HFIP) as solvent is critical.     

Intramolecular 1,5- versus 1,6-hydrogen abstraction reaction promoted by alkoxy radicals in carbohydrate models

[reaction: see text] The alkoxy radical generated by reaction of 3,7-anhydro-2-deoxyoctitols with (diacetoxyiodo)benzene (DIB) and iodine abstracts regioselectively either the proton at C7 or that at C4 depending on the electronegativity of the substituent at C4. The correct election of this substituent can switch the reaction to give 2,9-dioxabicyclo[3.3.1]nonane or hexahydro-2H-furo[3,2-b]pyran ring systems.     

Influence of the aryl substituent identity in 4-arylamino-3-nitrocoumarins on their thermal behavior

Thermal behavior of structurally similar 4-arylamino-3-nitrocoumarin derivatives substituted with different electron-donor and electron-acceptor substituents on the aryl side group was investigated. The thermal stability of these compounds was studied by non-isothermal thermo-gravimetric analysis, differential thermo-gravimetry, differential thermal analysis, and pyrolysis–gas chromatography–mass spectrometry. The thermal degradation of the three synthesized 4-arylamino-3-nitrocoumarins, possessing an iodine atom, a nitro or a methyl group, proceeds in three steps. The thermal stability of the coumarin derivative with the electron-donating methyl substituent is lower than that of the compounds with the electron-accepting nitro group or iodine atom. This least stable compound (4-[(4-methylphenyl)amino]-3-nitro-2H-chromen-2-one) was also characterized with the greatest loss in mass that accompanied the degradation, and all of the three degradation steps of this compound began at the lowest temperature in comparison to the other two.     

New description of the substituent effect on electronic spectra by means of substituent constants—VI. Utraviolet spectra of 4-substituted pyridine N-oxides and blue shifted iodine bands of their EDA complexes with iodine

Electronic spectra of 4-substituted pyridine N-oxides and their EDA complexes with iodine were studied. The substituent effect on the near u.v.¹A₁ intramolecular CT bands of the N-oxides and on the blue shifted iodine bands caused by CT complex formation are discussed in terms of a general equation, theoretically derived in order to describe the substituent effect on electronic spectra by means of substituent constants. The results are quite successful and supported by semi-empirical SCFMO-CI calculations. Based on the results mentioned above, the character of n-σ type N-oxide—iodine CT complexes is also examined. The complex formation constants (log K) and pK_a values of the N-oxides correlate especially well, indicating that the CT interaction mechanism cannot be neglected in proton addition reactions such as hydrogen bonding and pK_a values.     

Concise total synthesis of the thiazolyl peptide antibiotic GE2270 A

The potent antibiotic thiazolylpeptide GE2270 A was synthesized starting from N-tert-butyloxycarbonyl protected valine in a longest linear sequence of 20 steps and with an overall yield of 4.8 %. Key strategy was the assembly of the 2,3,6-trisubstituted pyridine core by consecutive cross-coupling reactions starting from 2,6-dibromo-3-iodopyridine. The complete Southern fragment was installed by Negishi cross-coupling of 3-zincated 2,6-dibromopyridine at the terminal 2-iodothiazole of a trithiazole (87 %). The substituent at C-6 representing the Northern part of the molecule was introduced in form of the truncated tert-butyl 2-bromothiazole-4-carboxylate after metalation to a zinc reagent by another Negishi cross-coupling (48 %). Decisive step of the whole sequence was the macrocyclization to a 29-membered macrolactam, which was conducted as an intramolecular Stille cross-coupling occurring at C-2 of the pyridine core and providing the desired product in 75 % yield. The required stannane was obtained by amide bond formation (87 %) between a complex dithiazole fragment representing the Eastern part of GE2270 A and a 3,6-disubstituted 2-bromopyridine. Final steps included attachment of a serine-proline amide dipeptide to the Northern part of the molecule (65 %), formation of the oxazoline ring and silyl ether deprotection (55 % overall).     

Step-economic synthesis of (±)-debromoflustramine A using indole C3 activation strategy

A concise and practical strategy to obtain C3 reverse-prenylated pyrrolidinoindoline scaffold has been executed in 28.8% overall yield. The key conjugative step involved a Booker-Milburn-Feudoloff reaction involving an NCS-mediated activation of indole, followed by coupling to C₅ dimethylallylalcohol. This linchpin step proceeded in 74% yield. The overall sequence proceeded in five steps from commercially available N-methyltryptamine with a single protection-deprotection operation and a single redox manipulation. Mechanistic insights of NCS activation, and an ensuing rearrangement of the isoprene unit were gained by rationally varying the C3 substituent.     

Simultaneous preparation of four truncated analogues of discodermolide by fluorous mixture synthesis

[structure: see text] Four truncated analogues of the natural product discodermolide were synthesized in a single synthetic sequence. Precursors bearing four different groups at C22, each with a unique fluorous p-methoxybenzyl substituent on the C17 hydroxy group, were mixed and taken through an nine-step sequence. Demixing by fluorous chromatography followed by deprotection and purification provided the individual analogues in 3-7% overall yields and with a savings of 24 synthetic steps. Fluorous mixture synthesis is recommended as a new technique to make multiple natural product analogues in a single multistep synthesis.     

Spectrophotometric studies of CT complexes of poly(N-vinylhalogenocarbazole)s with 2,4,7-trinitrofluorenone

The effect of chlorine, bromine, and iodine at the 3 and 3,6 positions on a carbazole ring with thermodynamic properties, that is, enthalpy, entropy, and a stability constant of CT complex poly(N-vinylcarbazole–2,4,7-trinitrofluorenone), were studied in a temperature range of 268–323 K. The discussion of the results obtained, based on linear free-energy relationships, stressed the advantageous influence of the halogen substituent in the carbazole ring on the properties of the poly(N-vinylcarbazole)–2,4,7-trinitrofluorenone complex.     

Tandem Catalytic C(sp3)?H Amination/Sila‐Sonogashira–Hagihara Coupling Reactions with Iodine Reagents

A new tandem C N and C C bond‐forming reaction has been achieved through Rh^II/Pd⁰ catalysis. The sequence first involves an iodine(III) oxidant, then the in situ generated iodine(I) by‐product is used as a coupling partner. The overall process demonstrates the synthetic value of iodoarenes produced in trivalent iodine reagent mediated oxidations.     

Tandem Catalytic C(sp3)H Amination/Sila‐Sonogashira–Hagihara Coupling Reactions with Iodine Reagents

A new tandem C? N and C? C bond‐forming reaction has been achieved through Rh^II/Pd⁰ catalysis. The sequence first involves an iodine(III) oxidant, then the in situ generated iodine(I) by‐product is used as a coupling partner. The overall process demonstrates the synthetic value of iodoarenes produced in trivalent iodine reagent mediated oxidations.     

A Quantitative Structure–Reactivity Assessment of Phenols by Investigation of Rapid Iodination Kinetics Using Hydrodynamic Voltammetry: Applicability of the Hammett Equation in Aqueous Medium

Halogenations of aromatic substrates in aqueous medium are essentially electrophilic substitutions proceeding at rates concomitant with the nature of the substrates and substituent motifs. Kinetics as an investigatory tool for the quantitative assessment of the structure–reactivity correlation in these reactions for a diverse range of substrates has rarely been reported, presumably due to the rapidity of these reactions in aqueous medium. We have used hydrodynamic voltammetry to investigate the rapid kinetics of uncatalyzed iodination of phenol and eight substituted phenols by iodine monochloride at constant pH in aqueous medium. The Arrhenius plots for these reactions yield comprehensive kinetic and thermodynamic data. The quantitative structure–reactivity correlation stemming from the regio‐ and stereospecificity of the substituent motifs on the substrates has been examined through the Hammett plot, which shows a negative slope of 1.87. The magnitudes of the rate constants, energies of activation, frequency factors, and entropy change obtained for the nine fast reactions reported, reflect the relative ease of the reaction dynamics in quantitative terms thereby ascertaining the relative reactivities of the phenols studied herein.     

Green Polymer Chemistry VIII: Synthesis of Halo‐ester‐Functionalized Poly(ethylene glycol)s via Enzymatic Catalysis

Halo‐ester‐functionalized poly(ethylene glycol)s (PEGs) are successfully prepared by the transesterification of alkyl halo‐esters with PEGs using Candida antarctica lipase B (CALB) as a biocatalyst under the solventless conditions. Transesterifications of chlorine, bromine, and iodine esters with tetraethylene glycol monobenzyl ether (BzTEG) are quantitative in less than 2.5 h. The transesterification of halo‐esters with PEGs are complete in 4 h. ¹H and ¹³C NMR spectroscopy with MALDI‐ToF and ESI mass spectrometry confirm the structure and purity of the products. This method provides a convenient and “green” process to effectively produce halo‐ester PEGs.

     

Design,Synthesis and Late-Stage Modification of Indane-Based Peptides via [2+2+2] Cyclotrimerization

Here, we prepared several dipeptides containing 2-aminoindane-2-carboxylic acid (Aic) and carried out further synthetic transformations. Synthesis and purification of modified peptides by using [2+2+2] cyclotrimerization is a challenging task. We are able to modify the unusual amino acids and peptide derivatives by late-stage incorporation of benzylhalo functionality. To incorporate benzylhalo moiety we used [2+2+2] cyclotrimerization in the presence of Mo(CO)₆. These halo derivatives are potential substrates for further modification by Sonogashira reaction, Suzuki–Miyaura cross-coupling, sultine formation, and the Diels–Alder reaction sequence.     

唑烷环-Schiff碱互变异构中取代基效应和溶剂效应的NMR研究

合成了十个对位和间位取代的2-苯基-4,4-二基 唑烷, 并用NMR研究了它们在氯仿、丙酮和二甲基亚砜中与相应的Schiff碱之间的互变异构平衡。发现在平衡常数K与取代基常数σ^+之间存在着良好的线性自由能关系, 说明平衡可能经历了带有正电荷的中间体。在2-位质子的化学位移δ与取代基常数σ间也存在着线性关系。logK/K0-σ^+和δ-σ直线的斜率都与溶剂的极性有关。     

Determination of total iodine in infant formula and nutritional products by inductively coupled plasma/mass spectrometry: single-laboratory validation

A single-laboratory validation by inductively coupled plasma-mass spectrometry was developed for the determination total iodine (m/z 127) in infant formula and adult nutritional products. All samples were digested in nitric acid using a closed vessel microwave oven system; Te (m/z 130) was used as an internal standard. To prevent loss of iodine, ammonium hydroxide solution was added to the samples immediately after digestion. The method quantitation limit for total iodine was 0.3 ng/mL, but a practical LOQ was used at 1.0 ng/mL, a concentration at which there was a negligible bias due to nonlinearity. The total iodine concentrations (112-1900 ng/g) in 14 out of 15 nutritional products were within specification limits. Within-day and day-to-day (6 independent days) precision values were < 10% RSD. The observed precision for the overall mean (18 independent days) of a control sample was approximately 4% RSD. In two National Institute of Standards and Technology standard reference materials, total iodine results were within certified limits. Sample spike recoveries for all 15 nutritional products were 92-105%. The data show that a conventional microwave oven digestion procedure can be used to prepare samples for iodine determination. Therefore, this technique is very compatible with other methods being proposed as modern official methods for the analysis of minerals in nutritional products.     

Biosynthesis of Bromoroquefortines in a High Saline Medium by Penicillium chrysogenum,a Terrestrial Endophyte Collected from Coffea arabica

Roquefortine C ( 1 ) and 11‐bromoroquefortine C ( 4 ) were isolated from Penicillium chrysogenum, an endophyte obtained from green leaves of Coffea arabica, during induction experiments by adding halide salts to the culture media. In our studies, 11‐bromoroquefortine D and 11‐bromo‐17‐hydroxybromoroquefortine C were identified by LC/HR‐MS. It is the first time that bromoroquefortine C and D are described as halogenated natural products. These halo alkaloids were shown to be biosynthesized from brominated tryptophan as the biosynthetic precursor. Cytotoxic and antibiotic assays using roquefortine C and 11‐bromoroquefortine C showed that the presence of the 11‐Br substituent impairs some biological activities of this alkaloid.